FDBL0090N40 N-Channel PowerTrench® MOSFET 40 V, 240 A, 0.9 mΩ Features Typical RDS(on) = 0.65 mΩ at VGS = 10V, ID = 80 A Typical Qg(tot) = 144 nC at VGS = 10V, ID = 80 A D UIS Capability RoHS Compliant Applications Industrial Motor Drive G Industrial Power Supply Industrial Automation Battery Operated tools S Battery Protection For current package drawing, please refer to the Fairchild web‐ site at https://www.fairchildsemi.com/evaluate/package‐spec‐ ifications/packageDetails.html?id=PN_PSOFA‐008 Solar Inverters UPS and Energy Inverters Energy Storage Load Switch MOSFET Maximum Ratings TJ = 25°C unless otherwise noted. Symbol VDSS Drain-to-Source Voltage VGS ID EAS PD Parameter Gate-to-Source Voltage Ratings 40 Units V ±20 V Drain Current - Continuous (VGS=10) (Note 1) TC = 25°C 240 Pulsed Drain Current TC = 25°C See Figure 4 Single Pulse Avalanche Energy (Note 2) A 737 mJ Power Dissipation 357 W Derate Above 25oC 2.38 W/oC TJ, TSTG Operating and Storage Temperature o -55 to + 175 RθJC Thermal Resistance, Junction to Case RθJA Maximum Thermal Resistance, Junction to Ambient o 0.42 (Note 3) C C/W oC/W 43 Notes: 1: Current is limited by bondwire configuration. 2: Starting TJ = 25°C, L = 0.36mH, IAS = 64A, VDD = 40V during inductor charging and VDD = 0V during time in avalanche. 3: RθJA is the sum of the junction-to-case and case-to-ambient thermal resistance, where the case thermal reference is defined as the solder mounting surface of the drain pins. RθJC is guaranteed by design, while RθJAis determined by the board design. The maximum rating presented here is based on mounting on a 1 in2 pad of 2oz copper. Package Marking and Ordering Information Device Marking FDBL0090N40 Device FDBL0090N40 ©2014 Fairchild Semiconductor Corporation FDBL0090N40 Rev.C2 Package MO-299A - 1 - - www.fairchildsemi.com FDBL0090N40 N-Channel PowerTrench® MOSFET November 2014 Symbol Parameter Test Conditions Min. Typ. Max. Units Off Characteristics BVDSS Drain-to-Source Breakdown Voltage IDSS Drain-to-Source Leakage Current IGSS Gate-to-Source Leakage Current ID = 250μA, VGS = 0V VDS = 40V, VGS = 0V 40 - - V - - 1 μA - - 1 mA - - ±100 nA TJ = 25oC TJ = 175oC (Note 4) VGS = ±20V On Characteristics VGS(th) RDS(on) Gate to Source Threshold Voltage Drain to Source On Resistance VGS = VDS, ID = 250μA ID = 80A, VGS= 10V 2.0 3.3 4.0 V - 0.65 0.90 mΩ - 1.10 1.50 mΩ TJ = 25oC TJ = 175oC (Note 4) Dynamic Characteristics Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance Rg Gate Resistance f = 1MHz Qg(ToT) Total Gate Charge at 10V VGS = 0 to 10V Qg(th) Threshold Gate Charge VGS = 0 to 2V Qgs Gate-to-Source Gate Charge Qgd Gate-to-Drain “Miller“ Charge - VDS = 25V, VGS = 0V, f = 1MHz VDD = 32V ID = 80A - 12000 - pF - 3260 - pF - 442 - pF - 3.3 - Ω - 144 188 nC - 22 26 nC - 66 - nC 16 - nC ns Switching Characteristics ton Turn-On Time - - 162 td(on) Turn-On Delay - 42 - ns tr Rise Time - 73 - ns td(off) Turn-Off Delay - 83 - ns tf Fall Time - 50 - ns toff Turn-Off Time - - 279 ns V VDD = 20V, ID = 80A, VGS = 10V, RGEN = 6Ω Drain-Source Diode Characteristics VSD Source-to-Drain Diode Voltage trr Reverse-Recovery Time Qrr Reverse-Recovery Charge ISD =80A, VGS = 0V - - 1.25 ISD = 40A, VGS = 0V - - 1.2 V IF = 80A, dISD/dt = 100A/μs, VDD=32V - 111 129 ns - 178 214 nC Note: 4: The maximum value is specified by design at TJ = 175°C. Product is not tested to this condition in production. FDBL0090N40 Rev.C2 2 www.fairchildsemi.com FDBL0090N40 N-Channel PowerTrench® MOSFET Electrical Characteristics TJ = 25°C unless otherwise noted. 