TI1 LM4040CIM3X-4.1/NOPB Lm4040-n/-q1 precision micropower shunt voltage reference Datasheet

Product
Folder
Sample &
Buy
Support &
Community
Tools &
Software
Technical
Documents
LM4040-N, LM4040-N-Q1
SNOS633K – OCTOBER 2000 – REVISED JUNE 2016
LM4040-N/-Q1 Precision Micropower Shunt Voltage Reference
1 Features
3 Description
•
•
•
•
•
Ideal for space-critical applications, the LM4040-N
precision voltage reference is available in the subminiature SC70 and SOT-23 surface-mount package.
The advanced design of the LM4040-N eliminates the
need for an external stabilizing capacitor while
ensuring stability with any capacitive load, thus
making the LM4040-N easy to use. Further reducing
design effort is the availability of several fixed reverse
breakdown voltages: 2.048 V, 2.5 V, 3 V, 4.096 V, 5
V, 8.192 V, and 10 V. The minimum operating current
increases from 60 μA for the 2.5-V LM4040-N to 100
μA for the 10-V LM4040-N. All versions have a
maximum operating current of 15 mA.
1
•
SOT-23 AEC Q-100 Grades 1 and 3 Available
Small Packages: SOT-23, TO-92, and SC70
No Output Capacitor Required
Tolerates Capacitive Loads
Fixed Reverse Breakdown Voltages of 2.048 V,
2.5 V, 3 V, 4.096 V, 5 V, 8.192 V, and 10 V
Key Specifications (2.5-V LM4040-N)
– Output Voltage Tolerance (A Grade, 25°C):
±0.1% (Maximum)
– Low Output Noise (10 Hz to 10 kHz): 35 μVrms
(Typical)
– Wide Operating Current Range: 60 μA to 15
mA
– Industrial Temperature Range: −40°C to +85°C
– Extended Temperature Range: −40°C to
+125°C
– Low Temperature Coefficient: 100 ppm/°C
(Maximum)
Also available is the LM4041-N with two reverse
breakdown voltage versions: adjustable and 1.2 V.
See the LM4041-N data sheet (SNOS641).
2 Applications
•
•
•
•
•
•
•
•
The LM4040-N uses a fuse and Zener-zap reverse
breakdown voltage trim during wafer sort to ensure
that the prime parts have an accuracy of better than
±0.1% (A grade) at 25°C. Bandgap reference
temperature drift curvature correction and low
dynamic
impedance
ensure
stable
reverse
breakdown voltage accuracy over a wide range of
operating temperatures and currents.
Portable, Battery-Powered Equipment
Data Acquisition Systems
Instrumentation
Process Controls
Energy Management
Product Testing
Automotives
Precision Audio Components
Device Information(1)
PART NUMBER
LM4040-N
LM4040-N-Q1
PACKAGE
BODY SIZE (NOM)
TO-92 (3)
4.30 mm × 4.30 mm
SC70 (5)
2.00 mm × 1.25 mm
SOT-23 (3)
2.92 mm × 1.30 mm
SOT-23 (3)
2.92 mm × 1.30 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Shunt Reference Application Schematic
VDD
RS
VOUT
Cathode
LM4040
Anode
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
LM4040-N, LM4040-N-Q1
SNOS633K – OCTOBER 2000 – REVISED JUNE 2016
www.ti.com
Table of Contents
1
2
3
4
5
6
Features ..................................................................
Applications ...........................................................
Description .............................................................
Revision History.....................................................
Pin Configuration and Functions .........................
Specifications.........................................................
6.17 Electrical Characteristics: 5-V LM4040-N VR
Tolerance Grades 'C' And 'D'; Temperature Grade
'I'...............................................................................
6.18 Electrical Characteristics: 5-V LM4040-N VR
Tolerance Grades 'C' And 'D'; Temperature Grade
'E' .............................................................................
6.19 Electrical Characteristics: 8.2-V LM4040-N VR
Tolerance Grades 'A' And 'B'; Temperature Grade
'I'...............................................................................
6.20 Electrical Characteristics: 8.2-V Lm4040-N VR
Tolerance Grades 'C' And 'D'; Temperature Grade
'I'...............................................................................
6.21 Electrical Characteristics: 10-V LM4040-N VR
Tolerance Grades 'A' And 'B'; Temperature Grade
'I'...............................................................................
6.22 Electrical Characteristics: 10-V LM4040-N VR
Tolerance Grades 'C' And 'D'; Temperature Grade
'I'...............................................................................
6.23 Typical Characteristics ..........................................
1
1
1
3
4
5
6.1
6.2
6.3
6.4
6.5
Absolute Maximum Ratings ...................................... 5
ESD Ratings.............................................................. 5
Recommended Operating Conditions....................... 6
Thermal Information .................................................. 6
Electrical Characteristics: 2-V LM4040-N VR
Tolerance Grades 'A' And 'B'; Temperature Grade 'I' 7
6.6 Electrical Characteristics: 2-V LM4040-N VR
Tolerance Grades 'C', 'D', And 'E'; Temperature
Grade 'I'...................................................................... 8
6.7 Electrical Characteristics: 2-V LM4040-N VR
Tolerance Grades 'C', 'D', And 'E'; Temperature
Grade 'E' .................................................................. 10
6.8 Electrical Characteristics: 2.5-V LM4040-N VR
Tolerance Grades 'A' And 'B'; Temperature Grade 'I'
(AEC Grade 3) ......................................................... 11
6.9 Electrical Characteristics: 2.5-V LM4040-N VR
Tolerance Grades 'C', 'D', and 'E'; Temperature Grade
'I' (AEC Grade 3)...................................................... 13
6.10 Electrical Characteristics: 2.5-V LM4040-N VR
Tolerance Grades 'C', 'D', And 'E'; Temperature
Grade 'E' (AEC Grade 1) ......................................... 15
6.11 Electrical Characteristics: 3-V LM4040-N VR
Tolerance Grades 'A' And 'B'; Temperature Grade
'I'............................................................................... 17
6.12 Electrical Characteristics: 3-V LM4040-N VR
Tolerance Grades 'C', 'D', And 'E'; Temperature
Grade 'I'.................................................................... 18
6.13 Electrical Characteristics: 3-V LM4040-N VR
Tolerance Grades 'C', 'D', And 'E'; Temperature
Grade 'E' .................................................................. 20
6.14 Electrical Characteristics: 4.1-V LM4040-N VR
Tolerance Grades 'A' And 'B'; Temperature Grade
'I'............................................................................... 21
6.15 Electrical Characteristics: 4.1-V LM4040-N VR
Tolerance Grades 'C' and 'D'; Temperature Grade
'I'............................................................................... 22
6.16 Electrical Characteristics: 5-V LM4040-N VR
Tolerance Grades 'A' And 'B'; Temperature Grade
'I'............................................................................... 23
2
Submit Documentation Feedback
7
8
26
27
28
29
30
31
Parameter Measurement Information ................ 32
Detailed Description ............................................ 33
8.1
8.2
8.3
8.4
9
24
Overview .................................................................
Functional Block Diagram .......................................
Feature Description.................................................
Device Functional Modes........................................
33
33
33
33
Application and Implementation ........................ 34
9.1 Application Information............................................ 34
9.2 Typical Applications ................................................ 34
10 Power Supply Recommendations ..................... 41
11 Layout................................................................... 41
11.1 Layout Guidelines ................................................. 41
11.2 Layout Example .................................................... 41
12 Device and Documentation Support ................. 42
12.1
12.2
12.3
12.4
12.5
12.6
Documentation Support ........................................
Related Links ........................................................
Community Resources..........................................
Trademarks ...........................................................
Electrostatic Discharge Caution ............................
Glossary ................................................................
42
42
42
42
42
42
13 Mechanical, Packaging, And Orderable
Information ........................................................... 42
13.1 SOT-23 and SC70 Package Marking Information 42
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
www.ti.com
SNOS633K – OCTOBER 2000 – REVISED JUNE 2016
4 Revision History
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.
Changes from Revision J (August 2015) to Revision K
•
Page
Updated pinout diagrams ...................................................................................................................................................... 4
Changes from Revision I (April 2015) to Revision J
•
Page
Added ESD Ratings table, Feature Description section, Device Functional Modes section, Application and
Implementation section, Power Supply Recommendations section, Layout section, Device and Documentation
Support section, and Mechanical, Packaging, and Orderable Information section ............................................................... 1
Changes from Revision H (April 2013) to Revision I
•
Page
Added some of the latest inclusions from new TI formatting and made available of the automotive grade for the
SOT-23 package..................................................................................................................................................................... 1
Changes from Revision G (July 2012) to Revision H
•
Page
Changed layout of National Data Sheet to TI format ............................................................................................................. 1
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
Submit Documentation Feedback
3
LM4040-N, LM4040-N-Q1
SNOS633K – OCTOBER 2000 – REVISED JUNE 2016
www.ti.com
5 Pin Configuration and Functions
DBZ Package
3-Pin SOT-23
Top View
LP Package
3-Pin TO-92
Bottom View
1
NC
+
+
±
3(1)
2
±
DCK Package
5-Pin SC70
Top View
1
5
±
NC
NC(2)
2
3
4
+
NC
Pin Functions
PIN
I/O
DESCRIPTION
NAME
SOT-23
TO-92
SC70
Anode
2
1
1
O
Anode pin, normally grounded
Cathode
1
2
3
I/O
Shunt Current/Output Voltage
NC
3
(1)
—
2
(2)
—
Must float or connect to anode
NC
—
3
4, 5
—
No connect
(1)
(2)
4
This pin must be left floating or connected to pin 2.
This pin must be left floating or connected to pin 1.
Submit Documentation Feedback
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
www.ti.com
SNOS633K – OCTOBER 2000 – REVISED JUNE 2016
6 Specifications
6.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted) (1) (2)
MIN
Reverse current
Forward current
Power dissipation (TA =
25°C) (3)
Soldering temperature (4)
(3)
(4)
mA
10
mA
306
mW
TO-92 (Z) package
550
mW
SC70 (M7) package
241
mW
SOT-23 (M3) Package Peak Reflow (30 sec)
260
°C
TO-92 (Z) Package Soldering (10 sec)
260
°C
260
°C
150
°C
SC70 (M7) Package Peak Reflow (30 sec)
(2)
UNIT
20
SOT-23 (M3) package
Storage temperature
(1)
MAX
–65
Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended
Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and
specifications.
The maximum power dissipation must be derated at elevated temperatures and is dictated by TJmax (maximum junction temperature),
RθJA (junction to ambient thermal resistance), and TA (ambient temperature). The maximum allowable power dissipation at any
temperature is PDmax = (TJmax − TA)/RθJA or the number given in the Absolute Maximum Ratings, whichever is lower. For the LM4040-N,
TJmax = 125°C, and the typical thermal resistance (RθJA), when board mounted, is 326°C/W for the SOT-23 package, and 180°C/W with
0.4″ lead length and 170°C/W with 0.125″ lead length for the TO-92 package and 415°C/W for the SC70 Package.
For definitions of Peak Reflow Temperatures for Surface Mount devices, see the TI Absolute Maximum Ratings for Soldering Application
Report (SNOA549).
6.2 ESD Ratings
VALUE
V(ESD)
(1)
(2)
Electrostatic discharge
Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001 (1)
±2000
Charged-device model (CDM), per JEDEC specification JESD22C101 (2)
±200
UNIT
V
JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
Submit Documentation Feedback
5
LM4040-N, LM4040-N-Q1
SNOS633K – OCTOBER 2000 – REVISED JUNE 2016
www.ti.com
6.3 Recommended Operating Conditions
over operating free-air temperature range (unless otherwise noted) (1) (2)
MIN
Temperature
(Tmin ≤ TA ≤ Tmax)
Reverse Current
(1)
(2)
Industrial Temperature
–40°C ≤ TA ≤ 85
Extended Temperature
–40 ≤ TA ≤ 125°C
MAX
UNIT
°C
°C
LM4040-N-2.0
60
15
μA to mA
LM4040-N-2.5
60
15
μA to mA
LM4040-N-3.0
62
15
μA to mA
LM4040-N-4.1
68
15
μA to mA
LM4040-N-5.0
74
15
μA to mA
LM4040-N-8.2
91
15
μA to mA
LM4040-N-10.0
100
15
μA to mA
Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Recommended Operating Conditions indicate
conditions for which the device is functional, but do not ensure specific performance limits. For ensured specifications and test
conditions, see the Electrical Characteristics. The ensured specifications apply only for the test conditions listed. Some performance
characteristics may degrade when the device is not operated under the listed test conditions.
The maximum power dissipation must be derated at elevated temperatures and is dictated by TJmax (maximum junction temperature),
RθJA (junction to ambient thermal resistance), and TA (ambient temperature). The maximum allowable power dissipation at any
temperature is PDmax = (TJmax − TA)/RθJA or the number given in the Absolute Maximum Ratings, whichever is lower. For the LM4040-N,
TJmax = 125°C, and the typical thermal resistance (RθJA), when board mounted, is 326°C/W for the SOT-23 package, and 180°C/W with
0.4″ lead length and 170°C/W with 0.125″ lead length for the TO-92 package and 415°C/W for the SC70 package.
6.4 Thermal Information
LM4040-N/LM4040-N-Q1
THERMAL METRIC (1)
DBZ (SOT-23)
LP (TO-92)
DCK (SC70)
5 PINS
UNIT
3 PINS
3 PINS
RθJA
Junction-to-ambient thermal resistance
291.9
166
267
°C/W
RθJC(top)
Junction-to-case (top) thermal resistance
114.3
88.2
95.6
°C/W
RθJB
Junction-to-board thermal resistance
62.3
145.2
48.1
°C/W
ψJT
Junction-to-top characterization parameter
7.4
32.5
2.4
°C/W
ψJB
Junction-to-board characterization parameter
61
N/A
47.3
°C/W
RθJC(bot)
Junction-to-case (bottom) thermal resistance
N/A
N/A
N/A
°C/W
(1)
6
For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application
report, SPRA953.
Submit Documentation Feedback
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
www.ti.com
SNOS633K – OCTOBER 2000 – REVISED JUNE 2016
6.5 Electrical Characteristics: 2-V LM4040-N VR Tolerance Grades 'A' And 'B'; Temperature
Grade 'I'
all other limits TA = TJ = 25°C. The grades A and B designate initial Reverse Breakdown Voltage tolerances of ±0.1% and
±0.2%, respectively.
PARAMETER
Reverse Breakdown
Voltage
VR
IRMIN
Reverse Breakdown
Voltage Tolerance (2)
ΔVR/ΔI
R
IR = 100 μA
Reverse Breakdown
Voltage Change with
Operating Current
Change (3)
TYP
MAX (1)
UNIT
2.048
IR = 100 μA
V
LM4040AIM3
LM4040AIZ
±2
LM4040BIM3
LM4040BIZ
LM4040BIM7
±4.1
mV
LM4040AIM3
LM4040AIZ
TA = TJ = TMIN to
TMAX
±15
LM4040BIM3
LM4040BIZ
LM4040BIM7
TA = TJ = TMIN to
TMAX
±17
TA = TJ = 25°C
Minimum Operating
Current
Average Reverse
Breakdown Voltage
ΔVR/ΔT
Temperature
Coefficient (2)
MIN (1)
TEST CONDITIONS
mV
45
TA = TJ = TMIN to TMAX
IR = 10 mA
60
±20
TA = TJ = 25°C
IR = 1 mA
ppm/°C
±15
TA = TJ = TMIN to TMAX
IR = 100 μA
±100
±15
IRMIN ≤ IR ≤ 1 mA
1 mA ≤ IR ≤ 15 mA
TA = TJ = 25°C
0.3
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
μA
65
ppm/°C
ppm/°C
0.8
1
2.5
TA = TJ = TMIN to TMAX
6
8
mV
mV
ZR
Reverse Dynamic
Impedance
IR = 1 mA, f = 120
Hz,
IAC = 0.1 IR
0.3
eN
Wideband Noise
IR = 100 μA
10 Hz ≤ f ≤ 10 kHz
35
μVrms
ΔVR
Reverse Breakdown
Voltage Long Term
Stability
t = 1000 hrs
T = 25°C ±0.1°C
IR = 100 μA
120
ppm
VHYST
Thermal Hysteresis (4)
ΔT = –40°C to 125°C
(1)
(2)
(3)
(4)
0.8
Ω
0.08%
Limits are 100% production tested at 25°C. Limits over temperature are ensured through correlation using Statistical Quality Control
(SQC) methods. The limits are used to calculate AOQL.
The overtemperature limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage
Tolerance ±[(ΔVR/ΔT)(maxΔT)(VR)]. Where, ΔVR/ΔT is the VR temperature coefficient, maxΔT is the maximum difference in temperature
from the reference point of 25°C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the
different grades in the industrial temperature range where maxΔT = 65°C is shown below:
A-grade: ±0.75% = ±0.1% ±100 ppm/°C × 65°C
B-grade: ±0.85% = ±0.2% ±100 ppm/°C × 65°C
C-grade: ±1.15% = ±0.5% ±100 ppm/°C × 65°C
D-grade: ±1.98% = ±1.0% ±150 ppm/°C × 65°C
E-grade: ±2.98% = ±2.0% ±150 ppm/°C × 65°C
The total overtemperature tolerance for the different grades in the extended temperature range where max ΔT = 100 °C is shown below:
C-grade: ±1.5% = ±0.5% ±100 ppm/°C × 100°C
D-grade: ±2.5% = ±1.0% ±150 ppm/°C × 100°C
E-grade: ±3.5% = ±2.0% ±150 ppm/°C × 100°C
Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of ±2.5 V ×
0.75% = ±19 mV.
Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change
must be taken into account separately.
Thermal hysteresis is defined as the difference in voltage measured at 25°C after cycling to temperature -40°C and the 25°C
measurement after cycling to temperature 125°C.
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
Submit Documentation Feedback
7
LM4040-N, LM4040-N-Q1
SNOS633K – OCTOBER 2000 – REVISED JUNE 2016
www.ti.com
6.6 Electrical Characteristics: 2-V LM4040-N VR Tolerance Grades 'C', 'D', And 'E'; Temperature
Grade 'I'
all other limits TA = TJ = 25°C. The grades C, D and E designate initial Reverse Breakdown Voltage tolerances of ±0.5%, ±1%
and ±2%, respectively.
PARAMETER
Reverse Breakdown
Voltage
VR
IRMIN
MIN (1)
TEST CONDITIONS
IR = 100 μA
Reverse Breakdown
I = 100 μA
Voltage Tolerance (3) R
Minimum Operating
Current
ΔVR/ΔT
IR = 1 mA
TA = TJ = 25°C
±10
TA = TJ = TMIN to TMAX
±23
LM4040DIM3
LM4040DIZ
LM4040DIM7
TA = TJ = 25°C
±20
TA = TJ = TMIN to TMAX
±40
LM4040EIZ
LM4040EIM7
TA = TJ = 25°C
±41
LM4040CIM3
LM4040CIZ
LM4040CIM7
TA = TJ = 25°C
LM4040DIM3
LM4040DIZ
LM4040DIM7
TA = TJ = 25°C
LM4040EIZ
LM4040EIM7
TA = TJ = 25°C
TA = TJ = TMIN to TMAX
(2)
(3)
8
UNIT
V
LM4040CIM3
LM4040CIZ
LM4040CIM7
mV
±60
45
TA = TJ = TMIN to TMAX
60
65
45
TA = TJ = TMIN to TMAX
65
μA
70
45
TA = TJ = TMIN to TMAX
65
70
±20
LM4040CIM3
LM4040CIZ
LM4040CIM7
TA = TJ = 25°C
LM4040DIM3
LM4040DIZ
LM4040DIM7
TA = TJ = 25°C
LM4040EIZ
LM4040EIM7
TA = TJ = 25°C
±15
TA = TJ = TMIN to TMAX
±100
±15
TA = TJ = TMIN to TMAX
ppm/°C
±150
±15
TA = TJ = TMIN to TMAX
±150
IR = 100 μA
(1)
MAX (1)
2.048
IR = 10 mA
Average Reverse
Breakdown Voltage
Temperature
Coefficient (3)
TYP (2)
±15
Limits are 100% production tested at 25°C. Limits over temperature are ensured through correlation using Statistical Quality Control
(SQC) methods. The limits are used to calculate AOQL.
