ILLUMINATION LUXEON FlipChip Royal Blue High current density Chip Scale Package (CSP) LED Customers now have complete design flexibility to access Lumileds industry leading performance at the die level and customize the phosphor and packaging to best suit their lighting applications with two package sizes, 0.5mm2 and 1.0mm2 LUXEON FlipChip Royal Blue. LUXEON FlipChip Royal Blue is a real Chip Scale Package (CSP) LED that can be attached by reflow without additional packaging. Traditional wire bonding limits the packing and power density of LEDs. LUXEON FlipChip Royal Blue LEDs can be packaged closer and can be driven at a higher current density, therefore requiring fewer emitters to achieve a higher lumen output at higher lumen densities. FEATURES AND BENEFITS PRIMARY APPLICATIONS Micro sized CSP: 0.5mm2 and1.0mm2 package for design flexibility and packing density Display No wire bonds allows for SMT direct attach and reflow Flash 5-sided emitter enables wide viewing angles Illumination 445–460nm wavelength range for dispense and remote phosphor applications Low thermal resistance of 1.5°K/W (1mm2) for leading system level lm/$ RoHS COMPLIANT DS116 LUXEON FlipChip Royal Blue Product Datasheet ©2016 Lumileds Holding B.V. All rights reserved. Table of Contents General Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Product Test Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Part Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Lumen Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Performance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Product Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Optical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical and Thermal Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Characteristic Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Spectral Power Distribution Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Forward Current Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Color Shift Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Radiation Pattern Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Product Bin and Labeling Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Decoding Product Bin Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Radiometric Power Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Dominant Wavelength Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Forward Voltage Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Reflow Soldering Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Packaging Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Bin Tape Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Product Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 DS116 LUXEON FlipChip Royal Blue Product Datasheet 20160722 ©2016 Lumileds Holding B.V. All rights reserved. i General Product Information Product Test Conditions LUXEON FlipChip Royal Blue LEDs are tested and binned with a DC drive current of 175mA for 0.5mm2 and 350mA for 1.0mm2 at a junction temperature, Tj, of 25ºC. Part Number Nomenclature Part numbers for LUXEON FlipChip Royal Blue follow the convention below: L 0 F 2 – B A A A C C C C 0 D D D 1 Where: A A A – designates minimum dominant wavelength (445=445nm, 450=450nm, 455=455nm) C C C C – designates die dimension (0500=0.5mm2, 1000=1.0mm2) D D D designates minimum radiometric power (275=275mW, 550=550mW) – Therefore, the following part number is used for a 1.0mm2 LUXEON FlipChip Royal Blue with a minimum dominant wavelength of 450nm and minimum radiometric power performance of 550mW: L 0 F 2 – B 4 5 0 1 0 0 0 0 5 5 0 1 Lumen Maintenance Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the long-term performance of this product. Environmental Compliance Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON FlipChip Royal Blue is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE). DS116 LUXEON FlipChip Royal Blue Product Datasheet 20160722 ©2016 Lumileds Holding B.V. All rights reserved. 