1-Watt Cup Series Flush Mount and Surface Mount Packages OVTL01LGA Series • • • • • Robust energy-efficient design with long operating life Low thermal resistance (2° C/W) Exceptional spatial uniformity Optional optics to suit application Available in amber, blue, green, red, cool white, daylight white, and warm white Product Photo Here The OVTL01LGAx Series offers an energy-efficient packaged LED source providing high luminance, low thermal resistance, a water-clear lens, and a long operating lifespan. Devices have a 135° typical viewing angle with optional optics available and two mounting options: 1. Flush Mount—The shallow-gullwing package is designed to be countersunk into a hole or cavity in the PC board for a low profile of only 1.12mm. 2. Surface Mount—The deep-gullwing package is easily mounted on the solid surface of the PC board (Part numbers end in “S”) Applications • Automotive exterior and interior lighting • Architectural lighting • Electronic signs and signals OVTL01LGAA Amber Typical Luminous Flux (lm) 38 OVTL01LGAB Blue 15 5 Flush Mount OVTL01LGAG Green 52 16 Flush Mount OVTL01LGAR Red 53 8.5 Flush Mount OVTL01LGAW Cool White 50 14 Flush Mount OVTL01LGAWD Daylight White 45 12.5 Flush Mount Warm White* 30 11 Flush Mount Amber 38 12.5 Surface Mount OVTL01LGABS Blue 15 5 Surface Mount OVTL01LGAGS Green 52 16 Surface Mount OVTL01LGARS Red 53 8.5 Surface Mount OVTL01LGAWS Cool White 50 14 Surface Mount OVTL01LGAWDS Daylight White 45 12.5 Surface Mount OVTL01LGAWWS Warm White* 30 11 Surface Mount Part Number OVTL01LGAWW OVTL01LGAAS Viewing Angle Emitted Color 135° Typical On-Axis Intensity (cd) 12.5 Flush Mount Package 3 *Preliminary data only RoHS Moisture DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue B.2 01/07 Page 1 of 10 1-Watt Cup Series OVTL01LGA Series Package Drawing: A A SIDE VIEW—FLUSH MOUNT ONLY Dimensions are in millimeters. FLUSH MOUNT ANODE SURFACE MOUNT VIEW A—A FLUSH MOUNT Recommended Solder Pattern SURFACE MOUNT Recommended Solder Pattern CATHODE R1.50 0.90 2.20 2.90 1. 2. 3. Recommend .006 [.015] thick stencil. Cross-hatching represents solder paste positioning Dimensions are in inches [mm] 2.90 ANODE OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B.2 01/07 Page 2 of 10 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com 1-Watt Cup Series OVTL01LGA Series Absolute Maximum Ratings DC Forward Current 0.35 A Peak Pulsed Forward Current 1 1A Reverse Voltage 5V Maximum Allowable Junction Temperature 2 130° C Storage and Operating Temperature -50° ~ +85 ° C Notes: 1. Pulse width 1 ms maximum. Duty cycle 1/16. 2. Thermal Resistance junction to Board (Tjb) is 2° C/W Electrical Characteristics (IF = 350 mA, TJ = 25° C) SYMBOL PARAMETER MIN TYP MAX UNITS Forward Voltage (Amber) 1.9 2.3 2.6 V Forward Voltage (Blue) 2.9 3.4 3.7 V Forward Voltage (Green) 3.2 3.6 4.0 V 2.3 2.6 V Forward Voltage (Red) 1.9 Forward Voltage (White) 2.9 3.4 3.7 V VF—Temperature Co-efficient (Amber & Red) ---- -6.0 ---- mV/°C VF—Temperature Co-efficient (White & Blue) ---- -4.8 ---- mV/°C VF—Temperature Co-efficient (Green) ---- -5.0 ---- mV/°C VF Optical Characteristics (IF = 350 mA, TJ = 25° C) DOMINANT