ICST ICS8701CYIT Low skew ã·1, ã·2 clock generator Datasheet

ICS8701I
LOW SKEW ¸1, ¸2
Integrated
Circuit
Systems, Inc.
CLOCK GENERATOR
GENERAL DESCRIPTION
FEATURES
• 20 LVCMOS outputs, 7W typical output impedance
The ICS8701I is a low skew, ÷1, ÷2 Clock Generator and a member of the HiPerClockS™
HiPerClockS™ family of High Performance Clock Solutions
from ICS. The low impedance LVCMOS outputs are designed to drive 50W series or parallel terminated transmission lines. The effective fanout can
be increased from 20 to 40 by utilizing the ability of the
outputs to drive two series terminated lines.
,&6
• Output frequency up to 250MHz
• 200ps bank skew, 250ps output skew, 300ps multiple
frequency skew, 600ps part-to-part skew
• LVCMOS / LVTTL clock input
• LVCMOS control inputs
The divide select inputs, DIV_SELx, control the output frequency of each bank. The outputs can be utilized in the ÷1,
÷2 or a combination of ÷1 and ÷2 modes. The bank enable
inputs, BANK_EN0:1, support enabling and disabling each
bank of outputs individually. The master reset input, nMR/
OE, resets the internal frequency dividers and also controls the active and high impedance states of all outputs.
• Bank enable logic allows unused banks to be disabled
in reduced fanout applications
The ICS8701I is characterized at 3.3V and mixed 3.3V input supply, and 2.5V output supply operating modes. Guaranteed bank, output and part-to-part skew characteristics
make the ICS8701I ideal for those clock distribution applications demanding well defined performance and repeatability.
• -40°C to 85°C ambient operating temperature
BLOCK DIAGRAM
PIN ASSIGNMENT
¸1
1
¸2
0
• 48 lead low-profile QFP (LQFP), 7mm x 7mm x 1.4mm
package body, 0.5mm package lead pitch
• Other divide values available on request
GND
QB2
GND
QB3
VDDO
QB4
QC0
VDDO
QC1
GND
QC2
GND
LVCMOS_CLK
• 3.3V or mixed 3.3V input, 2.5V output operating
supply modes
QAO - QA4
QC3
VDDO
QC4
QD0
VDDO
QD1
GND
QD2
GND
QD3
VDDO
QD4
DIV_SELA
1
QB0 - QB4
0
DIV_SELB
1
QC0 - QC4
0
DIV_SELC
1
QD0 - QD4
0
ICS8701I
QB1
VDDO
QB0
QA4
VDDO
QA3
GND
QA2
GND
QA1
VDDO
QA0
DIV_SELA
DIV_SELB
LVCMOS_CLK
GND
VDDI
BANK_EN0
GND
BANK_EN1
VDDI
nMR/OE
DIV_SELC
DIV_SELD
DIV_SELD
nMR/OE
BANK_EN0
BANK_EN1
48 47 46 45 44 43 42 41 40 39 38 37
1
36
2
35
3
34
4
33
5
32
6
31
7
30
8
29
9
28
10
27
11
26
12
25
13 14 15 16 17 18 19 20 21 22 23
24
Bank Enable
Logic
48-Pin LQFP
Y Package
Top View
8701I
www.icst.com/products/hiperclocks.html
1
REV. A MARCH 16, 2001
ICS8701I
LOW SKEW ¸1, ¸2
Integrated
Circuit
Systems, Inc.
CLOCK GENERATOR
TABLE 1. PIN DESCRIPTIONS
Number
2, 5,
11, 26,
32, 35,
41, 44
7, 9, 18,
21, 28, 30,
37, 39, 46,
48
16, 20
25, 27,
29,
31, 33
34, 36,
38,
40, 42
43, 45,
47,
1, 3
4, 6,
8,
10, 12
22
13
DIV_SELD
Input
14
DIV_SELC
Input
23
DIV_SELB
Input
24
DIV_SELA
Input
17, 19
BANK_EN1,
BANK_EN0
Input
Pullup
Enables and disables outputs by banks. LVCMOS interface levels.
