Illumination LUXEON Z Color Line High power color LEDs in a micro footprint package for ultimate design flexibility The LUXEON Z Color Line comprises a broad portfolio of LEDs that enable never before seen lumen density, flexibility and freedom of design. Available in the full spectrum of colors from 440nm to 670nm, including Lime, enabling highly efficient color mixing with a convenient aboveblackbody color point. The LUXEON Z Color Line is ideal for entertainment and stage lighting, indoor and outdoor architectural lighting, emergency vehicle lighting, remote phosphor applications and a wide spectrum of specialty lighting applications. Features and Benefits Primary Applications Broad selection spanning 440–670nm, including a unique Lime color Architectural 2.2mm² footprint enables unique arrangements in space constrained applications 4-up RGBW pixel in 9.5mm² — four colors in less area than one regular high power color emitter Undomed design allows better optical management Lamps –– Remote Phosphor Specialty Lighting Enables customizable light sources: linear, rectangular, circular DS105 LUXEON Z Color Line Product Datasheet ©2017 Lumileds Holding B.V. All rights reserved. No. E352519 Table of Contents General Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Product Test Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Part Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Lumen Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Performance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Product Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Optical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Electrical and Thermal Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Characteristics Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Spectral Power Distribution Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Forward Current Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Radiation Pattern Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Product Bin and Labeling Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Decoding Product Bin Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Luminous Flux Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Radiometric Power Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Dominant and Peak Wavelength Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Forward Voltage Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Reflow Soldering Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Packaging Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Pocket Tape Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Reel Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 DS105 LUXEON Z Color Line Product Datasheet 20171107 ©2017 Lumileds Holding B.V. All rights reserved. i General Product Information Product Test Conditions LUXEON Z Color Line LEDs are tested and binned with a DC drive current of 500mA at a junction temperature, Tj, of 25°C or 85°C, depending on the product. Part Number Nomenclature Part numbers for LUXEON Z Color Line follow the convention below: L X Z 1 – P A 0 B Where: A – designates color (A=Deep Red, D=Red, H=Red-Orange, L=Amber and PC Amber, X=Lime, M=Green, E=Cyan, B=Blue and R=Royal Blue) B