2 Performance Characteristics Product Selection Guide Table 1. Product performance of LUXEON FlipChip Royal Blue at test current, Tj=25ºC. SIZE (mm2) DOMINANT WAVELENGTH [1] (nm) RADIOMETRIC POWER [2, 3] (mW) TEST CURRENT (mA) PART NUMBER MINIMUM MAXIMUM MINIMUM TYPICAL 445 450 275 287 175 L0F2-B445050002751 450 455 275 287 175 L0F2-B450050002751 455 460 275 287 175 L0F2-B455050002751 445 450 550 575 350 L0F2-B445100005501 450 455 550 575 350 L0F2-B450100005501 455 460 550 575 350 L0F2-B455100005501 0.5 1.0 Notes for Table 1: 1. Lumileds maintains a tolerance of ±2nm on dominant wavelength measurements. 2. Lumileds maintains a tolerance of ±6.5% on radiometric power measurements. 3. Radiometric power values are based on a die packaged on ceramic tile with high reflective surface and dome encapsulation. Optical Characteristics Table 2. Optical characteristics for LUXEON FlipChip Royal Blue at test current, Tj=25°C. PART NUMBER TYPICAL SPECTRA HALF-WIDTH (nm) TYPICAL TEMPERATURE COEFFICIENT OF DOMINANT WAVELENGTH [1] (nm/ºC) TYPICAL TOTAL INCLUDED ANGLE [2] TYPICAL VIEWING ANGLE [3] L0F2-B445050002751 24 0.05 149° 134° L0F2-B450050002751 24 0.05 149° 134° L0F2-B455050002751 24 0.05 149° 134° L0F2-B445100005501 24 0.05 148° 139° L0F2-B450100005501 24 0.05 148° 139° L0F2-B455100005501 24 0.05 148° 139° Notes for Table 2: 1. Measured between 25°C and 85°C at If=175mA (0.5mm2) and If=350mA (1mm2). 2. Total angle at which 90% of total luminous flux is captured. 3. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is ½ of the peak value. DS116 LUXEON FlipChip Royal Blue Product Datasheet 20160722 ©2016 Lumileds Holding B.V. All rights reserved. 3 Electrical and Thermal Characteristics Table 3. Electrical and thermal characteristics for LUXEON FlipChip Royal Blue at test current, Tj=25ºC. FORWARD VOLTAGE [1] (Vf) MINIMUM TYPICAL MAXIMUM TYPICAL TEMPERATURE COEFFICIENT OF FORWARD VOLTAGE [2] (mV/°C) L0F2-B4xx050002751 2.7 2.9 3.1 -2 to -3 2.5 L0F2-B4xx100005501 2.7 2.9 3.1 -2 to -3 1.5 PART NUMBER TYPICAL THERMAL RESISTANCE—JUNCTION TO SOLDER PAD (°C/W) Notes for Table 3: 1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements. 2. Measured between 25°C and 85°C. Absolute Maximum Ratings Table 4. Absolute maximum ratings for LUXEON FlipChip Royal Blue. PARAMETER MAXIMUM PERFORMANCE DC Forward Current [1,2] 500mA (0.5mm2) 1050mA (1.0mm2) Peak Pulsed Forward Current [1,3] 650mA (0.5mm2) 1300mA (1.0mm2) LED Junction Temperature [1] (DC & Pulse) 135°C ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012) CLASS 0B Operating Case Temperature [1] -40°C to 105°C LED Storage Temperature -40°C to 135°C Soldering Temperature 260°C if use SAC solder Allowable Reflow Cycles 3 Reverse Voltage (Vreverse) LUXEON LEDs are not designed to be driven in reverse bias Notes for Table 4: 1. Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature. 2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” are acceptable if the following conditions are met: – The frequency of the ripple current is 100Hz or higher – The average current for each cycle does not exceed the maximum allowable DC forward current – The maximum amplitude of the ripple does not exceed the maximum peak pulsed forward current 3. Pulsed operation with a peak drive current of 650mA (0.5mm2) and 1300mA (1.0mm2) is acceptable if the pulse on-time is ≤5ms per cycle and the duty cycle is ≤50%. DS116 LUXEON FlipChip Royal Blue Product Datasheet 20160722 ©2016 Lumileds Holding B.V. All rights reserved. 