BZX384-G-Series www.vishay.com Vishay Semiconductors Small Signal Zener Diodes FEATURES • Silicon planar Zener diodes • The Zener voltages are graded according to the international E24 standard • Standard Zener voltage tolerance is ± 5 %; replace “C” with “B” for ± 2 % tolerance • AEC-Q101 qualified available (part number on request) • ESD capability according to AEC-Q101: Human body model > 8 kV Machine model > 800 V PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT VZ range nom. 2.4 to 75 V Test current IZT 2; 5 mA VZ specification Pulse current Int. construction Single • Base P/N-G3 - green, commercial grade • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 ORDERING INFORMATION DEVICE NAME ORDERING CODE TAPED UNITS PER REEL MINIMUM ORDER QUANTITY 3000 (8 mm tape on 7" reel) 15 000/box 10 000 (8 mm tape on 13" reel) 10 000/box BZX384C2V4-G3-08 to BZX384C75-G3-08 BZX384B2V4-G3-08 to BZX384B75-G3-08 BZX384-G-series BZX384C2V4-G3-18 to BZX384C75-G3-18 BZX384B2V4-G3-18 to BZX384B75-G3-18 PACKAGE PACKAGE NAME SOD-323 WEIGHT MOLDING COMPOUND FLAMMABILITY RATING MOISTURE SENSITIVITY LEVEL SOLDERING CONDITIONS 4 mg UL 94 V-0 MSL level 1 (according J-STD-020) 260 °C/10 s at terminals ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT Device on fiberglass substrate Ptot 200 mW Valid that electrodes are kept at ambient temperature RthJA 650 K/W Tj 150 °C Storage temperature range Tstg -65 to +150 °C Operating temperature range Tstg -55 to +150 °C Power dissipation Thermal resistance junction to ambient air Junction temperature Rev. 1.6, 14-Oct-16 Document Number: 83335 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BZX384-G-Series www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) ZENER VOLTAGE RANGE PART NUMBER MARKING CODE VZ at IZT1 IZT1 V MIN. REVERSE LEAKAGE CURRENT TEST CURRENT IZT2 mA IR at VR μA NOM. MAX. DYNAMIC RESISTANCE ZZ at IZT1 VZ at IZT1 V MAX. ZZK at IZT2 TEMPERATURE COEFFICIENT OF ZENER VOLTAGE 10-4/°C TYP. TYP. MIN. MAX. BZX384C2V4-G Y1 2.2 2.4 2.6 5 1 50 1 70 ( 100) 275 -9 -4 BZX384C2V7-G Y2 2.5 2.7 2.9 5 1 20 1 75 ( 100) 300 600) -9 -4 BZX384C3V0-G Y3 2.8 3.0 3.2 5 1 10 1 80 ( 95) 325 ( 600) -9 -3 BZX384C3V3-G Y4 3.1 3.3 3.5 5 1 5 1 85 ( 95) 350 ( 600) -8 -3 BZX384C3V6-G