Typicals are at TJ = 25°C and represent most likely parametric norm.
The overtemperature limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage
Tolerance ±[(ΔVR/ΔT)(maxΔT)(VR)]. Where, ΔVR/ΔT is the VR temperature coefficient, maxΔT is the maximum difference in temperature
from the reference point of 25°C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the
different grades in the industrial temperature range where maxΔT = 65°C is shown below:
A-grade: ±0.75% = ±0.1% ±100 ppm/°C × 65°C
B-grade: ±0.85% = ±0.2% ±100 ppm/°C × 65°C
C-grade: ±1.15% = ±0.5% ±100 ppm/°C × 65°C
D-grade: ±1.98% = ±1.0% ±150 ppm/°C × 65°C
E-grade: ±2.98% = ±2.0% ±150 ppm/°C × 65°C
The total overtemperature tolerance for the different grades in the extended temperature range where max ΔT = 100 °C is shown below:
C-grade: ±1.5% = ±0.5% ±100 ppm/°C × 100°C
D-grade: ±2.5% = ±1.0% ±150 ppm/°C × 100°C
E-grade: ±3.5% = ±2.0% ±150 ppm/°C × 100°C
Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of ±2.5V ×
0.75% = ±19 mV.
Submit Documentation Feedback
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
www.ti.com
SNOS633K – OCTOBER 2000 – REVISED JUNE 2016
Electrical Characteristics: 2-V LM4040-N VR Tolerance Grades 'C', 'D', And 'E'; Temperature
Grade 'I' (continued)
all other limits TA = TJ = 25°C. The grades C, D and E designate initial Reverse Breakdown Voltage tolerances of ±0.5%, ±1%
and ±2%, respectively.
PARAMETER
TEST CONDITIONS
IRMIN ≤ IR ≤ 1 mA
ΔVR/ΔIR
Reverse Breakdown
Voltage Change
with Operating
Current Change (4)
1 mA ≤ IR ≤ 15 mA
ZR
eN
ΔVR
VHYST
(4)
(5)
Reverse Dynamic
Impedance
IR = 1 mA, f = 120 Hz
IAC = 0.1 IR
Wideband Noise
IR = 100 μA
10 Hz ≤ f ≤ 10 kHz
Reverse Breakdown
Voltage Long Term
Stability
t = 1000 hrs
T = 25°C ±0.1°C
IR = 100 μA
Thermal
Hysteresis (5)
ΔT = −40°C to 125°C
LM4040CIM3
LM4040CIZ
LM4040CIM7
TA = TJ = 25°C
LM4040DIM3
LM4040DIZ
LM4040DIM7
TA = TJ = 25°C
LM4040EIZ
LM4040EIM7
TA = TJ = 25°C
LM4040CIM3
LM4040CIZ
LM4040CIM7
TA = TJ = 25°C
LM4040DIM3
LM4040DIZ
LM4040DIM7
TA = TJ = 25°C
LM4040EIZ
LM4040EIM7
TA = TJ = 25°C
MIN (1)
TYP (2)
MAX (1)
0.3
0.8
TA = TJ = TMIN to TMAX
UNIT
1
0.3
TA = TJ = TMIN to TMAX
1
1.2
0.3
TA = TJ = TMIN to TMAX
1
1.2
2.5
TA = TJ = TMIN to TMAX
mV
6
8
2.5
TA = TJ = TMIN to TMAX
8
10
2.5
TA = TJ = TMIN to TMAX
8
10
LM4040CIM3
LM4040CIZ
LM4040CIM7
0.3
0.9
LM4040DIM3
LM4040DIZ
LM4040DIM7
0.3
1.1
LM4040EIZ
LM4040EIM7
0.3
1.1
Ω
35
μVrms
120
ppm
0.08%
Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change
must be taken into account separately.
Thermal hysteresis is defined as the difference in voltage measured at 25°C after cycling to temperature –40°C and the 25°C
measurement after cycling to temperature 125°C.
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
Submit Documentation Feedback
9
LM4040-N, LM4040-N-Q1
SNOS633K – OCTOBER 2000 – REVISED JUNE 2016
www.ti.com
6.7 Electrical Characteristics: 2-V LM4040-N VR Tolerance Grades 'C', 'D', And 'E'; Temperature
Grade 'E'
all other limits TA = TJ = 25°C. The grades C, D and E designate initial Reverse Breakdown Voltage tolerances of ±0.5%, ±1%
and ±2%, respectively.
PARAMETER
Reverse Breakdown
Voltage
IR = 100 μA
Reverse Breakdown
Voltage Tolerance (3)
IR = 100 μA
LM4040DEM3
LM4040EEM3
LM4040CEM3
IRMIN
Minimum Operating
Current
LM4040DEM3
LM4040EEM3
LM4040DEM3
LM4040EEM3
±10
±30
TA = TJ = 25°C
±20
TA = TJ = TMIN to TMAX
±50
TA = TJ = 25°C
±41
45
TA = TJ = TMIN to TMAX
R
LM4040DEM3
LM4040EEM3
Reverse Breakdown
Voltage Change with
Operating Current
Change (4)
LM4040CEM3
1 mA ≤ IR ≤ 15 mA
LM4040DEM3
LM4040EEM3
(1)
(2)
(3)
(4)
10
60
68
TA = TJ = 25°C
45
TA = TJ = TMIN to TMAX
65
73
TA = TJ = 25°C
45
TA = TJ = TMIN to TMAX
μA
65
73
TA = TJ = 25°C
±15
TA = TJ = TMIN to TMAX
±100
TA = TJ = 25°C
±15
TA = TJ = TMIN to TMAX
±150
TA = TJ = 25°C
ppm/°C
±15
TA = TJ = TMIN to TMAX
±150
±15
LM4040CEM3
ΔVR/ΔI
mV
±70
TA = TJ = 25°C
IR = 100 μA
IRMIN ≤ IR ≤ 1 mA
V
TA = TJ = TMIN to TMAX
TA = TJ = TMIN to TMAX
UNIT
±20
LM4040CEM3
IR = 1 mA
MAX (1)
TA = TJ = 25°C
IR = 10 mA
Average Reverse
Breakdown Voltage
ΔVR/ΔT
Temperature
Coefficient (3)
TYP (2)
2.048
LM4040CEM3
VR
MIN (1)
TEST CONDITIONS
TA = TJ = 25°C
0.3
TA = TJ = TMIN to TMAX
0.8
1
TA = TJ = 25°C
0.3
TA = TJ = TMIN to TMAX
1
1.2
TA = TJ = 25°C
0.3
TA = TJ = TMIN to TMAX
1
1.2
TA = TJ = 25°C
2.5
TA = TJ = TMIN to TMAX
6
mV
8
TA = TJ = 25°C
2.5
TA = TJ = TMIN to TMAX
8
10
TA = TJ = 25°C
2.5
TA = TJ = TMIN to TMAX
8
10
Limits are 100% production tested at 25°C. Limits over temperature are ensured through correlation using Statistical Quality Control
(SQC) methods. The limits are used to calculate AOQL.
Typicals are at TJ = 25°C and represent most likely parametric norm.
The overtemperature limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage
Tolerance ±[(ΔVR/ΔT)(maxΔT)(VR)]. Where, ΔVR/ΔT is the VR temperature coefficient, maxΔT is the maximum difference in temperature
from the reference point of 25°C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the
different grades in the industrial temperature range where maxΔT = 65°C is shown below:
A-grade: ±0.75% = ±0.1% ±100 ppm/°C × 65°C
B-grade: ±0.85% = ±0.2% ±100 ppm/°C × 65°C
C-grade: ±1.15% = ±0.5% ±100 ppm/°C × 65°C
D-grade: ±1.98% = ±1.0% ±150 ppm/°C × 65°C
E-grade: ±2.98% = ±2.0% ±150 ppm/°C × 65°C
The total overtemperature tolerance for the different grades in the extended temperature range where max ΔT = 100 °C is shown below:
C-grade: ±1.5% = ±0.5% ±100 ppm/°C × 100°C
D-grade: ±2.5% = ±1.0% ±150 ppm/°C × 100°C
E-grade: ±3.5% = ±2.0% ±150 ppm/°C × 100°C
Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of ±2.5V ×
0.75% = ±19 mV.
Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change
must be taken into account separately.
Submit Documentation Feedback
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
www.ti.com
SNOS633K – OCTOBER 2000 – REVISED JUNE 2016
Electrical Characteristics: 2-V LM4040-N VR Tolerance Grades 'C', 'D', And 'E'; Temperature
Grade 'E' (continued)
all other limits TA = TJ = 25°C. The grades C, D and E designate initial Reverse Breakdown Voltage tolerances of ±0.5%, ±1%
and ±2%, respectively.
PARAMETER
ZR
eN
ΔVR
VHYST
(5)
Reverse Dynamic
Impedance
MIN (1)
TYP (2)
MAX (1)
LM4040CEM3
0.3
0.9
LM4040DEM3
0.3
1.1
LM4040EEM3
0.3
1.1
TEST CONDITIONS
IR = 1 mA, f = 120 Hz,
IAC = 0.1 IR
Wideband Noise
IR = 100 μA
10 Hz ≤ f ≤ 10 kHz
Reverse Breakdown
Voltage Long Term
Stability
t = 1000 hrs
T = 25°C ±0.1°C
IR = 100 μA
Thermal
Hysteresis (5)
ΔT = −40°C to 125°C
UNIT
Ω
35
μVrms
120
ppm
0.08%
Thermal hysteresis is defined as the difference in voltage measured at 25°C after cycling to temperature –40°C and the 25°C
measurement after cycling to temperature 125°C.
6.8 Electrical Characteristics: 2.5-V LM4040-N VR Tolerance Grades 'A' And 'B'; Temperature
Grade 'I' (AEC Grade 3)
all other limits TA = TJ = 25°C. The grades A and B designate initial Reverse Breakdown Voltage tolerances of ±0.1% and
±0.2%, respectively.
PARAMETER
Reverse Breakdown
Voltage
VR
IRMIN
Reverse Breakdown
Voltage Tolerance (3)
(2)
(3)
IR = 100 μA
MIN (1)
TYP (2)
MAX (1)
UNIT
2.5
IR = 100 μA
V
LM4040AIM3
LM4040AIZ
LM4040AIM3
TA = TJ = 25°C
±2.5
TA = TJ = TMIN to TMAX
±19
LM4040BIM3
LM4040BIZ
LM4040BIM7
LM4040QBIM3
TA = TJ = 25°C
±21
45
TA = TJ = TMIN to TMAX
IR = 10 mA
mV
±5
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
Minimum Operating
Current
Average Reverse
Breakdown Voltage
ΔVR/ΔT
Temperature
Coefficient (3)
(1)
TEST CONDITIONS
60
μA
65
±20
TA = TJ = 25°C
IR = 1 mA
±15
TA = TJ = TMIN to TMAX
IR = 100 μA
±100
ppm/°C
±15
Limits are 100% production tested at 25°C. Limits over temperature are ensured through correlation using Statistical Quality Control
(SQC) methods. The limits are used to calculate AOQL.
Typicals are at TJ = 25°C and represent most likely parametric norm.
The overtemperature limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage
Tolerance ±[(ΔVR/ΔT)(maxΔT)(VR)]. Where, ΔVR/ΔT is the VR temperature coefficient, maxΔT is the maximum difference in temperature
from the reference point of 25°C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the
different grades in the industrial temperature range where maxΔT = 65°C is shown below:
A-grade: ±0.75% = ±0.1% ±100 ppm/°C × 65°C
B-grade: ±0.85% = ±0.2% ±100 ppm/°C × 65°C
C-grade: ±1.15% = ±0.5% ±100 ppm/°C × 65°C
D-grade: ±1.98% = ±1.0% ±150 ppm/°C × 65°C
E-grade: ±2.98% = ±2.0% ±150 ppm/°C × 65°C
The total overtemperature tolerance for the different grades in the extended temperature range where max ΔT = 100 °C is shown below:
C-grade: ±1.5% = ±0.5% ±100 ppm/°C × 100°C
D-grade: ±2.5% = ±1.0% ±150 ppm/°C × 100°C
E-grade: ±3.5% = ±2.0% ±150 ppm/°C × 100°C
Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of ±2.5V ×
0.75% = ±19 mV.
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
Submit Documentation Feedback
11
LM4040-N, LM4040-N-Q1
SNOS633K – OCTOBER 2000 – REVISED JUNE 2016
www.ti.com
Electrical Characteristics: 2.5-V LM4040-N VR Tolerance Grades 'A' And 'B'; Temperature Grade
'I' (AEC Grade 3) (continued)
all other limits TA = TJ = 25°C. The grades A and B designate initial Reverse Breakdown Voltage tolerances of ±0.1% and
±0.2%, respectively.
PARAMETER
MIN (1)
TEST CONDITIONS
TA = TJ = 25°C
TYP (2)
MAX (1)
0.3
0.8
UNIT
Reverse Breakdown
Voltage Change with
Operating Current
Change (4)
IRMIN ≤ IR ≤ 1 mA
ZR
Reverse Dynamic
Impedance
IR = 1 mA, f = 120 Hz,
IAC = 0.1 IR
0.3
eN
Wideband Noise
IR = 100 μA
10 Hz ≤ f ≤ 10 kHz
35
μVrms
ΔVR
Reverse Breakdown
Voltage Long Term
Stability
t = 1000 hrs
T = 25°C ±0.1°C
IR = 100 μA
120
ppm
VHYST
Thermal Hysteresis (5)
ΔT = −40°C to 125°C
ΔVR/ΔI
R
(4)
(5)
12
1 mA ≤ IR ≤ 15 mA
TA = TJ = TMIN to TMAX
1
TA = TJ = 25°C
2.5
TA = TJ = TMIN to TMAX
6
mV
8
0.8
Ω
0.08%
Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change
must be taken into account separately.
Thermal hysteresis is defined as the difference in voltage measured at 25°C after cycling to temperature –40°C and the 25°C
measurement after cycling to temperature 125°C.
Submit Documentation Feedback
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
www.ti.com
SNOS633K – OCTOBER 2000 – REVISED JUNE 2016
6.9 Electrical Characteristics: 2.5-V LM4040-N VR Tolerance Grades 'C', 'D', and 'E';
Temperature Grade 'I' (AEC Grade 3)
all other limits TA = TJ = 25°C. The grades C, D and E designate initial Reverse Breakdown Voltage tolerances of ±0.5%, ±1%
and ±2%, respectively.
PARAMETER
Reverse Breakdown
Voltage
VR
IRMIN
Reverse Breakdown
Voltage Tolerance (3)
MIN (1)
TEST CONDITIONS
IR = 100 μA
IR = 100 μA
Minimum Operating
Current
Average Reverse
Breakdown Voltage
Temperature
Coefficient (3)
(2)
(3)
UNIT
V
LM4040CIZ
LM4040CIM3
LM4040CIM7
LM4040QCIM3
TA = TJ = 25°C
±12
TA = TJ = TMIN to TMAX
±29
LM4040DIZ
LM4040DIM3
LM4040DIM7
LM4040QDIM3
TA = TJ = 25°C
±25
TA = TJ = TMIN to TMAX
±49
LM4040EIZ
LM4040EIM3
LM4040EIM7
LM4040QEIM3
TA = TJ = 25°C
±50
TA = TJ = TMIN to TMAX
±74
LM4040CIZ
LM4040CIM3
LM4040CIM7
LM4040QCIM3
TA = TJ = 25°C
LM4040DIZ
LM4040DIM3
LM4040DIM7
LM4040QDIM3
TA = TJ = 25°C
LM4040EIZ
LM4040EIM3
LM4040EIM7
LM4040QEIM3
TA = TJ = 25°C
LM4040CIZ
LM4040CIM3
LM4040CIM7
LM4040QCIM3
TA = TJ = 25°C
LM4040DIZ
LM4040DIM3
LM4040DIM7
LM4040QDIM3
TA = TJ = 25°C
LM4040EIZ
LM4040EIM3
LM4040EIM7
LM4040QEIM3
TA = TJ = 25°C
45
TA = TJ = TMIN to TMAX
mV
60
65
45
TA = TJ = TMIN to TMAX
65
μA
70
45
TA = TJ = TMIN to TMAX
65
70
±20
IR = 1 mA
±15
TA = TJ = TMIN to TMAX
±100
±15
TA = TJ = TMIN to TMAX
±150
ppm/°C
±15
TA = TJ = TMIN to TMAX
IR = 100 μA
(1)
MAX (1)
2.5
IR = 10 mA
ΔVR/ΔT
TYP (2)
±150
±15
Limits are 100% production tested at 25°C. Limits over temperature are ensured through correlation using Statistical Quality Control
(SQC) methods. The limits are used to calculate AOQL.
Typicals are at TJ = 25°C and represent most likely parametric norm.
The overtemperature limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage
Tolerance ±[(ΔVR/ΔT)(maxΔT)(VR)]. Where, ΔVR/ΔT is the VR temperature coefficient, maxΔT is the maximum difference in temperature
from the reference point of 25°C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the
different grades in the industrial temperature range where maxΔT = 65°C is shown below:
A-grade: ±0.75% = ±0.1% ±100 ppm/°C × 65°C
B-grade: ±0.85% = ±0.2% ±100 ppm/°C × 65°C
C-grade: ±1.15% = ±0.5% ±100 ppm/°C × 65°C
D-grade: ±1.98% = ±1.0% ±150 ppm/°C × 65°C
E-grade: ±2.98% = ±2.0% ±150 ppm/°C × 65°C
The total overtemperature tolerance for the different grades in the extended temperature range where max ΔT = 100 °C is shown below:
C-grade: ±1.5% = ±0.5% ±100 ppm/°C × 100°C
D-grade: ±2.5% = ±1.0% ±150 ppm/°C × 100°C
E-grade: ±3.5% = ±2.0% ±150 ppm/°C × 100°C
Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of ±2.5V ×
0.75% = ±19 mV.
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
Submit Documentation Feedback
13
LM4040-N, LM4040-N-Q1
SNOS633K – OCTOBER 2000 – REVISED JUNE 2016
www.ti.com
Electrical Characteristics: 2.5-V LM4040-N VR Tolerance Grades 'C', 'D', and 'E'; Temperature
Grade 'I' (AEC Grade 3) (continued)
all other limits TA = TJ = 25°C. The grades C, D and E designate initial Reverse Breakdown Voltage tolerances of ±0.5%, ±1%
and ±2%, respectively.