designates color version (example: 1, 2, 3) – Therefore, the following part number is used for a LUXEON Z version 2 Red: L X Z 1 – P D 0 2 Lumen Maintenance Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the longterm performance of this product. Environmental Compliance Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON Z Color Line is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE). DS105 LUXEON Z Color Line Product Datasheet 20171107 ©2017 Lumileds Holding B.V. All rights reserved. 2 Performance Characteristics Product Selection Guide Table 1a. Product performance of LUXEON Z Color Line at 500mA, Tj=25°C. Color Deep Red DOMINANT [1] or PEAK WAVELENGTH [2] (nm) LUMINOUS FLUX [1] (lm) or RADIOMETRIC POWER [3] (mW) Minimum Maximum Minimum Typical 650 670 250 350 Part Number LXZ1-PA01 Red 620 645 40 52 LXZ1-PD01 Red-Orange 610 620 56 65 LXZ1-PH01 Amber 585 590 48 56 LXZ1-PL01 Green 520 540 80 118 LXZ1-PM01 Cyan 490 510 48 82 LXZ1-PE01 Blue 460 480 24 38 LXZ1-PB01 Royal Blue 440 460 500 575 LXZ1-PR01 Table 1b. Product performance of LUXEON Z Color Line at 500mA, Tj=85°C. Color DOMINANT WAVELENGTH [1] (nm) LUMINOUS FLUX [1] (lm) Part Number MINIMUM MaxIMUM MINIMUM Typical Red 624 634 24 43 LXZ1-PD02 Red-Orange 614 624 40 47 LXZ1-PH02 Amber 594 604 16 24 LXZ1-PL03 PC Amber 588 592 72 107 LXZ1-PL02 Lime 566 569 144 175 LXZ1-PX01 Notes for Tables 1a and 1b: 1. Lumileds maintains a tolerance of ±0.5nm for dominant wavelength and ±6.5% on luminous flux measurements. 2. Deep Red and Royal Blue are binned by peak wavelength. All other colors are binned by dominant wavelength. 3. Deep Red and Royal Blue are binned by radiometric power. All other colors are binned by luminous flux. DS105 LUXEON Z Color Line Product Datasheet 20171107 ©2017 Lumileds Holding B.V. All rights reserved. 3 Optical Characteristics Table 2. Optical characteristics for LUXEON Z Color Line at 500mA and specified junction temperature. Color Part Number Typical Spectral Half-width [1] (nm) Typical Temperature Coefficient of Dominant or Peak Wavelength (nm/°C) Typical Total Included Angle [2] Typical Viewing Angle [3] Deep Red LXZ1-PA01 [4] 20 0.06 150° 145° LXZ1-PD01 Red Red-Orange Amber PC Amber Lime 20 0.06 150° 145° LXZ1-PD02 [4, 6] 20 0.06 150° 145° LXZ1-PH01 20 0.06 150° 145° 20 0.06 150° 145° [4] 20 0.10 150° 145° [4, 6] [4] [4] LXZ1-PH02 [4, 6] LXZ1-PL01 LXZ1-PL03 20 0.10 150° 145° LXZ1-PL02 [5] 80 0.01 140° 125° LXZ1-PX01 100 0.01 140° 125° LXZ1-PM01 [5] 30 0.04 140° 125° Cyan LXZ1-PE01 [5] 30 0.03 140° 125° Blue LXZ1-PB01 [5] 20 0.03 140° 125° LXZ1-PR01 [5] 20 0.03 140° 125° Green Royal Blue [5] Notes for Table 2: 1. Spectral width at ½ of the peak intensity. 2. Total angle at which 90% of total luminous flux is captured. 3. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is ½ of the peak value. 4. All Deep Red, Red, Red-orange and Amber products are built with Aluminum Indium Gallium Phosphide (AlInGaP). 5. All PC Amber, Lime, Green, Cyan, Blue and Royal Blue products are built with Indium Gallium Nitride (InGaN). 