4 Characteristic Curves Spectral Power Distribution Characteristics Figure 1. Typical normalized power vs. wavelength for L0F2-Bxxxxxxx0xxx1 at specified test current, Tj=25ºC. Light Output Characteristics Figure 2. Typical normalized radiant power vs. junction temperature for L0F2-Bxxx050002751 at 175mA and L0F2-Bxxx100005501 at 350mA. DS116 LUXEON FlipChip Royal Blue Product Datasheet 20160722 ©2016 Lumileds Holding B.V. All rights reserved. 5 Figure 3. Typical relative radiometric power vs. forward current for L0F2-Bxxx050002751 at and L0F2-Bxxx100005501 at Tj=25ºC. Forward Current Characteristics Figure 4. Typical forward current vs. forward voltage for L0F2-Bxxxxxxx0xxx1 at Tj=25ºC. DS116 LUXEON FlipChip Royal Blue Product Datasheet 20160722 ©2016 Lumileds Holding B.V. All rights reserved. 6 Color Shift Characteristics Dominant Wavelength Shift (nm) Figure 5a. Dominant wavelength shift vs. junction temperature for L0F2-Bxxx050002751 at Tj=25ºC. Figure 5b. Dominant wavelength shift vs. junction temperature for L0F2-Bxxx100005501 at Tj=25ºC. DS116 LUXEON FlipChip Royal Blue Product Datasheet 20160722 ©2016 Lumileds Holding B.V. All rights reserved. 7 Dominant Wavelength Shift (nm) Figure 6a. Dominant wavelength shift vs. forward current for L0F2-Bxxx050002751 at Tj=25ºC. Figure 6b. Dominant wavelength shift vs. junction temperature for L0F2-Bxxx100005501 at Tj=25ºC. DS116 LUXEON FlipChip Royal Blue Product Datasheet 20160722 ©2016 Lumileds Holding B.V. All rights reserved. 8 Radiation Pattern Characteristics Figure 7. Typical radiation pattern for LUXEON FlipChip Royal Blue at specified test current mA, Tj=25ºC. Figure 8. Typical polar radiation pattern for LUXEON FlipChip Royal Blue at specified test current mA, Tj=25ºC. DS116 LUXEON FlipChip Royal Blue Product Datasheet 20160722 ©2016 Lumileds Holding B.V. All rights reserved. 9 Product Bin and Labeling Definitions Decoding Product Bin Labeling In the manufacturing of semiconductor products, there are variations in performance around the average values given in the technical datasheet. For this reason, Lumileds bins LED components for luminous flux or radiometric power, color point, peak or dominant wavelength and forward voltage. LUXEON FlipChip Royal Blue LEDs are labeled using a 4-digit alphanumeric CAT code following the format below: A B C D A – designates radiometric power bin (example: Z=300 to 325mW, B=350 to 375mW) B C – designates dominant wavelength bin (example: 4x=445 to 450nm, 5x=450 to 455nm) D designates forward voltage bin (example: 8=2.8 to 2.9V, 9=2.9 to 3.0V) – Therefore, a LUXEON FlipChip Royal Blue with a radiometric power range of 300 to 325mW, dominant wavelength range of 445 to 450nm and a forward voltage range of 2.8 to 2.9V has the following CAT code: Z 4 x 8 Radiometric Power Bins Table 5. Radiometric power bin definitions for LUXEON FlipChip Royal Blue. BIN RADIOMETRIC POWER [1] (mW) MINIMUM MAXIMUM Y 275 300 Z 300 325 A 325 350 B 350 375 G 550 600 H 600 650 I 650 700 Notes for Table 5: 1. Lumileds maintains a tolerance of ±6.5% on radiometric power measurements. DS116 LUXEON FlipChip Royal Blue Product Datasheet 20160722 ©2016 Lumileds Holding B.V. All rights reserved. 10 Dominant Wavelength Bins Table 7. Dominant wavelength bins for LUXEON FlipChip Royal Blue. BIN DOMINANT WAVELENGTH [1] (nm) MINIMUM MAXIMUM 4x 445 450 5x 450 455 6x 455 460 Notes for Table 7: 1. Lumileds maintains a tolerance of ±2nm on dominant wavelength measurements. Forward Voltage Bins Table 8. Forward voltage bin definitions for LUXEON FlipChip Royal Blue. BIN FORWARD VOLTAGE [1] (Vf) MINIMUM MAXIMUM 8 2.8 2.9 9 2.9 3.0 0 3 3.1 Notes for Table 8: 1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements. DS116 LUXEON FlipChip Royal Blue Product Datasheet 20160722 ©2016 Lumileds Holding B.V. All rights reserved. 