PARAMETER
IRMIN ≤ IR ≤ 1 mA
ΔVR/ΔI
R
Reverse Breakdown
Voltage Change with
Operating Current
Change (4)
1 mA ≤ IR ≤ 15 mA
ZR
eN
ΔVR
VHYST
(4)
(5)
14
Reverse Dynamic
Impedance
MIN (1)
TEST CONDITIONS
IR = 1 mA, f = 120 Hz
IAC = 0.1 IR
Wideband Noise
IR = 100 μA
10 Hz ≤ f ≤ 10 kHz
Reverse Breakdown
Voltage Long Term
Stability
t = 1000 hrs
T = 25°C ±0.1°C
IR = 100 μA
Thermal
Hysteresis (5)
ΔT= −40°C to 125°C
LM4040CIZ
LM4040CIM3
LM4040CIM7
LM4040QCIM3
TA = TJ = 25°C
LM4040DIZ
LM4040DIM3
LM4040DIM7
LM4040QDIM3
TA = TJ = 25°C
LM4040EIZ
LM4040EIM3
LM4040EIM7
LM4040QEIM3
TA = TJ = 25°C
LM4040CIZ
LM4040CIM3
LM4040CIM7
LM4040QCIM3
TA = TJ = 25°C
LM4040DIZ
LM4040DIM3
LM4040DIM7
LM4040QDIM3
TA = TJ = 25°C
LM4040EIZ
LM4040EIM3
LM4040EIM7
LM4040QEIM3
TA = TJ = 25°C
TYP (2)
MAX (1)
0.3
0.8
TA = TJ = TMIN to TMAX
UNIT
1
0.3
TA = TJ = TMIN to TMAX
1
1.2
0.3
TA = TJ = TMIN to TMAX
1
1.2
2.5
TA = TJ = TMIN to TMAX
6
mV
8
2.5
TA = TJ = TMIN to TMAX
8
10
2.5
TA = TJ = TMIN to TMAX
8
10
LM4040CIZ
LM4040CIM3
LM4040CIM7
LM4040QCIM3
0.3
0.9
LM4040DIZ
LM4040DIM3
LM4040DIM7
LM4040QDIM3
0.3
1.1
LM4040EIZ
LM4040EIM3
LM4040EIM7
LM4040QEIM3
0.3
1.1
Ω
35
μVrms
120
ppm
0.08%
Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change
must be taken into account separately.
Thermal hysteresis is defined as the difference in voltage measured at 25°C after cycling to temperature –40°C and the 25°C
measurement after cycling to temperature 125°C.
Submit Documentation Feedback
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
www.ti.com
SNOS633K – OCTOBER 2000 – REVISED JUNE 2016
6.10 Electrical Characteristics: 2.5-V LM4040-N VR Tolerance Grades 'C', 'D', And 'E';
Temperature Grade 'E' (AEC Grade 1)
all other limits TA = TJ = 25°C. The grades C, D and E designate initial Reverse Breakdown Voltage tolerances of ±0.5%, ±1%
and ±2%, respectively.
PARAMETER
Reverse Breakdown
Voltage
VR
IRMIN
IR = 100 μA
Minimum Operating
Current
ΔVR/ΔT
±12
TA = TJ = TMIN to TMAX
±38
LM4040DEM3
LM4040QDEM3
TA = TJ = 25°C
±25
TA = TJ = TMIN to TMAX
±63
LM4040EEM3
LM4040QEEM3
TA = TJ = 25°C
±50
LM4040CEM3
LM4040QCEM3
TA = TJ = 25°C
LM4040DEM3
LM4040QDEM3
TA = TJ = 25°C
LM4040EEM3
LM4040QEEM3
TA = TJ = 25°C
TA = TJ = TMIN to TMAX
(2)
(3)
(4)
mV
±88
45
TA = TJ = TMIN to TMAX
60
68
45
TA = TJ = TMIN to TMAX
65
μA
73
45
TA = TJ = TMIN to TMAX
65
73
±20
IR = 1 mA
LM4040CEM3
LM4040QCEM3
TA = TJ = 25°C
LM4040DEM3
LM4040QDEM3
TA = TJ = 25°C
LM4040EEM3
LM4040QEEM3
TA = TJ = 25°C
LM4040CEM3
LM4040QCEM3
TA = TJ = 25°C
LM4040DEM3
LM4040QDEM3
TA = TJ = 25°C
LM4040EEM3
LM4040QEEM3
TA = TJ = 25°C
LM4040CEM3
LM4040QCEM3
TA = TJ = 25°C
LM4040DEM3
LM4040QDEM3
TA = TJ = 25°C
LM4040EEM3
LM4040QEEM3
TA = TJ = 25°C
±15
TA = TJ = TMIN to TMAX
±100
±15
TA = TJ = TMIN to TMAX
±150
ppm/°C
±15
TA = TJ = TMIN to TMAX
±150
±15
Reverse Breakdown
Voltage Change
with Operating
Current Change (4)
1 mA ≤ IR ≤ 15 mA
(1)
UNIT
V
TA = TJ = 25°C
IR = 10 mA
IRMIN ≤ IR ≤ 1 mA
R
MAX (1)
LM4040CEM3
LM4040QCEM3
IR = 100 μA
ΔVR/ΔI
TYP (2)
2.5
Reverse Breakdown
I = 100 μA
Voltage Tolerance (3) R
Average Reverse
Breakdown Voltage
Temperature
Coefficient (3)
MIN (1)
TEST CONDITIONS
0.3
TA = TJ = TMIN to TMAX
1
0.3
TA = TJ = TMIN to TMAX
1
1.2
0.3
TA = TJ = TMIN to TMAX
1
1.2
2.5
TA = TJ = TMIN to TMAX
6
mV
8
2.5
TA = TJ = TMIN to TMAX
TA = TJ = TMIN to TMAX
0.8
8
10
2.5
8
10
Limits are 100% production tested at 25°C. Limits over temperature are ensured through correlation using Statistical Quality Control
(SQC) methods. The limits are used to calculate AOQL.
Typicals are at TJ = 25°C and represent most likely parametric norm.
The overtemperature limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage
Tolerance ±[(ΔVR/ΔT)(maxΔT)(VR)]. Where, ΔVR/ΔT is the VR temperature coefficient, maxΔT is the maximum difference in temperature
from the reference point of 25°C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the
different grades in the industrial temperature range where maxΔT = 65°C is shown below:
A-grade: ±0.75% = ±0.1% ±100 ppm/°C × 65°C
B-grade: ±0.85% = ±0.2% ±100 ppm/°C × 65°C
C-grade: ±1.15% = ±0.5% ±100 ppm/°C × 65°C
D-grade: ±1.98% = ±1.0% ±150 ppm/°C × 65°C
E-grade: ±2.98% = ±2.0% ±150 ppm/°C × 65°C
The total overtemperature tolerance for the different grades in the extended temperature range where max ΔT = 100 °C is shown below:
C-grade: ±1.5% = ±0.5% ±100 ppm/°C × 100°C
D-grade: ±2.5% = ±1.0% ±150 ppm/°C × 100°C
E-grade: ±3.5% = ±2.0% ±150 ppm/°C × 100°C
Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of ±2.5V ×
0.75% = ±19 mV.
Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change
must be taken into account separately.
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
Submit Documentation Feedback
15
LM4040-N, LM4040-N-Q1
SNOS633K – OCTOBER 2000 – REVISED JUNE 2016
www.ti.com
Electrical Characteristics: 2.5-V LM4040-N VR Tolerance Grades 'C', 'D', And 'E'; Temperature
Grade 'E' (AEC Grade 1) (continued)
all other limits TA = TJ = 25°C. The grades C, D and E designate initial Reverse Breakdown Voltage tolerances of ±0.5%, ±1%
and ±2%, respectively.
PARAMETER
ZR
eN
ΔVR
VHYST
(5)
16
Reverse Dynamic
Impedance
MIN (1)
TYP (2)
MAX (1)
LM4040CEM3
LM4040QCEM3
0.3
0.9
LM4040DEM3
LM4040QDEM3
0.3
1.1
LM4040EEM3
LM4040QEEM3
0.3
1.1
TEST CONDITIONS
IR = 1 mA, f = 120 Hz,
IAC = 0.1 IR
Wideband Noise
IR = 100 μA
10 Hz ≤ f ≤ 10 kHz
Reverse Breakdown
Voltage Long Term
Stability
t = 1000 hrs
T = 25°C ±0.1°C
IR = 100 μA
Thermal
Hysteresis (5)
ΔT= −40°C to 125°C
UNIT
Ω
35
μVrms
120
ppm
0.08%
Thermal hysteresis is defined as the difference in voltage measured at +25°C after cycling to temperature -40°C and the 25°C
measurement after cycling to temperature 125°C.
Submit Documentation Feedback
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
www.ti.com
SNOS633K – OCTOBER 2000 – REVISED JUNE 2016
6.11 Electrical Characteristics: 3-V LM4040-N VR Tolerance Grades 'A' And 'B'; Temperature
Grade 'I'
all other limits TA = TJ = 25°C. The grades A and B designate initial Reverse Breakdown Voltage tolerances of ±0.1% and
±0.2%, respectively.
PARAMETER
Reverse Breakdown
Voltage
VR
IRMIN
Reverse Breakdown
Voltage Tolerance (3)
TEST CONDITIONS
IR = 100 μA
TYP (2)
MAX (1)
UNIT
3
IR = 100 μA
LM4040AIM3
LM4040AIZ
TA = TJ = 25°C
LM4040BIM3
LM4040BIZ
LM4040BIM7
TA = TJ = 25°C
±22
±6
TA = TJ = TMIN to TMAX
mV
±26
47
TA = TJ = TMIN to TMAX
IR = 10 mA
V
±3
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
Minimum Operating
Current
Average Reverse
Breakdown Voltage
ΔVR/ΔT
Temperature
Coefficient (3)
MIN (1)
62
μA
67
±20
TA = TJ = 25°C
IR = 1 mA
±15
TA = TJ = TMIN to TMAX
IR = 100 μA
±100
ppm/°C
±15
TA = TJ = 25°C
0.6
0.8
Reverse Breakdown
Voltage Change with
Operating Current
Change (4)
IRMIN ≤ IR ≤ 1 mA
ZR
Reverse Dynamic
Impedance
IR = 1 mA, f = 120 Hz,
IAC = 0.1 IR
0.4
eN
Wideband Noise
IR = 100 μA
10 Hz ≤ f ≤ 10 kHz
35
μVrms
ΔVR
Reverse Breakdown
Voltage Long Term
Stability
t = 1000 hrs
T = 25°C ±0.1°C
IR = 100 μA
120
ppm
VHYST
Thermal Hysteresis (5)
ΔT = −40°C to 125°C
ΔVR/ΔI
R
(1)
(2)
(3)
(4)
(5)
1 mA ≤ IR ≤ 15 mA
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
1.1
2.7
TA = TJ = TMIN to TMAX
6
mV
9
Ω
0.9
0.08%
Limits are 100% production tested at 25°C. Limits over temperature are ensured through correlation using Statistical Quality Control
(SQC) methods. The limits are used to calculate AOQL.
Typicals are at TJ = 25°C and represent most likely parametric norm.
The overtemperature limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage
Tolerance ±[(ΔVR/ΔT)(maxΔT)(VR)]. Where, ΔVR/ΔT is the VR temperature coefficient, maxΔT is the maximum difference in temperature
from the reference point of 25°C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the
different grades in the industrial temperature range where maxΔT = 65°C is shown below:
A-grade: ±0.75% = ±0.1% ±100 ppm/°C × 65°C
B-grade: ±0.85% = ±0.2% ±100 ppm/°C × 65°C
C-grade: ±1.15% = ±0.5% ±100 ppm/°C × 65°C
D-grade: ±1.98% = ±1.0% ±150 ppm/°C × 65°C
E-grade: ±2.98% = ±2.0% ±150 ppm/°C × 65°C
The total overtemperature tolerance for the different grades in the extended temperature range where max ΔT = 100 °C is shown below:
C-grade: ±1.5% = ±0.5% ±100 ppm/°C × 100°C
D-grade: ±2.5% = ±1.0% ±150 ppm/°C × 100°C
E-grade: ±3.5% = ±2.0% ±150 ppm/°C × 100°C
Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of ±2.5V ×
0.75% = ±19 mV.
Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change
must be taken into account separately.
Thermal hysteresis is defined as the difference in voltage measured at +25°C after cycling to temperature -40°C and the 25°C
measurement after cycling to temperature 125°C.
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
Submit Documentation Feedback
17
LM4040-N, LM4040-N-Q1
SNOS633K – OCTOBER 2000 – REVISED JUNE 2016
www.ti.com
6.12 Electrical Characteristics: 3-V LM4040-N VR Tolerance Grades 'C', 'D', And 'E';
Temperature Grade 'I'
all other limits TA = TJ = 25°C. The grades C, D and E designate initial Reverse Breakdown Voltage tolerances of ±0.5%, ±1%
and ±2%, respectively.
PARAMETER
Reverse Breakdown
Voltage
VR
IRMIN
MIN (1)
TEST CONDITIONS
IR = 100 μA
Reverse Breakdown
I = 100 μA
Voltage Tolerance (3) R
Minimum Operating
Current
IR = 1 mA
TA = TJ = 25°C
±15
TA = TJ = TMIN to TMAX
±34
LM4040DIM3
LM4040DIZ
LM4040DIM7
TA = TJ = 25°C
±30
TA = TJ = TMIN to TMAX
±59
LM4040EIM7
LM4040EIZ
TA = TJ = 25°C
±60
LM4040CIM3
LM4040CIZ
LM4040CIM7
TA = TJ = 25°C
LM4040DIM3
LM4040DIZ
LM4040DIM7
TA = TJ = 25°C
LM4040EIM7
LM4040EIZ
TA = TJ = 25°C
TA = TJ = TMIN to TMAX
(2)
(3)
18
UNIT
V
LM4040CIM3
LM4040CIZ
LM4040CIM7
mV
±89
45
TA = TJ = TMIN to TMAX
60
65
45
TA = TJ = TMIN to TMAX
65
μA
70
45
TA = TJ = TMIN to TMAX
65
70
±20
LM4040CIM3
LM4040CIZ
LM4040CIM7
TA = TJ = 25°C
LM4040DIM3
LM4040DIZ
LM4040DIM7
TA = TJ = 25°C
LM4040EIM7
LM4040EIZ
TA = TJ = 25°C
±15
TA = TJ = TMIN to TMAX
±100
±15
TA = TJ = TMIN to TMAX
ppm/°C
±150
±15
TA = TJ = TMIN to TMAX
±150
IR = 100 μA
(1)
MAX (1)
3
IR = 10 mA
Average Reverse
Breakdown Voltage
ΔVR/ΔT
Temperature
Coefficient (3)
TYP (2)
±15
Limits are 100% production tested at 25°C. Limits over temperature are ensured through correlation using Statistical Quality Control
(SQC) methods. The limits are used to calculate AOQL.
Typicals are at TJ = 25°C and represent most likely parametric norm.
The overtemperature limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage
Tolerance ±[(ΔVR/ΔT)(maxΔT)(VR)]. Where, ΔVR/ΔT is the VR temperature coefficient, maxΔT is the maximum difference in temperature
from the reference point of 25°C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the
different grades in the industrial temperature range where maxΔT = 65°C is shown below:
A-grade: ±0.75% = ±0.1% ±100 ppm/°C × 65°C
B-grade: ±0.85% = ±0.2% ±100 ppm/°C × 65°C
C-grade: ±1.15% = ±0.5% ±100 ppm/°C × 65°C
D-grade: ±1.98% = ±1.0% ±150 ppm/°C × 65°C
E-grade: ±2.98% = ±2.0% ±150 ppm/°C × 65°C
The total overtemperature tolerance for the different grades in the extended temperature range where max ΔT = 100 °C is shown below:
C-grade: ±1.5% = ±0.5% ±100 ppm/°C × 100°C
D-grade: ±2.5% = ±1.0% ±150 ppm/°C × 100°C
E-grade: ±3.5% = ±2.0% ±150 ppm/°C × 100°C
Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of ±2.5V ×
0.75% = ±19 mV.
Submit Documentation Feedback
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
www.ti.com
SNOS633K – OCTOBER 2000 – REVISED JUNE 2016
Electrical Characteristics: 3-V LM4040-N VR Tolerance Grades 'C', 'D', And 'E'; Temperature
Grade 'I' (continued)
all other limits TA = TJ = 25°C. The grades C, D and E designate initial Reverse Breakdown Voltage tolerances of ±0.5%, ±1%
and ±2%, respectively.
PARAMETER
TEST CONDITIONS
IRMIN ≤ IR ≤ 1 mA
ΔVR/ΔI
R
Reverse Breakdown
Voltage Change
with Operating
Current Change (4)
1 mA ≤ IR ≤ 15 mA
ZR
eN
ΔVR
VHYST
(4)
(5)
Reverse Dynamic
Impedance
IR = 1 mA, f = 120 Hz
IAC = 0.1 IR
Wideband Noise
IR = 100 μA
10 Hz ≤ f ≤ 10 kHz
Reverse Breakdown
Voltage Long Term
Stability
t = 1000 hrs
T = 25°C ±0.1°C
IR = 100 μA
Thermal
Hysteresis (5)
ΔT = −40°C to 125°C
LM4040CIM3
LM4040CIZ
LM4040CIM7
TA = TJ = 25°C
LM4040DIM3
LM4040DIZ
LM4040DIM7
TA = TJ = 25°C
LM4040EIM7
LM4040EIZ
TA = TJ = 25°C
LM4040CIM3
LM4040CIZ
LM4040CIM7
TA = TJ = 25°C
LM4040DIM3
LM4040DIZ
LM4040DIM7
TA = TJ = 25°C
LM4040EIM7
LM4040EIZ
TA = TJ = 25°C
MIN (1)
TYP (2)
MAX (1)
0.4
0.8
TA = TJ = TMIN to TMAX
UNIT
1.1
0.4
TA = TJ = TMIN to TMAX
1.1
1.3
0.4
TA = TJ = TMIN to TMAX
1.1
1.3
2.7
TA = TJ = TMIN to TMAX
6
mV
9
2.7
TA = TJ = TMIN to TMAX
8
11
2.7
TA = TJ = TMIN to TMAX
8
11
LM4040CIM3
LM4040CIZ
LM4040CIM7
0.4
0.9
LM4040DIM3
LM4040DIZ
LM4040DIM7
0.4
1.2
LM4040EIM7
LM4040EIZ
0.4
1.2
Ω
35
μVrms
120
ppm
0.08%
Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change
must be taken into account separately.
Thermal hysteresis is defined as the difference in voltage measured at +25°C after cycling to temperature -40°C and the 25°C
measurement after cycling to temperature 125°C.
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
Submit Documentation Feedback
19
LM4040-N, LM4040-N-Q1
SNOS633K – OCTOBER 2000 – REVISED JUNE 2016
www.ti.com
6.13 Electrical Characteristics: 3-V LM4040-N VR Tolerance Grades 'C', 'D', And 'E';
Temperature Grade 'E'
all other limits TA = TJ = 25°C. The grades C, D and E designate initial Reverse Breakdown Voltage tolerances of ±0.5%, ±1%
and ±2%, respectively.
