Ordering number : EN2772C DBB08 0.8A Single-Phase Bridge Rectifier http://onsemi.com Features • • Plastic molded structure and ultrasmall package making it easy to make DBB08-applied sets smaller. Glass passivation for high reliability. Specifications Absolute Maximum Ratings at Ta=25°C Parameter Peak Reverse Voltage Symbol Conditions DBB08G VRM Average Recitifiedd Current IO Surge Forward Current IFSM Junction Temperature Tj Storage Temperature Tstg Unit 600 V Alumina board 0.8 A PCB 0.5 A 50Hz sine wave, 1cycle 30 A 150 °C --40 to +150 °C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Electrical Characteristics at Ta=25°C Parameter Forward Voltage Symbol Reverse Current VF IR Thermal Resistance Rth(j-a) Conditions IF=0.4A VR:At each VRM Mounted on Cu foil (1mm×1mm) on alumina boad Mounted on PCB Ratings min typ max 1.05 10 Unit V μA 76 °C / W 134 °C / W ORDERING INFORMATION See detailed ordering and shipping information on page 3 of this data sheet. Semiconductor Components Industries, LLC, 2013 September, 2013 90413 TKIM/52098HA (KT)/62096GI (KOTO)/92294MO 8-7589/4218TA, TS 8-2176 No. 2772-1/3 DBB08 No. A2772-2/3 DBB08 Package Dimensions DBB08G-TM-E memo DIP4 750 pcs./reel Pb-Free + Shipping -- DBB08G-TM-E Package ∼ Device Electrical Connection ∼ Ordering & Package Information ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. No. A2772-3/3