15
nMR/OE
Input
Pullup
Master reset and output enable. Enables and disables all outputs.
LVCMOS interface levels.
8701I
Name
Type
Description
VDDO
Power
Output power supply. Connect to 3.3V or 2.5V.
GND
Power
Ground. Connect to ground.
VDDI
QA0, QA1,
QA2,
QA3, QA4
QB0, QB1,
QB2,
QB3, QB4
QC0, QC1,
QC2,
QC3, QC4
QD0, QD1,
QD2,
QD3, QD4
LVCMOS_CLK
Power
Input power supply. Connect to 3.3V.
Output
Bank A outputs. LVCMOS interface levels.
7W typical output impedance.
Output
Bank B outputs. LVCMOS interface levels.
7W typical output impedance.
Output
Bank C outputs. LVCMOS interface levels.
7W typical output impedance.
Output
Bank D outputs. LVCMOS interface levels
7W typical output impedance.
Input
Pulldown Clock input. LVCMOS interface levels.
Controls frequency division for bank D outputs.
Pullup
LVCMOS interface levels.
Controls frequency division for bank C outputs.
Pullup
LVCMOS interface levels.
Controls frequency division for bank B outputs.
Pullup
LVCMOS interface levels.
Controls frequency division for bank A outputs.
Pullup
LVCMOS interface levels.
www.icst.com/products/hiperclocks.html
2
REV. A MARCH 16, 2001
ICS8701I
LOW SKEW ¸1, ¸2
Integrated
Circuit
Systems, Inc.
CLOCK GENERATOR
TABLE 2. PIN CHARACTERISTICS
Symbol
Parameter
Test Conditions
Minimum Typical
RPULLUP
LVCMOS_CLK
D
IV_SELA, DIV_SELB,
Input
D
I
V_SELC, DIV_SELD,
Capacitance
BANK_EN0, NMR/OE,
BANK_EN1,
Input Pullup Resistor
51
RPULLDOWN
Input Pulldown Resistor
51
CIN
CPD
Power Dissipation Capacitance
(per output)
ROUT
Maximum
Units
pF
KW
KW
VDDI, VDDO =
3.465V
VDDI = 3.465V,
VDDO = 2.625V
pF
pF
Output Impedance
W
7
TABLE 3. FUNCTION TABLE
Inputs
Outputs
nMR/OE
BANK_EN1
BANK_EN0
DIV_SELx
QA0 - QA4
QB0 - QB4
QC0 - QC4
QD0 - QD4
0
1
1
1
1
1
1
1
1
X
0
1
0
1
0
1
0
1
X
0
0
1
1
0
0
1
1
X
0
0
0
0
1
1
1
1
Hi Z
Active
Active
Active
Active
Active
Active
Active
Active
Hi Z
Hi Z
Active
Active
Active
Hi Z
Active
Active
Active
Hi Z
Hi Z
Hi Z
Active
Active
Hi Z
Hi Z
Active
Active
Hi Z
Hi Z
Hi Z
Hi Z
Active
Hi Z
Hi Z
Hi Z
Active
8701I
www.icst.com/products/hiperclocks.html
3
Qx
frequency
zero
fIN/2
fIN/2
fIN/2
fIN/2
fIN
fIN
fIN
fIN
REV. A MARCH 16, 2001
ICS8701I
LOW SKEW ¸1, ¸2
Integrated
Circuit
Systems, Inc.
CLOCK GENERATOR
ABSOLUTE MAXIMUM RATINGS
Supply Voltage
4.6V
Inputs
-0.5V to VDD + 0.5V
Outputs
-0.5V to VDDO + 0.5V
Ambient Operating Temperature
-40°C to 85°C
Storage Temperature
-65°C to 150°C
Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These
ratings are stress specifications only and functional operation of product at these condition or any conditions beyond
those listed in the DC Characteristics or AC Characteristics is not implied. Exposure to absolute maximum rating conditions for extended periods may affect product reliability.