PARAMETER
MIN (1)
TEST CONDITIONS
Reverse Breakdown
IR = 100 μA
Voltage
Reverse Breakdown
I = 100 μA
Voltage Tolerance (3) R
LM4040DEM3
LM4040EEM3
LM4040CEM3
IRMIN
Minimum Operating
Current
LM4040DEM3
LM4040EEM3
±15
TA = TJ = TMIN to TMAX
±45
TA = TJ = 25°C
±30
TA = TJ = TMIN to TMAX
±75
TA = TJ = 25°C
IR = 1 mA
LM4040DEM3
LM4040EEM3
±60
TA = TJ = TMIN to TMAX
±105
TA = TJ = 25°C
47
TA = TJ = TMIN to TMAX
47
TA = TJ = TMIN to TMAX
ΔVR/ΔIR
LM4040DEM3
LM4040EEM3
LM4040CEM3
1 mA ≤ IR ≤ 15 mA
LM4040DEM3
LM4040EEM3
(1)
(2)
(3)
(4)
20
67
75
TA = TJ = 25°C
47
TA = TJ = TMIN to TMAX
μA
67
75
TA = TJ = 25°C
±15
TA = TJ = TMIN to TMAX
±100
TA = TJ = 25°C
±15
TA = TJ = TMIN to TMAX
±150
TA = TJ = 25°C
ppm/°C
±15
TA = TJ = TMIN to TMAX
±150
±15
LM4040CEM3
Reverse Breakdown
Voltage Change
with Operating
Current Change (4)
62
70
TA = TJ = 25°C
IR = 100 μA
IRMIN ≤ IR ≤ 1 mA
mV
±20
LM4040CEM3
ΔVR/ΔT
UNIT
V
TA = TJ = 25°C
IR = 10 mA
Average Reverse
Breakdown Voltage
Temperature
Coefficient (3)
MAX (1)
3
LM4040CEM3
VR
TYP (2)
TA = TJ = 25°C
0.4
TA = TJ = TMIN to TMAX
0.8
1.1
TA = TJ = 25°C
0.4
TA = TJ = TMIN to TMAX
1.1
1.3
TA = TJ = 25°C
0.4
TA = TJ = TMIN to TMAX
1.1
1.3
TA = TJ = 25°C
2.7
TA = TJ = TMIN to TMAX
6.0
mV
9
TA = TJ = 25°C
2.7
TA = TJ = TMIN to TMAX
8
11.0
TA = TJ = 25°C
2.7
TA = TJ = TMIN to TMAX
8
11.0
Limits are 100% production tested at 25°C. Limits over temperature are ensured through correlation using Statistical Quality Control
(SQC) methods. The limits are used to calculate AOQL.
Typicals are at TJ = 25°C and represent most likely parametric norm.
The (overtemperature) limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage
Tolerance ±[(ΔVR/ΔT)(maxΔT)(VR)]. Where, ΔVR/ΔT is the VR temperature coefficient, maxΔT is the maximum difference in temperature
from the reference point of 25°C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the
different grades in the industrial temperature range where maxΔT = 65°C is shown below:
A-grade: ±0.75% = ±0.1% ±100 ppm/°C × 65°C
B-grade: ±0.85% = ±0.2% ±100 ppm/°C × 65°C
C-grade: ±1.15% = ±0.5% ±100 ppm/°C × 65°C
D-grade: ±1.98% = ±1.0% ±150 ppm/°C × 65°C
E-grade: ±2.98% = ±2.0% ±150 ppm/°C × 65°C
The total overtemperature tolerance for the different grades in the extended temperature range where max ΔT = 100 °C is shown below:
C-grade: ±1.5% = ±0.5% ±100 ppm/°C × 100°C
D-grade: ±2.5% = ±1.0% ±150 ppm/°C × 100°C
E-grade: ±3.5% = ±2.0% ±150 ppm/°C × 100°C
Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of ±2.5V ×
0.75% = ±19 mV.
Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change
must be taken into account separately.
Submit Documentation Feedback
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
www.ti.com
SNOS633K – OCTOBER 2000 – REVISED JUNE 2016
Electrical Characteristics: 3-V LM4040-N VR Tolerance Grades 'C', 'D', And 'E'; Temperature
Grade 'E' (continued)
all other limits TA = TJ = 25°C. The grades C, D and E designate initial Reverse Breakdown Voltage tolerances of ±0.5%, ±1%
and ±2%, respectively.
PARAMETER
ZR
eN
ΔVR
VHYST
(5)
Reverse Dynamic
Impedance
Wideband Noise
MIN (1)
TYP (2)
MAX (1)
LM4040CEM3
0.4
0.9
LM4040DEM3
0.4
1.2
LM4040EEM3
0.4
1.2
TEST CONDITIONS
IR = 1 mA, f = 120
Hz,
IAC = 0.1 IR
IR = 100 μA
10 Hz ≤ f ≤ 10 kHz
Reverse Breakdown t = 1000 hrs
Voltage Long Term T = 25°C ±0.1°C
Stability
IR = 100 μA
Thermal
Hysteresis (5)
ΔT = −40°C to 125°C
UNIT
Ω
35
μVrms
120
ppm
0.08%
Thermal hysteresis is defined as the difference in voltage measured at +25°C after cycling to temperature -40°C and the 25°C
measurement after cycling to temperature 125°C.
6.14 Electrical Characteristics: 4.1-V LM4040-N VR Tolerance Grades 'A' And 'B'; Temperature
Grade 'I'
all other limits TA = TJ = 25°C. The grades A and B designate initial Reverse Breakdown Voltage tolerances of ±0.1% and
±0.2%, respectively.
PARAMETER
Reverse Breakdown
Voltage
VR
IRMIN
Reverse Breakdown
Voltage Tolerance (3)
ΔVR/ΔI
R
(1)
(2)
(3)
(4)
IR = 100 μA
Reverse Breakdown
Voltage Change with
Operating Current
Change (4)
TYP (2)
MAX (1)
4.096
IR = 100 μA
TA = TJ = 25°C
TA = TJ = TMIN to TMAX
±31
LM4040BIM3
LM4040BIZ
LM4040BIM7
TA = TJ = 25°C
±8.2
±4.1
TA = TJ = TMIN to TMAX
mV
±35
50
TA = TJ = TMIN to TMAX
IR = 10 mA
UNIT
V
LM4040AIM3
LM4040AIZ
TA = TJ = 25°C
Minimum Operating
Current
Average Reverse
Breakdown Voltage
ΔVR/ΔT
Temperature
Coefficient (3)
MIN (1)
TEST CONDITIONS
68
73
μA
±30
TA = TJ = 25°C
IR = 1 mA
±20
TA = TJ = TMIN to TMAX
IR = 100 μA
±100
ppm/°C
±20
IRMIN ≤ IR ≤ 1 mA
1 mA ≤ IR ≤ 15 mA
TA = TJ = 25°C
0.5
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
TA = TJ = TMIN to TMAX
0.9
1.2
3
7
mV
10
Limits are 100% production tested at 25°C. Limits over temperature are ensured through correlation using Statistical Quality Control
(SQC) methods. The limits are used to calculate AOQL.
Typicals are at TJ = 25°C and represent most likely parametric norm.
The (overtemperature) limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage
Tolerance ±[(ΔVR/ΔT)(maxΔT)(VR)]. Where, ΔVR/ΔT is the VR temperature coefficient, maxΔT is the maximum difference in temperature
from the reference point of 25°C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the
different grades in the industrial temperature range where maxΔT = 65°C is shown below:
A-grade: ±0.75% = ±0.1% ±100 ppm/°C × 65°C
B-grade: ±0.85% = ±0.2% ±100 ppm/°C × 65°C
C-grade: ±1.15% = ±0.5% ±100 ppm/°C × 65°C
D-grade: ±1.98% = ±1.0% ±150 ppm/°C × 65°C
E-grade: ±2.98% = ±2.0% ±150 ppm/°C × 65°C
The total overtemperature tolerance for the different grades in the extended temperature range where max ΔT = 100 °C is shown below:
C-grade: ±1.5% = ±0.5% ±100 ppm/°C × 100°C
D-grade: ±2.5% = ±1.0% ±150 ppm/°C × 100°C
E-grade: ±3.5% = ±2.0% ±150 ppm/°C × 100°C
Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of ±2.5V ×
0.75% = ±19 mV.
Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change
must be taken into account separately.
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
Submit Documentation Feedback
21
LM4040-N, LM4040-N-Q1
SNOS633K – OCTOBER 2000 – REVISED JUNE 2016
www.ti.com
Electrical Characteristics: 4.1-V LM4040-N VR Tolerance Grades 'A' And 'B'; Temperature Grade
'I' (continued)
all other limits TA = TJ = 25°C. The grades A and B designate initial Reverse Breakdown Voltage tolerances of ±0.1% and
±0.2%, respectively.
PARAMETER
MIN (1)
TEST CONDITIONS
TYP (2)
MAX (1)
1
UNIT
ZR
Reverse Dynamic
Impedance
IR = 1 mA, f = 120 Hz,
IAC = 0.1 IR
0.5
eN
Wideband Noise
IR = 100 μA
10 Hz ≤ f ≤ 10 kHz
80
μVrms
ΔVR
Reverse Breakdown
Voltage Long Term
Stability
t = 1000 hrs
T = 25°C ±0.1°C
IR = 100 μA
120
ppm
VHYST
Thermal Hysteresis (5)
ΔT = −40°C to 125°C
(5)
Ω
0.08%
Thermal hysteresis is defined as the difference in voltage measured at +25°C after cycling to temperature -40°C and the 25°C
measurement after cycling to temperature 125°C.
6.15 Electrical Characteristics: 4.1-V LM4040-N VR Tolerance Grades 'C' and 'D'; Temperature
Grade 'I'
all other limits TA = TJ = 25°C. The grades C and D designate initial Reverse Breakdown Voltage tolerances of ±0.5% and
±1%, respectively.
PARAMETER
Reverse Breakdown
Voltage
VR
Reverse Breakdown
Voltage Tolerance (3)
IRMIN
MIN (1)
TEST CONDITIONS
IR = 100 μA
IR = 100 μA
Minimum Operating
Current
ΔVR/
ΔT
IR = 1 mA
TA = TJ = 25°C
±20
TA = TJ = TMIN to TMAX
±47
LM4040DIM3
LM4040DIZ
LM4040DIM7
TA = TJ = 25°C
±41
LM4040CIM3
LM4040CIZ
LM4040CIM7
TA = TJ = 25°C
LM4040DIM3
LM4040DIZ
LM4040DIM7
TA = TJ = 25°C
TA = TJ = TMIN to TMAX
(2)
(3)
22
UNIT
V
LM4040CIM3
LM4040CIZ
LM4040CIM7
mV
±81
50
TA = TJ = TMIN to TMAX
68
73
50
TA = TJ = TMIN to TMAX
73
μA
78
±30
LM4040CIM3
LM4040CIZ
LM4040CIM7
TA = TJ = 25°C
LM4040DIM3
LM4040DIZ
LM4040DIM7
TA = TJ = 25°C
±20
TA = TJ = TMIN to TMAX
±100
ppm/°C
±20
TA = TJ = TMIN to TMAX
±150
IR = 100 μA
(1)
MAX (1)
4.096
IR = 10 mA
Average Reverse
Breakdown Voltage
Temperature
Coefficient (3)
TYP (2)
±20
Limits are 100% production tested at 25°C. Limits over temperature are ensured through correlation using Statistical Quality Control
(SQC) methods. The limits are used to calculate AOQL.
Typicals are at TJ = 25°C and represent most likely parametric norm.
The (overtemperature) limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage
Tolerance ±[(ΔVR/ΔT)(maxΔT)(VR)]. Where, ΔVR/ΔT is the VR temperature coefficient, maxΔT is the maximum difference in temperature
from the reference point of 25°C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the
different grades in the industrial temperature range where maxΔT = 65°C is shown below:
A-grade: ±0.75% = ±0.1% ±100 ppm/°C × 65°C
B-grade: ±0.85% = ±0.2% ±100 ppm/°C × 65°C
C-grade: ±1.15% = ±0.5% ±100 ppm/°C × 65°C
D-grade: ±1.98% = ±1.0% ±150 ppm/°C × 65°C
E-grade: ±2.98% = ±2.0% ±150 ppm/°C × 65°C
The total overtemperature tolerance for the different grades in the extended temperature range where max ΔT = 100 °C is shown below:
C-grade: ±1.5% = ±0.5% ±100 ppm/°C × 100°C
D-grade: ±2.5% = ±1.0% ±150 ppm/°C × 100°C
E-grade: ±3.5% = ±2.0% ±150 ppm/°C × 100°C
Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of ±2.5V ×
0.75% = ±19 mV.
Submit Documentation Feedback
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
www.ti.com
SNOS633K – OCTOBER 2000 – REVISED JUNE 2016
Electrical Characteristics: 4.1-V LM4040-N VR Tolerance Grades 'C' and 'D'; Temperature Grade
'I' (continued)
all other limits TA = TJ = 25°C. The grades C and D designate initial Reverse Breakdown Voltage tolerances of ±0.5% and
±1%, respectively.
PARAMETER
TEST CONDITIONS
IRMIN ≤ IR ≤ 1 mA
ΔVR/
ΔIR
Reverse Breakdown
Voltage Change with
Operating Current
Change (4)
1 mA ≤ IR ≤ 15 mA
Reverse Dynamic
Impedance
ZR
eN
ΔVR
Wideband Noise
IR = 100 μA
10 Hz ≤ f ≤ 10 kHz
Reverse Breakdown
Voltage Long Term
Stability
t = 1000 hrs
T = 25°C ±0.1°C
IR = 100 μA
VHYST Thermal Hysteresis (5)
(4)
(5)
IR = 1 mA, f = 120 Hz,
IAC = 0.1 IR
LM4040CIM3
LM4040CIZ
LM4040CIM7
TA = TJ = 25°C
LM4040DIM3
LM4040DIZ
LM4040DIM7
TA = TJ = 25°C
LM4040CIM3
LM4040CIZ
LM4040CIM7
TA = TJ = 25°C
LM4040DIM3
LM4040DIZ
LM4040DIM7
TA = TJ = 25°C
MIN (1)
TYP (2)
MAX (1)
0.5
0.9
TA = TJ = TMIN to TMAX
UNIT
1.2
0.5
TA = TJ = TMIN to TMAX
1.2
1.5
3
TA = TJ = TMIN to TMAX
7
mV
10
3
TA = TJ = TMIN to TMAX
9
13
LM4040CIM3
LM4040CIZ
LM4040CIM7
0.5
LM4040DIM3
LM4040DIZ
LM4040DIM7
0.5
1
Ω
ΔT = −40°C to 125°C
1.3
80
μVrms
120
ppm
0.08%
Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change
must be taken into account separately.
Thermal hysteresis is defined as the difference in voltage measured at +25°C after cycling to temperature -40°C and the 25°C
measurement after cycling to temperature 125°C.
6.16 Electrical Characteristics: 5-V LM4040-N VR Tolerance Grades 'A' And 'B'; Temperature
Grade 'I'
all other limits TA = TJ = 25°C. The grades A and B designate initial Reverse Breakdown Voltage tolerances of ±0.1% and
±0.2%, respectively.
PARAMETER
Reverse Breakdown
Voltage
VR
(1)
(2)
(3)
Reverse Breakdown
Voltage Tolerance (3)
TEST CONDITIONS
IR = 100 μA
MIN (1)
TYP (2)
MAX (1)
5
IR = 100 μA
UNIT
V
LM4040AIM3
LM4040AIZ
TA = TJ = 25°C
TA = TJ = TMIN to TMAX
±38
±5
LM4040BIM3
LM4040BIZ
LM4040BIM7
TA = TJ = 25°C
±10
TA = TJ = TMIN to TMAX
±43
mV
Limits are 100% production tested at 25°C. Limits over temperature are ensured through correlation using Statistical Quality Control
(SQC) methods. The limits are used to calculate AOQL.
Typicals are at TJ = 25°C and represent most likely parametric norm.
The (overtemperature) limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage
Tolerance ±[(ΔVR/ΔT)(maxΔT)(VR)]. Where, ΔVR/ΔT is the VR temperature coefficient, maxΔT is the maximum difference in temperature
from the reference point of 25°C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the
different grades in the industrial temperature range where maxΔT = 65°C is shown below:
A-grade: ±0.75% = ±0.1% ±100 ppm/°C × 65°C
B-grade: ±0.85% = ±0.2% ±100 ppm/°C × 65°C
C-grade: ±1.15% = ±0.5% ±100 ppm/°C × 65°C
D-grade: ±1.98% = ±1.0% ±150 ppm/°C × 65°C
E-grade: ±2.98% = ±2.0% ±150 ppm/°C × 65°C
The total overtemperature tolerance for the different grades in the extended temperature range where max ΔT = 100 °C is shown below:
C-grade: ±1.5% = ±0.5% ±100 ppm/°C × 100°C
D-grade: ±2.5% = ±1.0% ±150 ppm/°C × 100°C
E-grade: ±3.5% = ±2.0% ±150 ppm/°C × 100°C
Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of ±2.5V ×
0.75% = ±19 mV.
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
Submit Documentation Feedback
23
LM4040-N, LM4040-N-Q1
SNOS633K – OCTOBER 2000 – REVISED JUNE 2016
www.ti.com
Electrical Characteristics: 5-V LM4040-N VR Tolerance Grades 'A' And 'B'; Temperature Grade
'I' (continued)
all other limits TA = TJ = 25°C. The grades A and B designate initial Reverse Breakdown Voltage tolerances of ±0.1% and
±0.2%, respectively.
PARAMETER
IRMIN
TA = TJ = 25°C
Minimum Operating
Current
Average Reverse
ΔVR/Δ Breakdown Voltage
T
Temperature
Coefficient (3)
Reverse Breakdown
ΔVR/Δ Voltage Change with
IR
Operating Current
Change (4)
MIN (1)
TEST CONDITIONS
TYP (2)
MAX (1)
54
74
TA = TJ = TMIN to TMAX
80
IR = 10 mA
UNIT
μA
±30
TA = TJ = 25°C
IR = 1 mA
±20
TA = TJ = TMIN to TMAX
±100
IR = 100 μA
ppm/°C
±20
IRMIN ≤ IR ≤ 1 mA
1 mA ≤ IR ≤ 15 mA
TA = TJ = 25°C
0.5
TA = TJ = TMIN to TMAX
1
1.4
TA = TJ = 25°C
3.5
TA = TJ = TMIN to TMAX
8
mV
12
ZR
Reverse Dynamic
Impedance
IR = 1 mA, f = 120 Hz,
IAC = 0.1 IR
0.5
eN
Wideband Noise
IR = 100 μA
10 Hz ≤ f ≤ 10 kHz
80
μVrms
Reverse Breakdown
Voltage Long Term
Stability
t = 1000 hrs
T = 25°C ±0.1°C
IR = 100 μA
120
ppm
ΔVR
VHYST Thermal Hysteresis (5)
(4)
(5)
ΔT = −40°C to 125°C
1.1
Ω
0.08%
Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change
must be taken into account separately.
Thermal hysteresis is defined as the difference in voltage measured at +25°C after cycling to temperature -40°C and the 25°C
measurement after cycling to temperature 125°C.
6.17 Electrical Characteristics: 5-V LM4040-N VR Tolerance Grades 'C' And 'D'; Temperature
Grade 'I'
all other limits TA = TJ = 25°C. The grades C and D designate initial Reverse Breakdown Voltage tolerances of ±0.5% and
±1%, respectively.
PARAMETER
Reverse Breakdown
Voltage
VR
(1)
(2)
(3)
24
Reverse Breakdown
Voltage Tolerance (3)
MIN (1)
TEST CONDITIONS
IR = 100 μA
IR = 100 μA
TYP (2)
MAX (1)
5
UNIT
V
LM4040CIM3
LM4040CIZ
LM4040CIM7
TA = TJ = 25°C
±25
TA = TJ = TMIN to TMAX
±58
LM4040DIM3
LM4040DIZ
LM4040DIM7
TA = TJ = 25°C
±50
TA = TJ = TMIN to TMAX
±99
mV
Limits are 100% production tested at 25°C. Limits over temperature are ensured through correlation using Statistical Quality Control
(SQC) methods. The limits are used to calculate AOQL.
Typicals are at TJ = 25°C and represent most likely parametric norm.
The (overtemperature) limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage
Tolerance ±[(ΔVR/ΔT)(maxΔT)(VR)]. Where, ΔVR/ΔT is the VR temperature coefficient, maxΔT is the maximum difference in temperature
from the reference point of 25°C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the
different grades in the industrial temperature range where maxΔT = 65°C is shown below:
A-grade: ±0.75% = ±0.1% ±100 ppm/°C × 65°C
B-grade: ±0.85% = ±0.2% ±100 ppm/°C × 65°C
C-grade: ±1.15% = ±0.5% ±100 ppm/°C × 65°C
D-grade: ±1.98% = ±1.0% ±150 ppm/°C × 65°C
E-grade: ±2.98% = ±2.0% ±150 ppm/°C × 65°C
The total overtemperature tolerance for the different grades in the extended temperature range where max ΔT = 100 °C is shown below:
C-grade: ±1.5% = ±0.5% ±100 ppm/°C × 100°C
D-grade: ±2.5% = ±1.0% ±150 ppm/°C × 100°C
E-grade: ±3.5% = ±2.0% ±150 ppm/°C × 100°C
Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of ±2.5V ×
0.75% = ±19 mV.