WAVELENGTH COLOR SPECTRAL FULL-WIDTH HALF-MAXIMUM DOMINANT WAVELENGTH TEMPERATURE DEPENDENCE MIN TYP MAX Amber 590 595 600 16 nm 0.08 nm/° C Blue 455 460 465 24 nm 0.05 nm/° C Green 510 515 520 40 nm 0.04 nm/° C Red 620 625 630 18 nm 0.05 nm/° C White N/A N/A N/A N/A N/A TYPICAL LUMINOUS FLUX (lm) TYPICAL ON-AXIS INTENSITY (cd) OPTEK PART NUMBER COLOR OVTL01LGAA(S) Amber 38 32 26 12.5 10 9 OVTL01LGAB(S) Blue 15 14 13 5 4.7 4.2 OVTL01LGAG(S) Green 52 49 44 16 15 12 OVTL01LGAR(S) Red 53 48 40 8.5 7.6 6.4 OVTL01LGAW(S) White 50 46 41 14 13 11 OVTL01LGAWD(S) Daylight White 45 42 37 12.5 11 10 OVTL09LGAWW(S) Warm White 30 28 24 11 10 9 @ TJ = 25° C @ TJ = 50° C @ TJ = 75° C @ TJ = 25° C @ TJ = 50° C @ TJ = 75° C OPTEK’s Lednium Series Solid State Lighting products package the highest quality LED chips. Typically, the lumen output of these can be as high as 70% after 50,000 hours of operation. This prediction is based on specific test results and on tests on similar materials, and relies on strict observation of the design limits and ratings included in this data sheet. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue B.2 01/07 Page 3 of 10 1-Watt Cup Series OVTL01LGA Series Standard Bins Lamps are sorted to luminous flux (Φ) and forward voltage (VF) bins shown. Orders may be filled with any or all bins contained as below. OVTL01LGAA and OVTL01LGAAS (AMBER) (IF = 350 mA) Luminous flux (lm)) Dominant Wavelength 590-600nm V1 55 V2 B 38 A 21 2.3 1.9 2.6 Forward Voltage (VF) OVTL01LGAB and OVTL01LGABS (BLUE) (IF = 350 mA) Luminous flux (lm)) Dominant Wavelength 455-465nm V1 20 V2 B 15 A 10 2.9 3.4 3.7 Forward Voltage (VF) OVTL01LGAG and OVTL01LGAGS (GREEN) (IF = 350 mA) Luminous flux (lm)) Dominant Wavelength 510-520nm V1 64 V2 B 52 A 40 3.2 3.6 4.0 Forward Voltage (VF) Important Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. To designate forward voltage and luminous flux ranks, please contact OPTEK. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B.2 01/07 Page 4 of 10 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com 1-Watt Cup Series OVTL01LGA Series Standard Bins Lamps are sorted to luminous flux (Φ) and forward voltage (VF) bins shown. Orders may be filled with any or all bins contained as below. OVTL01LGAR and OVTL01LGARS (RED) (IF = 350 mA) Luminous flux (lm)) Dominant Wavelength 620-630nm V1 61 V2 B 53 A 40 1.9 2.3 2.6 Forward Voltage (VF) OVTL01LGAW and OVTL01LGAWS (COOL WHITE) (IF = 350 mA) Luminous flux (lm)) Typical CCT 7000°K V1 60 V2 D 55 C 50 B 45 40 A 2.9 3.4 3.7 Forward Voltage (VF) OVTL01LGAWD and OVTL01LGAWDS (DAYLIGHT WHITE) (IF = 350 mA) Luminous flux (lm)) Typical CCT 5800°K V1 53 V2 D 49 C 45 B 41 A 37 2.9 3.4 3.7 Forward Voltage (VF) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue B.2 01/07 Page 5 of 10 1-Watt Cup Series OVTL01LGA Series Standard Bins Lamps are sorted to luminous flux (Φ) and forward voltage (VF) bins shown. Orders may be filled with any or all bins contained as below. OVTL01LGAWW and OVTL01LGAWWS (WARM WHITE) (IF = 350 mA) Luminous flux (lm)) Typical CCT 3500°K V1 36 V2 D 33 C 30 B 27 24 A 2.9 3.7 3.3 Forward Voltage (VF) White Bin Structure 0.450 0.430 0.410 0.390 