OPLINK MWDMG15982000H2 Micro-optic wdm Datasheet

Green 980/1550 nm Micro-Optic WDM
MWDMG1598 Series
Product Description
Oplink’s Micro-Optic Wavelength Division Multiplexer (MWDM) is based on
thin-film filter technology and metal bonding micro optics packaging. This
device offers very flat and wide passband, low insertion loss, and high isolation
which makes it ideal for combining pump(980nm) and signal light(1550nm) in
Optical Fiber Amplifier Systems. In DWDM systems, this component is used
in high-power applications. All Oplink products are epoxy-free in the optical
path. Oplink MWDM devices are Bellcore GR-1221 qualification tested.
Performance Specificationns
MWDMG1598 Series
Min
Max
Unit
Pass Channel Wavelength Range λ1
1520
1610
nm
Reflection Channel Wavelength Range λ2
965
995
nm
1.0
0.6
dB
Insertion Loss *
Pass Channel @ λ1
Reflect Channel @ λ2
Isolation
Reflect Channel @ λ1
Pass Channel @ λ2
18
30
dB
Passband Ripple
0.2
dB
Directivity
55
dB
Return Loss
50
dB
Polarization Dependent Loss
0.1
dB
Polarization Mode Dispersion
0.05
ps
500
Maximum Power Handling
Operating Temperature
Storage Temperature
Fiber Type
Package Dimensions **
Port 1 & 3
Port 2
250 μm bare fiber
900 μm loose tube
Features
 Environmental Green Plan
Compliance
 Wide Operating Wavelength Range
 Low Insertion Loss
 High Channel Isolation
 Ultra Flat Wide Passband
 Highly Stable & Reliable
 Epoxy-free Optical Path
mW
Applications
0 to +70
°C
 Fiber Amplifiers
-40 to +85
°C
 WDM Systems
Corning Flexcore 1060
Corning SMF-28
P1: (ø) 5.5 x (L) 34.0
P2: (ø) 5.5 x (L) 40.0
mm
Note:
* All spec excluding connectors.
** The mechanical tolerance should be +/-0.2 mm on all package dimensions unless otherwise custom specified.
*** The maximum IL is under all states of polarization and within the full operating temperature and
wavelength ranges specified.
R01.20081107
Green 980/1550 nm Micro-Optic WDM
MWDMG1598 Series
Mechanical Drawing / Package Dimensions (dimension in mm)
P1: SMF-28 250µm bare fiber
46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: [email protected] • www.oplink.com
P2: 900µm loose tube
Ordering Information
Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink’s OEM
design team or account manager for your requirements and ordering information (510) 933-7200.
MWDMG
1
5
9
Wavelength
8
0
0
0
Package Type
Fiber Length*
250μm bare fiber = 1
900μm loose tube = 2
0.5 Meter = H
1.0 Meter = 1
1.5 Meters = 5
2.0 Meters = 2
Connector Type
None = 1
FC/PC = 2
FC/SPC = 3
FC/APC = 4
SC/PC = 5
SC/SPC = 6
SC/APC = 7
ST = 8
LC = 9
MU = A
* The tolerance of fiber length is +/-0.1m. 1 meter is standard. The lead-time for special fiber
length will be longer.
R01.20081107
Product Lines:  Mux/Demux  Switching/Routing  Coupling/Splitting  Monitoring/Conditioning  Amplification  Transmission  Interconnect  RGB Laser Modules
Similar pages