ON MC100E116FNR2G 5v ecl quint differential line receiver Datasheet

MC10E116, MC100E116
5VECL Quint Differential
Line Receiver
Description
The MC10E/100E116 is a quint differential line receiver with
emitter-follower outputs. For applications which require bandwidths
greater than that of the E116, the E416 device may be of interest.
Active current sources plus a deep collector feature of the MOSAIC
III process provide the receivers with excellent common-mode noise
rejection. Each receiver has a dedicated VCCO supply lead, providing
optimum symmetry and stability.
If both inverting and non-inverting inputs are at an equal potential of
> −2.5 V, the receiver does not go to a defined state, but rather
current-shares in normal differential amplifier fashion, producing
output voltage levels midway between HIGH and LOW, or the device
may even oscillate.
The VBB pin, an internally generated voltage supply, is available to
this device only. For single-ended input conditions, the unused
differential input is connected to VBB as a switching reference voltage.
VBB may also rebias AC coupled inputs. When used, decouple VBB
and VCC via a 0.01 mF capacitor and limit current sourcing or sinking
to 0.5 mA. When not used, VBB should be left open.
The 100 Series contains temperature compensation.
http://onsemi.com
PLCC−28
FN SUFFIX
CASE 776
MARKING DIAGRAM*
1
MCxxxE116G
Features
•
•
•
•
•
•
•
•
•
•
•
•
•
500 ps Max. Propagation Delay
VBB Supply Output
Dedicated VCCO Pin for Each Receiver
PECL Mode Operating Range: VCC = 4.2 V to 5.7 V
with VEE = 0 V
NECL Mode Operating Range: VCC = 0 V
with VEE = −4.2 V to −5.7 V
Output Qs will default low when inputs are < VCC −2.5 V
Internal Input 50 kW Pulldown Resistors
Meets or Exceeds JEDEC Spec EIA/JESD78 IC Latchup Test
ESD Protection: Human Body Model; > 2 kV,
Machine Model; > 200 V
Moisture Sensitivity Level:
Pb = 1
Pb−Free = 3
For Additional Information, see Application Note AND8003/D
Flammability Rating: UL 94 V−0 @ 0.125 in,
Oxygen Index: 28 to 34
Transistor Count = 98 devices
Pb−Free Packages are Available*
AWLYYWW
xxx
A
WL
YY
WW
G
= 10 or 100
= Assembly Location
= Wafer Lot
= Year
= Work Week
= Pb−Free Package
*For additional marking information, refer to
Application Note AND8002/D.
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 7 of this data sheet.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2006
November, 2006 − Rev. 10
1
Publication Order Number:
MC10E116/D
MC10E116, MC100E116
D3
D4
D4
25
24
23
VCCO
Q4
Q4 VCCO
22
21
20
19
D3
26
18
Q3
D2
27
17
Q3
D2
28
16
VCC
15
Q2
Pinout: 28-Lead PLCC
(Top View)
VEE
1
VBB
2
14
Q2
D0
3
13
VCCO
D0
4
12
Q1
5
6
D1
7
D1 VCCO
8
9
Q0
Q0
10
11
VCCO Q1
* All VCC and VCCO pins are tied together on the die.
D0
Q0
D0
Q0
D1
Q1
D1
Q1
D2
Q2
D2
Q2
D3
Q3
D3
Q3
D4
Q4
D4
Q4
VBB
Warning: All VCC, VCCO, and VEE pins must be externally
connected to Power Supply to guarantee proper operation.
Figure 1. Pinout Assignment
Figure 2. Logic Diagram
Table 1. PIN DESCRIPTION
PIN
FUNCTION
D0, D0 − D4, D4
ECL Differential Input Pairs
Q0, Q0 − Q4, Q4
ECL Differential Output Pairs
VBB
Reference Voltage Output.