TABLE 4A. POWER SUPPLY DC CHARACTERISTICS, VDDI=VDDO=3.3V±5%, TA=-40°C TO 85°C
Symbol
VDDI
VDDO
Parameter
Input Power Supply Voltage
Output Power Supply Voltage
Test Conditions
IDD
Quiescent Power Supply Current
Minimum
3.135
3.135
Typical
3.3
3.3
VDDI = VIH = 3.465V
VIL = 0V
Maximum
3.465
3.465
Units
V
V
100
mA
Maximum
Units
TABLE 4B. LVCMOS DC CHARACTERISTICS, VDDI=VDDO=3.3V±5%, TA=-40°C TO 85°C
Symbol
VIH
VIL
IIH
IIL
Parameter
Input
High Voltage
Input
Low Voltage
Input
High Current
Input
Low Current
DIV_SELA, DIV_SELB,
DIV_SELC, DIV_SELD,
BANK_EN0,
BANK_EN1, nMR/OE
LVCMOS_CLK
DIV_SELA, DIV_SELB,
DIV_SELC, DIV_SELD,
BANK_EN0,
BANK_EN1, nMR/OE
LVCMOS_CLK
DIV_SELA, DIV_SELB,
DIV_SELC, DIV_SELD,
BANK_EN0,
BANK_EN1, nMR/OE
LVCMOS_CLK
DIV_SELA, DIV_SELB,
DIV_SELC, DIV_SELD,
BANK_EN0,
BANK_EN1, nMR/OE
LVCMOS_CLK
VOH
Output High Voltage
VOL
Output Low Voltage
8701I
Test Conditions
Minimum
Typical
VDDI = 3.465V
2
3.8
V
VDDI = 3.465V
2
3.8
V
VDDI = 3.465V
-0.3
0.8
V
VDDI = 3.465V
-0.3
1.3
V
VDDI = VIN = 3.465V
5
µA
VDDI = VIN = 3.465V
150
µA
VDDI = 3.465V, VIN = 0V
-150
µA
VDDI = 3.465V, VIN = 0V
VDDI = VDDO = 3.135V
IOH = -36mA
VDDI = VDDO = 3.135V
IOL = 36mA
-5
µA
2.6
V
www.icst.com/products/hiperclocks.html
4
0.5
V
REV. A MARCH 16, 2001
ICS8701I
LOW SKEW ¸1, ¸2
Integrated
Circuit
Systems, Inc.
CLOCK GENERATOR
TABLE 5A. AC CHARACTERISTICS, VDDI=VDDO=3.3V±5%, TA=-40°C TO 85°C
Symbol
Parameter
fMAX
Maximum Input Frequency
Propagation Delay,
Low-to-High
Propagation Delay,
High-to-Low
Bank Skew; NOTE 2
tpLH
tpHL
tsk(b)
tsk(o)
Test Conditions
Minimum
Typical
Maximum
Units
250
MHz
0MHZ £ f £ 200MHz
2.2
3.6
ns
0MHZ £ f £ 200MHz
2.2
3.6
ns
Measured on rising edge at VDDO/2
200
ps
Measured on rising edge at VDDO/2
250
ps
Measured on rising edge at VDDO/2
300
ps
tsk(pp)
Output Skew; NOTE 3
Multiple Frequency Skew;
NOTE 4
Par t to Par t Skew; NOTE 5
600
ps
tR
Output Rise Time; NOTE 6
30% to 70%
200
900
ps
tF
Output Fall Time; NOTE 6
30% to 70%
Output Pulse Width
900
tCYCLE/2
+ 0.6
3.1
ps
tPW
200
tCYCLE/2
- 0.6
1.9
tsk(w)
Measured on rising edge at VDDO/2
0MHZ £ f £ 200MHz
tCYCLE/2
f = 200MHz
2.5
Output Enable Time;
f = 10MHz
6
tEN
NOTE 6
Output Disable Time;
tDIS
f = 10MHz
6
NOTE 6
NOTE 1: All parameters measured at 200MHz unless noted otherwise. All outputs terminated with 50W to VDDO/2.
