10W LED Driver Constant Current Mode 10W-BPH Series www.linkcom.com.tw For more information, please contact with: [email protected] FEATURES: ● AC Input 90~264 Vac Nominal ● AC Inrush current: 40 A at 240 Vac Cold start ● Protection: SCP / OVP / OTP ● High Operating Ambient Temp.: -20℃ ~ +60℃ ● Surge Protection: L-N 0.5 kV ● Safety: UL 1310 / PSE ● EMI: CE / Meets FCC ● Comply with Indoor/Outdoor Waterproof (IP 67) ● Warranty: 2 years (refer to LinkCom warranty policy) ● RoHS Compliant PRODUCT SPECIFICATION DC OUTPUT POWER(W) DC OUTPUT VOLTAGE(V) OUTPUT CURRENT(mA) OUTPUT CURRENT TOLERANCE EFFICIENCY O/P NOISE(P-P,V) BPHE010C201-50 9.6 3-48 216-264 ─ 70% 0.25 BPHE010C251-50 10 3-40 234-286 ─ 70% 0.25 BPHE010C301-50 10.88 3-34 288-352 ─ 70% 0.25 BPHE010C351-50 10.5 3-30 333-407 ─ 70% 0.25 BPHE010C401-50 10 3-25 369-451 ─ 70% 0.25 BPHE010C451-50 10.8 3-24 414-506 ─ 70% 0.25 BPHE010C501-50 10 3-20 459-561 ─ 70% 0.25 BPHE010C601-50 10.2 3-17 549-671 ─ 70% 0.25 BPHE010C701-50 10.5 3-15 636-781 ─ 70% 0.25 BPHE010C751-50 9.75 3-13 684-836 ─ 70% 0.25 BPHE010C801-50 9.6 3-12 729-891 ─ 70% 0.25 MODEL ELECTRICAL SPECIFICATION INPUT VOLTAGE RANGE 90-264 Vac, 127-373 Vdc, Normal: 100-240 Vac INPUT FREQUENCY Range: 47-63 Hz, Normal: 50-60 Hz ACTIVE POWER FACTOR NA THD NA TURN ON DELAY TIME 3200ms, 2000ms at full load 115 Vac / 230 Vac AC CURRENT <0.3 A 110 Vac; <0.15A 230 Vac INRUSH CURRENT (typ) Cold Start 40 A at 240 Vac LEAKAGE CURRENT < 0.7 mA / 264 Vac SHORT CIRCUIT PROTECTION SCP will restart automatically after the fault condition is removed OVER VOLTAGE PROTECTION OVP will restart automatically after the fault condition is removed OVER TEMP. PROTECTION OTP will restart automatically after the fault condition is removed OVER CURRENT PROTECTION NA -20 ℃ ~ +60 ℃ OPERATING TEMP. -40 ℃ ~ +80 ℃ STORAGE TEMP. RELATIVE HUMIDITY 10% to +90%, non-cond. SAFETY UL 1310 / PSE EMI EN55015 / Meets FCC Part15 WITHSTAND VOLTAGE ISOLATION RESISTANCE DIMENSION (L*W*H) I/P-O/P:4.242 kVdc I/P-CASE:4 kVdc I/P-O/P :100M Ω / 500 Vdc / 25℃ / 70% RH 97.5 * 40 * 30.5 mm【3.84 * 1.57 * 1.2 inch】 (1) All parameters specified at 230 Vac input unless otherwise noted. (2) All specifications typical at 25℃, unless otherwise noted, at normal line and load. (3) Ripple and noise measured directly at pins/terminals at nom. load, 0.1uF bypass and 47uF electrolytic, pk-pk at 20MHz bandwidth. (4) Specified for free-air convection cooling. (5) Minimum load is NOT required for proper operation . (6) 100% Production tested. *REFERENCE: www.linkcom.com.tw *Please contact [email protected], [email protected] for more information Linkcom Manufacturing Co., Ltd. 5F., No. 127, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231-45, Taiwan ▪ T: +886-2-8919-1380 ▪ F: +886-2-8919-1370 ▪ www.linkcom.com.tw 10W LED Driver Constant Current Mode 10W-BPH Series www.linkcom.com.tw For more information, please contact with: [email protected] DIMENSIONS Tc Max. BPHE010C451 as Tc Max. Reference *REFERENCE: www.linkcom.com.tw Linkcom Manufacturing Co., Ltd. 5F., No. 127, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231-45, Taiwan ▪ T: +886-2-8919-1380 ▪ F: +886-2-8919-1370 ▪ www.linkcom.com.tw 10W LED Driver Constant Current Mode 10W-BPH Series www.linkcom.com.tw For more information, please contact with: [email protected] Output Current vs. Load(BPHE010C701) Output Current vs. Load 0.720 Output Current (A) 0.700 0.680 0.660 Vin=100 0.640 Vin=120 Vin=200 0.620 Vin=230 Vin=264 0.600 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 110% Load (%) Efficiency vs. Load(BPHE010C701) Efficiency vs. Load 80.0% Efficiency (%) 70.0% 60.0% 50.0% 40.0% Vin=100 30.0% Vin=120 Vin=200 20.0% Vin=230 10.0% Vin=264 0.0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 110% Load(%) Linkcom Manufacturing Co., Ltd. 5F., No. 127, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231-45, Taiwan ▪ T: +886-2-8919-1380 ▪ F: +886-2-8919-1370 ▪ www.linkcom.com.tw