6. Wavelength ranges for hot tested Red, Red-Orange and Amber have been defined to align with typical changes in spectral output at increased temperature, which are inherent to AlInGaP LEDs. At Tj=25°C these hot-tested parts will have the same typical spectral outputs as their cold-tested counterparts. Electrical and Thermal Characteristics Table 3. Electrical and thermal characteristics for LUXEON Z Color Line at 500mA and specified junction temperature. Color Deep Red Red Red-Orange Amber Forward Voltage [1] (Vf) Typical Thermal Resistance—Junction to Solder Pad (°C/W) Minimum Typical MAXIMUM Typical Temperature Coefficient of Forward Voltage [2] (mV/°C) LXZ1-PA01 1.75 2.20 2.75 -2 to -4 8 LXZ1-PD01 1.75 2.20 2.75 -2 to -4 8 Part Number LXZ1-PD02 1.75 2.20 2.75 -2 to -4 8 LXZ1-PH01 1.75 2.20 2.75 -2 to -4 8 LXZ1-PH02 1.75 2.20 2.75 -2 to -4 8 LXZ1-PL01 1.75 2.15 2.75 -2 to -4 8 LXZ1-PL03 1.75 2.25 2.75 -2 to -4 8 PC Amber LXZ1-PL02 2.50 2.85 3.50 -2 to -4 5 Lime LXZ1-PX01 2.50 2.85 3.50 -2 to -4 5 Green LXZ1-PM01 2.50 3.27 3.50 -2 to -4 5 Cyan LXZ1-PE01 2.50 3.27 3.50 -2 to -4 5 Blue LXZ1-PB01 2.50 2.85 3.50 -2 to -4 5 Royal Blue LXZ1-PR01 2.50 2.85 3.50 -2 to -4 5 Notes for Table 3: 1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements. 2. Measured between 25°C and 85°C. DS105 LUXEON Z Color Line Product Datasheet 20171107 ©2017 Lumileds Holding B.V. All rights reserved. 4 Absolute Maximum Ratings Table 4a. Absolute maximum ratings for LUXEON Z Color Line tested at Tj=25°C. Parameter DC Forward Current [1,2] Peak Pulsed Forward Current [1,3] LED Junction Temperature [1] (DC & Pulse) Green/Cyan/ Blue/Royal Blue Cold-Tested Red/Deep-Red/ Red-Orange/Amber 1000mA 700mA 1000mA 700mA 150°C 135°C ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012) Class 3B Class 3B Operating Case Temperature [1] -40°C to 135°C -40°C to 120°C LED Storage Temperature -40°C to 135°C -40°C to 135°C Soldering Temperature JEDEC 020c 260°C JEDEC 020c 260°C Allowable Reflow Cycles 3 3 Autoclave Conditions -121°C at 2 ATM 100% Relative Humidity for 96 hours Maximum Reverse Voltage (Vreverse) LUXEON LEDs are not designed to be driven in reverse bias Notes for Table 4a: 1. Proper current derating must be observed to maintain junction temperature below the maximum. 2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” with frequencies ≥100Hz and amplitude ≤15% of the maximum allowable DC forward current are acceptable, assuming the average current throughout each cycle does not exceed the maximum allowable DC forward current at the corresponding maximum junction temperature. 3. Pulsed operation with a peak drive current equal to the stated peak pulsed forward current is acceptable if the pulse on-time is ≤5ms per cycle and the duty cycle is ≤50%. Table 4b. Absolute maximum ratings for LUXEON Z Color Line tested at Tj=85°C. Parameter DC Forward Current [1,2] Peak Pulsed Forward Current [1,3] LED Junction Temperature [1] (DC & Pulse) Hot-Tested Red/ Red-Orange/Amber [4] PC Amber/Lime 1000/700mA 700mA 1000/700mA 700mA 120°C/135°C 135°C ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012) Class 3B Class 3B Operating Case Temperature [1] -40°C to 120°C -40°C to 110°C LED Storage Temperature -40°C to 120°C -40°C to 135°C Soldering Temperature JEDEC 020c 260°C JEDEC 020c 260°C Allowable Reflow Cycles 3 3 Autoclave Conditions 100% Relative Humidity for 96 hours Maximum Reverse Voltage (Vreverse) LUXEON LEDs are not designed to be driven in reverse bias Notes for Table 4b: 1. Proper current derating must be observed to maintain junction temperature below the maximum. 