NOTE 2: Defined as skew within a bank of outputs at the same supply voltages and with equal load conditions.
NOTE 3: Defined as skew across banks of outputs at the same supply voltages and with equal load conditions.
NOTE 4: Defined as skew across banks of outputs operating at different frequency with the same supply voltages
and equal load conditions.
NOTE 5: Defined as the skew at different outputs on different devices operating at the same supply voltages and
with equal load conditions.
NOTE 6: These parameters are guaranteed by characterization. Not tested in production.
8701I
www.icst.com/products/hiperclocks.html
5
ns
ns
ns
ns
REV. A MARCH 16, 2001
ICS8701I
LOW SKEW ¸1, ¸2
Integrated
Circuit
Systems, Inc.
CLOCK GENERATOR
TABLE 4C. POWER SUPPLY DC CHARACTERISTICS, VDDI=3.3V±5%, VDDO=2.5V±5%, TA=-40°C TO 85°C
Symbol
VDDI
VDDO
Parameter
Input Power Supply Voltage
Output Power Supply Voltage
Test Conditions
IDD
Quiescent Power Supply Current
Minimum
3.135
2.375
Typical
3.3
2.5
VDDI = VIH = 3.465V
VIL = 0V
Maximum
3.465
2.625
Units
V
V
100
mA
Maximum
Units
TABLE 4B. LVCMOS DC CHARACTERISTICS, VDDI=3.3V±5%, VDDO=2.5V±5%, TA=-40°C TO 85°C
Symbol
VIH
VIL
IIH
IIL
Parameter
Input
High Voltage
Input
Low Voltage
Input
High Current
Input
Low Current
DIV_SELA, DIV_SELB,
DIV_SELC, DIV_SELD,
BANK_EN0,
BANK_EN1, nMR/OE
LVCMOS_CLK
DIV_SELA, DIV_SELB,
DIV_SELC, DIV_SELD,
BANK_EN0,
BANK_EN1, nMR/OE
LVCMOS_CLK
DIV_SELA, DIV_SELB,
DIV_SELC, DIV_SELD,
BANK_EN0,
BANK_EN1, nMR/OE
LVCMOS_CLK
DIV_SELA, DIV_SELB,
DIV_SELC, DIV_SELD,
BANK_EN0,
BANK_EN1, nMR/OE
LVCMOS_CLK
VOH
Output High Voltage
VOL
Output Low Voltage
8701I
Test Conditions
Minimum
Typical
VDDI = 3.465V
2
3.8
V
VDDI = 3.465V
2
3.8
V
VDDI = 3.465V
-0.3
0.8
V
VDDI = 3.465V
-0.3
1.3
V
VIN = 3.465V
5
µA
VIN = 3.465V
150
µA
VIN = 0V
-150
µA
VIN = 0V
VDDI = 3.135V,
VDDO = 2.375V
IOH = -27mA
VDDI = 3.135V,
VDDO = 2.375V
IOH = 27mA
-5
µA
1.8
V
www.icst.com/products/hiperclocks.html
6
0.5
V
REV. A MARCH 16, 2001
ICS8701I
LOW SKEW ¸1, ¸2
Integrated
Circuit
Systems, Inc.