VCC, VCCO
Positive Supply
VEE
Negative Supply
Table 2. MAXIMUM RATINGS
Symbol
Parameter
Condition 1
Condition 2
Rating
Unit
VCC
PECL Mode Power Supply
VEE = 0 V
8
V
VEE
NECL Mode Power Supply
VCC = 0 V
−6
V
VI
PECL Mode Input Voltage
NECL Mode Input Voltage
VEE = 0 V
VCC = 0 V
6
−6
V
V
Iout
Output Current
Continuous
Surge
50
100
mA
mA
IBB
VBB Sink/Source
± 0.5
mA
TA
Operating Temperature Range
Tstg
Storage Temperature Range
qJA
Thermal Resistance (Junction−to−Ambient)
0 lfpm
500 lfpm
qJC
Thermal Resistance (Junction−to−Case)
Standard Board
Tsol
Wave Solder
Pb
Pb−Free
VI v VCC
VI w VEE
0 to +85
°C
−65 to +150
°C
PLCC−28
PLCC−28
63.5
43.5
°C/W
°C/W
PLCC−28
22 to 26
°C/W
265
265
°C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
http://onsemi.com
2
MC10E116, MC100E116
Table 3. 10E SERIES PECL DC CHARACTERISTICS VCCx = 5.0 V, VEE = 0.0 V (Note 1)
−40°C
Symbol
Min
Characteristic
0°C
Typ
Max
29
35
Min
25°C
Typ
Max
29
35
Min
85°C
Typ
Max
29
35
Min
Typ
Max
Unit
29
35
mA
IEE
Power Supply Current
VOH
Output HIGH Voltage
(Note 2)
3980
4070
4160
4020
4105
4190
4090
4185
4280
mV
VOL
Output LOW Voltage (Note 2)
3050
3210
3370
3050
3210
3370
3050
3227
3405
mV
VIH
Input HIGH Voltage
(Single−Ended)
3830
3995
4160
3870
4030
4190
3940
4110
4280
mV
VIL
Input LOW Voltage
(Single−Ended)
3050
3285
3520
3050
3285
3520
3050
3302
3555
mV
VBB
Output Voltage Reference
3.57
3.7
3.65
3.75
3.69
3.81
V
VIHCMR
Input HIGH Voltage Common
Mode Range (Differential
Configuration) (Note 3)
2.2
4.4
2.2
4.4
2.2
4.4
V
IIH
Input HIGH Current
200
mA
IIL
Input LOW Current
3.57
3.7
200
200
0.5
0.3
200
0.5
0.25
0.3
0.2
mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
1. Input and output parameters vary 1:1 with VCC. VEE can vary −0.46 V / +0.06 V.
2. Outputs are terminated through a 50 W resistor to VCC − 2.0 V.
3. VIHCMR min varies 1:1 with VEE, max varies 1:1 with VCC.
Table 4. 10E SERIES NECL DC CHARACTERISTICS VCCx = 0.0 V; VEE = −5.0 V (Note 4)
−40°C
Symbol
Characteristic
Min
0°C
Typ
Max
29
35
Min
25°C
Typ
Max
29
35
Min
85°C
Typ
Max
29
35
Min
Typ
Max
Unit
29
35
mA
IEE
Power Supply Current
VOH
Output HIGH Voltage
(Note 5)
−1020
−930
−840
−980
−895
−810
−910
−815
−720
mV
VOL
Output LOW Voltage
(Note 5)
−1950
−1790
−1630
−1950
−1790
−1630
−1950
−1773
−1595
mV
VIH
Input HIGH Voltage
(Single−Ended)
−1170
−1005
−840
−1130
−970
−810
−1060
−890
−720
mV
VIL
Input LOW Voltage
(Single−Ended)
−1950
−1715
−1480
−1950
−1715
−1480
−1950
−1698
−1445
mV
VBB
Output Voltage Reference
−1.13
−1.30
−1.35
−1.25
−1.31
−1.19
V
VIHCMR
Input HIGH Voltage
Common Mode Range
(Differential Configuration)
(Note 6)
−2.8
−0.6
−2.8
−0.6
−2.8
−0.6
V
IIH
Input HIGH Current
200
mA
IIL
Input LOW Current
−1.43
−1.3
200
200
0.5
0.3
200
0.5
0.065
0.3
0.2
mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
4. Input and output parameters vary 1:1 with VCC. VEE can vary −0.46 V / +0.06 V.
5. Outputs are terminated through a 50 W resistor to VCC − 2.0 V.
6. VIHCMR min varies 1:1 with VEE, max varies 1:1 with VCC.
http://onsemi.com
3
MC10E116, MC100E116
Table 5. 100E SERIES PECL DC CHARACTERISTICS VCCx = 5.0 V, VEE = 0.0 V (Note 7)
−40°C
Symbol
Characteristic
Min
0°C
Typ
Max
Min
25°C
Typ
Max
29
35
Min
85°C
Typ
Max
29
35
Min
Typ
Max
Unit
29
35
mA
IEE
Power Supply Current
29
35
IEE
Power Supply Current
29
35
29
35
29
35
29
40
mA
VOH
Output HIGH Voltage
(Note 8)
3975
4050
4120
3975
4050
4120
3975
4050
4120
mV
VOL
Output LOW Voltage
(Note 8)
3190
3295
3380
3190
3255
3380
3190
3260
3380
mV
VIH
Input HIGH Voltage
(Single−Ended)
3975
3835
3975
4120
3835
3975
4120
3835
3975
4120
mV
VIL
Input LOW Voltage
(Single−Ended)
3355
3190
3355
3525
3190
3355
3525
3190
3355
3525
mV
VBB
Output Voltage Reference
3.64
3.75
3.62
3.74
3.62
3.74
V
VIHCMR
Input HIGH Voltage Common Mode Range
(Differential Configuration)
(Note 9)