2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” with frequencies ≥100Hz and amplitude ≤15% of the maximum allowable DC forward current are acceptable, assuming the average current throughout each cycle does not exceed the maximum allowable DC forward current at the corresponding maximum junction temperature. 3. Pulsed operation with a peak drive current equal to the stated peak pulsed forward current is acceptable if the pulse on-time is ≤5ms per cycle and the duty cycle is ≤50%. 4. Hot Tested LUXEON Z Red (LXZ1-PD02), Red-Orange (LXZ1-PH02) and Amber (LXZ1-PL03) products have two boundary points for maximum conditions: If=1A and Tj=120°C or If=700mA and Tj=135°C. DS105 LUXEON Z Color Line Product Datasheet 20171107 ©2017 Lumileds Holding B.V. All rights reserved. 5 Characteristics Curves Spectral Power Distribution Characteristics Figure 1a. Typical normalized power vs. wavelength for LUXEON Z Red, Red-Orange, Amber, Green, Cyan, Blue and Royal Blue, at 500mA, Tj=25°C. 1 Relative Spectral Power Distribution 0.8 PC Amber 0.6 Lime 0.4 0.2 0 350 400 450 500 550 600 650 700 750 800 Wavelength (nm) Figure 1b. Typical normalized power vs. wavelength for LUXEON Z PC Amber and Lime at 500mA, Tj=85°C. DS105 LUXEON Z Color Line Product Datasheet 20171107 ©2017 Lumileds Holding B.V. All rights reserved. 6 Light Output Characteristics Relative Luminous/Radiant Flux 1.1 1 0.9 Royal Blue (LXZ1-PR01) Radiometric 0.8 Blue (LXZ1-PB01) Photometric 0.7 Cyan (LXZ1-PE01) Photometric Green (LXZ1-PM01) Photometric 0.6 0.5 0 20 40 60 80 100 120 140 Thermal Pad Temperature (°C) Figure 2a. Typical normalized light output vs. junction temperature for LXZ1-PR01, LXZ1-PB01, LXZ1-PE01 and LXZ1-PM01 at 500mA. Relative Luminous/Radiant Flux 1.1 1 0.9 0.8 0.7 0.6 0.5 Amber (LXZ1-PL01) Photometric 0.4 Deep Red (LXZ1-PA01) Radiometric 0.3 0.2 Red (LXZ1-PD01) Photometric 0.1 Red Orange (LXZ1-PH01) Photometric 0 0 20 40 60 80 100 120 140 Thermal Pad Temperature (°C) Figure 2b. Typical normalized light output vs. junction temperature for LXZ1-PL01, LXZ1-PA01, LXZ1-PD01 and LXZ1-PH01 at 500mA. 3 Red-Orange (LXZ1-PH02) Relative Luminous Flux 2.5 Red (LXZ1-PD02) Amber (LXZ1-PL03) 2 Lime (LXZ1-PX01) PC Amber (LXZ1-PL02) 1.5 1 0.5 0 0 20 40 60 80 100 120 140 Junction Temperature (°C) Figure 2c. Typical normalized light output vs. junction temperature for LXZ1-PX01, LXZ1-PL02, LXZ1-PD02, LXZ1-PH02 and LXZ1-PL03 at 500mA. DS105 LUXEON Z Color Line Product Datasheet 20171107 ©2017 Lumileds Holding B.V. All rights reserved. 7 2.0 Relative Luminous/Radiant Flux 1.8 1.6 1.4 1.2 1.0 0.8 0.6 Royal Blue (LXZ1-PR01) Radiometric Blue (LXZ1-PB01) Photometric 0.4 Cyan (LXZ1-PE01) Photometric 0.2 Green (LXZ1-MP01) Photometric 0.0 0 200 400 600 800 1000 1200 Forward Current (mA) Figure 3a. Typical normalized light output vs. forward current for LXZ1-PR01, LXZ1-PB01, LXZ1-PE01 and LXZ1-PM01 at Tj=25°C. 1.4 Relative Luminous Flux 1.2 1.0 0.8 0.6 Amber (LXZ1-PL01) 0.4 Deep Red (LXZ1-PA01) Red (LXZ1-PD01) 0.2 0.0 Red Orange (LXZ1-PH01) 0 100 200 300 400 500 600 700 800 Forward Current (mA) Figure 3b. Typical normalized light output vs. forward current for LXZ1-PL01, LXZ1-PA01, LXZ1-PD01 and LXZ1-PH01 at Tj=25°C. 2 1.8 Relative Luminous Flux 1.6 1.4 1.2 1 0.8 Red (LXZ1-PD02), Red Orange (LXZ1-PH02) and Amber (LXZ1-PL03) 0.6 Lime (LXZ1-PX01) 0.4 PC Amber (LXZ1-PL02) 0.2 0 0 200 400 600 800 1000 1200 Forward Current (mA) Figure 3c. Typical normalized light output vs. forward current for LXZ1-PX01, LXZ1-PL02, LXZ1-PD02, LXZ1-PH02, and LXZ1-PL03 at Tj=85°C. DS105 LUXEON Z Color Line Product Datasheet 20171107 ©2017 Lumileds Holding B.V. All rights reserved. 8 Forward Current Characteristics 1200 Blue (LXZ1-PB01) 1000 Green (LXZ1-PM01) Forw ward Currrent (mA A) Cyan (LXZ1-PE01) Royal-Blue y ((LXZ1-PR01)) 800 600 400 200 0 2.5 2.6 2.7 2.8 2.9 3 3.1 3.2 3.3 3.4 Forward Voltage (V) Figure 4a. Typical forward current vs. forward voltage for LXZ1-PR01, LXZ1-PB01, LXZ1-PE01 and LXZ1-PM01 at Tj=25°C. 800 700 Amber (LXZ1-PL01) Fo orward Current (m mA) 600 Deep Red (LXZ1-PA01) R d (LXZ1 Red (LXZ1-PD01) PD01) 500 Red Orange (LXZ1-PH01) 400 300 200 100 0 1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5 2.6 Forward Voltage (V) Figure 4b. Typical forward current vs. forward voltage for LXZ1-PL01, LXZ1-PA01, LXZ1-PD01 and LXZ1-PH01 at Tj=25°C. 1200 Red-Orange (LXZ1-PH02) Red (LXZ1-PD02) Forward Current (mA) 1000 Amber (LXZ1-PL03) Lime (LXZ1-PX01) 800 PC Amber (LXZ1-PL02) 600 400 200 0 1.8 2 2.2 2.4 2.6 2.8 3 3.2 Forward Voltage (V) Figure 4c. Typical forward current vs. forward voltage for LXZ1-PX01, LXZ1-PL02, LXZ1-PD02, LXZ1-PH02, and LXZ1-PL03 at Tj=85°C. DS105 LUXEON Z Color Line Product Datasheet 20171107 ©2017 Lumileds Holding B.V. All rights reserved. 9 Radiation Pattern Characteristics 120% 100% Relative e Intensity y (%) 80% 60% 40% Blue (LXZ1-PB01) Cyan (LXZ1-PE01) Green (LXZ1-PM01) 20% 0% Royal Blue (LXZ1-PR01) -90 -75 -60 -45 -30 -15 0 15 30 45 60 75 90 Anglular Displacement (deg) Figure 5a. Typical radiation pattern for LUXEON Z LXZ1-PR01, LXZ1-PB01, LXZ1-PE01 and LXZ1-PM01 at 500mA, Tj=25°C. 120% Relative Intensity (%) 100% 80% 60% 40% Red Red Orange Deep Red 20% 0% Amber -90 -75 -60 -45 -30 -15 0 15 30 45 60 75 90 Anglular Displacement (deg) Figure 5b. Typical radiation pattern for LUXEON Z LXZ1-PL01, LXZ1-PA01, LXZ1-PD01, LXZ1-PH01, LXZ1-PL03, LXZ1-PH02 and LXZ1-PD02 at 500mA, Tj=25°C. DS105 LUXEON Z Color Line Product Datasheet 20171107 ©2017 Lumileds Holding B.V. All rights reserved. 10 120% Relative Intensity (%) 100% 80% 60% 40% Lime (LXZ1-PX01) and PC Amber (LXZ1-PL02) 20% 0% -90 -75 -60 -45 -30 -15 0 15 30 45 60 75 90 Anglular Displacement (deg) Figure 5c. Typical radiation pattern for LUXEON Z LXZ1-PX01 and LXZ1-PL02 at 500mA, Tj=85°C. 1 0° -30° 30° 0.8 0.6 -60° 60° 0.4 0.2 -90° 90° 0 Blue (LXZ1-PB01) Cyan (LXZ1-PE01) Green (LXZ1-PM01) Royal Blue (LXZ1-PR01) -120° 120° -150° 150° 180° 180 Figure 6a. Typical polar radiation pattern for LUXEON Z LXZ1-PR01, LXZ1-PB01, LXZ1-PE01 and LXZ1-PM01 at 500mA, Tj=25°C. DS105 LUXEON Z Color Line Product Datasheet 20171107 ©2017 Lumileds Holding B.V. All rights reserved. 