PRODUCT DATA SHEET Part Number: C8024 Revision Level: 04 Date: 1C 22 SBC FMPE OA BS, 2C 18 AWG BC PVC, SIAMESE FR-PVC JKT 05/14/2012 RG 59/U Type Coaxial & 2/C 18 AWG Siamese CCTV - Cable A. CONSTRUCTION A DIAMETERS 1) CONDUCTOR: #22 AWG 7/30 Bare Copper 0.030” nom. 2) 3) B. 1) 2) INSULATION: BRAID SHIELD: CONSTRUCTION B CONDUCTOR: INSULATION: 0.057” Wall Foamed Polyethylene Bare Copper Braid (95% Coverage) 0.144” nom. 0.171” nom. #18 AWG 7/.0152 Bare Copper 0.010” Wall Polyvinyl Chloride 0.046” nom. 0.066” nom. 3) CABLE: 2 conductors (Black, Red) 0.132” nom. C. 1) FINAL CABLE JACKET: 0.032” Wall FR-Polyvinyl Chloride 2) PRINT LEGEND: D. INDUSTRY APPROVALS Major dim: 0.460” +/- 0.024” Minor dim: 0.242” +/- 0.012” CAROL (R) -- C8024 -- RG 59/U TYPE COAX – 1C 22 AWG + 2C 18 AWG CL2 (ETL) OR CM c(ETL)us 75C 3084997 — MADE IN USA (MFG CODE; MM/YY & TRU-MARK SEQ. FT. MKGS) UL Standards 13 National Electric Code Type CL2 (ETL) Article 725 UL & CSA Standards 444 National Electric Code EU 2002/95/EC Type CM c(ETL)us Article 800 RoHS Compliant E. ELECTRICAL PROPERTIES 1) 2) 3) 4) 5) 6) 7) 8) 9) TEMPERATURE: SUGGESTED WORKING VOLTAGE (Vrms): CONDUCTOR D.C. RESISTANCE A: CONDUCTOR D.C. RESISTANCE B: SHIELD RESISTANCE A: MUTUAL CAPACITANCE A: CAPACITANCE B: (Conductor – Conductor) CHARACTERISTIC IMPEDANCE A: Attenuation: -20C to +75C 300V MAX 14.8 Ohms/1000 ft. nom. @ 20 C 6.65 Ohms/1000 ft. nom. @ 20 C 3.00 Ohms/1000 ft. nom. @ 20 C 17 pF/ft. @ 1 kHz nom. 18.0 pF/ft. @ 1kHz nom. 77 Ohms @ 1 MHz nom. FREQ. (MHz) 1 10 50 100 200 500 1000 dB/100 ft. 0.26 0.91 2.09 3.00 4.33 7.03 10.64 Note: Data are subject to change without notice. Contact your Customer Service representative for latest information. Rev. 1: –revise diameter from .146 to .144, shld res from 2.0 to 3.0 , DCR; and correct cond strand from 18 16/30 to 18 7/.0152 , correct cap from 45 to 35 and imp from 43 ohms to 65 ohms and remove cap-ground on B // GT ( February 25, 2010) Rev. 2: remove CATV from print legend - GT – 3/16/2010 Rev. 3: correct cap on (B) from 30 to 18 based on actual test data (17.33) , remove Imp ( B); add drawing , remove jkt color – GT ( 04/21/2010) Rev. 4: revise spec from UL to ETL, Remove AWM GT/ 5/14/12