Submit Documentation Feedback
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
www.ti.com
SNOS633K – OCTOBER 2000 – REVISED JUNE 2016
Electrical Characteristics: 5-V LM4040-N VR Tolerance Grades 'C' And 'D'; Temperature Grade
'I' (continued)
all other limits TA = TJ = 25°C. The grades C and D designate initial Reverse Breakdown Voltage tolerances of ±0.5% and
±1%, respectively.
PARAMETER
IRMIN
TEST CONDITIONS
Minimum Operating
Current
LM4040CIM3
LM4040CIZ
LM4040CIM7
TA = TJ = 25°C
LM4040DIM3
LM4040DIZ
LM4040DIM7
TA = TJ = 25°C
LM4040CIM3
LM4040CIZ
LM4040CIM7
TA = TJ = 25°C
LM4040DIM3
LM4040DIZ
LM4040DIM7
TA = TJ = 25°C
LM4040CIM3
LM4040CIZ
LM4040CIM7
TA = TJ = 25°C
LM4040DIM3
LM4040DIZ
LM4040DIM7
TA = TJ = 25°C
LM4040CIM3
LM4040CIZ
LM4040CIM7
TA = TJ = 25°C
LM4040DIM3
LM4040DIZ
LM4040DIM7
TA = TJ = 25°C
IR = 1 mA
1 mA ≤ IR ≤ 15 mA
ZR
Reverse Dynamic
Impedance
IR = 1 mA, f = 120 Hz,
IAC = 0.1 IR
eN
Wideband Noise
IR = 100 μA
10 Hz ≤ f ≤ 10 kHz
Reverse Breakdown
Voltage Long Term
Stability
t = 1000 hrs
T = 25°C ±0.1°C
IR = 100 μA
(5)
74
UNIT
80
54
79
μA
85
±20
TA = TJ = TMIN to TMAX
±100
ppm/°C
±20
TA = TJ = TMIN to TMAX
±150
±20
Reverse Breakdown
ΔVR/Δ Voltage Change with
IR
Operating Current
Change (4)
(4)
54
±30
IRMIN ≤ IR ≤ 1 mA
VHYST Thermal Hysteresis (5)
MAX (1)
TA = TJ = TMIN to TMAX
IR = 100 μA
ΔVR
TYP (2)
TA = TJ = TMIN to TMAX
IR = 10 mA
Average Reverse
ΔVR/Δ Breakdown Voltage
T
Temperature
Coefficient (3)
MIN (1)
0.5
TA = TJ = TMIN to TMAX
0.5
TA = TJ = TMIN to TMAX
3.5
8
mV
12
3.5
10
0.5
1.1
TA = TJ = TMIN to TMAX
15
TA = TJ = TMIN to TMAX
ΔT = −40°C to 125°C
1.3
1.8
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
1
1.4
1.5
Ω
80
μVrms
120
ppm
0.08%
Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change
must be taken into account separately.
Thermal hysteresis is defined as the difference in voltage measured at +25°C after cycling to temperature -40°C and the 25°C
measurement after cycling to temperature 125°C.
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
Submit Documentation Feedback
25
LM4040-N, LM4040-N-Q1
SNOS633K – OCTOBER 2000 – REVISED JUNE 2016
www.ti.com
6.18 Electrical Characteristics: 5-V LM4040-N VR Tolerance Grades 'C' And 'D'; Temperature
Grade 'E'
all other limits TA = TJ = 25°C. The grades C and D designate initial Reverse Breakdown Voltage tolerances of ±0.5% and
±1%, respectively.
PARAMETER
Reverse Breakdown
Voltage
IR = 100 μA
Reverse Breakdown
Voltage Tolerance (2)
IR = 100 μA
LM4040DEM3
LM4040CEM3
IRMIN
Minimum Operating
Current
LM4040DEM3
ΔVR/
ΔT
±25
±75
TA = TJ = 25°C
±50
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
mV
±125
54
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
UNIT
V
TA = TJ = TMIN to TMAX
74
83
54
TA = TJ = TMIN to TMAX
79
μA
88
±30
LM4040CEM3
IR = 1 mA
LM4040DEM3
TA = TJ = 25°C
±20
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
±100
±20
TA = TJ = TMIN to TMAX
IR = 100 μA
ppm/°C
±150
±20
LM4040CEM3
IRMIN ≤ IR ≤ 1 mA
ΔVR/
ΔIR
MAX (1)
TA = TJ = 25°C
IR = 10 mA
Average Reverse
Breakdown Voltage
Temperature
Coefficient (2)
TYP
5
LM4040CEM3
VR
MIN (1)
TEST CONDITIONS
LM4040DEM3
Reverse Breakdown
Voltage Change with
Operating Current
Change (3)
LM4040CEM3
1 mA ≤ IR ≤ 15 mA
LM4040DEM3
TA = TJ = 25°C
0.5
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
0.5
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
1
1.8
3.5
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
1
1.4
8
mV
12
3.5
TA = TJ = TMIN to TMAX
8
15
ZR
Reverse Dynamic
Impedance
IR = 1 mA, f = 120 Hz,
IAC = 0.1 IR
0.5
eN
Wideband Noise
IR = 100 μA
10 Hz ≤ f ≤ 10 kHz
80
μVrms
Reverse Breakdown
Voltage Long Term
Stability
t = 1000 hrs
T = 25°C ±0.1°C
IR = 100 μA
120
ppm
ΔVR
VHYST Thermal Hysteresis (4)
(1)
(2)
(3)
(4)
26
ΔT = −40°C to 125°C
1.1
Ω
0.08%
Limits are 100% production tested at 25°C. Limits over temperature are ensured through correlation using Statistical Quality Control
(SQC) methods. The limits are used to calculate AOQL.
The (overtemperature) limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage
Tolerance ±[(ΔVR/ΔT)(maxΔT)(VR)]. Where, ΔVR/ΔT is the VR temperature coefficient, maxΔT is the maximum difference in temperature
from the reference point of 25°C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the
different grades in the industrial temperature range where maxΔT = 65°C is shown below:
A-grade: ±0.75% = ±0.1% ±100 ppm/°C × 65°C
B-grade: ±0.85% = ±0.2% ±100 ppm/°C × 65°C
C-grade: ±1.15% = ±0.5% ±100 ppm/°C × 65°C
D-grade: ±1.98% = ±1.0% ±150 ppm/°C × 65°C
E-grade: ±2.98% = ±2.0% ±150 ppm/°C × 65°C
The total overtemperature tolerance for the different grades in the extended temperature range where max ΔT = 100 °C is shown below:
C-grade: ±1.5% = ±0.5% ±100 ppm/°C × 100°C
D-grade: ±2.5% = ±1.0% ±150 ppm/°C × 100°C
E-grade: ±3.5% = ±2.0% ±150 ppm/°C × 100°C
Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of ±2.5V ×
0.75% = ±19 mV.
Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change
must be taken into account separately.
Thermal hysteresis is defined as the difference in voltage measured at +25°C after cycling to temperature -40°C and the 25°C
measurement after cycling to temperature 125°C.
Submit Documentation Feedback
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
www.ti.com
SNOS633K – OCTOBER 2000 – REVISED JUNE 2016
6.19 Electrical Characteristics: 8.2-V LM4040-N VR Tolerance Grades 'A' And 'B'; Temperature
Grade 'I'
all other limits TA = TJ = 25°C. The grades A and B designate initial Reverse Breakdown Voltage tolerances of ±0.1% and
±0.2%, respectively.
PARAMETER
Reverse Breakdown
Voltage
VR
IRMIN
Reverse Breakdown
Voltage Tolerance (3)
TEST CONDITIONS
IR = 150 μA
TYP (2)
MAX (1)
UNIT
8.192
V
LM4040AIM3
LM4040AIZ
TA = TJ = 25°C
±8.2
TA = TJ = TMIN to TMAX
±61
LM4040BIM3
LM4040BIZ
TA = TJ = 25°C
±16
IR = 150 μA
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
Minimum Operating
Current
Average Reverse
Breakdown Voltage
ΔVR/ΔT
Temperature
Coefficient (3)
MIN (1)
±70
67
TA = TJ = TMIN to TMAX
IR = 10 mA
mV
91
95
μA
±40
TA = TJ = 25°C
IR = 1 mA
±20
TA = TJ = TMIN to TMAX
IR = 150 μA
±100
ppm/°C
±20
TA = TJ = 25°C
0.6
1.3
Reverse Breakdown
Voltage Change with
Operating Current
Change (4)
IRMIN ≤ IR ≤ 1 mA
ZR
Reverse Dynamic
Impedance
IR = 1 mA, f = 120 Hz,
IAC = 0.1 IR
0.6
eN
Wideband Noise
IR = 150 μA
10 Hz ≤ f ≤ 10 kHz
130
μVrms
ΔVR
Reverse Breakdown
Voltage Long Term
Stability
t = 1000 hrs
T = 25°C ±0.1°C
IR = 150 μA
120
ppm
VHYST
Thermal Hysteresis (5)
ΔT = −40°C to 125°C
ΔVR/ΔI
R
(1)
(2)
(3)
(4)
(5)
1 mA ≤ IR ≤ 15 mA
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
2.5
7
TA = TJ = TMIN to TMAX
10
mV
18
Ω
1.5
0.08%
Limits are 100% production tested at 25°C. Limits over temperature are ensured through correlation using Statistical Quality Control
(SQC) methods. The limits are used to calculate AOQL.
Typicals are at TJ = 25°C and represent most likely parametric norm.
The (overtemperature) limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage
Tolerance ±[(ΔVR/ΔT)(maxΔT)(VR)]. Where, ΔVR/ΔT is the VR temperature coefficient, maxΔT is the maximum difference in temperature
from the reference point of 25°C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the
different grades in the industrial temperature range where maxΔT = 65°C is shown below:
A-grade: ±0.75% = ±0.1% ±100 ppm/°C × 65°C
B-grade: ±0.85% = ±0.2% ±100 ppm/°C × 65°C
C-grade: ±1.15% = ±0.5% ±100 ppm/°C × 65°C
D-grade: ±1.98% = ±1.0% ±150 ppm/°C × 65°C
E-grade: ±2.98% = ±2.0% ±150 ppm/°C × 65°C
The total overtemperature tolerance for the different grades in the extended temperature range where max ΔT = 100 °C is shown below:
C-grade: ±1.5% = ±0.5% ±100 ppm/°C × 100°C
D-grade: ±2.5% = ±1.0% ±150 ppm/°C × 100°C
E-grade: ±3.5% = ±2.0% ±150 ppm/°C × 100°C
Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of ±2.5V ×
0.75% = ±19 mV.
Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change
must be taken into account separately.
Thermal hysteresis is defined as the difference in voltage measured at +25°C after cycling to temperature -40°C and the 25°C
measurement after cycling to temperature 125°C.
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
Submit Documentation Feedback
27
LM4040-N, LM4040-N-Q1
SNOS633K – OCTOBER 2000 – REVISED JUNE 2016
www.ti.com
6.20 Electrical Characteristics: 8.2-V Lm4040-N VR Tolerance Grades 'C' And 'D'; Temperature
Grade 'I'
all other limits TA = TJ = 25°C. The grades C and D designate initial Reverse Breakdown Voltage tolerances of ±0.5% and
±1%, respectively.
PARAMETER
Reverse Breakdown
Voltage
VR
IRMIN
Reverse Breakdown
Voltage Tolerance (3)
MIN (1)
TEST CONDITIONS
IR = 150 μA
TA = TJ = 25°C
±41
TA = TJ = TMIN to TMAX
±94
LM4040DIM3
LM4040DIZ
TA = TJ = 25°C
±82
LM4040CIM3
LM4040CIZ
TA = TJ = 25°C
LM4040DIM3
LM4040DIZ
TA = TJ = 25°C
IR = 150 μA
TA = TJ = TMIN to TMAX
mV
±162
67
TA = TJ = TMIN to TMAX
91
95
67
TA = TJ = TMIN to TMAX
96
μA
100
±40
LM4040CIM3
LM4040CIZ
TA = TJ = 25°C
LM4040DIM3
LM4040DIZ
TA = TJ = 25°C
IR = 1 mA
±20
TA = TJ = TMIN to TMAX
±100
±20
TA = TJ = TMIN to TMAX
IR = 150 μA
ppm/°C
±150
±20
LM4040CIM3
LM4040CIZ
TA = TJ = 25°C
LM4040DIM3
LM4040DIZ
TA = TJ = 25°C
LM4040CIM3
LM4040CIZ
TA = TJ = 25°C
LM4040DIM3
LM4040DIZ
TA = TJ = 25°C
IRMIN ≤ IR ≤ 1 mA
R
UNIT
V
LM4040CIM3
LM4040CIZ
IR = 10 mA
ΔVR/ΔI
MAX (1)
8.192
Minimum Operating
Current
Average Reverse
Breakdown Voltage
ΔVR/ΔT
Temperature
Coefficient (3)
TYP (2)
Reverse Breakdown
Voltage Change with
Operating Current
Change (4)
1 mA ≤ IR ≤ 15 mA
0.6
TA = TJ = TMIN to TMAX
1.3
2.5
0.6
1.7
7
10
TA = TJ = TMIN to TMAX
3
TA = TJ = TMIN to TMAX
mV
18
7
TA = TJ = TMIN to TMAX
15
24
LM4040CIM3
LM4040CIZ
0.6
1.5
LM4040DIM3
LM4040DIZ
0.6
1.9
Reverse Dynamic
Impedance
IR = 1 mA, f = 120 Hz,
IAC = 0.1 IR
Wideband Noise
IR = 150 μA
10 Hz ≤ f ≤ 10 kHz
130
μVrms
ΔVR
Reverse Breakdown
Voltage Long Term
Stability
t = 1000 hrs
T = 25°C ±0.1°C
IR = 150 μA
120
ppm
VHYST
Thermal Hysteresis (5)
ΔT = −40°C to 125°C
ZR
eN
(1)
(2)
(3)
(4)
(5)
28
Ω
0.08%
Limits are 100% production tested at 25°C. Limits over temperature are ensured through correlation using Statistical Quality Control
(SQC) methods. The limits are used to calculate AOQL.
Typicals are at TJ = 25°C and represent most likely parametric norm.
The (overtemperature) limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage
Tolerance ±[(ΔVR/ΔT)(maxΔT)(VR)]. Where, ΔVR/ΔT is the VR temperature coefficient, maxΔT is the maximum difference in temperature
from the reference point of 25°C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the
different grades in the industrial temperature range where maxΔT = 65°C is shown below:
A-grade: ±0.75% = ±0.1% ±100 ppm/°C × 65°C
B-grade: ±0.85% = ±0.2% ±100 ppm/°C × 65°C
C-grade: ±1.15% = ±0.5% ±100 ppm/°C × 65°C
D-grade: ±1.98% = ±1.0% ±150 ppm/°C × 65°C
E-grade: ±2.98% = ±2.0% ±150 ppm/°C × 65°C
The total overtemperature tolerance for the different grades in the extended temperature range where max ΔT = 100 °C is shown below:
C-grade: ±1.5% = ±0.5% ±100 ppm/°C × 100°C
D-grade: ±2.5% = ±1.0% ±150 ppm/°C × 100°C
E-grade: ±3.5% = ±2.0% ±150 ppm/°C × 100°C
Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of ±2.5V ×
0.75% = ±19 mV.
Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change
must be taken into account separately.
Thermal hysteresis is defined as the difference in voltage measured at +25°C after cycling to temperature -40°C and the 25°C
measurement after cycling to temperature 125°C.
Submit Documentation Feedback
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
www.ti.com
SNOS633K – OCTOBER 2000 – REVISED JUNE 2016
6.21 Electrical Characteristics: 10-V LM4040-N VR Tolerance Grades 'A' And 'B'; Temperature
Grade 'I'
all other limits TA = TJ = 25°C. The grades A and B designate initial Reverse Breakdown Voltage tolerances of ±0.1% and
±0.2%, respectively.
PARAMETER
Reverse Breakdown
Voltage
VR
IRMIN
Reverse Breakdown
Voltage Tolerance (3)
TEST CONDITIONS
IR = 150 μA
TYP (2)
MAX (1)
UNIT
10
V
LM4040AIM3
LM4040AIZ
TA = TJ = 25°C
±10
TA = TJ = TMIN to TMAX
±75
LM4040BIM3
LM4040BIZ
TA = TJ = 25°C
±20
IR = 150 μA
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
Minimum Operating
Current
Average Reverse
Breakdown Voltage
ΔVR/ΔT
Temperature
Coefficient (3)
MIN (1)
±85
75
TA = TJ = TMIN to TMAX
IR = 10 mA
mV
100
μA
103
±40
TA = TJ = 25°C
IR = 1 mA
±20
TA = TJ = TMIN to TMAX
IR = 150 μA
±100
ppm/°C
±20
TA = TJ = 25°C
0.8
1.5
Reverse Breakdown
Voltage Change with
Operating Current
Change (4)
IRMIN ≤ IR ≤ 1 mA
ZR
Reverse Dynamic
Impedance
IR = 1 mA, f = 120 Hz,
IAC = 0.1 IR
0.7
eN
Wideband Noise
IR = 150 μA
10 Hz ≤ f ≤ 10 kHz
180
μVrms
ΔVR
Reverse Breakdown
Voltage Long Term
Stability
t = 1000 hrs
T = 25°C ±0.1°C
IR = 150 μA
120
ppm
VHYST
Thermal Hysteresis (5)
ΔT = −40°C to 125°C
ΔVR/ΔI
R
(1)
(2)
(3)
(4)
(5)
1 mA ≤ IR ≤ 15 mA
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
3.5
8
TA = TJ = TMIN to TMAX
12
mV
23
Ω
1.7
0.08%
Limits are 100% production tested at 25°C. Limits over temperature are ensured through correlation using Statistical Quality Control
(SQC) methods. The limits are used to calculate AOQL.
Typicals are at TJ = 25°C and represent most likely parametric norm.
The (overtemperature) limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage
Tolerance ±[(ΔVR/ΔT)(maxΔT)(VR)]. Where, ΔVR/ΔT is the VR temperature coefficient, maxΔT is the maximum difference in temperature
from the reference point of 25°C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the
different grades in the industrial temperature range where maxΔT = 65°C is shown below:
A-grade: ±0.75% = ±0.1% ±100 ppm/°C × 65°C
B-grade: ±0.85% = ±0.2% ±100 ppm/°C × 65°C
C-grade: ±1.15% = ±0.5% ±100 ppm/°C × 65°C
D-grade: ±1.98% = ±1.0% ±150 ppm/°C × 65°C
E-grade: ±2.98% = ±2.0% ±150 ppm/°C × 65°C
The total overtemperature tolerance for the different grades in the extended temperature range where max ΔT = 100 °C is shown below:
C-grade: ±1.5% = ±0.5% ±100 ppm/°C × 100°C
D-grade: ±2.5% = ±1.0% ±150 ppm/°C × 100°C
E-grade: ±3.5% = ±2.0% ±150 ppm/°C × 100°C
Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of ±2.5V ×
0.75% = ±19 mV.
Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change
must be taken into account separately.
Thermal hysteresis is defined as the difference in voltage measured at +25°C after cycling to temperature -40°C and the 25°C
measurement after cycling to temperature 125°C.