11 0° 1 -30° 30° 0.8 0.6 -60° 60° 0.4 0.2 -90° 90° 0 Deep Red Red Orange Red -120° 120° Amber -150° 150° 180° Figure 6b. Typical polar radiation pattern for LUXEON Z LXZ1-PL01, LXZ1-PA01, LXZ1-PD01 and LXZ1-PH01, LXZ1-PL03, LXZ1-PH02 and LXZ1-PD02 at 500mA, Tj=25°C. 1 0° 30° -30° 0.8 0.6 -60° 60° 0.4 0.2 -90° 90° 0 -120° Lime (LXZ1-PX01) and PC Amber (LXZ1-PL02) -150° 120° 150° 180° Figure 6c. Typical polar radiation pattern for LUXEON Z LLXZ1-PX01 and LXZ1-PL02 at 500mA, Tj=85°C. DS105 LUXEON Z Color Line Product Datasheet 20171107 ©2017 Lumileds Holding B.V. All rights reserved. 12 Product Bin and Labeling Definitions Decoding Product Bin Labeling In the manufacturing of semiconductor products, there are variations in performance around the average values given in the technical datasheet. For this reason, Lumileds bins LED components for luminous flux or radiometric power, color point, peak or dominant wavelength and forward voltage. Reels of LUXEON Z Deep Red, Red, Red-Orange, Amber, Lime, Green, Cyan, Blue and Royal Blue are labeled using a 3-digit alphanumeric CAT code following the format below. A B C A – designates luminous flux or radiometric power bins (example: K=96 to 104 lumens, V=194 to 204 lumens) B – designates peak or dominant wavelength bin (example: Green 2=525 to 530nm, Cyan 7=495 to 500nm, Blue 4=475 to 480nm ) C designates forward voltage bin (example: 2=2.50 to 2.75V, 6=3.00 to 3.25V) – Therefore, a LUXEON Z Green LED with a lumen range of 96 to 104, a dominant wavelength of 525 to 530nm and a forward voltage range of 2.50 to 2.75V has the following CAT code: K 2 4 Reels of LUXEON Z PC Amber are labeled using a 4-digit alphanumeric CAT code following the format below. A B C D A – designates luminous flux bin (example: K=96 to 104 lumens, L=104 to 114 lumens) B C – designates peak wavelength bin (example: A1) D designates forward voltage bin (example: 3=2.25 to 2.50V, 5=2.75 to 3.00V) – Therefore, a LUXEON Z PC Amber LED with a lumen range of 104 to 114, color bin of A1 and a forward voltage range of 2.75 to 3.00V has the following CAT code: L A 1 5 DS105 LUXEON Z Color Line Product Datasheet 20171107 ©2017 Lumileds Holding B.V. All rights reserved. 13 Luminous Flux Bins Table 5a and Table 5b list the standard luminous flux bins for LUXEON Z Color Line emitters. Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. Not all bins are available in all CCTs. Table 5a. Luminous flux bin definitions for LUXEON Z Red (LXZ1-PD02), Red-Orange (LXZ1-PH02) and Amber (LXZ1-PL03). BiN Luminous Flux [1 ,2] (lm) Minimum Maximum A 16 24 B 24 32 C 32 40 D 40 48 E 48 56 F 56 64 G 64 72 Notes for Table 5a: 1. Lumileds maintains a tolerance of ±6.5% on luminous flux measurements. 2. Tested and binned at junction temperature of 85°C. Table 5b. Luminous flux bin definitions for LUXEON Z Red (LXZ1-PD01), Red-Orange (LXZ1-PH01), Amber (LXZ1-PL01), PC Amber (LXZ1-PL02), Lime (LXZ1-PX01), Green (LXZ1-PM01), Cyan (LXZ1-PE01), and Blue (LXZ1-PB01). BiN Luminous Flux [1 ,2] (lm) Minimum Maximum A 24 32 B 32 40 C 40 48 D 48 56 E 56 64 F 64 72 G 72 80 H 80 88 J 88 96 K 96 104 L 104 114 M 114 124 N 124 134 P 134 144 Q 144 154 R 154 164 S 164 174 T 174 184 U 184 194 V 194 204 Notes for Table 5b: 1. Lumileds maintains a tolerance of ±6.5% on luminous flux measurements. 2. Tested and binned at junction temperature of 25°C. DS105 LUXEON Z Color Line Product Datasheet 20171107 ©2017 Lumileds Holding B.V. All rights reserved. 