BRIGHT LED ELECTRONICS CORP. BD-A404ND SINCE 1981 ● 1. Features : ● Package Dimensions : 0.40 inch (10.16mm) Digit Height. 2. Continuous uniform segments. 3. Low power requirement. 4. Excellent characters appearance. 5. Solid state reliability. 6. Categorized for luminous intensity. 7. Direct drive common anode. 5.90(.232) 10 16.00(.630) 10.16(.400) PIN 1. 20.20(.795) 1. Description : This product use hi-eff red chips, which are made from GaAsP on GaP substrate. 3. This product have a black face and white segments. ● 3.0(.118)MIN. 2.54x7=17.78(.700) The BD-A404ND is a 10.16mm(0.40") high dual digit seven segments display. 2. 1.3(.051) 6.9(.272) 0.50(.020) ● 12.7(.500) Notes: 1. All dimensions are in millimeters(inches). 2. Tolerance is ±0.25mm(.01")unless otherwise specified. 3. Specifications are subject to change without notice. Internal Circuit Diagram : Ver.1.0 Page 1 of 3 BRIGHT LED ELECTRONICS CORP. BD-A404ND SINCE 1981 ● Absolute Maximum Ratings(Ta=25℃) Parameter Symbol Rating Unit Power Dissipation Per Segment Pd 80 mW Forward Current Per Segment IF 30 mA IFP (Duty 1/10, 1KHZ) 150 mA VR 5 V Operating Temperature Topr -40℃~80℃ - Storage Temperature Tstg -40℃~85℃ - Soldering Temperature (1/16" From Body) Tsol 260℃ For 5 Seconds - Peak Forward Current Per Segment Reverse Voltage Per Segment ● Electrical And Optical Characteristics(Ta=25℃) Parameter Symbol Condition Min. Typ. Max. Unit Forward Voltage Per Segment Vf IF=10mA - 1.9 2.5 V Luminous Intensity Per Segment Iv IF=10mA - 3.5 - mcd Reverse Current Per Segment IR VR=5V - - 100 µA Peak Wave Length λp IF=10mA - 640 - nm Dominant Wave Length λd IF=10mA 626 - 636 nm Spectral Line Half-width ∆λ IF=10mA - 40 - nm Ver.1.0 Page 2 of 3 BRIGHT LED ELECTRONICS CORP. BD-A404ND SINCE 1981 Typical Electro-Optical Characteristics Curves (25℃ Ambient Temperature Unless Otherwise Noted) Fig.1 Relative Radiant Intensity VS. Wavelength Relative Radiant Intensity 1.0 0.5 0 560 590 620 Fig.2 Forward Current VS. Forward Voltage 40 30 20 10 0 650 Wavelength(nm) Relative Luminous Intensity (@20mA) Forward Current (mA) 50 0 1 2 3 4 5 Fig.4 Relative Luminous Intensity VS. Forward Current 2.0 1.0 0.0 0 10 20 30 40 Forward Current(mA) 3.0 50 710 740 Fig.3 Relative Luminous Intensity VS. Ambient Temperature 2.5 2.0 1.5 1.0 0.5 0 -40 50 Forward Current(mA) 3.0 680 -20 0 20 40 60 Ambient Temperature Ta( C) Forward Voltage (V) Relative Luminous Intensity (@20mA) ● Fig.5 Forward Current Derating Curve VS. Ambient Temperature 40 30 20 10 0 0 20 40 60 80 100 120 Ambient Temperature Ta( C) Ver.1.0 Page 3 of 3