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
Submit Documentation Feedback
29
LM4040-N, LM4040-N-Q1
SNOS633K – OCTOBER 2000 – REVISED JUNE 2016
www.ti.com
6.22 Electrical Characteristics: 10-V LM4040-N VR Tolerance Grades 'C' And 'D'; Temperature
Grade 'I'
all other limits TA = TJ = 25°C. The grades C and D designate initial Reverse Breakdown Voltage tolerances of ±0.5% and
±1%, respectively.
PARAMETER
Reverse Breakdown
Voltage
VR
IRMIN
Reverse Breakdown
Voltage Tolerance (3)
MIN (1)
TEST CONDITIONS
IR = 150 μA
TA = TJ = 25°C
TA = TJ = TMIN to TMAX
±115
LM4040DIM3
LM4040DIZ
TA = TJ = 25°C
±100
LM4040CIM3
LM4040CIZ
TA = TJ = 25°C
LM4040DIM3
LM4040DIZ
TA = TJ = 25°C
IR = 150 μA
±50
TA = TJ = TMIN to TMAX
mV
±198
75
TA = TJ = TMIN to TMAX
100
103
75
TA = TJ = TMIN to TMAX
110
μA
113
±40
LM4040CIM3
LM4040CIZ
TA = TJ = 25°C
LM4040DIM3
LM4040DIZ
TA = TJ = 25°C
IR = 1 mA
±20
TA = TJ = TMIN to TMAX
±100
±20
TA = TJ = TMIN to TMAX
IR = 150 μA
ppm/°C
±150
±20
LM4040CIM3
LM4040CIZ
TA = TJ = 25°C
LM4040DIM3
LM4040DIZ
TA = TJ = 25°C
LM4040CIM3
LM4040CIZ
TA = TJ = 25°C
LM4040DIM3
LM4040DIZ
TA = TJ = 25°C
IRMIN ≤ IR ≤ 1 mA
R
UNIT
V
LM4040CIM3
LM4040CIZ
IR = 10 mA
ΔVR/ΔI
MAX (1)
10
Minimum Operating
Current
Average Reverse
Breakdown Voltage
ΔVR/ΔT
Temperature
Coefficient (3)
TYP (2)
Reverse Breakdown
Voltage Change with
Operating Current
Change (4)
1 mA ≤ IR ≤ 15 mA
0.8
TA = TJ = TMIN to TMAX
3.5
0.8
2
8
12
TA = TJ = TMIN to TMAX
4
TA = TJ = TMIN to TMAX
mV
23
8
TA = TJ = TMIN to TMAX
LM4040CIM3
LM4040CIZ
1.5
18
29
0.7
1.7
Reverse Dynamic
Impedance
IR = 1 mA, f = 120 Hz,
IAC = 0.1 IR
Wideband Noise
IR = 150 μA
10 Hz ≤ f ≤ 10 kHz
180
μVrms
ΔVR
Reverse Breakdown
Voltage Long Term
Stability
t = 1000 hrs
T = 25°C ±0.1°C
IR = 150 μA
120
ppm
VHYST
Thermal Hysteresis (5)
ΔT = −40°C to 125°C
ZR
eN
(1)
(2)
(3)
(4)
(5)
30
Ω
LM4040DIM3
LM4040DIZ
2.3
0.08%
Limits are 100% production tested at 25°C. Limits over temperature are ensured through correlation using Statistical Quality Control
(SQC) methods. The limits are used to calculate AOQL.
Typicals are at TJ = 25°C and represent most likely parametric norm.
The (overtemperature) limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage
Tolerance ±[(ΔVR/ΔT)(maxΔT)(VR)]. Where, ΔVR/ΔT is the VR temperature coefficient, maxΔT is the maximum difference in temperature
from the reference point of 25°C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the
different grades in the industrial temperature range where maxΔT = 65°C is shown below:
A-grade: ±0.75% = ±0.1% ±100 ppm/°C × 65°C
B-grade: ±0.85% = ±0.2% ±100 ppm/°C × 65°C
C-grade: ±1.15% = ±0.5% ±100 ppm/°C × 65°C
D-grade: ±1.98% = ±1.0% ±150 ppm/°C × 65°C
E-grade: ±2.98% = ±2.0% ±150 ppm/°C × 65°C
The total overtemperature tolerance for the different grades in the extended temperature range where max ΔT = 100 °C is shown below:
C-grade: ±1.5% = ±0.5% ±100 ppm/°C × 100°C
D-grade: ±2.5% = ±1.0% ±150 ppm/°C × 100°C
E-grade: ±3.5% = ±2.0% ±150 ppm/°C × 100°C
Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of ±2.5V ×
0.75% = ±19 mV.
Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change
must be taken into account separately.
Thermal hysteresis is defined as the difference in voltage measured at +25°C after cycling to temperature -40°C and the 25°C
measurement after cycling to temperature 125°C.
Submit Documentation Feedback
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
www.ti.com
SNOS633K – OCTOBER 2000 – REVISED JUNE 2016
6.23 Typical Characteristics
Figure 1. Temperature Drift For Different Average
Temperature Coefficient
Figure 2. Output Impedance vs Frequency
Figure 3. Output Impedance vs Frequency
Figure 4. Reverse Characteristics And Minimum Operating
Current
Figure 5. Noise Voltage vs Frequency
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
Submit Documentation Feedback
31
LM4040-N, LM4040-N-Q1
SNOS633K – OCTOBER 2000 – REVISED JUNE 2016
www.ti.com
6.23.1 Start-Up Characteristics
RS = 30k
RS = 30k
Figure 6. Input Voltage Step Response LM4040-N-2.5
Figure 7. Input Voltage Step Response LM4040-N-5
RS = 30k
Figure 8. Input Voltage Step Response LM4040-N-10
7 Parameter Measurement Information
Figure 9. Test Circuit
32
Submit Documentation Feedback
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
www.ti.com
SNOS633K – OCTOBER 2000 – REVISED JUNE 2016
8 Detailed Description
8.1 Overview
The LM4040 device is a precision micropower shunt voltage reference available in 7 different fixed-output
voltage options and three different packages to meet small footprint requirements. The part is also available in
five different tolerance grades.
8.2 Functional Block Diagram
8.3 Feature Description
The LM4040 device is effectively a precision Zener diode. The part requires a small quiescent current for
regulation, and regulates the output voltage by shunting more or less current to ground, depending on input
voltage and load. The only external component requirement is a resistor between the cathode and the input
voltage to set the input current. An external capacitor can be used on the input or output, but is not required.
8.4 Device Functional Modes
The LM4040 device is a fixed output voltage part, where the feedback is internal. Therefore, the part can only
operate is a closed loop mode and the output voltage cannot be adjusted. The output voltage will remain in
regulation as long as IR is between IRMIN, see Electrical Characteristics: 2-V LM4040-N VR Tolerance Grades 'A'
And 'B'; Temperature Grade 'I', and IRMAX, 15 mA. Proper selection of the external resistor for input voltage range
and load current range will ensure these conditions are met.
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
Submit Documentation Feedback
33
LM4040-N, LM4040-N-Q1
SNOS633K – OCTOBER 2000 – REVISED JUNE 2016
www.ti.com
9 Application and Implementation
NOTE
Information in the following applications sections is not part of the TI component
specification, and TI does not warrant its accuracy or completeness. TI’s customers are
responsible for determining suitability of components for their purposes. Customers should
validate and test their design implementation to confirm system functionality.
9.1 Application Information
The LM4040-N is a precision micropower curvature-corrected bandgap shunt voltage reference. For space
critical applications, the LM4040-N is available in the sub-miniature SOT-23 and SC70 surface-mount package.
The LM4040-N has been designed for stable operation without the need of an external capacitor connected
between the + pin and the − pin. If, however, a bypass capacitor is used, the LM4040-N remains stable.
Reducing design effort is the availability of several fixed reverse breakdown voltages: 2.048 V, 2.5 V, 3 V, 4.096
V, 5 V, 8.192 V, and 10 V. The minimum operating current increases from 60 µA for the LM4040-N-2.048 and
LM4040-N-2.5 to 100 μA for the 10-V LM4040-N. All versions have a maximum operating current of 15 mA.
LM4040-Ns in the SOT-23 packages have a parasitic Schottky diode between pin 2 (−) and pin 3 (Die attach
interface contact). Therefore, pin 3 of the SOT-23 package must be left floating or connected to pin 2.
LM4040-Ns in the SC70 have a parasitic Schottky diode between pin 1 (−) and pin 2 (Die attach interface
contact). Therefore, pin 2 must be left floating or connected to pin1.
The 4.096-V version allows single 5-V 12-bit ADCs or DACs to operate with an LSB equal to 1 mV. For 12-bit
ADCs or DACs that operate on supplies of 10 V or greater, the 8.192-V version gives 2 mV per LSB.
The typical thermal hysteresis specification is defined as the change in 25°C voltage measured after thermal
cycling. The device is thermal cycled to temperature –40°C and then measured at 25°C. Next the device is
thermal cycled to temperature 125°C and again measured at 25°C. The resulting VOUT delta shift between the
25°C measurements is thermal hysteresis. Thermal hysteresis is common in precision references and is induced
by thermal-mechanical package stress. Changes in environmental storage temperature, operating temperature
and board mounting temperature are all factors that can contribute to thermal hysteresis.
In a conventional shunt regulator application (Figure 10) , an external series resistor (RS) is connected between
the supply voltage and the LM4040-N. RS determines the current that flows through the load (IL) and the
LM4040-N (IQ). Since load current and supply voltage may vary, RS should be small enough to supply at least
the minimum acceptable IQ to the LM4040-N even when the supply voltage is at its minimum and the load
current is at its maximum value. When the supply voltage is at its maximum and IL is at its minimum, RS should
be large enough so that the current flowing through the LM4040-N is less than 15 mA.
RS is determined by the supply voltage, (VS), the load and operating current, (IL and IQ), and the LM4040-N's
reverse breakdown voltage, VR.
(1)
9.2 Typical Applications
9.2.1 Shunt Regulator
Figure 10. Shunt Regulator Schematic
34
Submit Documentation Feedback
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
www.ti.com
SNOS633K – OCTOBER 2000 – REVISED JUNE 2016
Typical Applications (continued)
9.2.1.1 Design Requirements
VIN > VOUT
Select RS such that:
IRMIN < IR < IRMAX where IRMAX = 15 mA
See Electrical Characteristics: 2-V LM4040-N VR Tolerance Grades 'A' And 'B'; Temperature Grade 'I'
for minimum operating current for each voltage option and grade.
9.2.1.2 Detailed Design Procedure
The resistor RS must be selected such that current IR will remain in the operational region of the part for the
entire VIN range and load current range. The two extremes to consider are VIN at its minimum, and the load at its
maximum, where RS must be small enough for IR to remain above IRMIN. The other extreme is VIN at its
maximum, and the load at its minimum, where RS must be large enough to maintain IR < IRMAX. For most
designs, 0.1 mA ≤ IR ≤ 1 mA is a good starting point.
Use Equation 2 and Equation 3 to set RS between RS_MIN and RS_MAX.
VIN _ MAX - VOUT
RS _ MIN =
ILOAD _ MIN + IR _ MAX
RS _ MAX =
(2)
VIN _ MIN - VOUT
ILOAD _ MAX + IR _ MIN
(3)
9.2.1.3 Application Curve
Figure 11. Reverse Characteristics And Minimum Operating Current
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
Submit Documentation Feedback
35
LM4040-N, LM4040-N-Q1
SNOS633K – OCTOBER 2000 – REVISED JUNE 2016
www.ti.com
Typical Applications (continued)
9.2.2 4.1-V ADC Application
**Ceramic monolithic
*Tantalum
Figure 12. 4.1-V LM4040-N'S Nominal 4.096 Breakdown Voltage Gives ADC12451 1 MV/LSB
9.2.2.1 Design Requirements
The only design requirement is for an output voltage of 4.096 V.
9.2.2.2 Detailed Design Procedure
Using an LM4040-4.1, select an appropriate RS to sufficiently power the device. Set the target IR for 1 mA. With
an input voltage of 5 V, the resistor can be calculated:
5 V - 4.096 V
R=
= 904 W
1mA
(4)
The closest available resistance of 909 Ω is used here, which in turn yields an IR of 994 μA.
36
Submit Documentation Feedback
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
www.ti.com
SNOS633K – OCTOBER 2000 – REVISED JUNE 2016
Typical Applications (continued)
9.2.3 Bounded Amplifier
Nominal clamping voltage is ±11.5 V (LM4040-N's reverse breakdown voltage +2 diode VF).
Figure 13. Bounded Amplifier Reduces Saturation-Induced Delays and
Can Prevent Succeeding Stage Damage
9.2.3.1 Design Requirements
Design an amplifier with output clamped at ±11.5 V.
9.2.3.2 Detailed Design Procedure
With amplifier rails of ±15 V, the output can be bound to ±11.5 V with the LM4040-10 and two nominal diode
voltage drops of 0.7 V.
VOUTBound = 2 × VFWD + VZ
VOUTBound = 1.4 V + 10 V
(5)
(6)
Select RS = 15 kΩ to keep IR low. Calculate IR to confirm RS selection.
IR = (VIN – VOUT) / R, however in this case, the negative supply must be taken into account.
IR = (VIN+ – VIN- – VOUT)/R = (30 V – 10 V) / (RS1+RS2) = 20 V / 30 kΩ = 0.667 mA
(7)
(8)
This is an acceptable value for IR that will not draw excessive current, but prevents the part from being starved
for current.
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
Submit Documentation Feedback
37
LM4040-N, LM4040-N-Q1
SNOS633K – OCTOBER 2000 – REVISED JUNE 2016
www.ti.com
Typical Applications (continued)
9.2.4 Protecting Op-Amp Input
The bounding voltage is ±4 V with the 2.5-V LM4040-N (LM4040-N's reverse breakdown voltage + 3 diode VF).
Figure 14. Protecting Op Amp Input
9.2.4.1 Design Requirements
Limit the input voltage to the op-amp to ±4 V.
9.2.4.2 Detailed Design Procedure
Similar to Bounded Amplifier, this design uses a LM4040-2.5 and three forward diode voltage drops to create a
voltage clamp. The procedure for selecting the RS resistors, in this case 5 kΩ, is the same as Detailed Design
Procedure.
IR = (VIN+ – VIN- – VOUT) / R = (10 V – 2.5 V) / (RS1 + RS2) = 7.5 V / 10 kΩ = 0.750 mA
38
Submit Documentation Feedback
(9)
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
www.ti.com
SNOS633K – OCTOBER 2000 – REVISED JUNE 2016
Typical Applications (continued)
9.2.5 Precision ±4.096-V Reference
Figure 15. Precision ±4.096-V Reference
9.2.5.1 Design Requirements
Use a single voltage reference to create positive and negative reference rails, ±4.096 V.
9.2.5.2 Detailed Design Procedure
The procedure for selecting the RS resistor is same as detailed in Detailed Design Procedure. The output of the
voltage reference is used as the inverting input to the op-amp, with unity gain.
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
Submit Documentation Feedback
39
LM4040-N, LM4040-N-Q1
SNOS633K – OCTOBER 2000 – REVISED JUNE 2016
www.ti.com
Typical Applications (continued)
9.2.6 Precision Current Sink/Source
Figure 16. Precision 1-mA Current Sink
Figure 17. Precision 1-mA Current Source
9.2.6.1 Design Requirements
Create precision 1-mA current sink and/or 1-mA current source.
9.2.6.2 Detailed Design Procedure
Set R1 such that the current through the shunt reference, IR, is greater than IRMIN.
IOUT = VOUT / R2 where VOUT is the voltage drop across the shunt reference. In this case,
IOUT = 2.5 / R2
40
Submit Documentation Feedback
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
www.ti.com
SNOS633K – OCTOBER 2000 – REVISED JUNE 2016
10 Power Supply Recommendations
While a bypass capacitor is not required on the input voltage line, TI recommends reducing noise on the input
which could affect the output. A 0.1-µF ceramic capacitor or larger is recommended.
11 Layout
11.1 Layout Guidelines
Place external components as close to the device as possible. Place RS close the cathode, as well as the input
bypass capacitor, if used.
11.2 Layout Example
RS physically close to device cathode
RS
CIN
COUT
CIN physically
close to device
COUT physically
close to device
Figure 18. Layout Diagram
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
Submit Documentation Feedback
41
LM4040-N, LM4040-N-Q1
SNOS633K – OCTOBER 2000 – REVISED JUNE 2016
www.ti.com
12 Device and Documentation Support
12.1 Documentation Support
12.1.1 Related Documentation
For related documentation, see the following:
LM4041-N/LM4041-N-Q1 Precision Micropower Shunt Voltage Reference, SNOS641
12.2 Related Links
The table below lists quick access links. Categories include technical documents, support and community
resources, tools and software, and quick access to sample or buy.
Table 1. Related Links
PARTS
PRODUCT FOLDER
SAMPLE & BUY
TECHNICAL
DOCUMENTS
TOOLS &
SOFTWARE
SUPPORT &
COMMUNITY
LM4040-N
Click here
Click here
Click here
Click here
Click here
LM4040-N-Q1
Click here
Click here
Click here
Click here
Click here
LM4040-N-Q1
Click here
Click here
Click here
Click here
Click here
12.3 Community Resources
The following links connect to TI community resources. Linked contents are provided "AS IS" by the respective
contributors. They do not constitute TI specifications and do not necessarily reflect TI's views; see TI's Terms of
Use.
TI E2E™ Online Community TI's Engineer-to-Engineer (E2E) Community. Created to foster collaboration
among engineers. At e2e.ti.com, you can ask questions, share knowledge, explore ideas and help
solve problems with fellow engineers.
Design Support TI's Design Support Quickly find helpful E2E forums along with design support tools and
contact information for technical support.
12.4 Trademarks
E2E is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners.
12.5 Electrostatic Discharge Caution
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
12.6 Glossary
SLYZ022 — TI Glossary.
This glossary lists and explains terms, acronyms, and definitions.
13 Mechanical, Packaging, And Orderable Information
The following pages include mechanical, packaging, and orderable information. This information is the most
current data available for the designated devices. This data is subject to change without notice and revision of
this document. For browser-based versions of this data sheet, refer to the left-hand navigation.
13.1 SOT-23 and SC70 Package Marking Information
Only three fields of marking are possible on the SOT-23's and SC70's small surface. This table gives the
meaning of the three fields.