14 Radiometric Power Bins Table 6. Radiometric power bins for LUXEON Z Deep Red (LXZ1-PA01) and Royal Blue (LXZ1-PR01). Bin Radiometric Power [1] (mW) Minimum Maximum A 250 300 B 300 350 C 350 400 D 400 450 E 450 500 F 500 550 G 550 600 H 600 650 J 650 700 Notes for Table 6: 1. Lumileds maintains a tolerance of ±6.5% on radiometric power measurements. DS105 LUXEON Z Color Line Product Datasheet 20171107 ©2017 Lumileds Holding B.V. All rights reserved. 15 Dominant and Peak Wavelength Bins Table 7. Dominant wavelength bin definitions for LUXEON Z Color Line. Color Red Red-Orange Amber PC Amber Green Cyan Blue Part Number BIN DOMINANT Wavelength [1] (nm) Minimum Maximum LXZ1-PD02 4 624 634 LXZ1-PD01 4 620 630 LXZ1-PH02 2 614 624 LXZ1-PH01 2 610 620 2 594 599 4 599 604 1 585 587 2 587 590 4 590 592 6 592 595 1 520 525 2 525 530 3 530 535 4 535 540 1 490 498 2 498 508 6 490 495 7 495 500 8 500 505 9 505 510 1 460 465 2 465 470 3 470 475 4 475 480 5 480 485 LXZ1-PL03 LXZ1-PL01 LXZ1-PM01 LXZ1-PE01 LXZ1-PB01 Notes for Table 7: 1. Lumileds maintains a tolerance of ±0.5nm for dominant wavelength measurements. Table 8. Peak wavelenth bin defintions for LUXEON Z Deep Red and Royal Blue. Color Part Number Deep Red LXZ1-PA01 Royal Blue LXZ1-PR01 BIN PEAK Wavelength [1] (nm) Minimum Maximum 6 650 660 7 660 670 3 440 445 4 445 450 5 450 455 6 455 460 Notes for Table 8: 1. Lumileds maintains a tolerane of ±2nm for peak wavelength measurements DS105 LUXEON Z Color Line Product Datasheet 20171107 ©2017 Lumileds Holding B.V. All rights reserved. 16 0.6 Lime 0.55 y PC Amber 0.5 0.45 0.4 0.36 0.41 0.46 0.51 0.56 0.61 x Figure 7. Color bin structure for LXZ1-PX01 and LXZ1-PL02 for Table 9. Table 9. Color bin definitions for LUXEON Z PC Amber and Lime. COLOR PC Amber Lime Part Number LXZ1-P7L02 LXZ1-PX01 Bin A1 1 x y 0.5622 0.4372 0.5576 0.4326 0.5775 0.4132 0.5843 0.4151 0.3819 0.5055 0.4191 0.5790 0.4327 0.5655 0.3972 0.4986 Notes for Table 9: 1. Lumileds maintains a tolerance of ±0.005 on x and y color coordinates measurements. DS105 LUXEON Z Color Line Product Datasheet 20171107 ©2017 Lumileds Holding B.V. All rights reserved. 17 Forward Voltage Bins Table 10. Forward voltage bin definitions for LUXEON Z Color Line. Forward Voltage [1] (Vf) Bin Minimum Maximum 1 1.75 2.00 2 2.00 2.25 3 2.25 2.50 4 2.50 2.75 5 2.75 3.00 6 3.00 3.25 7 3.25 3.50 Notes for Table 10: 1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements. Mechanical Dimensions Figure 8. Mechanical dimensions for LUXEON Z Green, Cyan, Blue and Royal Blue. Notes for Figure 8: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS105 LUXEON Z Color Line Product Datasheet 20171107 ©2017 Lumileds Holding B.V. All rights reserved. 18 Figure 9. Mechanical dimensions for LUXEON Z PC Amber and Lime. Notes for Figure 9: 1. Drawings are not to scale. 2. All dimensions are in millimeters. Figure 10. Mechanical dimensions for LUXEON Z Deep Red, Red, Red-Orange and Amber. Notes for Figure 10: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS105 LUXEON Z Color Line Product Datasheet 20171107 ©2017 Lumileds Holding B.V. All rights reserved. 