11 Mechanical Dimensions Figure 9a. Mechanical dimensions for LUXEON FlipChip Royal Blue L0F2-Bxxx050002751. Figure 9b. Mechanical dimensions for LUXEON FlipChip Royal Blue L0F2-Bxxx100005501. Notes for Figures 9a and 9b: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS116 LUXEON FlipChip Royal Blue Product Datasheet 20160722 ©2016 Lumileds Holding B.V. All rights reserved. 12 Reflow Soldering Guidelines tp Tp Critical Zone TL to Tp Ramp-up TL Temperature tL Tsmax Tsmin Ramp-down ts Preheat Area 25 Time 25ºC to Peak JEDEC J-STD-020D Time Figure 10. Visualization of the acceptable reflow temperature profile as specified in Table 9. Table 9. Reflow profile characteristics for LUXEON FlipChip Royal Blue. PROFILE FEATURE LEAD-FREE ASSEMBLY Preheat Minimum Temperature (Tsmin) 150°C Preheat Maximum Temperature (Tsmax) 200°C Preheat Time (tsmin to tsmax) 60 to 120 seconds Ramp-Up Rate (TL to Tp) 3°C / second maximum Liquidus Temperature (TL) 217°C Time Maintained Above Temperature TL (tL) 60 to 150 seconds Peak / Classification Temperature (Tp) 260°C Time Within 5°C of Actual Temperature (tp) 20 to 40 seconds Ramp-Down Rate (Tp to TL) 6°C / second maximum Time 25°C to Peak Temperature 8 minutes maximum JEDEC Moisture Sensitivity Table 10. Moisture sensitivity levels for LUXEON FlipChip Royal Blue. LEVEL 1 FLOOR LIFE SOAK REQUIREMENTS STANDARD TIME CONDITIONS TIME CONDITIONS Unlimited ≤30°C / 85% RH 168 Hours +5 / -0 85°C / 85% RH DS116 LUXEON FlipChip Royal Blue Product Datasheet 20160722 ©2016 Lumileds Holding B.V. All rights reserved. 13 Solder Pad Design 0.20 0.20 0.025 0.70 0.65 Solder mask Stencil Top copper Package center 0.70 Figure 11a. Recommended PCB solder pad layout for L0F2-Bxxx5000xxx1. 0.20 0.30 1.00 Solder mask Stencil Top copper 0.89 Package center 0.32 1.00 Figure 11b. Recommended PCB solder pad layout for L0F2-Bxxx1000xxx1. Notes for Figures 11a and 11b: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS116 LUXEON FlipChip Royal Blue Product Datasheet 20160722 ©2016 Lumileds Holding B.V. All rights reserved. 14 Packaging Information LUXEON FlipChip Royal Blue dies are placed in the center of the blue adhesive tape with a maximum of 40 pieces in the x and y direction with a maximum length of 71mm in both directions. A bin tape label is fixed in the lower left corner. LUXEON FlipChip Royal Blue bin sheets are packaged in ESD green containers with no more than five sheets to a container. [1] Up to 4 ESD green containers are then packaged in a vacuumed ESD protective bag with a silicon gel packet and a summary of the bin sheets. Bin Tape Dimensions Figure 12. Bin Tape dimensions for LUXEON FlipChip Royal Blue. Product Labeling Fig 13. Example of a bin sheet label for LUXEON FlipChip Royal Blue. ESD protective bag (vacuum) Binsheet ESD Green containers ESD Green containers Fig 14. Example of a the packaging for LUXEON FlipChip Royal Blue. Notes for Figures 12, 13 and 14: 1. Drawings are not to scale. 2. All dimensions are in millimeters. 3. Bin sheets of different cat codes are permitted. DS116 LUXEON FlipChip Royal Blue Product Datasheet 20160722 ©2016 Lumileds Holding B.V. All rights reserved. 15 About Lumileds Lumileds is the global leader in light engine technology. The company develops, manufactures and distributes groundbreaking LEDs and automotive lighting products that shatter the status quo and help customers gain and maintain a competitive edge. With a rich history of industry “firsts,” Lumileds is uniquely positioned to deliver lighting advancements well into the future by maintaining an unwavering focus on quality, innovation and reliability. To learn more about our portfolio of light engines, visit lumileds.com. ©2016 Lumileds Holding B.V. All rights reserved. LUXEON is a registered trademark of the Lumileds Holding B.V. in the United States and other countries. lumileds.com DS116 LUXEON FlipChip Royal Blue Product Datasheet 20160722 Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data.