2.2
4.4
2.2
4.4
2.2
4.4
V
IIH
Input HIGH Current
200
mA
IIL
Input LOW Current
3.62
3.74
200
200
0.5
0.3
200
0.5
0.25
0.5
0.2
mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
7. Input and output parameters vary 1:1 with VCC. VEE can vary −0.46 V / +0.8 V.
8. Outputs are terminated through a 50 W resistor to VCC − 2.0 V.
9. VIHCMR min varies 1:1 with VEE, max varies 1:1 with VCC.
http://onsemi.com
4
MC10E116, MC100E116
Table 6. 100E SERIES NECL DC CHARACTERISTICS VCCx = 0.0 V; VEE = −5.0 V (Note 10)
−40°C
Symbol
Characteristic
IEE
Power Supply
Current
VOH
Output HIGH Voltage
(Note 11)
VOL
Output LOW Voltage
(Note 11)
VIH
Input HIGH Voltage
(Single−Ended)
VIL
Input LOW Voltage
(Single−Ended)
VBB
Output Voltage
Reference
VIHCMR
Input HIGH Voltage
Common Mode
Range (Differential
Configuration)
(Note 12)
IIH
Input HIGH Current
IIL
Input LOW Current
Min
−1.38
0°C
Typ
Max
29
35
Typ
Max
29
35
−1025
−950
−880
−1810
−1705
−1025
−1165
−1645
−1810
−1.26
Min
25°C
Typ
Max
29
35
−1025
−950
−880
−1620
−1810
−1745
−1025
−880
−1165
−1645
−1475
−1810
−1.38
−1.25
−2.8
−0.6
200
Min
85°C
Typ
Max
Unit
29
40
mA
−1025
−950
−880
mV
−1620
−1810
−1740
−1620
mV
−1025
−880
−1165
−1025
−880
mV
−1645
−1475
−1810
−1645
−1475
mV
−1.38
−1.26
−1.38
−1.26
V
−2.8
−0.6
−2.8
−0.6
V
200
mA
200
0.5
0.3
Min
200
0.5
0.25
0.5
0.2
mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
10. Input and output parameters vary 1:1 with VCC. VEE can vary −0.46 V / +0.8 V.
11. Outputs are terminated through a 50 W resistor to VCC − 2.0 V.
12. VIHCMR min varies 1:1 with VEE, max varies 1:1 with VCC.
http://onsemi.com
5
MC10E116, MC100E116
Table 7. AC CHARACTERISTICS VCCx= 5.0 V; VEE = 0.0 V or VCCx = 0.0 V; VEE = −5.0 V (Note 13)
−40°C
Symbol
Min
Characteristic
fMAX
Maximum Toggle Frequency
tPLH
tPHL
Propagation Delay to Output
D (Differential Configuration)
D (Single−Ended)
tskew
Within-Device Skew (Note 14)
tskew
Duty Cycle Skew (Note 15)
tJITTER
Random Clock Jitter (RMS)
VPP
Input Voltage Swing
(Differential Configuration)
150
tr/tf
Rise/Fall Time 20−80%
250
Typ
25°C
Max
Min
800
150
150
tPLH − tPHL
300
300
Typ
85°C
Max
Min
800
500
550
200
150
Typ
Max
800
300
300
450
500
200
150
300
300
Unit
MHz
450
500
ps
50
50
50
ps
±10
±10
±10
ps
<1
<1
<1
ps
150
375
625
275
150
375
575
275
mV
375
575
ps
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
13. 10 Series: VEE can vary −0.46 V / +0.06 V.
100 Series: VEE can vary −0.46 V / +0.8 V.
14. Within-device skew is defined as identical transitions on similar paths through a device.
15. Duty cycle skew is defined only for differential operation when the delays are measured from the cross point of the inputs to the cross point
of the outputs.
Q
Zo = 50 W
D
Receiver
Device
Driver
Device
Q
D
Zo = 50 W
50 W
50 W
VTT
VTT = VCC − 2.0 V
Figure 3. Typical Termination for Output Driver and Device Evaluation
(See Application Note AND8020/D − Termination of ECL Logic Devices.)