CLOCK GENERATOR
TABLE 5B. AC CHARACTERISTICS, VDDI=3.3V±5%, VDDO=2.5V±5%, TA=-40°C TO 85°C
Symbol
Parameter
fMAX
Maximum Input Frequency
Propagation Delay,
Low-to-High
Propagation Delay,
High-to-Low
Bank Skew; NOTE 2
tpLH
tpHL
tsk(b)
Test Conditions
Minimum
Typical
Maximum
Units
250
MHz
0MHZ £ f £ 200MHz
2.4
3.7
ns
0MHZ £ f £ 200MHz
2.4
3.7
ns
Measured on rising edge at VDDO/2
225
ps
Measured on rising edge at VDDO/2
250
ps
Measured on rising edge at VDDO/2
300
ps
tsk(pp)
Output Skew; NOTE 3
Multiple Frequency Skew;
NOTE 4
Par t to Par t Skew; NOTE 5
Measured on rising edge at VDDO/2
650
ps
tR
Output Rise Time; NOTE 6
30% to 70%
200
900
ps
tF
Output Fall Time; NOTE 6
30% to 70%
Output Pulse Width
900
tCYCLE/2
+ 0.6
3.1
ps
tPW
200
tCYCLE/2
- 0.6
1.9
tsk(o)
tsk(w)
0MHZ £ f £ 200MHz
tCYCLE/2
f = 200MHz
2.5
Output Enable Time;
f = 10MHz
6
tEN
NOTE 6
Output Disable Time;
tDIS
f = 10MHz
6
NOTE 6
NOTE 1: All parameters measured at 200MHz unless noted otherwise. All outputs terminated with 50W to VDDO/2.
NOTE 2: Defined as skew within a bank of outputs at the same supply voltages and with equal load conditions.
NOTE 3: Defined as skew across banks of outputs at the same supply voltages and with equal load conditions.
NOTE 4: Defined as skew across banks of outputs operating at different frequency with the same supply voltages
and equal load conditions.
NOTE 5: Defined as the skew at different outputs on different devices operating at the same supply voltages and
with equal load conditions.
NOTE 6: These parameters are guaranteed by characterization. Not tested in production.
8701I
www.icst.com/products/hiperclocks.html
7
ns
ns
ns
ns
REV. A MARCH 16, 2001
ICS8701I
LOW SKEW ¸1, ¸2
Integrated
Circuit
Systems, Inc.
CLOCK GENERATOR
FIGURE 1A, 1B - TIMING DIAGRAMS
CLK
Qx, ÷1
Qx, ÷2
FIGURE 1A - ACTIVE, ÷1, ÷2
nMR/OE
CLK
Qx, ÷1
Qx, ÷2
High Impedance
Active
FIGURE 1B - RESET TO ACTIVE, ÷1, ÷2
8701I
www.icst.com/products/hiperclocks.html
8
REV. A MARCH 16, 2001
ICS8701I
LOW SKEW ¸1, ¸2
Integrated
Circuit
Systems, Inc.
CLOCK GENERATOR
FIGURE 2A, 2B - TIMING WAVEFORMS
CLK
tPHL
tPLH
Q
VDDO/2
FIGURE 2A - PROPAGATION DELAYS
fin = 200MHz, Vamp = 3.3V, tr = tf = 600ps
nMR/OE,
BANK_ENx
3.3V
BANK_ENx
0V
tPHZ
Q
tPZH
VOH
VOH - 300mV
VDDO/2
tPLZ
tPZL
VDDO/2
VOL + 300mV
Q
VOL
FIGURE 2B - DISABLE AND ENABLE TIMES
fin = 10MHz, Vamp = 3.3V, tr = tf = 600ps
8701I
www.icst.com/products/hiperclocks.html
9
REV. A MARCH 16, 2001
ICS8701I
LOW SKEW ¸1, ¸2
Integrated
Circuit
Systems, Inc.
CLOCK GENERATOR
FIGURE 3A, 3B - SKEW DEFINITIONS & WAVEFORMS
Bank Skew - Skew between outputs within a bank. Outputs operating at the same temperature, supply voltages and with
equal load conditions.
CLK
VDDO/2
VDDO/2
○
○
○
○
○
○
○
○
Qx0
tsk(b)
tsk(b)
Qx4
VDDO/2
VDDO/2
FIGURE 3A - BANK SKEW
fin = 200MHz, Vamp = 3.3V, tr = tf = 200ps
Output Skew - Skew between outputs of any bank. Outputs operating at the same temperature, supply voltages and with
equal load conditions.