0.370 0.350 0.330 0.310 0.290 0.270 0.250 0.280 WW WD W 0.330 Color Bin Color W Cool White 0.380 0.430 Minimum Maximum CCT (°K) CCT (°K) 6400 7600 WD Daylight White 5200 6400 WW Warm White 3200 3800 0.480 Chromaticity Coordinates Cx .298 .306 .313 .317 Cy .314 .288 .34 .307 Cx .313 .318 .334 .338 Cy .341 .300 .326 .382 Cx .395 .395 .435 .435 Cy .372 .390 .426 .443 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B.2 01/07 Page 6 of 10 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com 1-Watt Cup Series OVTL01LGA Series CIE Chromaticity Diagram Spatial Intensity Distribution -1.0 -.8 -.6 -.4 -.2 0 .2 .4 .6 .8 1.0 137.7 degrees Normalized Spectral Intensity vs Angular Displacement OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue B.2 01/07 Page 7 of 10 1-Watt Cup Series OVTL01LGA Series Typical Electro-Optical Characteristics Curves Input Current = 350 mA, TJ = 25° C 1.0 Normalized Spectral Intensity Normalized Spectral Intensity Input Current = 350 mA, TJ = 25° C 0.8 0.6 0.4 0.2 0.0 380 430 480 530 580 630 680 730 ——Daylight White 780 Wavelength (nm) Wavelength Characteristics Wavelength Characteristics Input Current = 350 mA, TJ = 25° C Input Current = 350 mA, TJ = 25° C 1.0 Normalized Spectral Intensity 1.0 ——Warm White ——Cool White 0.8 0.8 0.6 0.6 0.4 0.4 0.2 0.2 0.0 0.0 200 300 400 500 600 700 200 780 300 400 500 600 700 780 Wavelength (nm) Wavelength Characteristics Wavelength Characteristics Luminosity normalized to TJ = 25° C Luminosity normalized to TJ = 25° C 0 25 50 75 100 125 OVTLO1LGAA(S) 125 100 85 70 60 45 OVTLO1LGAB(S) 107 100 95 87 75 65 OVTLO1LGAG(S) 110 100 95 85 70 65 OVTLO1LGAR(S) 135 100 90 75 65 50 OVTLO1LGAW(S) 105 100 93 82 68 60 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 OVTLO1LGAWD(S) 105 100 93 82 68 60 0.0 OVTLO1LGAWW(S) 105 100 93 82 68 60 % Normalized Luminosity at Junction Temperature (° C) Junction Temperature Characteristics Normalized Luminosity OPTEK Part Number - 0 20 40 60 80 100 120 140 160 Junction Temperature °C Junction Temperature Characteristics OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B.2 01/07 Page 8 of 10 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com 1-Watt Cup Series OVTL01LGA Series Typical Electro-Optical Characteristics Curves 500 Current (I F) 400 Amber Red Green 300 200 Blue/White 100 0 1.7 2.2 2.7 3.2 3.7 Voltage (V F) Forward Current vs. Forward Voltage OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue B.2 01/07 Page 9 of 10 1-Watt Cup Series OVTL01LGA Series Reel Dimensions: Outer diameter: 13 inches [330 mm] Spindle diameter: 0.5 inches [13 mm] Cover tape thickness 0.10mm max Progressive Direction Empty Pockets With Tape (Minimum 50) Loaded Pockets Empty Pockets With Tape (Minimum 60) Empty Pockets With Unsealed Cover Tape (5-10) Carrier Tape Dimensions: Loaded quantity 1000 maximum pieces per reel .5 Ø1 5.5±0.1 2.85 5.7±0.1 12.0±0.1 2.0 0.30±0.05 1.6±0.1 .1 +0 0 0- 4.0±0.1 2.0±0.1 12.0±0.1 6.4±0.1 Moisture Resistant Packaging Label Aluminum Moisture-proof Bag Desiccant Bar Code Label OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B.2 01/07 Page 10 of 10 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com