Micropac JANTX4N22A Jan, jantx, jantxv, single channel optocoupler Datasheet

4N22A
4N23A
4N24A
OPTOELECTRONIC PRODUCTS
DIVISION
Features:
Applications:
•
•
•
•
•
•
•
•
•
•
•
Mii
JAN, JANTX, JANTXV, SINGLE CHANNEL OPTOCOUPLERS
Collector is electrically isolated from the case.
Overall current gain...1.5 typical (4N24A)
Base lead provided for conventional transistor
biasing
Rugged package
High gain, high voltage transistor
+1kV electrical isolation
Eliminate ground loops
Level shifting
Line receiver
Switching power supplies
Motor control
DESCRIPTION
Gallium Aluminum Arsenide (GaAlAs) infrared LED and a high gain N-P-N silicon phototransistor packaged in a hermetically
sealed metal case. The 4N22A, 4N23A and 4N24A can be tested to customer specifications, as well as to MIL-PRF-19500
JAN, JANS, JANTX, and JANTXV quality levels.
*ABSOLUTE MAXIMUM RATINGS
Input to Output Voltage............................................................................................................................................................. ±1kV
Emitter-Collector Voltage..............................................................................................................................................................4V
Collector-Emitter Voltage............................................................................................................................................................35V
Collector-Base Voltage ...............................................................................................................................................................35V
Reverse Input Voltage .................................................................................................................................................................2V
Input Diode Continuous Forward Current at (or below) 65°C Free-Air Temperature (see note 1) ....................................... 40mA
Peak Forward Input Current (Value applies for tw < 1µs, PRR < 300 pps) .................................................................................1A
Continuous Collector Current ................................................................................................................................................. 50mA
Continuous Transistor Power Dissipation at (or below) 25°C Free-Air Temperature (see Note 2) ................................... 300mW
Storage Temperature............................................................................................................................................. -65°C to +125°C
Operating Free-Air Temperature Range ............................................................................................................... -55°C to +125°C
Lead Solder Temperature (1/16” (1.6mm) from case for 10 seconds) ..................................................................................240°C
Notes:
1. Derate linearly to 125°C free-air temperature at the rate of 0.67 mA/°C above 65°C.
2. Derate linearly to 125°C free-air temperature at the rate of 5 mW/°C.
Package Dimensions
* JEDEC registered data
Schematic Diagram
0.040 [1.02]
MAX.
0.305 [7.75]
0.335 [8.51]
C
6 LEADS
0.016Ø [0.41]
0.019Ø [0.48]
0.500 [12.70]
MIN.
0.155 [3.94]
0.185 [4.70]
5
0.022Ø [5.08]
3
0.045 [1.14]
0.029 [0.73]
6
7
2
1
5
3
A
E
1
45°
0.034 [0.864]
0.028 [0.711]
TO5
7
K
NOTE: ALL LINEAR DIMENSIONS ARE IN INCHES (MILLIMETERS)
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918
www.micropac.com E-MAIL: [email protected]
3 - 10
B
2
4N22A, 4N23A, and 4N24A
JAN, JANTX, JANTXV, SINGLE CHANNEL OPTOCOUPLERS
*ELECTRICAL CHARACTERISTICS INPUT LED
TA = 25°C Unless otherwise specified
PARAMETER
SYMBOL
MIN MAX UNITS
Input Diode Static Reverse Current
Input Diode Static Forward Voltage
IR
-55°C
+25°C
+125°C
VF
µA
VR = 2V
1.5
1.3
1.2
V
IF = 10mA
MAX
1
0.8
0.7
*OUTPUT TRANSISTOR TA = 25°C Unless otherwise specified
PARAMETER
SYMBOL
MIN
TEST CONDITIONS
100
UNITS
TEST CONDITIONS
Collector-Base Breakdown Voltage
V(BR)CBO
35
V
IC = 100µA, IB = 0, IF = 0
Collector-Emitter Breakdown Voltage
V(BR)CEO
35
V
IC = 1mA, IB = 0, IF = 0
Emitter-Base Breakdown Voltage
V(BR)EBO
4
V
IC = 0, IE = 100µA, IF = 0
*COUPLED CHARACTERISTICS
PARAMETER
SYMBOL
MIN
UNITS
TEST CONDITIONS
mA
VCE = 5V, IB = 0, IF = 2mA
IC(ON)
0.15
0.2
0.4
4N22A
4N23A
4N24A
2.5
6
10
mA
IC(ON)
On State Collector Current
-55°C
4N22A
4N23A
4N24A
1
2.5
4
mA
IC(ON)
On State Collector Current
+100°C
4N22A
4N23A
4N24A
1
2.5
4
mA
IC(ON)
On State Collector Current
NOTE
TA = 25°C Unless otherwise specified
4N22A
4N23A
4N24A
On State Collector Current
NOTE
MAX
NOTE
VCE = 5V, IB = 0, IF = 10mA
VCE = 5V, IB = 0, IF = 10mA
VCE = 5V, IB = 0, IF = 10mA
Off State Collector Current
+25°C
IC(OFF)
100
nA
Off State Collector Current
+100°C
IC(OFF)
100
µA
VCE = 20V, IB = 0, IF = 0mA
VCE(SAT)
VCE(SAT)
VCE(SAT)
0.3
0.3
0.3
V
V
V
IC = 2.5mA, IB = 0, IF = 20mA
IC = 5mA, IB = 0, IF = 20mA
IC = 10mA, IB = 0, IF = 20mA
VIN-OUT = 1kV
1
F = 1MHz, VIN-OUT = 1kV
1
Collector-Emitter Saturation Voltage
4N22A
4N23A
4N24A
11
Input to Output Resistance
RI-O
Input to Output Capacitance
CI-O
5
pF
4N22A
4N23A
4N24A
tr
tr
tr
15
15
20
µs
4N22A
4N23A
4N24A
tf
tf
tf
15
15
20
Rise Time
Fall Time
10
µs
VCE = 20V, IB = 0, IF = 0mA
VCC = 10V, IF = 10mA, RL = 100Ω
µs
µs
µs
VCC =10V, IF = 10mA, RL = 100Ω
µs
NOTES:
1. These parameters are measured between all phototransistor leads shorted together and with both input diode leads shorted together.
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918
www.micropac.com E-MAIL: [email protected]
3 - 11
4N22A, 4N23A, and 4N24A
JAN, JANTX, JANTXV, SINGLE CHANNEL OPTOCOUPLERS
RECOMMENDED OPERATING CONDITIONS:
PARAMETER
SYMBOL
MIN
MAX
Input Current, Low Level
IFL
0
100
µA
Input Current, High Level
IFH
2
10
mA
VCE
5
10
V
Supply Voltage
UNITS
SELECTION GUIDE
PART NUMBER
JAN4N22A
JAN4N23A
JAN4N24A
JANTX4N22A
JANTX4N23A
JANTX4N24A
JANTXV4N22A
JANTXV4N23A
JANTXV4N24A
PART DESCRIPTION
4N22A Optocoupler, JAN Screening level
4N23A Optocoupler, JAN Screening level
4N24A Optocoupler, JAN Screening level
4N22A Optocoupler, JANTX Screening level
4N23A Optocoupler, JANTX Screening level
4N24A Optocoupler, JANTX Screening level
4N22A Optocoupler, JANTXV Screening level
4N23A Optocoupler, JANTXV Screening level
4N24A Optocoupler, JANTXV Screening level
* JEDEC registered data
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918
www.micropac.com E-MAIL: [email protected]
3 - 12
Similar pages