http://onsemi.com
6
MC10E116, MC100E116
ORDERING INFORMATION
Package
Shipping †
MC10E116FN
PLCC−28
37 Units / Rail
MC10E116FNG
PLCC−28
(Pb−Free)
37 Units / Rail
MC10E116FNR2
PLCC−28
500 / Tape & Reel
MC10E116FNR2G
PLCC−28
(Pb−Free)
500 / Tape & Reel
MC100E116FN
PLCC−28
37 Units / Rail
MC100E116FNG
PLCC−28
(Pb−Free)
37 Units / Rail
MC100E116FNR2
PLCC−28
500 / Tape & Reel
MC100E116FNR2G
PLCC−28
(Pb−Free)
500 / Tape & Reel
Device
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
Resource Reference of Application Notes
AN1405/D
− ECL Clock Distribution Techniques
AN1406/D
− Designing with PECL (ECL at +5.0 V)
AN1503/D
− ECLinPSt I/O SPiCE Modeling Kit
AN1504/D
− Metastability and the ECLinPS Family
AN1568/D
− Interfacing Between LVDS and ECL
AN1672/D
− The ECL Translator Guide
AND8001/D
− Odd Number Counters Design
AND8002/D
− Marking and Date Codes
AND8020/D
− Termination of ECL Logic Devices
AND8066/D
− Interfacing with ECLinPS
AND8090/D
− AC Characteristics of ECL Devices
http://onsemi.com
7
MC10E116, MC100E116
PACKAGE DIMENSIONS
PLCC−28
FN SUFFIX
PLASTIC PLCC PACKAGE
CASE 776−02
ISSUE E
−N−
0.007 (0.180)
B
Y BRK
T L−M
M
0.007 (0.180)
U
M
N
S
T L−M
S
S
N
S
D
Z
−M−
−L−
W
28
D
X
V
1
A
0.007 (0.180)
R
0.007 (0.180)
C
M
M
T L−M
T L−M
S
S
N
S
N
S
0.007 (0.180)
H
N
S
S
G
J
0.004 (0.100)
−T− SEATING
T L−M
S
N
T L−M
S
N
S
K
PLANE
F
VIEW S
G1
M
K1
E
S
T L−M
S
VIEW D−D
Z
0.010 (0.250)
0.010 (0.250)
G1
VIEW S
S
NOTES:
1. DATUMS −L−, −M−, AND −N− DETERMINED
WHERE TOP OF LEAD SHOULDER EXITS
PLASTIC BODY AT MOLD PARTING LINE.
2. DIMENSION G1, TRUE POSITION TO BE
MEASURED AT DATUM −T−, SEATING PLANE.
3. DIMENSIONS R AND U DO NOT INCLUDE
MOLD FLASH. ALLOWABLE MOLD FLASH IS
0.010 (0.250) PER SIDE.
4. DIMENSIONING AND TOLERANCING PER
ANSI Y14.5M, 1982.
5. CONTROLLING DIMENSION: INCH.
6. THE PACKAGE TOP MAY BE SMALLER THAN
THE PACKAGE BOTTOM BY UP TO 0.012
(0.300). DIMENSIONS R AND U ARE
DETERMINED AT THE OUTERMOST
EXTREMES OF THE PLASTIC BODY
EXCLUSIVE OF MOLD FLASH, TIE BAR
BURRS, GATE BURRS AND INTERLEAD
FLASH, BUT INCLUDING ANY MISMATCH
BETWEEN THE TOP AND BOTTOM OF THE
PLASTIC BODY.
7. DIMENSION H DOES NOT INCLUDE DAMBAR
PROTRUSION OR INTRUSION. THE DAMBAR
PROTRUSION(S) SHALL NOT CAUSE THE H
DIMENSION TO BE GREATER THAN 0.037
(0.940). THE DAMBAR INTRUSION(S) SHALL
NOT CAUSE THE H DIMENSION TO BE
SMALLER THAN 0.025 (0.635).
DIM
A
B
C
E
F
G
H
J
K
R
U
V
W
X
Y
Z
G1
K1
INCHES
MIN
MAX
0.485
0.495
0.485
0.495
0.165
0.180
0.090
0.110
0.013
0.019
0.050 BSC
0.026
0.032
0.020
−−−
0.025
−−−
0.450
0.456
0.450
0.456
0.042
0.048
0.042
0.048
0.042
0.056
−−− 0.020
2_
10_
0.410
0.430
0.040
−−−
http://onsemi.com
8
MILLIMETERS
MIN
MAX
12.32
12.57
12.32
12.57
4.20
4.57
2.29
2.79
0.33
0.48
1.27 BSC
0.66
0.81
0.51
−−−
0.64
−−−
11.43
11.58
11.43
11.58
1.07
1.21
1.07
1.21
1.07
1.42
−−−
0.50
2_
10_
10.42
10.92
1.02
−−−
0.007 (0.180)
M
T L−M
S
N
S
MC10E116, MC100E116
ECLinPS is a trademark of Semiconductor Components Industries, LLC (SCILLC).
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5773−3850
http://onsemi.com
9
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
MC10E116/D
Similar pages