Y5 3.4 3.6 3.8 5 1 5 1 85 ( 90) 375 ( 600) -8 -3 BZX384C3V9-G Y6 3.7 3.9 4.1 5 1 3 1 85 ( 90) 400 ( 600) -7 -3 BZX384C4V3-G Y7 4 4.3 4.6 5 1 3 1 80 ( 90) 410 ( 600) -6 -1 BZX384C4V7-G Y8 4.4 4.7 5 5 1 3 2 50 ( 80) 425 ( 500) -5 2 BZX384C5V1-G Y9 4.8 5.1 5.4 5 1 2 2 40 ( 60) 400 ( 480) -3 4 BZX384C5V6-G YA 5.2 5.6 6 5 1 1 2 15 ( 40) 80 ( 400) -2 6 BZX384C6V2-G YB 5.8 6.2 6.6 5 1 3 4 6 ( 10) 40 ( 150) -1 7 BZX384C6V8-G YC 6.4 6.8 7.2 5 1 2 4 6 ( 15) 30 ( 80) 2 7 BZX384C7V5-G YD 7 7.5 7.9 5 1 1 5 6 ( 15) 30 ( 80) 3 7 BZX384C8V2-G YE 7.7 8.2 8.7 5 1 0.7 5 6 ( 15) 40 ( 80) 4 7 BZX384C9V1-G YF 8.5 9.1 9.6 5 1 0.5 6 6 ( 15) 40 ( 100) 5 8 BZX384C10-G YG 9.4 10 10.6 5 1 0.2 7 8 ( 20) 50 ( 150) 5 8 BZX384C11-G YH 10.4 11 11.6 5 1 0.1 8 10 ( 20) 50 ( 150) 5 9 BZX384C12-G YI 11.4 12 12.7 5 1 0.1 8 10 ( 25) 50 ( 150) 6 9 BZX384C13-G YK 12.4 13 14.1 5 1 0.1 8 10 ( 30) 50 ( 170) 7 9 BZX384C15-G YL 13.8 15 15.6 5 1 0.05 0.7 VZnom. 10 ( 30) 50 ( 200) 7 9 BZX384C16-G YM 15.3 16 17.1 5 1 0.05 0.7 VZnom. 10 ( 40) 50 ( 200) 8 9.5 BZX384C18-G YN 16.8 18 19.1 5 1 0.05 0.7 VZnom. 10 ( 45) 50 ( 225) 8 9.5 BZX384C20-G YO 18.8 20 21.2 5 1 0.05 0.7 VZnom. 15 ( 55) 60 ( 225) 8 10 BZX384C22-G YP 20.8 22 23.3 5 1 0.05 0.7 VZnom. 20 ( 55) 60 ( 250) 8 10 BZX384C24-G YR 22.8 24 25.6 5 1 0.05 0.7 VZnom. 25 ( 70) 60 ( 250) 8 10 BZX384C27-G YS 25.1 27 28.9 2 0.5 0.05 0.7 VZnom. 25 ( 80) 65 ( 300) 8 10 BZX384C30-G YT 28 30 32 2 0.5 0.05 0.7 VZnom. 30 ( 80) 70 ( 300) 8 10 BZX384C33-G YU 31 33 35 2 0.5 0.05 0.7 VZnom. 35 ( 80) 75 ( 325) 8 10 BZX384C36-G YW 34 36 38 2 0.5 0.05 0.7 VZnom. 35 ( 90) 80 ( 350) 10 12 BZX384C39-G YX 37 39 41 2 0.5 0.05 0.7 VZnom. 40 ( 130) 80 ( 350) 10 12 BZX384C43-G YY 40 43 46 2 0.5 0.05 0.7 VZnom. 45 ( 150) 85 ( 375) 10 12 BZX384C47-G YZ 44 47 50 2 0.5 0.05 0.7 VZnom. 50 ( 170) 85 ( 375) 10 12 BZX384C51-G Z1 48 51 54 2 0.5 0.05 0.7 VZnom. 60 ( 180) 85 ( 400) 8 10 BZX384C56-G Z2 52 56 60 2 0.5 0.05 0.7 VZnom. 70 ( 200) 100 ( 425) 10 12 BZX384C62-G Z3 58 62 66 2 0.5 0.05 0.7 VZnom. 80 ( 215) 100 ( 450) 10 12 BZX384C68-G Z4 64 68 72 2 0.5 0.05 0.7 VZnom. 90 ( 240) 150 ( 475) 10 12 BZX384C75-G Z5 70 75 79 2 0.5 0.05 0.7 VZnom. 