Power Inductors - Shielded CTIHLP125F Series From .36 µH to 2.2 µH Not shown at actual size. ctparts.com SPECIFICATIONS Parts are only available ±20% inductance tolerance only *Irms DC current (A) will cause an approximately ΔT of 40°C. **Isat DC current (A) will cause L0 to drop approximately 20%. Part Number CTIHLP125F-R36M CTIHLP125F-R47M CTIHLP125F-R50M CTIHLP125F-1R0M CTIHLP125F-2R2M Inductance (µH) 0.36 0.47 0.50 1.00 2.20 L Test Freq. (KHz) 100 100 100 100 100 *Irms Typ. (A) 43 37 37 29 20 **Isat Typ. (A) 50 46 46 37 20 DCR Max. Ω) (mΩ 0.90 1.20 1.20 2.50 5.20 PHYSICAL DIMENSIONS RoHS Size Compliant mm inches A B C D Max. Max. Max. Typ. 12.8 13.8 5.0 3.7 0.50 0.54 0.20 0.14 B A XXX CHARACTERISTICS D C Description: SMD (shielded) power inductor Applications: High density DC/DC converters. POL converters. High current VRM/VRD for notebooks, Servers, and desktop CPUs. High speed chargers. Operating Temperature: -55°C to +125°C Inductance Tolerance: ±20% Testing: Inductance is tested on an HP4285A at 100KHz, 0.5V Packaging: Tape & Reel Marking: Parts are marked with inductance code Miscellaneous: RoHS Compliant. Additional Information: Additional electrical & physical information available upon request Samples available. See website for ordering information. Marking: Inductance Code RECOMMENDED LAND PATTERN Unit: mm 3.5 5.0 11.5 CENTRAL Technologies 07.29.08 Manufacturer of Passive and Discrete Semiconductor Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2008 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice