TI LM339AN Quad differential comparator Datasheet

LM139,, LM139A,, LM239,, LM239A
LM339, LM339A, LM2901, LM2901AV, LM2901V
QUAD DIFFERENTIAL COMPARATORS
•
•
•
•
•
•
•
•
Single Supply or Dual Supplies
Wide Range of Supply Voltage:
– Max Rating . . . 2 V to 36 V
– Tested to 30 V . . . Non-V Devices
– Tested to 32 V . . . V-Suffix Devices
Low Supply-Current Drain Independent of
Supply Voltage . . . 0.8 mA Typ
Low Input Bias Current . . . 25 nA Typ
Low Input Offset Current . . . 3 nA Typ (LM139)
Low Input Offset Voltage . . . 2 mV Typ
Common-Mode Input Voltage Range Includes
Ground
Differential Input Voltage Range Equal to
Maximum-Rated Supply Voltage . . . ±36 V
Low Output Saturation Voltage
Output Compatible With TTL, MOS, and CMOS
DESCRIPTION/ORDERING
INFORMATION
These devices consist of four independent voltage
comparators that are designed to operate from a
single power supply over a wide range of voltages.
Operation from dual supplies also is possible, as
long as the difference between the two supplies is
2 V to 36 V, and VCC is at least 1.5 V more positive
than the input common-mode voltage. Current drain
is independent of the supply voltage. The outputs
can be connected to other open-collector outputs to
achieve wired-AND relationships.
LM139, LM139A . . . D, J, OR W PACKAGE
LM239 . . . D, N, OR PW PACKAGE
LM239A . . . D PACKAGE
LM339, LM339A . . . D, DB, N, NS, OR PW PACKAGE
LM2901 . . . D, N, NS, OR PW PACKAGE
(TOP VIEW)
1OUT
2OUT
VCC
2IN−
2IN+
1IN−
1IN+
1
14
2
13
3
12
4
11
5
10
6
7
9
8
OUT3
OUT4
GND
4IN+
4IN−
3IN+
3IN−
LM139, LM139A . . . FK PACKAGE
(TOP VIEW)
2OUT
1OUT
NC
3OUT
4OUT
FEATURES
•
•
SLCS006N – OCTOBER 1979 – REVISED NOVEMBER 2006
VCC
NC
2IN−
NC
2IN+
3
4
5
6
7
8
2 1 20 19
18
17
16
15
14
9 10 11 12 13
GND
NC
4IN+
NC
4IN−
1IN−
1IN+
NC
3IN−
3IN+
www.ti.com
NC − No internal connection
The LM139 and LM139A are characterized for operation over the full military temperature range of –55°C to
125°C. The LM239 and LM239A are characterized for operation from –25°C to 125°C. The LM339 and LM339A
are characterized for operation from 0°C to 70°C. The LM2901, LM2901AV, and LM2901V are characterized for
operation from –40°C to 125°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 1979–2006, Texas Instruments Incorporated
On products compliant to MIL-PRF-38535, all parameters are
tested unless otherwise noted. On all other products, production
processing does not necessarily include testing of all parameters.
LM139,, LM139A,, LM239,, LM239A
LM339, LM339A, LM2901, LM2901AV, LM2901V
QUAD DIFFERENTIAL COMPARATORS
www.ti.com
SLCS006N – OCTOBER 1979 – REVISED NOVEMBER 2006
ORDERING INFORMATION
TA
VIOmax
AT 25°C
PACKAGE (1)
MAX VCC
PDIP – N
30 V
LM339N
Tube of 50
LM339D
Reel of 2500
LM339DR
SOP – NS
Reel of 2000
LM339NSR
LM339
SSOP – DB
Reel of 2000
LM339DBR
LM339
Tube of 90
LM339PW
Reel of 2000
LM339PWR
Tube of 25
LM339AN
Tube of 50
LM339AD
Reel of 2500
LM339ADR
SOP – NS
Reel of 2000
LM339ANSR
LM339A
SSOP – DB
Reel of 2000
LM339ADBR
L339A
Tube of 90
LM339APW
Reel of 2000
LM339APWR
Tube of 25
LM239N
Tube of 50
LM239D
Reel of 2500
LM239DR
Tube of 90
LM239PW
Reel of 2000
LM239PWR
Tube of 50
LM239AD
Reel of 2500
LM239ADR
Tube of 25
LM2901N
Tube of 50
LM2901D
Reel of 2500
LM2901DR
Reel of 2000
LM2901NSR
Tube of 90
LM2901PW
Reel of 2000
LM2901PWR
SOIC – D
Reel of 2500
LM2901VQDR
L2901V
TSSOP – PW
Reel of 2000
LM2901VQPWR
L2901V
SOIC – D
Reel of 2500
LM2901AVQDR
L2901AV
TSSOP – PW
Reel of 2000
LM2901AVQPWR
L2901AV
CFP – W
Tube of 25
LM139W
LM139W
CDIP – J
Tube of 25
LM139J
LM139J
LCCC – FK
Tube of 55
LM139FK
LM139FK
Tube of 50
LM139D
Reel of 2500
LM139DR
CFP – W
Tube of 25
LM139AW
LM139AW
CDIP – J
Tube of 25
LM139AJ
LM139AJ
LCCC – FK
Tube of 55
LM139AFK
LM139AFK
Tube of 50
LM139AD
Reel of 2500
LM139ADR
TSSOP – PW
0°C to 70°C
PDIP – N
SOIC – D
2 mV
30 V
TSSOP – PW
PDIP – N
5 mV
30 V
–25°C to 85°C
SOIC – D
TSSOP – PW
2 mV
30 V
SOIC – D
PDIP – N
SOIC – D
7 mV
30 V
–40°C to 125°C
SOP – NS
TSSOP – PW
7 mV
2 mV
5 mV
32 V
32 V
30 V
SOIC – D
–55°C to 125°C
2 mV
30 V
SOIC – D
(1)
2
TOP-SIDE
MARKING
Tube of 25
SOIC – D
5 mV
ORDERABLE
PART NUMBER
LM339N
LM339
L339
LM339AN
LM339A
L339A
LM239N
LM239
L239
LM239A
LM2901N
LM2901
LM2901
L2901
LM139D
LM139AD
Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
Submit Documentation Feedback
LM139,, LM139A,, LM239,, LM239A
LM339, LM339A, LM2901, LM2901AV, LM2901V
QUAD DIFFERENTIAL COMPARATORS
www.ti.com
SLCS006N – OCTOBER 1979 – REVISED NOVEMBER 2006
SYMBOL (EACH COMPARATOR)
IN+
OUT
IN−
SCHEMATIC (EACH COMPARATOR)
VCC
80-µA
Current
Regulator
10 µA
60 µA
10 µA
80 µA
IN+
OUT
IN−
GND
All current values shown are nominal.
Submit Documentation Feedback
3
LM139,, LM139A,, LM239,, LM239A
LM339, LM339A, LM2901, LM2901AV, LM2901V
QUAD DIFFERENTIAL COMPARATORS
www.ti.com
SLCS006N – OCTOBER 1979 – REVISED NOVEMBER 2006
Absolute Maximum Ratings (1)
over operating free-air temperature range (unless otherwise noted)
MIN
MAX
Supply voltage (2)
VID
Differential input voltage (3)
VI
Input voltage range (either input)
VO
Output voltage
36
V
IO
Output current
20
mA
–0.3
36
V
±36
V
36
V
Duration of output short circuit to ground (4)
θJA
θJC
TJ
Tstg
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
4
UNIT
VCC
Package thermal
Unlimited
impedance (5) (6)
Package thermal impedance (7) (8)
D package
86
DB package
96
N package
80
NS package
76
PW package
113
FK package
5.61
J package
15.05
W package
14.65
Operating virtual junction temperature
°C/W
°C/W
150
°C
Case temperature for 60 s
FK package
260
°C
Lead temperature 1,6 mm (1/16 in) from case for 60 s
J package
300
°C
150
°C
Storage temperature range
–65
Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
All voltage values, except differential voltages, are with respect to network ground.
Differential voltages are at IN+ with respect to IN–.
Short circuits from outputs to VCC can cause excessive heating and eventual destruction.
Maximum power dissipation is a function of TJ (max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient
temperature is PD = (TJ (max) – TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability.
The package thermal impedance is calculated in accordance with JESD 51-7.
Maximum power dissipation is a function of TJ (max), θJC, and TC. The maximum allowable power dissipation at any allowable case
temperature is PD = (TJ (max) – TC)/θJC. Operating at the absolute maximum TJ of 150°C can affect reliability.
The package thermal impedance is calculated in accordance with MIL-STD-883.
Submit Documentation Feedback
LM139,, LM139A,, LM239,, LM239A
LM339, LM339A, LM2901, LM2901AV, LM2901V
QUAD DIFFERENTIAL COMPARATORS
www.ti.com
SLCS006N – OCTOBER 1979 – REVISED NOVEMBER 2006
Electrical Characteristics
at specified free-air temperature, VCC = 5 V (unless otherwise noted)
TEST CONDITIONS (1)
PARAMETER
VIO
Input offset voltage
VCC = 5 V to 30 V,
VIC = VICR min,
VO = 1.4 V
IIO
Input offset current
VO = 1.4 V
IIB
Input bias current
VO = 1.4 V
VICR
Common-mode
input-voltage range
MIN
LM139A
TYP MAX
25°C
2
Full range
3
Full range
25°C
Full range
Large-signal
differential-voltage
amplification
VCC+ = ±7.5 V,
VO = –5 V to 5 V
IOH
High-level output current
VID = 1 V
–300
0 to
VCC – 1.5
0 to
VCC – 1.5
0 to
VCC – 2
0 to
VCC – 2
0.1
VOH = 30 V
Full range
Low-level output current
VID = –1 V,
VOL = 1.5 V
25°C
ICC
Supply current
(four comparators)
VO = 2.5 V,
No load
25°C
50
150
Full range
16
0.1
nA
150
0.8
2
400
700
6
nA
V/mV
700
6
nA
200
1
400
mV
V
1
25°C
IOL
25
–25 –100
25°C
IOL = 4 mA
3
–300
VOH = 5 V
VID = –1 V,
4
25
UNIT
2
–25 –100
200
Low-level output voltage
1
100
25°C
VOL
5
TYP MAX
100
Full range
25°C
MIN
9
25°C
AVD
(1)
(2)
LM139
TA (2)
16
0.8
µA
mV
mA
2
mA
All characteristics are measured with zero common-mode input voltage, unless otherwise specified.
Full range (MIN to MAX) for LM139 and LM139A is –55°C to 125°C. All characteristics are measured with zero common-mode input
voltage, unless otherwise specified.
Switching Characteristics
VCC = 5 V, TA = 25°C
PARAMETER
TEST CONDITIONS
LM139
LM139A
UNIT
TYP
Response time
(1)
(2)
RL connected to 5 V through 5.1 kΩ,
CL = 15 pF (1) (2)
100-mV input step with 5-mV overdrive
1.3
TTL-level input step
0.3
µs
CL includes probe and jig capacitance.
The response time specified is the interval between the input step function and the instant when the output crosses 1.4 V.
Submit Documentation Feedback
5
LM139,, LM139A,, LM239,, LM239A
LM339, LM339A, LM2901, LM2901AV, LM2901V
QUAD DIFFERENTIAL COMPARATORS
www.ti.com
SLCS006N – OCTOBER 1979 – REVISED NOVEMBER 2006
Electrical Characteristics
at specified free-air temperature, VCC = 5 V (unless otherwise noted)
TEST CONDITIONS (1)
PARAMETER
LM239
LM339
TA (2)
MIN
VIO
Input offset voltage
VCC = 5 V to 30 V,
VIC = VICR min,
VO = 1.4 V
IIO
Input offset current
VO = 1.4 V
IIB
Input bias current
VO = 1.4 V
VICR
Common-mode
input-voltage range
TYP MAX
25°C
2
Full range
5
Full range
25°C
VCC = 15 V,
VO = 1.4 V to 11.4 V,
RL ≥ 15 kΩ to VCC
IOH
High-level output current
VID = 1 V
VOL
Low-level output voltage
VID = –1 V,
IOL = 4 mA
IOL
Low-level output current
VID = –1 V,
VOL = 1.5 V
25°C
ICC
Supply current
(four comparators)
VO = 2.5 V,
No load
25°C
25°C
VOH = 30 V
Full range
3
4
50
5
–25 –250
–25 –250
–400
–400
0 to
VCC – 2
0 to
VCC – 2
50
50
150
0 to
VCC – 1.5
25°C
VOH = 5 V
1
0 to
VCC – 1.5
Full range
Large-signal
differential-voltage
amplification
5
UNIT
TYP MAX
150
Full range
25°C
MIN
9
25°C
AVD
(1)
(2)
LM239A
LM339A
200
0.1
50
50
25°C
150
200
0.1
400
150
700
6
16
0.8
2
nA
V/mV
50
nA
1
µA
400
700
6
nA
V
1
Full range
mV
16
0.8
mV
mA
2
mA
All characteristics are measured with zero common-mode input voltage, unless otherwise specified.
Full range (MIN to MAX) for LM239/LM239A is –25°C to 85°C, and for LM339/LM339A is 0°C to 70°C. All characteristics are measured
with zero common-mode input voltage, unless otherwise specified.
Switching Characteristics
VCC = 5 V, TA = 25°C
PARAMETER
TEST CONDITIONS
LM239
LM239A
LM339
LM339A
UNIT
TYP
Response time
(1)
(2)
6
RL connected to 5 V through 5.1 kΩ,
CL = 15 pF (1) (2)
100-mV input step with 5-mV overdrive
1.3
TTL-level input step
0.3
CL includes probe and jig capacitance.
The response time specified is the interval between the input step function and the instant when the output crosses 1.4 V.
Submit Documentation Feedback
µs
LM139,, LM139A,, LM239,, LM239A
LM339, LM339A, LM2901, LM2901AV, LM2901V
QUAD DIFFERENTIAL COMPARATORS
www.ti.com
SLCS006N – OCTOBER 1979 – REVISED NOVEMBER 2006
Electrical Characteristics
at specified free-air temperature, VCC = 5 V (unless otherwise noted)
TEST CONDITIONS (1)
PARAMETER
VIO
Input offset voltage
Non-A devices
VIC = VICR min,
VO = 1.4 V,
VCC = 5 V to MAX (3)
IIO
Input offset current
VO = 1.4 V
IIB
Input bias current
VO = 1.4 V
VICR
Common-mode
input-voltage range
TA (2)
A-suffix devices
25°C
2
7
1
2
Full range
25°C
5
50
200
25°C
–25
Full range
25°C
Full range
IOH
High-level output current
VID = 1 V
Low-level output voltage
VID = –1 V,
IOL = 4 mA
V-suffix devices
All devices
Full range
25°C
25°C
VOH = 5 V
VOH = VCC MAX (3)
Non-V devices
IOL
Low-level output current
VID = –1 V,
VOL = 1.5 V
ICC
Supply current
(four comparators)
VO = 2.5 V,
No load
VCC = 5 V
VCC = MAX (3)
UNIT
mV
4
Full range
VCC = 15 V, VO = 1.4 V to 11.4 V,
RL ≥ 15 kΩ to VCC
(3)
MAX
15
25°C
Large-signal
differential-voltage
amplification
(1)
(2)
TYP
Full range
AVD
VOL
LM2901
MIN
–250
–500
0 to
VCC – 1.5
25°C
100
V/mV
0.1
50
nA
1
µA
Full range
25°C
nA
V
0 to
VCC – 2
25
nA
150
500
150
400
mV
700
6
25°C
16
mA
0.8
2
1
2.5
mA
All characteristics are measured with zero common-mode input voltage, unless otherwise specified.
Full range (MIN to MAX) for LM2901 is –40°C to 125°C. All characteristics are measured with zero common-mode input voltage, unless
otherwise specified.
VCC MAX = 30 V for non-V devices, and 32 V for V-suffix devices
Switching Characteristics
VCC = 5 V, TA = 25°C
PARAMETER
Response time
(1)
(2)
TEST CONDITIONS
RL connected to 5 V through 5.1 kΩ,
CL = 15 pF (1) (2)
LM2901
TYP
100-mV input step with 5-mV overdrive
1.3
TTL-level input step
0.3
UNIT
µs
CL includes probe and jig capacitance.
The response time specified is the interval between the input step function and the instant when the output crosses 1.4 V.
Submit Documentation Feedback
7
LM139,, LM139A,, LM239,, LM239A
LM339, LM339A, LM2901, LM2901AV, LM2901V
QUAD DIFFERENTIAL COMPARATORS
www.ti.com
SLCS006N – OCTOBER 1979 – REVISED NOVEMBER 2006
TYPICAL CHARACTERISTICS
SUPPLY CURRENT
vs
SUPPLY VOLTAGE
INPUT BIAS CURRENT
vs
SUPPLY VOLTAGE
80
1.8
1.6
IIN – Input Bias Current – nA
1.4
ICC – Supply Current – mA
70
TA = –55°C
TA = 25°C
TA = 0°C
1.2
1
TA = 70°C
0.8
TA = 125°C
0.6
0.4
TA = –55°C
60
TA = 0°C
50
TA = 25°C
40
TA = 70°C
30
TA = 125°C
20
10
0.2
0
0
0
5
10
15
20
25
30
35
0
5
VCC – Supply Voltage – V
10
10
VO – Saturation Voltage – V
20
25
VCC – Supply Voltage – V
OUTPUT SATURATION VOLTAGE
1
TA = 125°C
TA = 25°C
0.1
TA = –55°C
0.01
0.001
0.01
0.1
1
10
IO – Output Sink Current – mA
8
15
Submit Documentation Feedback
100
30
35
LM139,, LM139A,, LM239,, LM239A
LM339, LM339A, LM2901, LM2901AV, LM2901V
QUAD DIFFERENTIAL COMPARATORS
www.ti.com
SLCS006N – OCTOBER 1979 – REVISED NOVEMBER 2006
TYPICAL CHARACTERISTICS (continued)
RESPONSE TIME FOR VARIOUS OVERDRIVES
NEGATIVE TRANSITION
RESPONSE TIME FOR VARIOUS OVERDRIVES
POSITIVE TRANSITION
6
6
5
5
VO – Output Voltage – V
VO – Output Voltage – V
Overdrive = 5 mV
4
Overdrive = 20 mV
3
Overdrive = 100 mV
2
1
0
-1
-0.3
Overdrive = 5 mV
4
Overdrive = 20 mV
3
Overdrive = 100 mV
2
1
0
0
0.25 0.5 0.75
1
1.25 1.5 1.75
2
2.25
-1
-0.3
t – Time – µs
0
0.25 0.5 0.75
1
1.25 1.5 1.75
2
2.25
t – Time – µs
Submit Documentation Feedback
9
PACKAGE OPTION ADDENDUM
www.ti.com
9-Oct-2007
PACKAGING INFORMATION
Orderable Device
Status (1)
5962-7700801VCA
ACTIVE
CDIP
J
14
1
TBD
5962-87739012A
ACTIVE
LCCC
FK
20
1
TBD
5962-8773901CA
ACTIVE
CDIP
J
14
1
TBD
A42 SNPB
N / A for Pkg Type
5962-8773901DA
ACTIVE
CFP
W
14
1
TBD
A42 SNPB
N / A for Pkg Type
77008012A
ACTIVE
LCCC
FK
20
1
TBD
7700801CA
ACTIVE
CDIP
J
14
1
TBD
A42 SNPB
N / A for Pkg Type
7700801DA
ACTIVE
CFP
W
14
1
TBD
A42 SNPB
N / A for Pkg Type
JM38510/11201BCA
ACTIVE
CDIP
J
14
1
TBD
A42 SNPB
N / A for Pkg Type
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
Lead/Ball Finish
A42 SNPB
MSL Peak Temp (3)
N / A for Pkg Type
POST-PLATE N / A for Pkg Type
POST-PLATE N / A for Pkg Type
LM139AD
ACTIVE
SOIC
D
14
50
TBD
CU NIPDAU
Level-3-245C-168 HR
LM139ADG4
ACTIVE
SOIC
D
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM139ADR
ACTIVE
SOIC
D
14
2500
Pb-Free
(RoHS)
CU NIPDAU
Level-2-250C-1 YEAR/
Level-1-235C-UNLIM
LM139ADRG4
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM139AFKB
ACTIVE
LCCC
FK
20
1
TBD
LM139AJ
ACTIVE
CDIP
J
14
1
TBD
A42 SNPB
N / A for Pkg Type
LM139AJB
ACTIVE
CDIP
J
14
1
TBD
A42 SNPB
N / A for Pkg Type
POST-PLATE N / A for Pkg Type
LM139AN
OBSOLETE
PDIP
N
14
TBD
Call TI
LM139AW
ACTIVE
CFP
W
14
1
TBD
A42 SNPB
Call TI
N / A for Pkg Type
LM139AWB
ACTIVE
CFP
W
14
1
TBD
A42 SNPB
N / A for Pkg Type
LM139D
ACTIVE
SOIC
D
14
50
TBD
CU NIPDAU
Level-1-220C-UNLIM
LM139DG4
ACTIVE
SOIC
D
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM139DR
ACTIVE
SOIC
D
14
2500
TBD
CU NIPDAU
Level-1-220C-UNLIM
LM139DRG4
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM139FK
ACTIVE
LCCC
FK
20
1
TBD
POST-PLATE N / A for Pkg Type
LM139FKB
ACTIVE
LCCC
FK
20
1
TBD
POST-PLATE N / A for Pkg Type
LM139J
ACTIVE
CDIP
J
14
1
TBD
A42 SNPB
N / A for Pkg Type
LM139JB
ACTIVE
CDIP
J
14
1
TBD
A42 SNPB
N / A for Pkg Type
LM139N
OBSOLETE
PDIP
N
14
TBD
Call TI
LM139W
ACTIVE
CFP
W
14
1
TBD
A42 SNPB
N / A for Pkg Type
LM139WB
ACTIVE
CFP
W
14
1
TBD
A42 SNPB
N / A for Pkg Type
LM239AD
ACTIVE
SOIC
D
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM239ADE4
ACTIVE
SOIC
D
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM239ADG4
ACTIVE
SOIC
D
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM239ADR
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM239ADRE4
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM239ADRG4
ACTIVE
SOIC
D
14
2500 Green (RoHS &
CU NIPDAU
Level-1-260C-UNLIM
Addendum-Page 1
Call TI
PACKAGE OPTION ADDENDUM
www.ti.com
9-Oct-2007
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
LM239AN
OBSOLETE
PDIP
N
14
LM239D
ACTIVE
SOIC
D
14
LM239DE4
ACTIVE
SOIC
D
LM239DG4
ACTIVE
SOIC
LM239DR
ACTIVE
LM239DRE4
Lead/Ball Finish
MSL Peak Temp (3)
no Sb/Br)
TBD
Call TI
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
D
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM239DRG4
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM239N
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
LM239NE4
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
LM239PW
ACTIVE
TSSOP
PW
14
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM239PWE4
ACTIVE
TSSOP
PW
14
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM239PWG4
ACTIVE
TSSOP
PW
14
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM239PWR
ACTIVE
TSSOP
PW
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM239PWRE4
ACTIVE
TSSOP
PW
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM239PWRG4
ACTIVE
TSSOP
PW
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM2901AVQDR
NRND
SOIC
D
14
2500
CU NIPDAU
Level-2-250C-1 YEAR/
Level-1-235C-UNLIM
LM2901AVQDRG4
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
CU NIPDAU
Level-1-250C-UNLIM
CU NIPDAU
Level-1-260C-UNLIM
Pb-Free
(RoHS)
LM2901AVQPWR
ACTIVE
TSSOP
PW
14
2000
LM2901AVQPWRG4
ACTIVE
TSSOP
PW
14
2000 Green (RoHS &
no Sb/Br)
LM2901D
ACTIVE
SOIC
D
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM2901DE4
ACTIVE
SOIC
D
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM2901DG4
ACTIVE
SOIC
D
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM2901DR
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM2901DRE4
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM2901DRG4
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM2901N
ACTIVE
PDIP
N
14
CU NIPDAU
N / A for Pkg Type
25
Addendum-Page 2
TBD
Call TI
Pb-Free
(RoHS)
PACKAGE OPTION ADDENDUM
www.ti.com
9-Oct-2007
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
LM2901NE4
ACTIVE
PDIP
N
14
LM2901NSR
ACTIVE
SO
NS
14
LM2901NSRE4
ACTIVE
SO
NS
LM2901NSRG4
ACTIVE
SO
LM2901PW
ACTIVE
LM2901PWE4
25
Pb-Free
(RoHS)
Lead/Ball Finish
MSL Peak Temp (3)
CU NIPDAU
N / A for Pkg Type
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
NS
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TSSOP
PW
14
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
ACTIVE
TSSOP
PW
14
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM2901PWG4
ACTIVE
TSSOP
PW
14
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM2901PWLE
OBSOLETE
TSSOP
PW
14
LM2901PWR
ACTIVE
TSSOP
PW
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM2901PWRE4
ACTIVE
TSSOP
PW
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM2901PWRG4
ACTIVE
TSSOP
PW
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM2901QD
OBSOLETE
SOIC
D
14
TBD
Call TI
Call TI
LM2901QN
OBSOLETE
PDIP
N
14
TBD
Call TI
Call TI
LM2901VQDR
NRND
SOIC
D
14
2500
Pb-Free
(RoHS)
CU NIPDAU
Level-2-250C-1 YEAR/
Level-1-235C-UNLIM
LM2901VQDRG4
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
CU NIPDAU
Level-1-250C-UNLIM
CU NIPDAU
Level-1-260C-UNLIM
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TBD
Call TI
LM2901VQPWR
ACTIVE
TSSOP
PW
14
2000
LM2901VQPWRG4
ACTIVE
TSSOP
PW
14
2000 Green (RoHS &
no Sb/Br)
LM339AD
ACTIVE
SOIC
D
14
LM339ADBR
ACTIVE
SSOP
DB
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM339ADBRG4
ACTIVE
SSOP
DB
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM339ADE4
ACTIVE
SOIC
D
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM339ADG4
ACTIVE
SOIC
D
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM339ADR
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM339ADRE4
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM339ADRG4
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM339AN
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
LM339ANE4
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
LM339ANSR
ACTIVE
SO
NS
14
CU NIPDAU
Level-1-260C-UNLIM
50
TBD
Call TI
2000 Green (RoHS &
Addendum-Page 3
PACKAGE OPTION ADDENDUM
www.ti.com
9-Oct-2007
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
LM339ANSRG4
ACTIVE
SO
NS
14
LM339APW
ACTIVE
TSSOP
PW
14
90
LM339APWE4
ACTIVE
TSSOP
PW
14
LM339APWG4
ACTIVE
TSSOP
PW
14
LM339APWR
ACTIVE
TSSOP
PW
LM339APWRE4
ACTIVE
TSSOP
LM339APWRG4
ACTIVE
LM339D
Lead/Ball Finish
MSL Peak Temp (3)
no Sb/Br)
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
PW
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TSSOP
PW
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
ACTIVE
SOIC
D
14
CU NIPDAU
Level-1-260C-UNLIM
LM339DBLE
OBSOLETE
SSOP
DB
14
LM339DBR
ACTIVE
SSOP
DB
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM339DBRE4
ACTIVE
SSOP
DB
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM339DBRG4
ACTIVE
SSOP
DB
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM339DE4
ACTIVE
SOIC
D
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM339DG4
ACTIVE
SOIC
D
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM339DR
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM339DRE4
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM339DRG4
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM339N
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
LM339NE4
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
LM339NSLE
OBSOLETE
SO
NS
14
LM339NSR
ACTIVE
SO
NS
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM339NSRG4
ACTIVE
SO
NS
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM339PW
ACTIVE
TSSOP
PW
14
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM339PWE4
ACTIVE
TSSOP
PW
14
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM339PWG4
ACTIVE
TSSOP
PW
14
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM339PWLE
OBSOLETE
TSSOP
PW
14
LM339PWR
ACTIVE
TSSOP
PW
14
50
Green (RoHS &
no Sb/Br)
TBD
TBD
TBD
2000 Green (RoHS &
Addendum-Page 4
Call TI
Call TI
Call TI
CU NIPDAU
Call TI
Call TI
Call TI
Level-1-260C-UNLIM
PACKAGE OPTION ADDENDUM
www.ti.com
9-Oct-2007
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
LM339PWRE4
ACTIVE
TSSOP
PW
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM339PWRG4
ACTIVE
TSSOP
PW
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM339Y
OBSOLETE
Lead/Ball Finish
MSL Peak Temp (3)
no Sb/Br)
0
TBD
Call TI
Call TI
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 5
PACKAGE MATERIALS INFORMATION
www.ti.com
4-Oct-2007
TAPE AND REEL BOX INFORMATION
Device
Package Pins
Site
Reel
Diameter
(mm)
Reel
Width
(mm)
A0 (mm)
B0 (mm)
K0 (mm)
P1
(mm)
W
Pin1
(mm) Quadrant
LM239ADR
D
14
SITE 27
330
16
6.5
9.0
2.1
8
16
Q1
LM239ADR
D
14
SITE 41
330
16
6.5
9.0
2.1
8
16
Q1
LM239DR
D
14
SITE 27
330
16
6.5
9.0
2.1
8
16
Q1
LM239DR
D
14
SITE 41
330
16
6.5
9.0
2.1
8
16
Q1
LM239PWR
PW
14
SITE 41
330
12
7.0
5.6
1.6
8
12
Q1
LM2901DR
D
14
SITE 27
330
16
6.5
9.0
2.1
8
16
Q1
LM2901DR
D
14
SITE 41
330
16
6.5
9.0
2.1
8
16
Q1
LM2901NSR
NS
14
SITE 41
330
16
8.2
10.5
2.5
12
16
Q1
LM2901PWR
PW
14
SITE 41
330
12
7.0
5.6
1.6
8
12
Q1
LM339ADBR
DB
14
SITE 41
330
16
8.2
6.6
2.5
12
16
Q1
LM339ADR
D
14
SITE 27
330
16
6.5
9.0
2.1
8
16
Q1
LM339ADR
D
14
SITE 41
330
16
6.5
9.0
2.1
8
16
Q1
LM339ANSR
NS
14
SITE 41
330
16
8.2
10.5
2.5
12
16
Q1
LM339APWR
PW
14
SITE 41
330
12
7.0
5.6
1.6
8
12
Q1
LM339DBR
DB
14
SITE 41
330
16
8.2
6.6
2.5
12
16
Q1
LM339DR
D
14
SITE 27
330
16
6.5
9.0
2.1
8
16
Q1
LM339DR
D
14
SITE 41
330
16
6.5
9.0
2.1
8
16
Q1
LM339NSR
NS
14
SITE 41
330
16
8.2
10.5
2.5
12
16
Q1
LM339PWR
PW
14
SITE 41
330
12
7.0
5.6
1.6
8
12
Q1
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
4-Oct-2007
Device
Package
Pins
Site
Length (mm)
Width (mm)
Height (mm)
LM239ADR
D
14
SITE 27
342.9
336.6
28.58
LM239ADR
D
14
SITE 41
346.0
346.0
33.0
LM239DR
D
14
SITE 27
342.9
336.6
28.58
LM239DR
D
14
SITE 41
346.0
346.0
33.0
LM239PWR
PW
14
SITE 41
346.0
346.0
29.0
LM2901DR
D
14
SITE 27
342.9
336.6
28.58
LM2901DR
D
14
SITE 41
346.0
346.0
33.0
LM2901NSR
NS
14
SITE 41
346.0
346.0
33.0
LM2901PWR
PW
14
SITE 41
346.0
346.0
29.0
LM339ADBR
DB
14
SITE 41
346.0
346.0
33.0
LM339ADR
D
14
SITE 27
342.9
336.6
28.58
LM339ADR
D
14
SITE 41
346.0
346.0
33.0
LM339ANSR
NS
14
SITE 41
346.0
346.0
33.0
LM339APWR
PW
14
SITE 41
346.0
346.0
29.0
LM339DBR
DB
14
SITE 41
346.0
346.0
33.0
LM339DR
D
14
SITE 27
342.9
336.6
28.58
LM339DR
D
14
SITE 41
346.0
346.0
33.0
LM339NSR
NS
14
SITE 41
346.0
346.0
33.0
LM339PWR
PW
14
SITE 41
346.0
346.0
29.0
Pack Materials-Page 2
MECHANICAL DATA
MLCC006B – OCTOBER 1996
FK (S-CQCC-N**)
LEADLESS CERAMIC CHIP CARRIER
28 TERMINAL SHOWN
18
17
16
15
14
13
NO. OF
TERMINALS
**
12
19
11
20
10
A
B
MIN
MAX
MIN
MAX
20
0.342
(8,69)
0.358
(9,09)
0.307
(7,80)
0.358
(9,09)
28
0.442
(11,23)
0.458
(11,63)
0.406
(10,31)
0.458
(11,63)
21
9
22
8
44
0.640
(16,26)
0.660
(16,76)
0.495
(12,58)
0.560
(14,22)
23
7
52
0.739
(18,78)
0.761
(19,32)
0.495
(12,58)
0.560
(14,22)
24
6
68
0.938
(23,83)
0.962
(24,43)
0.850
(21,6)
0.858
(21,8)
84
1.141
(28,99)
1.165
(29,59)
1.047
(26,6)
1.063
(27,0)
B SQ
A SQ
25
5
26
27
28
1
2
3
4
0.080 (2,03)
0.064 (1,63)
0.020 (0,51)
0.010 (0,25)
0.020 (0,51)
0.010 (0,25)
0.055 (1,40)
0.045 (1,14)
0.045 (1,14)
0.035 (0,89)
0.045 (1,14)
0.035 (0,89)
0.028 (0,71)
0.022 (0,54)
0.050 (1,27)
4040140 / D 10/96
NOTES: A.
B.
C.
D.
E.
All linear dimensions are in inches (millimeters).
This drawing is subject to change without notice.
This package can be hermetically sealed with a metal lid.
The terminals are gold plated.
Falls within JEDEC MS-004
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
MECHANICAL DATA
MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001
DB (R-PDSO-G**)
PLASTIC SMALL-OUTLINE
28 PINS SHOWN
0,38
0,22
0,65
28
0,15 M
15
0,25
0,09
8,20
7,40
5,60
5,00
Gage Plane
1
14
0,25
A
0°–ā8°
0,95
0,55
Seating Plane
2,00 MAX
0,10
0,05 MIN
PINS **
14
16
20
24
28
30
38
A MAX
6,50
6,50
7,50
8,50
10,50
10,50
12,90
A MIN
5,90
5,90
6,90
7,90
9,90
9,90
12,30
DIM
4040065 /E 12/01
NOTES: A.
B.
C.
D.
All linear dimensions are in millimeters.
This drawing is subject to change without notice.
Body dimensions do not include mold flash or protrusion not to exceed 0,15.
Falls within JEDEC MO-150
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
MECHANICAL DATA
MTSS001C – JANUARY 1995 – REVISED FEBRUARY 1999
PW (R-PDSO-G**)
PLASTIC SMALL-OUTLINE PACKAGE
14 PINS SHOWN
0,30
0,19
0,65
14
0,10 M
8
0,15 NOM
4,50
4,30
6,60
6,20
Gage Plane
0,25
1
7
0°– 8°
A
0,75
0,50
Seating Plane
0,15
0,05
1,20 MAX
PINS **
0,10
8
14
16
20
24
28
A MAX
3,10
5,10
5,10
6,60
7,90
9,80
A MIN
2,90
4,90
4,90
6,40
7,70
9,60
DIM
4040064/F 01/97
NOTES: A.
B.
C.
D.
All linear dimensions are in millimeters.
This drawing is subject to change without notice.
Body dimensions do not include mold flash or protrusion not to exceed 0,15.
Falls within JEDEC MO-153
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements,
improvements, and other changes to its products and services at any time and to discontinue any product or service without notice.
Customers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s
standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this
warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily
performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should
provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask
work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services
are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such
products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under
the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is
accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an
unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties
may be subject to additional restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service
voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business
practice. TI is not responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would
reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement
specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications
of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related
requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any
applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its
representatives against any damages arising out of the use of TI products in such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is
solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in
connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products
are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any
non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Applications
Amplifiers
amplifier.ti.com
Audio
www.ti.com/audio
Data Converters
dataconverter.ti.com
Automotive
www.ti.com/automotive
DSP
dsp.ti.com
Broadband
www.ti.com/broadband
Interface
interface.ti.com
Digital Control
www.ti.com/digitalcontrol
Logic
logic.ti.com
Military
www.ti.com/military
Power Mgmt
power.ti.com
Optical Networking
www.ti.com/opticalnetwork
Microcontrollers
microcontroller.ti.com
Security
www.ti.com/security
RFID
www.ti-rfid.com
Telephony
www.ti.com/telephony
Low Power
Wireless
www.ti.com/lpw
Video & Imaging
www.ti.com/video
Wireless
www.ti.com/wireless
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2007, Texas Instruments Incorporated
Similar pages