Not for New Design - End of Life - Last Available Purchase Date is 31-May-2011 BYS459-1500S, BYS459F-1500S & BYS459B-1500S Vishay General Semiconductor High Voltage Damper Diodes TO-220AC FEATURES ITO-220AC • Glass passivated chip junction • Fast reverse recovery time • Low switching loss, high efficiency • Low forward voltage drop 2 2 1 1 BYS459-1500S BYS459F-1500S PIN 1 PIN 1 • Meets MSL level 1, per J-STD-020, LF maximum peak of 245 °C (for TO-263AB package) • Solder dip 260 °C, 40 s (for TO-220AC and ITO-220AC package) CASE PIN 2 • High forward surge capability PIN 2 TO-263AB K • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC 2 TYPICAL APPLICATIONS 1 BYS459B-1500S PIN 1 PIN 2 K HEATSINK For use in high voltage and high frequency rectification of switching mode inverters, converters, freewheeling and ideal for CRT horizontal deflection application. MECHANICAL DATA PRIMARY CHARACTERISTICS IF(AV) 10 A VRRM 1500 V IFSM 130 A trr 220 ns tfr 300 ns VF 1.25 V TJ max. 150 °C Case: TO-220AC, ITO-220AC, TO-263AB Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL VALUE UNIT Maximum repetitive peak reverse voltage VRRM 1500 V Maximum working reverse voltage VRWM 1300 V VDC 1500 V IF(AV) 10 A IF(Peak) 10 A Maximum DC blocking voltage Maximum average forward rectified current (Fig. 1) Peak working forward current at f = 82 kHz Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Operating junction and storage temperature range Isolation voltage (ITO-220AC only) from terminal to heatsink t = 1 min Document Number: 88551 Revision: 14-Jan-11 IFSM 130 A TJ, TSTG - 55 to + 150 °C VAC 1500 V For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 1 Not for New Design - End of Life - Last Available Purchase Date is 31-May-2011 BYS459-1500S, BYS459F-1500S & BYS459B-1500S Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TJ = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS SYMBOL VALUE UNIT Maximum instantaneous forward voltage (1) IF = 6.5 A, IF = 6.5 A, TJ = 25 °C TJ = 125 °C VF 1.35 1.25 V Maximum DC reverse current VRWM TJ = 25 °C TJ = 125 °C IR 250 1.0 µA mA Maximum reverse recovery time IF = 1.0 A, dI/dt = 50 A/µs, VR = 30 V trr 220 ns Maximum reverse recovery charge IF = 2.0 A, dI/dt = 20 A/µs, VR = 30 V Qrr 0.95 µC Maximum forward recovery time IF = 6.5 A, dI/dt = 52 A/µs, VR = 5 V Peak forward recovery overshoot voltage IF = 6.5 A, dI/dt = 52 A/µs tfr 300 ns VFP 27 V Note: (1) Pulse test: 300µs pulse width, 1 % duty cycle THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL BYS459 BYS459F BYS459B UNIT RJC 2.0 4.0 2.0 °C/W Typical thermal resistance from junction to case ORDERING INFORMATION (Example) PACKAGE PREFERRED P/N UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE TO-220AC BYS459-1500S-E3/45 1.80 45 50/tube Tube ITO-220AC BYS459F-1500S-E3/45 1.95 45 50/tube Tube TO-263AB BYS459B-1500S-E3/45 1.77 45 50/tube Tube TO-263AB BYS459B-1500S-E3/81 1.77 81 800/reel Tape and reel RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 140 BYS459-1500S BYS459B-1500S 10 Peak Forward Surge Current (A) Average Forward Current (A) 