First Field:
42
Submit Documentation Feedback
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
www.ti.com
SNOS633K – OCTOBER 2000 – REVISED JUNE 2016
SOT-23 and SC70 Package Marking Information (continued)
R = Reference
Second Field: Voltage Option
J = 2.048-V Voltage Option
2 = 2.5-V Voltage Option
K = 3-V Voltage Option
4 = 4.096-V Voltage Option
5 = 5-V Voltage Option
8 = 8.192-V Voltage Option
0 = 10-V Voltage Option
Third Field: Initial Reverse Breakdown Voltage or Reference Voltage Tolerance
A = ±0.1%
B = ±0.2%
C = +0.5%
D = ±1.0%
E = ±2.0%
PART MARKING
FIELD DEFINITION
RJA (SOT-23 only)
Reference, 2.048 V, ±0.1%
R2A (SOT-23 only)
Reference, 2.5 V, ±0.1%
RKA (SOT-23 only)
Reference, 3 V, ±0.1%
R4A (SOT-23 only)
Reference, 4.096 V, ±0.1%
R5A (SOT-23 only)
Reference, 5 V, ±0.1%
R8A (SOT-23 only)
Reference, 8.192 V, ±0.1%
R0A (SOT-23 only)
Reference, 10 V, ±0.1%
RJB
Reference, 2.048 V, ±0.2%
R2B
Reference, 2.5 V, ±0.2%
RKB
Reference, 3 V, ±0.2%
R4B
Reference, 4.096 V, ±0.2%
R5B
Reference, 5 V, ±0.2%
R8B (SOT-23 only)
Reference, 8.192 V, ±0.2%
R0B (SOT-23 only)
Reference, 10 V, ±0.2%
RJC
Reference, 2.048 V, ±0.5%
R2C
Reference, 2.5 V, ±0.5%
RKC
Reference, 3 V, ±0.5%
R4C
Reference, 4.096 V, ±0.5%
R5C
Reference, 5 V, ±0.5%
R8C (SOT-23 only)
Reference, 8.192 V, ±0.5%
R0C (SOT-23 only)
Reference, 10 V, ±0.5%
RJD
Reference, 2.048 V, ±1.0%
R2D
Reference, 2.5 V, ±1.0%
RKD
Reference, 3 V, ±1.0%
R4D
Reference, 4.096 V, ±1.0%
R5D
Reference, 5 V, ±1.0%
R8D (SOT-23 only)
Reference, 8.192 V, ±1.0%
R0D (SOT-23 only)
Reference, 10 V, ±1.0%
RJE
Reference, 2.048 V, ±2.0%
R2E
Reference, 2.5 V, ±2.0%
RKE
Reference, 3 V, ±2.0%
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
Submit Documentation Feedback
43
PACKAGE OPTION ADDENDUM
www.ti.com
2-Jun-2016
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
LM4040AIM3-10.0
NRND
SOT-23
DBZ
3
1000
TBD
Call TI
Call TI
R0A
LM4040AIM3-10.0/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R0A
LM4040AIM3-2.0
NRND
SOT-23
DBZ
3
1000
TBD
Call TI
Call TI
RJA
LM4040AIM3-2.0/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
RJA
LM4040AIM3-2.5
ACTIVE
SOT-23
DBZ
3
1000
TBD
Call TI
Call TI
R2A
LM4040AIM3-2.5/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R2A
LM4040AIM3-3.0
NRND
SOT-23
DBZ
3
1000
TBD
Call TI
Call TI
RKA
LM4040AIM3-3.0/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
RKA
LM4040AIM3-4.1
NRND
SOT-23
DBZ
3
1000
TBD
Call TI
Call TI
R4A
LM4040AIM3-4.1/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R4A
LM4040AIM3-5.0
NRND
SOT-23
DBZ
3
1000
TBD
Call TI
Call TI
R5A
LM4040AIM3-5.0/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R5A
LM4040AIM3X-10
NRND
SOT-23
DBZ
3
3000
TBD
Call TI
Call TI
R0A
LM4040AIM3X-10/NOPB
ACTIVE
SOT-23
DBZ
3
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R0A
LM4040AIM3X-2.0/NOPB
ACTIVE
SOT-23
DBZ
3
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
RJA
LM4040AIM3X-2.5
NRND
SOT-23
DBZ
3
3000
TBD
Call TI
Call TI
R2A
LM4040AIM3X-2.5/NOPB
ACTIVE
SOT-23
DBZ
3
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R2A
LM4040AIM3X-3.0/NOPB
ACTIVE
SOT-23
DBZ
3
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
RKA
LM4040AIM3X-4.1/NOPB
ACTIVE
SOT-23
DBZ
3
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R4A
LM4040AIM3X-5.0
NRND
SOT-23
DBZ
3
3000
TBD
Call TI
Call TI
R5A
Addendum-Page 1
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
Orderable Device
2-Jun-2016
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
LM4040AIM3X-5.0/NOPB
ACTIVE
SOT-23
DBZ
3
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R5A
LM4040AIZ-10.0/NOPB
ACTIVE
TO-92
LP
3
1800
Green (RoHS
& no Sb/Br)
CU SN
N / A for Pkg Type
4040A
IZ10
LM4040AIZ-2.5/NOPB
ACTIVE
TO-92
LP
3
1800
Green (RoHS
& no Sb/Br)
CU SN
N / A for Pkg Type
4040A
IZ2.5
LM4040AIZ-4.1/NOPB
ACTIVE
TO-92
LP
3
1800
Green (RoHS
& no Sb/Br)
CU SN
N / A for Pkg Type
4040A
IZ4.1
LM4040AIZ-5.0/NOPB
ACTIVE
TO-92
LP
3
1800
Green (RoHS
& no Sb/Br)
CU SN
N / A for Pkg Type
4040A
IZ5.0
LM4040BIM3-10.0
NRND
SOT-23
DBZ
3
1000
TBD
Call TI
Call TI
R0B
LM4040BIM3-10.0/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R0B
LM4040BIM3-2.0/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
RJB
LM4040BIM3-2.5
ACTIVE
SOT-23
DBZ
3
1000
TBD
Call TI
Call TI
R2B
LM4040BIM3-2.5/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R2B
LM4040BIM3-3.0
NRND
SOT-23
DBZ
3
1000
TBD
Call TI
Call TI
RKB
LM4040BIM3-3.0/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
RKB
LM4040BIM3-4.1
NRND
SOT-23
DBZ
3
1000
TBD
Call TI
Call TI
R4B
LM4040BIM3-4.1/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R4B
LM4040BIM3-5.0
NRND
SOT-23
DBZ
3
1000
TBD
Call TI
Call TI
R5B
LM4040BIM3-5.0/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R5B
LM4040BIM3-8.2
NRND
SOT-23
DBZ
3
1000
TBD
Call TI
Call TI
R8B
LM4040BIM3-8.2/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R8B
LM4040BIM3X-10/NOPB
ACTIVE
SOT-23
DBZ
3
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R0B
LM4040BIM3X-2.0/NOPB
ACTIVE
SOT-23
DBZ
3
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
RJB
LM4040BIM3X-2.5
NRND
SOT-23
DBZ
3
3000
TBD
Call TI
Call TI
R2B
Addendum-Page 2
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
Orderable Device
2-Jun-2016
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
LM4040BIM3X-2.5/NOPB
ACTIVE
SOT-23
DBZ
3
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R2B
LM4040BIM3X-3.0/NOPB
ACTIVE
SOT-23
DBZ
3
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
RKB
LM4040BIM3X-4.1
NRND
SOT-23
DBZ
3
3000
TBD
Call TI
Call TI
R4B
LM4040BIM3X-4.1/NOPB
ACTIVE
SOT-23
DBZ
3
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R4B
LM4040BIM3X-5.0
NRND
SOT-23
DBZ
3
3000
TBD
Call TI
Call TI
R5B
LM4040BIM3X-5.0/NOPB
ACTIVE
SOT-23
DBZ
3
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R5B
LM4040BIM7-2.0/NOPB
ACTIVE
SC70
DCK
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
RJB
LM4040BIM7-2.5
NRND
SC70
DCK
5
1000
TBD
Call TI
Call TI
R2B
LM4040BIM7-2.5/NOPB
ACTIVE
SC70
DCK
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R2B
LM4040BIM7-5.0/NOPB
ACTIVE
SC70
DCK
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R5B
LM4040BIM7X-2.5/NOPB
ACTIVE
SC70
DCK
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R2B
LM4040BIZ-10.0/NOPB
ACTIVE
TO-92
LP
3
1800
Green (RoHS
& no Sb/Br)
CU SN
N / A for Pkg Type
4040B
IZ10
LM4040BIZ-2.5/NOPB
ACTIVE
TO-92
LP
3
1800
Green (RoHS
& no Sb/Br)
CU SN
N / A for Pkg Type
4040B
IZ2.5
LM4040BIZ-4.1/NOPB
ACTIVE
TO-92
LP
3
1800
Green (RoHS
& no Sb/Br)
CU SN
N / A for Pkg Type
4040B
IZ4.1
LM4040BIZ-5.0/NOPB
ACTIVE
TO-92
LP
3
1800
Green (RoHS
& no Sb/Br)
CU SN
N / A for Pkg Type
4040B
IZ5.0
LM4040CEM3-2.5
NRND
SOT-23
DBZ
3
1000
TBD
Call TI
Call TI
R2C
LM4040CEM3-2.5/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R2C
LM4040CEM3-3.0/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
RKC
LM4040CEM3-5.0
NRND
SOT-23
DBZ
3
1000
TBD
Call TI
Call TI
R5C
LM4040CEM3-5.0/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R5C
Addendum-Page 3
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
Orderable Device
2-Jun-2016
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
LM4040CEM3X-3.0/NOPB
ACTIVE
SOT-23
DBZ
3
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
RKC
LM4040CEM3X-5.0/NOPB
ACTIVE
SOT-23
DBZ
3
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R5C
LM4040CIM3-10.0
NRND
SOT-23
DBZ
3
1000
TBD
Call TI
Call TI
R0C
LM4040CIM3-10.0/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R0C
LM4040CIM3-2.0
NRND
SOT-23
DBZ
3
1000
TBD
Call TI
Call TI
RJC
LM4040CIM3-2.0/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
RJC
LM4040CIM3-2.5
NRND
SOT-23
DBZ
3
1000
TBD
Call TI
Call TI
R2C
LM4040CIM3-2.5/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R2C
LM4040CIM3-3.0
NRND
SOT-23
DBZ
3
1000
TBD
Call TI
Call TI
RKC
LM4040CIM3-3.0/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
RKC
LM4040CIM3-4.1
NRND
SOT-23
DBZ
3
1000
TBD
Call TI
Call TI
R4C
LM4040CIM3-4.1/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R4C
LM4040CIM3-5.0
NRND
SOT-23
DBZ
3
1000
TBD
Call TI
Call TI
R5C
LM4040CIM3-5.0/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R5C
LM4040CIM3-8.2
NRND
SOT-23
DBZ
3
1000
TBD
Call TI
Call TI
R8C
LM4040CIM3-8.2/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R8C
LM4040CIM3X-10
NRND
SOT-23
DBZ
3
3000
TBD
Call TI
Call TI
R0C
LM4040CIM3X-10/NOPB
ACTIVE
SOT-23
DBZ
3
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R0C
LM4040CIM3X-2.0/NOPB
ACTIVE
SOT-23
DBZ
3
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
RJC
LM4040CIM3X-2.5
NRND
SOT-23
DBZ
3
3000
TBD
Call TI
Call TI
R2C
LM4040CIM3X-2.5/NOPB
ACTIVE
SOT-23
DBZ
3
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R2C
LM4040CIM3X-3.0/NOPB
ACTIVE
SOT-23
DBZ
3
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
RKC
Addendum-Page 4
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
Orderable Device
2-Jun-2016
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
LM4040CIM3X-4.1
NRND
SOT-23
DBZ
3
3000
TBD
Call TI
Call TI
R4C
LM4040CIM3X-4.1/NOPB
ACTIVE
SOT-23
DBZ
3
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R4C
LM4040CIM3X-5.0
NRND
SOT-23
DBZ
3
3000
TBD
Call TI
Call TI
R5C
LM4040CIM3X-5.0/NOPB
ACTIVE
SOT-23
DBZ
3
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R5C
LM4040CIM7-2.0/NOPB
ACTIVE
SC70
DCK
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
RJC
LM4040CIM7-2.5/NOPB
ACTIVE
SC70
DCK
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R2C
LM4040CIM7X-2.5/NOPB
ACTIVE
SC70
DCK
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R2C
LM4040CIZ-10.0/NOPB
ACTIVE
TO-92
LP
3
1800
Green (RoHS
& no Sb/Br)
CU SN
N / A for Pkg Type
4040C
IZ10
LM4040CIZ-2.5/LFT8
ACTIVE
TO-92
LP
3
2000
Green (RoHS
& no Sb/Br)
CU SN
N / A for Pkg Type
4040C
IZ2.5
LM4040CIZ-2.5/NOPB
ACTIVE
TO-92
LP
3
1800
Green (RoHS
& no Sb/Br)
CU SN
N / A for Pkg Type
4040C
IZ2.5
LM4040CIZ-4.1/NOPB
ACTIVE
TO-92
LP
3
1800
Green (RoHS
& no Sb/Br)
CU SN
N / A for Pkg Type
4040C
IZ4.1
LM4040CIZ-5.0/NOPB
ACTIVE
TO-92
LP
3
1800
Green (RoHS
& no Sb/Br)
CU SN
N / A for Pkg Type
4040C
IZ5.0
LM4040DEM3-2.0
NRND
SOT-23
DBZ
3
1000
TBD
Call TI
Call TI
RJD
LM4040DEM3-2.0/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
RJD
LM4040DEM3-2.5/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R2D
LM4040DEM3-3.0/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
RKD
LM4040DEM3-5.0
NRND
SOT-23
DBZ
3
1000
TBD
Call TI
Call TI
R5D
LM4040DEM3-5.0/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R5D
LM4040DEM3X-2.5/NOPB
ACTIVE
SOT-23
DBZ
3
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R2D
LM4040DEM3X-5.0/NOPB
ACTIVE
SOT-23
DBZ
3
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R5D
Addendum-Page 5
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
Orderable Device
2-Jun-2016
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
LM4040DIM3-10.0
NRND
SOT-23
DBZ
3
1000
TBD
Call TI
Call TI
R0D
LM4040DIM3-10.0/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R0D
LM4040DIM3-2.0/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
RJD
LM4040DIM3-2.5
NRND
SOT-23
DBZ
3
1000
TBD
Call TI
Call TI
R2D
LM4040DIM3-2.5/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R2D
LM4040DIM3-3.0/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
RKD
LM4040DIM3-4.1
NRND
SOT-23
DBZ
3
1000
TBD
Call TI
Call TI
R4D
LM4040DIM3-4.1/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R4D
LM4040DIM3-5.0
NRND
SOT-23
DBZ
3
1000
TBD
Call TI
Call TI
R5D
LM4040DIM3-5.0/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R5D
LM4040DIM3-8.2/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R8D
LM4040DIM3X-10
NRND
SOT-23
DBZ
3
3000
TBD
Call TI
Call TI
R0D
LM4040DIM3X-10/NOPB
ACTIVE
SOT-23
DBZ
3
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R0D
LM4040DIM3X-2.0/NOPB
ACTIVE
SOT-23
DBZ
3
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
RJD
LM4040DIM3X-2.5
NRND
SOT-23
DBZ
3
3000
TBD
Call TI
Call TI
R2D
LM4040DIM3X-2.5/NOPB
ACTIVE
SOT-23
DBZ
3
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R2D
LM4040DIM3X-3.0/NOPB
ACTIVE
SOT-23
DBZ
3
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
RKD
LM4040DIM3X-4.1
NRND
SOT-23
DBZ
3
3000
TBD
Call TI
Call TI
R4D
LM4040DIM3X-4.1/NOPB
ACTIVE
SOT-23
DBZ
3
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R4D
LM4040DIM3X-5.0
NRND
SOT-23
DBZ
3
3000
TBD
Call TI
Call TI
R5D
LM4040DIM3X-5.0/NOPB
ACTIVE
SOT-23
DBZ
3
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R5D
Addendum-Page 6
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
Orderable Device
2-Jun-2016
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
LM4040DIM7-2.0/NOPB
ACTIVE
SC70
DCK
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
RJD
LM4040DIM7-2.5/NOPB
ACTIVE
SC70
DCK
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R2D
LM4040DIM7-5.0
NRND
SC70
DCK
5
1000
TBD
Call TI
Call TI
R5D
LM4040DIM7-5.0/NOPB
ACTIVE
SC70
DCK
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R5D
LM4040DIZ-10.0/NOPB
ACTIVE
TO-92
LP
3
1800
Green (RoHS
& no Sb/Br)
CU SN
N / A for Pkg Type
4040D
IZ10
LM4040DIZ-2.5/NOPB
ACTIVE
TO-92
LP
3
1800
Green (RoHS
& no Sb/Br)
CU SN
N / A for Pkg Type
4040D
IZ2.5
LM4040DIZ-4.1/NOPB
ACTIVE
TO-92
LP
3
1800
Green (RoHS
& no Sb/Br)
CU SN
N / A for Pkg Type
4040D
IZ4.1
LM4040DIZ-5.0/LFT1
ACTIVE
TO-92
LP
3
2000
Green (RoHS
& no Sb/Br)
CU SN
N / A for Pkg Type
4040D
IZ5.0
LM4040DIZ-5.0/NOPB
ACTIVE
TO-92
LP
3
1800
Green (RoHS
& no Sb/Br)
CU SN
N / A for Pkg Type
4040D
IZ5.0
LM4040EEM3-2.5/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R2E
LM4040EEM3-3.0/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
RKE
LM4040EIM3-2.5
NRND
SOT-23
DBZ
3
1000
TBD
Call TI
Call TI
R2E
LM4040EIM3-2.5/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R2E
LM4040EIM3-3.0/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
RKE
LM4040EIM3X-2.5
NRND
SOT-23
DBZ
3
3000
TBD
Call TI
Call TI
R2E
LM4040EIM3X-2.5/NOPB
ACTIVE
SOT-23
DBZ
3
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R2E
LM4040EIM3X-3.0/NOPB
ACTIVE
SOT-23
DBZ
3
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
RKE
LM4040EIM7-2.0/NOPB
ACTIVE
SC70
DCK
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
RJE
LM4040QAIM3-2.5/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R6A
Addendum-Page 7
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
Orderable Device
2-Jun-2016
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
LM4040QAIM3X2.5/NOPB
ACTIVE
SOT-23
DBZ
3
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R6A
LM4040QBIM3-2.5/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R6B
LM4040QBIM3X2.5/NOPB
ACTIVE
SOT-23
DBZ
3
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R6B
LM4040QCEM3-2.5/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R2C
LM4040QCEM3-3.0/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
LM4040QCIM3-2.5/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R6C
LM4040QCIM3X2.5/NOPB
ACTIVE
SOT-23
DBZ
3
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R6C
LM4040QDEM3-2.5/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R2D
LM4040QDEM3-3.0/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
LM4040QDIM3-2.5/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R6D
LM4040QDIM3X2.5/NOPB
ACTIVE
SOT-23
DBZ
3
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R6D
LM4040QEEM3-2.5/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R2E
LM4040QEEM3-3.0/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
LM4040QEIM3-2.5/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R6E
LM4040QEIM3X2.5/NOPB
ACTIVE
SOT-23
DBZ
3
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R6E
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
Addendum-Page 8
-40 to 125
-40 to 125
-40 to 125
R3C
R3D
R3E
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
2-Jun-2016
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3)
MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4)
There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5)
Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
(6)
Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish
value exceeds the maximum column width.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
OTHER QUALIFIED VERSIONS OF LM4040-N, LM4040-N-Q1 :
• Catalog: LM4040-N
• Automotive: LM4040-N-Q1
NOTE: Qualified Version Definitions:
• Catalog - TI's standard catalog product
Addendum-Page 9
PACKAGE OPTION ADDENDUM
www.ti.com
2-Jun-2016
• Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects
Addendum-Page 10
PACKAGE MATERIALS INFORMATION
www.ti.com
2-Jun-2016
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
SOT-23
DBZ
3
1000
178.0
8.4
LM4040AIM3-10.0/NOPB SOT-23
LM4040AIM3-10.0
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
B0
(mm)
K0
(mm)
P1
(mm)
W
Pin1
(mm) Quadrant
3.3
2.9
1.22
4.0
8.0
Q3
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040AIM3-2.0
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040AIM3-2.0/NOPB
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040AIM3-2.5
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040AIM3-2.5/NOPB
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040AIM3-3.0
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040AIM3-3.0/NOPB
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040AIM3-4.1
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040AIM3-4.1/NOPB
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040AIM3-5.0
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040AIM3-5.0/NOPB
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040AIM3X-10
SOT-23
DBZ
3
3000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040AIM3X-10/NOPB SOT-23
DBZ
3
3000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040AIM3X-2.0/NOPB SOT-23
DBZ
3
3000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
SOT-23
DBZ
3
3000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040AIM3X-2.5/NOPB SOT-23
DBZ
3
3000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040AIM3X-3.0/NOPB SOT-23
DBZ
3
3000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040AIM3X-2.5
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
2-Jun-2016
Device
Package Package Pins
Type Drawing
LM4040AIM3X-4.1/NOPB SOT-23
SPQ
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
B0
(mm)
K0
(mm)
P1
(mm)
W
Pin1
(mm) Quadrant
DBZ
3
3000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
SOT-23
DBZ
3
3000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040AIM3X-5.0/NOPB SOT-23
LM4040AIM3X-5.0
DBZ
3
3000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040BIM3-10.0/NOPB SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040BIM3-2.0/NOPB
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040BIM3-2.5
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040BIM3-2.5/NOPB
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040BIM3-10.0
LM4040BIM3-3.0
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040BIM3-3.0/NOPB