95 ( 255) 170 ( 500) 10 12 Rev. 1.6, 14-Oct-16 Document Number: 83335 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BZX384-G-Series www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) ZENER VOLTAGE RANGE PART NUMBER MARKING CODE VZ at IZT1 TEST CURRENT IZT1 V REVERSE LEAKAGE CURRENT IZT2 mA IR at VR μA DYNAMIC RESISTANCE ZZ at IZT1 VZ at IZT1 V MAX. ZZK at IZT2 TEMPERATURE COEFFICIENT OF ZENER VOLTAGE 10-4/°C MIN. NOM. MAX. TYP. TYP. MIN. MAX. BZX384B2V4-G C1 2.35 2.4 2.45 5 1 50 1 70 ( 100) 275 -9 -4 BZX384B2V7-G C2 2.65 2.7 2.75 5 1 20 1 75 ( 100) 300 600) -9 -4 BZX384B3V0-G C3 2.94 3.0 3.06 5 1 10 1 80 ( 95) 325 ( 600) -9 -3 BZX384B3V3-G C4 3.23 3.3 3.37 5 1 5 1 85 ( 95) 350 ( 600) -8 -3 BZX384B3V6-G C5 3.53 3.6 3.67 5 1 5 1 85 ( 90) 375 ( 600) -8 -3 BZX384B3V9-G C6 3.82 3.9 3.98 5 1 3 1 85 ( 90) 400 ( 600) -7 -3 BZX384B4V3-G C7 4.21 4.3 4.39 5 1 3 1 80 ( 90) 410 ( 600) -6 -1 BZX384B4V7-G C8 4.61 4.7 4.79 5 1 3 2 50 ( 80) 425 ( 500) -5 2 BZX384B5V1-G C9 5 5.1 5.2 5 1 2 2 40 ( 60) 400 ( 480) -3 4 BZX384B5V6-G CA 5.49 5.6 5.71 5 1 1 2 15 ( 40) 80 ( 400) -2 6 BZX384B6V2-G CB 6.08 6.2 6.32 5 1 3 4 6 ( 10) 40 ( 150) -1 7 BZX384B6V8-G CC 6.66 6.8 6.94 5 1 2 4 6 ( 15) 30 ( 80) 2 7 BZX384B7V5-G CD 7.35 7.5 7.65 5 1 1 5 6 ( 15) 30 ( 80) 3 7 BZX384B8V2-G CE 8.04 8.2 8.36 5 1 0.7 5 6 ( 15) 40 ( 80) 4 7 BZX384B9V1-G CF 8.92 9.1 9.28 5 1 0.5 6 6 ( 15) 40 ( 100) 5 8 BZX384B10-G CG 9.8 10 10.2 5 1 0.2 7 8 ( 20) 50 ( 150) 5 8 BZX384B11-G CH 10.8 11 11.2 5 1 0.1 8 10 ( 20) 50 ( 150) 5 9 BZX384B12-G CI 11.8 12 12.2 5 1 0.1 8 10 ( 25) 50 ( 150) 6 9 BZX384B13-G CK 12.7 13 13.3 5 1 0.1 8 10 ( 30) 50 ( 170) 7 9 BZX384B15-G CL 14.7 15 15.3 5 1 0.05 0.7 VZnom. 10 ( 30) 50 ( 200) 7 9 BZX384B16-G CM 15.7 16 16.3 5 1 0.05 0.7 VZnom. 10 ( 40) 50 ( 200) 8 9.5 BZX384B18-G CN 17.6 18 18.4 5 1 0.05 0.7 VZnom. 10 ( 45) 50 ( 225) 8 9.5 BZX384B20-G CO 19.6 20 20.4 5 1 0.05 0.7 VZnom. 15 ( 55) 60 ( 225) 8 10 BZX384B22-G CP 21.6 22 22.4 5 1 0.05 0.7 VZnom. 20 ( 55) 60 ( 250) 8 10 BZX384B24-G CR 23.5 24 24.5 5 1 0.05 0.7 VZnom. 25 ( 70) 60 ( 250) 8 10 BZX384B27-G CS 26.5 27 27.5 2 0.5 0.05 0.7 VZnom. 25 ( 80) 65 ( 300) 8 10 BZX384B30-G CT 29.4 30 30.6 2 0.5 0.05 0.7 VZnom. 30 ( 80) 70 ( 300) 8 10 BZX384B33-G CU 32.3 33 33.7 2 0.5 0.05 0.7 VZnom. 35 ( 80) 75 ( 325) 8 10 BZX384B36-G CW 35.3 36 36.7 2 0.5 0.05 0.7 VZnom. 