12 8 BYS459F-1500S 6 4 2 120 100 80 60 40 20 0 0 25 50 75 100 125 150 175 1 10 100 Case Temperature (°C) Number of Cycles at 60 Hz Figure 1. Forward Current Derating Curve Figure 2. Maximum Non-Repetitive Peak Forward Surge Current www.vishay.com 2 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88551 Revision: 14-Jan-11 Not for New Design - End of Life - Last Available Purchase Date is 31-May-2011 BYS459-1500S, BYS459F-1500S & BYS459B-1500S Vishay General Semiconductor 1000 TJ = 125 °C Junction Capacitance (pF) Instantaneous Forward Current (A) 100 10 TJ = 25 °C 1 0.1 0 0.5 1.0 1.5 2.0 10 1 0.1 2.5 10 1 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Forward Voltage Figure 5. Typical Capacitance 450 1000 400 TJ = 125 °C 100 TJ = 100 °C 10 1 0.1 TJ = 25 °C Reverse Recovery Time (ns) Instantaneous Reverse Current (µA) 100 350 dI/dt = 50 A/µs 300 250 200 dI/dt = 100 A/µs 150 100 50 0 0.01 0 200 400 600 800 1000 1200 1400 1600 0 2 4 6 8 10 12 Reverse Voltage (V) Forward Current (A) Figure 4. Typical Reverse Current Figure 6. Typical Reverse Recovery Time Document Number: 88551 Revision: 14-Jan-11 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 Not for New Design - End of Life - Last Available Purchase Date is 31-May-2011 BYS459-1500S, BYS459F-1500S & BYS459B-1500S Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) ITO-220AC TO-220AC 0.404 (10.26) 0.384 (9.75) 0.415 (10.54) MAX. 0.370 (9.40) 0.360 (9.14) 0.154 (3.91) DIA. 0.148 (3.74) DIA. 0.113 (2.87) 0.103 (2.62) 0.145 (3.68) 0.135 (3.43) 1 PIN 2 0.560 (14.22) 0.530 (13.46) 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.035 (0.89) 0.025 (0.64) 0.025 (0.64) 0.015 (0.38) 0.022 (0.56) 0.014 (0.36) 0.205 (5.20) 0.195 (4.95) 7° REF. 0.191 (4.85) 0.171 (4.35) CASE 0.037 (0.94) 0.027 (0.68) 7° REF. 2 1 0.560 (14.22) 0.530 (13.46) PIN 1 0.135 (3.43) DIA. 0.122 (3.08) DIA. 0.350 (8.89) 0.330 (8.38) 0.110 (2.79) 0.100 (2.54) PIN 2 0.105 (2.67) 0.095 (2.41) 0.671 (17.04) 0.651 (16.54) PIN 1.148 (29.16) 1.118 (28.40) 0.160 (4.06) 0.140 (3.56) 0.057 (1.45) 0.045 (1.14) 0.140 (3.56) DIA. 0.125 (3.17) DIA. 0.600 (15.24) 0.580 (14.73) 0.603 (15.32) 0.573 (14.55) 0.350 (8.89) 0.330 (8.38) 7° REF. 0.076 (1.93) REF. 45° REF. 0.635 (16.13) 0.625 (15.87) 0.190 (4.83) 0.170 (4.32) 0.110 (2.79) 0.100 (2.54) 0.076 (1.93) REF. 0.185 (4.70) 0.175 (4.44) 0.055 (1.39) 0.045 (1.14) 0.028 (0.71) 0.020 (0.51) 0.205 (5.21) 0.195 (4.95) TO-263AB 0.411 (10.45) 0.380 (9.65) 0.190 (4.83) 0.160 (4.06) 0.245 (6.22) MIN. 0.055 (1.40) 0.045 (1.14) Mounting Pad Layout 0.42 (10.66) MIN. K 0.360 (9.14) 0.320 (8.13) 1 K 2 0.624 (15.85) 0.591 (15.00) 0 to 0.01 (0 to 0.254) 0.110 (2.79) 0.090 (2.29) 0.021 (0.53) 0.014 (0.36) 0.037 (0.940) 0.027 (0.686) 0.105 (2.67) 0.095 (2.41) www.vishay.com 4 0.055 (1.40) 0.047 (1.19) 0.205 (5.20) 0.195 (4.95) 0.140 (3.56) 0.110 (2.79) 0.33 (8.38) MIN. 0.670 (17.02) 0.591 (15.00) 0.15 (3.81) MIN. 0.08 (2.032) MIN. 0.105 (2.67) 0.095 (2.41) For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88551 Revision: 14-Jan-11 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1