CLK
QA0 - QA4
VDDO/2
VDDO/2
tsk(o)
tsk(o)
QB0 - QB4
QC0 - QC4
QD0 - QD4
VDDO/2
VDDO/2
FIGURE 3B - OUTPUT SKEW
fin = 200MHz, Vamp = 3.3V, tr = tf = 200ps
8701I
www.icst.com/products/hiperclocks.html
10
REV. A MARCH 16, 2001
ICS8701I
LOW SKEW ¸1, ¸2
Integrated
Circuit
Systems, Inc.
CLOCK GENERATOR
FIGURE 3C, 3D - SKEW DEFINITIONS & WAVEFORMS
Multiple Frequency Skew - Skew between banks of outputs operating at different frequencies. Outputs operating at the
same temperature, supply voltages and with equal load conditions.
CLK
QA0 - QA4,
QB0 - QB4,
QC0 - QC4,
or
QD0 - QD4
VDDO/2
VDDO/2
in ÷1
tsk(w)
tsk(w)
VDDO/2
QA0 - QA4,
QB0 - QB4,
QC0 - QC4,
or
QD0 - QD4
in ÷2
VDDO/2
FIGURE 3C - MULTIPLE FREQUENCY SKEW
fin = 200MHz, Vamp = 3.3V, tr = tf = 200ps
Part to Part Skew - Skew between outputs of any bank on different parts. Outputs operating at the same temperature, supply
voltages and with equal load conditions.
CLK
VDDO/2
PART 1 QA0 - QA4
QB0 - QB4
QC0 - QC4
QD0 - QD4
VDDO/2
tsk(p)
tsk(p)
VDDO/2
PART 2 QA0 - QA4
QB0 - QB4
QC0 - QC4
QD0 - QD4
8701I
VDDO/2
FIGURE 3B - OUTPUT SKEW
fin = 200MHz, Vamp = 3.3V, tr = tf = 200ps
www.icst.com/products/hiperclocks.html
11
REV. A MARCH 16, 2001
ICS8701I
LOW SKEW ¸1, ¸2
Integrated
Circuit
Systems, Inc.
CLOCK GENERATOR
PACKAGE OUTLINE - Y SUFFIX
D
D2
θ
48
37
36
1
2
3
L
E1
E
E2
N
12
13
24
25
e
A
D1
A2
-Cccc C
A1
SEATING
PLANE
c
b
TABLE 6. PACKAGE DIMENSIONS
JEDEC VARIATION
ALL DIMENSIONS IN MILLIMETERS
BCC
SYMBOL
MINIMUM
NOMINAL
MAXIMUM
48
N
1.60
A
A1
0.05
0.15
A2
1.35
1.40
1.45
b
0.17
0.22
0.27
c
0.09
0.20
D
9.00 BASIC
D1
7.00 BASIC
D2
5.50
E
9.00 BASIC
E1
7.00 BASIC
E2
5.50
e
0.5 BASIC
L
0.45
q
0°
0.60
0.75
7°
0.08
ccc
Reference Document: JEDEC Publication 95, MS-026
8701I
www.icst.com/products/hiperclocks.html
12
REV. A MARCH 16, 2001
ICS8701I
LOW SKEW ¸1, ¸2
Integrated
Circuit
Systems, Inc.
CLOCK GENERATOR
TABLE 7. ORDERING INFORMATION
Part/Order Number
Marking
Package
Count
Temperature
ICS8701CYI
ICS8701CYI
48 Lead LQFP
250 per tray
-40°C to 85°C
ICS8701CYIT
ICS8701CYI
48 Lead LQFP on Tape and Reel
2000
-40°C to 85°C
While the information presented herein has been checked for both accuracy and reliability, Integrated Circuit Systems, Incorporated (ICS) assumes no responsibility for either its use or
for infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal
commercial and industrial applications. Any other applications such as those requiring high reliability, or other extraordinary environmental requirements are not recommended without
additional processing by ICS. ICS reserves the right to change any circuitry or specifications without notice. ICS does not authorize or warrant any ICS product for use in life support
devices or critical medical instruments.
8701I
www.icst.com/products/hiperclocks.html
13
REV. A MARCH 16, 2001
Similar pages