19 Reflow Soldering Guidelines tp Tp Critical Zone TL to Tp Ramp-up TL Temperature tL Tsmax Tsmin Ramp-down ts Preheat Area 25 Time 25ºC to Peak JEDEC J-STD-020D Time Figure 11. Visualization of the acceptable reflow temperature profile as specified in Table 11. Table 11. Reflow profile characteristics for LUXEON Z Color Line. PROFILE FEATURE Lead Free Assembly Preheat Minimum Temperature (Tsmin) 150°C Preheat Maximum Temperature (Tsmax) 200°C Preheat Time (tsmin to tsmax) 60 to 180 seconds Ramp-Up Rate (TL to Tp) 3°C / second maximum Liquidus Temperature (TL) 217°C Time Maintained Above Temperature TL (tL) 60 to 150 seconds Peak / Classification Temperature (Tp) 260°C Time Within 5°C of Actual Temperature (tp) 20 to 40 seconds Ramp-Down Rate (Tp to TL) 6°C / second maximum Time 25°C to Peak Temperature 8 minutes maximum JEDEC Moisture Sensitivity Table 12. Moisture sensitivity levels for LUXEON Z Color Line. level 1 Floor Life Soak Requirements Standard TIme Conditions Time Conditions Unlimited ≤30°C / 85% RH 168 Hours +5 / -0 85°C / 85% RH DS105 LUXEON Z Color Line Product Datasheet 20171107 ©2017 Lumileds Holding B.V. All rights reserved. 20 Solder Pad Design Figure 12. Recommended PCB solder pad layout for LUXEON Z Color Line. Notes for Figure 12: 1. Drawings are not to scale. 2. All dimensions are in millimeters. Packaging Information Pocket Tape Dimensions Figure 13. Pocket tape dimensions for LUXEON Z Blue, Green, Royal Blue, Cyan, Lime and PC Amber. Notes for Figure 13: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS105 LUXEON Z Color Line Product Datasheet 20171107 ©2017 Lumileds Holding B.V. All rights reserved. 21 Figure 14. Pocket tape dimensions for LUXEON Z Red, Red-Orange, Amber and Deep Red. Notes for Figure 14: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS105 LUXEON Z Color Line Product Datasheet 20171107 ©2017 Lumileds Holding B.V. All rights reserved. 22 Reel Dimensions Figure 15. Reel dimensions for LUXEON Z Color Line. Notes for Figure 15: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS105 LUXEON Z Color Line Product Datasheet 20171107 ©2017 Lumileds Holding B.V. All rights reserved. 23 About Lumileds Companies developing automotive, mobile, IoT and illumination lighting applications need a partner who can collaborate with them to push the boundaries of light. With over 100 years of inventions and industry firsts, Lumileds is a global lighting solutions company that helps customers around the world deliver differentiated solutions to gain and maintain a competitive edge. As the inventor of Xenon technology, a pioneer in halogen lighting and the leader in high performance LEDs, Lumileds builds innovation, quality and reliability into its technology, products and every customer engagement. Together with its customers, Lumileds is making the world safer, better and more beautiful—with light. To learn more about our lighting solutions, visit lumileds.com. ©2017 Lumileds Holding B.V. All rights reserved. LUXEON is a registered trademark of the Lumileds Holding B.V. in the United States and other countries. lumileds.com DS105 LUXEON Z Color Line Product Datasheet 20171107 Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data. A listing of Lumileds product/patent coverage may be accessed at lumileds.com/patents.