UNISONIC TECHNOLOGIES CO., LTD DTC123J NPN SILICON TRANSISTOR NPN DIGITAL TRANSISTOR (BUILT-IN RESISTORS) FEATURES * Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors (see equivalent circuit). * The bias resistors consist of thin-film resistors with complete isolation to allow negative biasing of the input. They also have the advantage of almost completely eliminating parasitic effects. * Only the on/off conditions need to be set for operation, making device design easy. EQUIVALENT CIRCUIT ORDERING INFORMATION Ordering Number Lead Free Halogen Free DTC123JL-AE3-R DTC123JG-AE3-R DTC123JL-AL3-R DTC123JG-AL3-R DTC123JL-AN3-R DTC123JG-AN3-R DTC123JL-T92-B DTC123JG-T92-B DTC123JL-T92-K DTC123JG-T92-K DTC123JL-T92-R DTC123JG-T92-R DTC123JL-T9S-K DTC123JG-T9S-K Package SOT-23 SOT-323 SOT-523 TO-92 TO-92 TO-92 TO-92SP Pin Assignment 1 2 3 G I O G I O G I O G O I G O I G O I G O I Packing Tape Reel Tape Reel Tape Reel Tape Box Bulk Tape Reel Bulk MARKING (FOR SOT-23/SOT-323/SOR-523 PACKAGE) CC3J J: Lead Free J: Halogen Free www.unisonic.com.tw Copyright © 2012 Unisonic Technologies Co., Ltd 1 of 3 QW-R206-076.E DTC123J NPN SILICON TRANSISTOR ABSOLUTE MAXIMUM RATINGS (TA=25°C, unless otherwise specified) PARAMETER Supply Voltage Input Voltage RATINGS UNIT 50 V -5 ~ +12 V 100 Output Current mA 100 SOT-23/ SOT-323 200 SOT-523 150 Power Dissipation PD mW TO-92 625 TO-92SP 550 Junction Temperature TJ 150 °C Storage Temperature TSTG -55 ~ +150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. SYMBOL VCC VIN IO IC(MAX.) ELECTRICAL CHARACTERISTICS (TA =25°C) PARAMETER SYMBOL VI (OFF) Input Voltage VI (ON) Output Voltage VO (ON) Input Current II Output Current IO(OFF) DC Current Gain GI Input Resistance R1 Resistance Ratio R2/R1 Transition Frequency fT Note: Transition frequency of the device TEST CONDITIONS VCC=5V, IO=100μA VO=0.3V, IO=5mA IO/II =5mA/0.25mA VI =5V VCC=50V, VI =0V VO=5V, IO=10mA VCE =10V, IE=−5mA, f=100MHz (Note) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 1.1 80 1.54 17 TYP MAX UNIT 0.5 V 0.1 0.3 3.6 0.5 V mA μA 2.2 21 250 2.86 26 KΩ MHz 2 of 3 QW-R206-076.E DTC123J Input Current, IIN (µA) Output Current, IOUT (µA) TYPICAL CHARACTERISTICS GND(+) Current, IGND(+) (µA) NPN SILICON TRANSISTOR UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R206-076.E