35 ( 90) 80 ( 350) 8 10 BZX384B39-G CX 38.2 39 39.8 2 0.5 0.05 0.7 VZnom. 40 ( 130) 80 ( 350) 10 12 BZX384B43-G CY 42.1 43 43.9 2 0.5 0.05 0.7 VZnom. 45 ( 150) 85 ( 375) 10 12 BZX384B47-G CZ 46.1 47 47.9 2 0.5 0.05 0.7 VZnom. 50 ( 170) 85 ( 375) 10 12 BZX384B51-G D1 50 51 52 2 0.5 0.05 0.7 VZnom. 60 ( 180) 85 ( 400) 10 12 BZX384B56-G D2 54.9 56 57.1 2 0.5 0.05 0.7 VZnom. 70 ( 200) 100 ( 425) 9 11 BZX384B62-G D3 60.8 62 63.2 2 0.5 0.05 0.7 VZnom. 80 ( 215) 100 ( 450) 9 12 BZX384B68-G D4 66.6 68 69.4 2 0.5 0.05 0.7 VZnom. 90 ( 240) 150 ( 475) 10 12 BZX384B75-G D5 73.5 75 76.5 2 0.5 0.05 0.7 VZnom. 95 ( 255) 170 ( 500) 10 12 Rev. 1.6, 14-Oct-16 Document Number: 83335 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BZX384-G-Series www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) Ω 100 mA 103 TJ = 25 °C 102 IF 5 4 10 1 3 rzj TJ = 100 °C 33 2 27 22 10 10-1 18 TJ = 25 °C 10-2 15 5 4 10-3 12 3 10 2 10-4 6.8/8.2 6.2 1 -5 10 0 0.2 0.4 0.6 0.8 1V VF 18114 0.1 2 1 5 2 5 18119 10 IZ 2 5 100 mA Fig. 4 - Dynamic Resistance vs. Zener Current Fig. 1 - Forward Characteristics mW 250 Ω 103 Tj = 25 °C 7 5 4 200 Rzj Ptot 47 + 51 43 39 36 3 2 150 102 100 7 5 4 3 50 2 0 0 100 10 0.1 200 °C Tamb 18192 Fig. 2 - Admissible Power Dissipation vs. Ambient Temperature 3 4 5 2 3 4 5 IZ Ω 103 TJ = 25 °C 5 4 3 2 1 10 mA Fig. 5 - Dynamic Resistance vs. Zener Current Ω 1000 rzj 2 18120 Rzth Rzth = RthA x VZ x 5 4 3 2 Δ VZ ΔTj 102 100 5 4 3 5 4 3 2 2 10 10 2.7 3.6 4.7 5.1 5 4 3 2 5.6 1 0.1 18117 2 5 1 2 5 10 2 5 100 mA IZ Fig. 3 - Dynamic Resistance vs. Zener Current 5 4 3 negative 2 positive 1 1 18121 2 3 4 5 10 2 3 4 5 100 V VZ at IZ = 5 mA Fig. 6 - Thermal Differential Resistance vs. Zener Voltage Rev. 1.6, 14-Oct-16 Document Number: 83335 4 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BZX384-G-Series www.vishay.com Vishay Semiconductors Ω 100 V 9 7 8 5 4 Rzj VZ at IZ = 2 mA 7 3 Δ VZ 2 51 6 5 10 43 4 7 36 3 5 4 2 3 1 2 Tj = 25 °C IZ = 5 mA 1 1 2 3 10 4 5 2 18122 3 4 5 0 IZ = 2 mA -1 100 V 0 VZ 20 40 60 80 100 120 18194 Fig. 7 - Dynamic Resistance vs. Zener Voltage 140 °C Tj Fig. 10 - Change of Zener Voltage vs. Junction Temperature mV/°C 25 mV/°C 100 IZ = 5 mA Δ VZ ΔTj 20 IZ = 15 Δ VZ ΔTj 5 mA 1 mA 20 mA 80 60 