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040BIM3-4.1
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040BIM3-4.1/NOPB
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040BIM3-5.0
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040BIM3-5.0/NOPB
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040BIM3-8.2
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040BIM3-8.2/NOPB
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040BIM3X-10/NOPB SOT-23
DBZ
3
3000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040BIM3X-2.0/NOPB SOT-23
DBZ
3
3000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
SOT-23
DBZ
3
3000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040BIM3X-2.5/NOPB SOT-23
DBZ
3
3000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040BIM3X-3.0/NOPB SOT-23
DBZ
3
3000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
SOT-23
DBZ
3
3000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040BIM3X-4.1/NOPB SOT-23
DBZ
3
3000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
DBZ
3
3000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040BIM3X-2.5
LM4040BIM3X-4.1
LM4040BIM3X-5.0
SOT-23
LM4040BIM3X-5.0/NOPB SOT-23
DBZ
3
3000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040BIM7-2.0/NOPB
SC70
DCK
5
1000
178.0
8.4
2.25
2.45
1.2
4.0
8.0
Q3
LM4040BIM7-2.5
SC70
DCK
5
1000
178.0
8.4
2.25
2.45
1.2
4.0
8.0
Q3
LM4040BIM7-2.5/NOPB
SC70
DCK
5
1000
178.0
8.4
2.25
2.45
1.2
4.0
8.0
Q3
LM4040BIM7-5.0/NOPB
SC70
DCK
5
1000
178.0
8.4
2.25
2.45
1.2
4.0
8.0
Q3
LM4040BIM7X-2.5/NOPB
SC70
DCK
5
3000
178.0
8.4
2.25
2.45
1.2
4.0
8.0
Q3
LM4040CEM3-2.5
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040CEM3-2.5/NOPB SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040CEM3-3.0/NOPB SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040CEM3-5.0/NOPB SOT-23
LM4040CEM3-5.0
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040CEM3X-3.0/NOPB SOT-23
DBZ
3
3000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040CEM3X-5.0/NOPB SOT-23
DBZ
3
3000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040CIM3-10.0/NOPB SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040CIM3-10.0
LM4040CIM3-2.0
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040CIM3-2.0/NOPB
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040CIM3-2.5
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040CIM3-2.5/NOPB
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
Pack Materials-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
2-Jun-2016
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
B0
(mm)
K0
(mm)
P1
(mm)
W
Pin1
(mm) Quadrant
LM4040CIM3-3.0
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040CIM3-3.0/NOPB
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040CIM3-4.1
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040CIM3-4.1/NOPB
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040CIM3-5.0
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040CIM3-5.0/NOPB
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040CIM3-8.2
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040CIM3-8.2/NOPB
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040CIM3X-10
SOT-23
DBZ
3
3000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040CIM3X-10/NOPB SOT-23
DBZ
3
3000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040CIM3X-2.0/NOPB SOT-23
DBZ
3
3000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
SOT-23
DBZ
3
3000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040CIM3X-2.5/NOPB SOT-23
LM4040CIM3X-2.5
DBZ
3
3000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040CIM3X-3.0/NOPB SOT-23
DBZ
3
3000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
SOT-23
DBZ
3
3000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040CIM3X-4.1/NOPB SOT-23
DBZ
3
3000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
DBZ
3
3000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040CIM3X-4.1
LM4040CIM3X-5.0
SOT-23
LM4040CIM3X-5.0/NOPB SOT-23
DBZ
3
3000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040CIM7-2.0/NOPB
SC70
DCK
5
1000
178.0
8.4
2.25
2.45
1.2
4.0
8.0
Q3
LM4040CIM7-2.5/NOPB
SC70
DCK
5
1000
178.0
8.4
2.25
2.45
1.2
4.0
8.0
Q3
LM4040CIM7X-2.5/NOPB
SC70
DCK
5
3000
178.0
8.4
2.25
2.45
1.2
4.0
8.0
Q3
LM4040DEM3-2.0
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040DEM3-2.0/NOPB SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040DEM3-2.5/NOPB SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040DEM3-3.0/NOPB SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040DEM3-5.0/NOPB SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040DEM3X-2.5/NOPB SOT-23
DBZ
3
3000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040DEM3X-5.0/NOPB SOT-23
DBZ
3
3000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040DIM3-10.0/NOPB SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040DIM3-2.0/NOPB
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040DIM3-2.5
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040DIM3-2.5/NOPB
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040DIM3-3.0/NOPB
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040DIM3-4.1
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040DIM3-4.1/NOPB
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040DEM3-5.0
LM4040DIM3-10.0
LM4040DIM3-5.0
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040DIM3-5.0/NOPB
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040DIM3-8.2/NOPB
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040DIM3X-10
SOT-23
DBZ
3
3000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040DIM3X-10/NOPB SOT-23
DBZ
3
3000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040DIM3X-2.0/NOPB SOT-23
DBZ
3
3000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
Pack Materials-Page 3
PACKAGE MATERIALS INFORMATION
www.ti.com
2-Jun-2016
Device
LM4040DIM3X-2.5
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
B0
(mm)
K0
(mm)
P1
(mm)
W
Pin1
(mm) Quadrant
SOT-23
DBZ
3
3000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040DIM3X-2.5/NOPB SOT-23
DBZ
3
3000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040DIM3X-3.0/NOPB SOT-23
DBZ
3
3000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
SOT-23
DBZ
3
3000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040DIM3X-4.1/NOPB SOT-23
DBZ
3
3000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
SOT-23
DBZ
3
3000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040DIM3X-5.0/NOPB SOT-23
DBZ
3
3000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040DIM3X-4.1
LM4040DIM3X-5.0
LM4040DIM7-2.0/NOPB
SC70
DCK
5
1000
178.0
8.4
2.25
2.45
1.2
4.0
8.0
Q3
LM4040DIM7-2.5/NOPB
SC70
DCK
5
1000
178.0
8.4
2.25
2.45
1.2
4.0
8.0
Q3
LM4040DIM7-5.0
SC70
DCK
5
1000
178.0
8.4
2.25
2.45
1.2
4.0
8.0
Q3
LM4040DIM7-5.0/NOPB
SC70
DCK
5
1000
178.0
8.4
2.25
2.45
1.2
4.0
8.0
Q3
LM4040EEM3-2.5/NOPB SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040EEM3-3.0/NOPB SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040EIM3-2.5
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040EIM3-2.5/NOPB
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040EIM3-3.0/NOPB
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040EIM3X-2.5
SOT-23
DBZ
3
3000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040EIM3X-2.5/NOPB SOT-23
DBZ
3
3000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040EIM3X-3.0/NOPB SOT-23
DBZ
3
3000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
DCK
5
1000
178.0
8.4
2.25
2.45
1.2
4.0
8.0
Q3
LM4040QAIM3-2.5/NOPB SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040QAIM3X2.5/NOPB SOT-23
DBZ
3
3000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040QBIM3-2.5/NOPB SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040QBIM3X2.5/NOPB SOT-23
DBZ
3
3000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040QCEM3-2.5/NOP
B
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040QCEM3-3.0/NOP
B
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040EIM7-2.0/NOPB
SC70
LM4040QCIM3-2.5/NOPB SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040QCIM3X2.5/NOP
B
SOT-23
DBZ
3
3000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040QDEM3-2.5/NOP
B
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040QDEM3-3.0/NOP
B
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040QDIM3-2.5/NOPB SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040QDIM3X2.5/NOP
B
SOT-23
DBZ
3
3000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040QEEM3-2.5/NOP
B
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040QEEM3-3.0/NOP
B
SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040QEIM3-2.5/NOPB SOT-23
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040QEIM3X2.5/NOPB SOT-23
DBZ
3
3000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
Pack Materials-Page 4
PACKAGE MATERIALS INFORMATION
www.ti.com
2-Jun-2016
*All dimensions are nominal
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
LM4040AIM3-10.0
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040AIM3-10.0/NOPB
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040AIM3-2.0
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040AIM3-2.0/NOPB
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040AIM3-2.5
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040AIM3-2.5/NOPB
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040AIM3-3.0
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040AIM3-3.0/NOPB
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040AIM3-4.1
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040AIM3-4.1/NOPB
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040AIM3-5.0
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040AIM3-5.0/NOPB
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040AIM3X-10
SOT-23
DBZ
3
3000
210.0
185.0
35.0
LM4040AIM3X-10/NOPB
SOT-23
DBZ
3
3000
210.0
185.0
35.0
LM4040AIM3X-2.0/NOPB
SOT-23
DBZ
3
3000
210.0
185.0
35.0
LM4040AIM3X-2.5
SOT-23
DBZ
3
3000
210.0
185.0
35.0
LM4040AIM3X-2.5/NOPB
SOT-23
DBZ
3
3000
210.0
185.0
35.0
LM4040AIM3X-3.0/NOPB
SOT-23
DBZ
3
3000
210.0
185.0
35.0
LM4040AIM3X-4.1/NOPB
SOT-23
DBZ
3
3000
210.0
185.0
35.0
LM4040AIM3X-5.0
SOT-23
DBZ
3
3000
210.0
185.0
35.0
Pack Materials-Page 5
PACKAGE MATERIALS INFORMATION
www.ti.com
2-Jun-2016
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
LM4040AIM3X-5.0/NOPB
SOT-23
DBZ
3
3000
210.0
185.0
35.0
LM4040BIM3-10.0
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040BIM3-10.0/NOPB
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040BIM3-2.0/NOPB
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040BIM3-2.5
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040BIM3-2.5/NOPB
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040BIM3-3.0
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040BIM3-3.0/NOPB
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040BIM3-4.1
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040BIM3-4.1/NOPB
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040BIM3-5.0
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040BIM3-5.0/NOPB
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040BIM3-8.2
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040BIM3-8.2/NOPB
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040BIM3X-10/NOPB
SOT-23
DBZ
3
3000
210.0
185.0
35.0
LM4040BIM3X-2.0/NOPB
SOT-23
DBZ
3
3000
210.0
185.0
35.0
LM4040BIM3X-2.5
SOT-23
DBZ
3
3000
210.0
185.0
35.0
LM4040BIM3X-2.5/NOPB
SOT-23
DBZ
3
3000
210.0
185.0
35.0
LM4040BIM3X-3.0/NOPB
SOT-23
DBZ
3
3000
210.0
185.0
35.0
LM4040BIM3X-4.1
SOT-23
DBZ
3
3000
210.0
185.0
35.0
LM4040BIM3X-4.1/NOPB
SOT-23
DBZ
3
3000
210.0
185.0
35.0
LM4040BIM3X-5.0
SOT-23
DBZ
3
3000
210.0
185.0
35.0
LM4040BIM3X-5.0/NOPB
SOT-23
DBZ
3
3000
210.0
185.0
35.0
LM4040BIM7-2.0/NOPB
SC70
DCK
5
1000
210.0
185.0
35.0
LM4040BIM7-2.5
SC70
DCK
5
1000
210.0
185.0
35.0
LM4040BIM7-2.5/NOPB
SC70
DCK
5
1000
210.0
185.0
35.0
LM4040BIM7-5.0/NOPB
SC70
DCK
5
1000
210.0
185.0
35.0
LM4040BIM7X-2.5/NOPB
SC70
DCK
5
3000
210.0
185.0
35.0
LM4040CEM3-2.5
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040CEM3-2.5/NOPB
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040CEM3-3.0/NOPB
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040CEM3-5.0
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040CEM3-5.0/NOPB
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040CEM3X-3.0/NOPB
SOT-23
DBZ
3
3000
210.0
185.0
35.0
LM4040CEM3X-5.0/NOPB
SOT-23
DBZ
3
3000
210.0
185.0
35.0
LM4040CIM3-10.0
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040CIM3-10.0/NOPB
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040CIM3-2.0
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040CIM3-2.0/NOPB
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040CIM3-2.5
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040CIM3-2.5/NOPB
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040CIM3-3.0
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040CIM3-3.0/NOPB
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040CIM3-4.1
SOT-23
DBZ
3
1000
210.0
185.0
35.0
Pack Materials-Page 6
PACKAGE MATERIALS INFORMATION
www.ti.com
2-Jun-2016
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
LM4040CIM3-4.1/NOPB
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040CIM3-5.0
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040CIM3-5.0/NOPB
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040CIM3-8.2
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040CIM3-8.2/NOPB
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040CIM3X-10
SOT-23
DBZ
3
3000
210.0
185.0
35.0
LM4040CIM3X-10/NOPB
SOT-23
DBZ
3
3000
210.0
185.0
35.0
LM4040CIM3X-2.0/NOPB
SOT-23
DBZ
3
3000
210.0
185.0
35.0
LM4040CIM3X-2.5
SOT-23
DBZ
3
3000
210.0
185.0
35.0
LM4040CIM3X-2.5/NOPB
SOT-23
DBZ
3
3000
210.0
185.0
35.0
LM4040CIM3X-3.0/NOPB
SOT-23
DBZ
3
3000
210.0
185.0
35.0
LM4040CIM3X-4.1
SOT-23
DBZ
3
3000
210.0
185.0
35.0
LM4040CIM3X-4.1/NOPB
SOT-23
DBZ
3
3000
210.0
185.0
35.0
LM4040CIM3X-5.0
SOT-23
DBZ
3
3000
210.0
185.0
35.0
LM4040CIM3X-5.0/NOPB
SOT-23
DBZ
3
3000
210.0
185.0
35.0
LM4040CIM7-2.0/NOPB
SC70
DCK
5
1000
210.0
185.0
35.0
LM4040CIM7-2.5/NOPB
SC70
DCK
5
1000
210.0
185.0
35.0
LM4040CIM7X-2.5/NOPB
SC70
DCK
5
3000
210.0
185.0
35.0
LM4040DEM3-2.0
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040DEM3-2.0/NOPB
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040DEM3-2.5/NOPB
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040DEM3-3.0/NOPB
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040DEM3-5.0
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040DEM3-5.0/NOPB
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040DEM3X-2.5/NOPB
SOT-23
DBZ
3
3000
210.0
185.0
35.0
LM4040DEM3X-5.0/NOPB
SOT-23
DBZ
3
3000
210.0
185.0
35.0
LM4040DIM3-10.0
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040DIM3-10.0/NOPB
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040DIM3-2.0/NOPB
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040DIM3-2.5
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040DIM3-2.5/NOPB
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040DIM3-3.0/NOPB
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040DIM3-4.1
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040DIM3-4.1/NOPB
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040DIM3-5.0
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040DIM3-5.0/NOPB
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040DIM3-8.2/NOPB
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040DIM3X-10
SOT-23
DBZ
3
3000
210.0
185.0
35.0
LM4040DIM3X-10/NOPB
SOT-23
DBZ
3
3000
210.0
185.0
35.0
LM4040DIM3X-2.0/NOPB
SOT-23
DBZ
3
3000
210.0
185.0
35.0
LM4040DIM3X-2.5
SOT-23
DBZ
3
3000
210.0
185.0
35.0
LM4040DIM3X-2.5/NOPB
SOT-23
DBZ
3
3000
210.0
185.0
35.0
LM4040DIM3X-3.0/NOPB
SOT-23
DBZ
3
3000
210.0
185.0
35.0
LM4040DIM3X-4.1
SOT-23
DBZ
3
3000
210.0
185.0
35.0
Pack Materials-Page 7
PACKAGE MATERIALS INFORMATION
www.ti.com
2-Jun-2016
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
LM4040DIM3X-4.1/NOPB
SOT-23
DBZ
3
3000
210.0
185.0
35.0
LM4040DIM3X-5.0
SOT-23
DBZ
3
3000
210.0
185.0
35.0
LM4040DIM3X-5.0/NOPB
SOT-23
DBZ
3
3000
210.0
185.0
35.0
LM4040DIM7-2.0/NOPB
SC70
DCK
5
1000
210.0
185.0
35.0
LM4040DIM7-2.5/NOPB
SC70
DCK
5
1000
210.0
185.0
35.0
LM4040DIM7-5.0
SC70
DCK
5
1000
210.0
185.0
35.0
LM4040DIM7-5.0/NOPB
SC70
DCK
5
1000
210.0
185.0
35.0
LM4040EEM3-2.5/NOPB
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040EEM3-3.0/NOPB
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040EIM3-2.5
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040EIM3-2.5/NOPB
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040EIM3-3.0/NOPB
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040EIM3X-2.5
SOT-23
DBZ
3
3000
210.0
185.0
35.0
LM4040EIM3X-2.5/NOPB
SOT-23
DBZ
3
3000
210.0
185.0
35.0
LM4040EIM3X-3.0/NOPB
SOT-23
DBZ
3
3000
210.0
185.0
35.0
LM4040EIM7-2.0/NOPB
SC70
DCK
5
1000
210.0
185.0
35.0
LM4040QAIM3-2.5/NOPB
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040QAIM3X2.5/NOPB
SOT-23
DBZ
3
3000
210.0
185.0
35.0
LM4040QBIM3-2.5/NOPB
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040QBIM3X2.5/NOPB
SOT-23
DBZ
3
3000
210.0
185.0
35.0
LM4040QCEM3-2.5/NOPB
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040QCEM3-3.0/NOPB
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040QCIM3-2.5/NOPB
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040QCIM3X2.5/NOPB
SOT-23
DBZ
3
3000
210.0
185.0
35.0
LM4040QDEM3-2.5/NOPB
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040QDEM3-3.0/NOPB
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040QDIM3-2.5/NOPB
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040QDIM3X2.5/NOPB
SOT-23
DBZ
3
3000
210.0
185.0
35.0
LM4040QEEM3-2.5/NOPB
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040QEEM3-3.0/NOPB
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040QEIM3-2.5/NOPB
SOT-23
DBZ
3
1000
210.0
185.0
35.0
LM4040QEIM3X2.5/NOPB
SOT-23
DBZ
3
3000
210.0
185.0
35.0
Pack Materials-Page 8
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
Automotive and Transportation
www.ti.com/automotive
Amplifiers
amplifier.ti.com
Communications and Telecom
www.ti.com/communications
Data Converters
dataconverter.ti.com
Computers and Peripherals
www.ti.com/computers
DLP® Products
www.dlp.com
Consumer Electronics
www.ti.com/consumer-apps
DSP
dsp.ti.com
Energy and Lighting
www.ti.com/energy
Clocks and Timers
www.ti.com/clocks
Industrial
www.ti.com/industrial
Interface
interface.ti.com
Medical
www.ti.com/medical
Logic
logic.ti.com
Security
www.ti.com/security
Power Mgmt
power.ti.com
Space, Avionics and Defense
www.ti.com/space-avionics-defense
Microcontrollers
microcontroller.ti.com
Video and Imaging
www.ti.com/video
RFID
www.ti-rfid.com
OMAP Applications Processors
www.ti.com/omap
TI E2E Community
e2e.ti.com
Wireless Connectivity
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2016, Texas Instruments Incorporated