600 1.0 500 ID, DRAIN CURRENT (A) POWER DISSIPATION MULTIPLIER 1.2 0.8 0.6 0.4 0.2 0.0 0 25 50 75 100 125 150 TC, CASE TEMPERATURE(oC) CURRENT LIMITED BY PACKAGE VGS = 10V CURRENT LIMITED BY SILICON 400 300 200 100 0 175 25 50 75 100 125 150 175 TC, CASE TEMPERATURE(oC) 200 Figure 2. Maximum Continuous Drain Current vs. Case Temperature Figure 1. Normalized Power Dissipation vs. Case Temperature NORMALIZED THERMAL IMPEDANCE, ZθJC 2 1 DUTY CYCLE - DESCENDING ORDER D = 0.50 0.20 0.10 0.05 0.02 0.01 0.1 PDM t1 t2 NOTES: DUTY FACTOR: D = t1/t2 PEAK TJ = PDM x ZθJA x RθJA + TC SINGLE PULSE 0.01 -5 10 -4 10 -3 -2 -1 0 10 10 10 t, RECTANGULAR PULSE DURATION(s) 1 10 10 Figure 3. Normalized Maximum Transient Thermal Impedance 10000 VGS = 10V TC = 25oC IDM, PEAK CURRENT (A) FOR TEMPERATURES ABOVE 25oC DERATE PEAK CURRENT AS FOLLOWS: 1000 I = I2 175 - TC 150 100 SINGLE PULSE 10 -5 10 -4 10 -3 -2 -1 10 10 10 t, RECTANGULAR PULSE DURATION(s) 0 10 1 10 Figure 4. Peak Current Capability FDBL0090N40 Rev.C2 3 www.fairchildsemi.com FDBL0090N40 N-Channel PowerTrench® MOSFET Typical Characteristics 100 100us OPERATION IN THIS AREA MAY BE LIMITED BY rDS(on) 10 1 1ms SINGLE PULSE TJ = MAX RATED TC = 25oC 0.1 0.1 10ms 100ms TJ = 25oC 60 0 2 0.01 0.1 1 10 100 1000 10000 400 180 TJ = 175oC STARTING TJ = 150oC Figure 6. Unclamped Inductive Switching Capability VDD = 5V 120 10 NOTE: Refer to Fairchild Application Notes AN7514 and AN7515 PULSE DURATION = 80μs DUTY CYCLE = 0.5% MAX 240 STARTING TJ = 25oC tAV, TIME IN AVALANCHE (ms) IS, REVERSE DRAIN CURRENT (A) ID, DRAIN CURRENT (A) 300 100 1 0.001 1 10 100 200 VDS, DRAIN TO SOURCE VOLTAGE (V) Figure 5. Forward Bias Safe Operating Area TJ = -55oC 3 4 5 6 VGS, GATE TO SOURCE VOLTAGE (V) VGS = 0 V 100 TJ = 175 oC 10 TJ = 25 oC 1 0.1 0.0 7 0.2 0.4 0.6 0.8 1.0 1.2 VSD, BODY DIODE FORWARD VOLTAGE (V) Figure 7. Transfer Characteristics Figure 8. Forward Diode Characteristics 300 300 VGS 15V Top 10V 8V 7V 6V 5.5V 5V Bottom 250 200 150 100 80μs PULSE WIDTH Tj=25oC 50 ID, DRAIN CURRENT (A) ID, DRAIN CURRENT (A) If R = 0 tAV = (L)(IAS)/(1.3*RATED BVDSS - VDD) If R ≠ 0 tAV = (L/R)ln[(IAS*R)/(1.3*RATED BVDSS - VDD) +1] 1000 IAS, AVALANCHE CURRENT (A) ID, DRAIN CURRENT (A) 2000 1000 5V 0 0 1 2 3 4 VDS, DRAIN TO SOURCE VOLTAGE (V) 5V 200 150 100 50 0 5 Figure 9. Saturation Characteristics FDBL0090N40 Rev.C2 250 VGS 5.5V 15V Top 10V 8V 7V 6V 5.5V 5V Bottom 80μs PULSE WIDTH Tj=175oC 0 1 2 3 4 VDS, DRAIN TO SOURCE VOLTAGE (V) 5 Figure 10. Saturation Characteristics 4 www.fairchildsemi.com FDBL0090N40 N-Channel PowerTrench® MOSFET Typical Characteristics ID = 80A NORMALIZED DRAIN TO SOURCE ON-RESISTANCE rDS(on), DRAIN TO SOURCE ON-RESISTANCE (mΩ) 10 PULSE DURATION = 80μs DUTY CYCLE = 0.5% MAX 8 6 TJ = 175oC TJ = 25oC 4 2 0 2 4 6 8 VGS, GATE TO SOURCE VOLTAGE (V) 10 Figure 11. RDSON vs. Gate