10 5 40 0 20 -5 1 2 3 10 4 5 2 3 4 5 0 100 V 0 VZ at IZ = 5 mA V ≥ 27 V, I = 2 mA 18135 Fig. 8 - Temperature Dependence of Zener Voltage vs. Zener Voltage 25 0.7 VZ at IZ = 5 mA V 1.6 15 1.2 0.5 8 0.4 Δ VZ 0.8 6.2 5.9 0.6 0.2 0.1 5.6 0.2 0 5.1 -1 3.6 - 0.2 0 18124 20 40 60 80 4.7 100 120 140 C Tj Fig. 9 - Change of Zener Voltage vs. Junction Temperature 100 V 1 7 0.3 80 VZ at IZ = 2 mA Δ VZ = rzth x IZ IZ = 5 mA VZ ≥ 27 V; IZ = 2 mA 1.4 10 0.6 Δ VZ 60 40 Fig. 11 - Temperature Dependence of Zener Voltage vs. Zener Voltage V 0.8 20 18195 0.4 0 - 0.2 - 0.4 1 18196 2 3 4 5 10 2 3 4 5 100 V VZ at IZ = 5 mA Fig. 12 - Change of Zener Voltage from Turn-on up to the Point of Thermal Equilibrium vs. Zener voltage Rev. 1.6, 14-Oct-16 Document Number: 83335 5 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BZX384-G-Series www.vishay.com V 5 Vishay Semiconductors mA 10 ΔVZ = rzth x IZ Tj = 25 °C 51 39 4 8 3 47 43 lz Δ VZ 6 IZ = 5 mA 2 4 Test Current IZ 2 mA 1 2 IZ = 2.5 mA 0 0 0 20 40 60 100 V 80 VZ at IZ = 5 mA 18160 Fig. 13 - Change of Zener Voltage from Turn-on up to the Point of Thermal Equilibrium vs. Zener voltage mA 50 Tj = 25 °C 0 18191 10 20 30 40 50 60 70 80 90 100 V VZ Fig. 16 - Breakdown Characteristics 3.9 5.6 2.7 6.8 3.3 4.7 40 lZ 8.2 30 20 Test current IZ 5 mA 10 0 0 1 2 3 4 5 6 7 8 9 10 V VZ 18111 Fig. 14 - Breakdown Characteristics mA 30 lZ 10 12 Tj = 25 °C 15 20 18 22 27 Test 10 current IZ 5 mA 33 36 0 0 18112 10 20 30 40 V VZ Fig. 15 - Breakdown Characteristics Rev. 1.6, 14-Oct-16 Document Number: 83335 6 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BZX384-G-Series www.vishay.com Vishay Semiconductors 0.1 [0.004] max. 0.15 [0.006] 0.10 [0.004] 0.2 [0.008] 0.8 [0.031] 1.15 [0.045] PACKAGE DIMENSIONS in millimeters (inches): SOD-323 0° - 8° 0.40 [0.016] 0.25 [0.010] 1.95 [0.077] 2.50 [0.098] 1.1 [0.043] 0.20 [0.008] 0.40 [0.016] 2.85 [0.112] 1.5 [0.059] 1.60 [0.063] Cathode bar Footprint recommendation: 1.6 [0.063] Document no.: S8-V-3910.02-001 (4) Created - Date: 24.August.2004 Rev. 6 - Date: 23.Sept.2016 17443 0.8 [0.031] 0.6 [0.024] 0.8 [0.031] Rev. 1.6, 14-Oct-16 Document Number: 83335 7 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Revision: 13-Jun-16 1 Document Number: 91000