Voltage 1.6 1.4 1.2 1.0 0.8 ID = 80A VGS = 10V 0.6 0.4 -80 -40 0 40 80 120 160 TJ, JUNCTION TEMPERATURE(oC) 200 Figure 12. Normalized RDSON vs. Junction Temperature 1.10 VGS = VDS ID = 250μA 1.2 ID = 1mA 1.05 0.9 1.00 0.6 0.95 0.3 0.0 -80 -40 0 40 80 120 160 TJ, JUNCTION TEMPERATURE(oC) 0.90 -80 200 Figure 13. Normalized Gate Threshold Voltage vs. Temperature VGS, GATE TO SOURCE VOLTAGE(V) Ciss 10000 Coss 1000 Crss 100 f = 1MHz VGS = 0V 10 0.1 1 10 VDS, DRAIN TO SOURCE VOLTAGE (V) 100 Figure 15. Capacitance vs. Drain to Source Voltage FDBL0090N40 Rev.C2 -40 0 40 80 120 160 TJ, JUNCTION TEMPERATURE (oC) 200 Figure 14. Normalized Drain to Source Breakdown Voltage vs. Junction Temperature 100000 CAPACITANCE (pF) PULSE DURATION = 80μs DUTY CYCLE = 0.5% MAX 1.8 NORMALIZED DRAIN TO SOURCE BREAKDOWN VOLTAGE NORMALIZED GATE THRESHOLD VOLTAGE 1.5 2.0 10 ID = 80A VDD = 20V 8 VDD =16V 6 VDD = 24V 4 2 0 0 30 60 90 120 Qg, GATE CHARGE(nC) 150 Figure 16. Gate Charge vs. Gate to Source Voltage 5 www.fairchildsemi.com FDBL0090N40 N-Channel PowerTrench® MOSFET Typical Characteristics TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. AccuPower™ F-PFS™ ®* ® Awinda® FRFET® ® PowerTrench® AX-CAP * Global Power ResourceSM ® TinyBoost BitSiC™ GreenBridge™ PowerXS™ TinyBuck® Build it Now™ Green FPS™ Programmable Active Droop™ TinyCalc™ ® CorePLUS™ Green FPS™ e-Series™ QFET TinyLogic® CorePOWER™ Gmax™ QS™ TINYOPTO™ CROSSVOLT™ GTO™ Quiet Series™ TinyPower™ CTL™ IntelliMAX™ RapidConfigure™ TinyPWM™ Current Transfer Logic™ ISOPLANAR™ ™ TinyWire™ DEUXPEED® Marking Small Speakers Sound Louder TranSiC™ Dual Cool™ Saving our world, 1mW/W/kW at a time™ and Better™ TriFault Detect™ EcoSPARK® SignalWise™ MegaBuck™ TRUECURRENT®* SmartMax™ EfficentMax™ MICROCOUPLER™ μSerDes™ SMART START™ ESBC™ MicroFET™ Solutions for Your Success™ MicroPak™ ® SPM® MicroPak2™ ® STEALTH™ UHC® MillerDrive™ Fairchild ® ® Ultra FRFET™ SuperFET MotionMax™ Fairchild Semiconductor SuperSOT™-3 UniFET™ MotionGrid® FACT Quiet Series™ ® MTi SuperSOT™-6 VCX™ FACT® ® MTx SuperSOT™-8 VisualMax™ FAST® ® ® MVN SupreMOS VoltagePlus™ FastvCore™ ® mWSaver SyncFET™ XS™ FETBench™ OptoHiT™ Sync-Lock™ Xsens™ FPS™ 仙童 ™ tm *Trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. TO OBTAIN THE LATEST, MOST UP-TO-DATE DATASHEET AND PRODUCT INFORMATION, VISIT OUR WEBSITE AT HTTP://WWW.FAIRCHILDSEMI.COM. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used here in: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation’s Anti-Counterfeiting Policy. Fairchild’s Anti-Counterfeiting Policy is also stated on our external website, www.Fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufactures of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed application, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild’s quality standards for handing and storage and provide access to Fairchild’s full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address and warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative / In Design Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Obsolete Not In Production Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I71 FDBL0090N40 Rev.C2 6 www.fairchildsemi.com