Electric Double Layer Capacitors (Gold Capacitor)/ RG Stacked Coin Type Series: RG ■ Features ● Endurance: 85 °C 2000 h ● Can be discharged mA current ● RoHS directive compliant ■ Recommended Applications ● Backup of data/RTC of base station, electronic meter, and industrial equipment ● For assist of rapid load change ■ Specifications Category temp. range Maximum operating voltage Nominal capacitance Capacitance tolerance –25 °C to +85 °C 3.6 V DC 0.22 F 1.0 F –20 % to +80% Capacitance change ±30 % of initial measured value at +20 °C (at –25 °C) Internal resistance <5 times of initial measured value at +20 °C (at –25 °C) After 2000 hours application of maximum operating voltage at +85 °C Endurance Capacitance change ±30 % of initial measured value at 20 °C ±30 % of initial measured value at 20 °C Internal resistance 100 액 or less 40 액 or less After 2000 hours storage at +85 °C without load (voltage) Shelf life Capacitance change Capacitance change shall meet the specified limits for Endurance Internal resistance Internal resistance shall meet the specified limits for Endurance Characteristics at Low Temperature ■ Dimensions in mm(not to scale) (Unit : mm) RG series 0.22(F) φ19.0±0.3 11.5 max. – 6.0 max. 5.0±0.8 Terminal : H 1.0±0.1 5.0±0.5 φ19.0±0.3 20.0±0.5 1.0±0.1 0.2±0.05 3.0±0.5 0.8±0.05 (1.7) 20.5 Max. + 0.20±0.05 0.2±0.05 10.0±0.5 Sleeve 5.5±0.5 21.0 max. 4.0±0.3 φ10.5 max. 11.5 max. 0.2±0.05 3.0±0.5 0.8±0.05 (1.7) Sleeve 5.0 max. 10.5 max. Terminal : V 3.5±0.3 6.5 max. Terminal : H 5.0±0.3 Terminal : V RG series 1.0(F) ■ Standard Products Maximum operating voltage (V DC) 3.6 Capacitance Internal resistance Recommended (Initial specified value) discharge current Parts number (mA) Mass Min. packaging Q'ty (g) (pcs) (F) (액) at 1 kHz 0.22 <50 1 or less EECRG0V224() 1.0 200 1.0 <20 20 or less EECRG0V105() 4.1 100 Do not use reflow sp;dering.(IR, Atmospherheating methods, etc.) Please refer to the page of “Application Guidelines”. ( ): Please use V or H to indicate terminal type. The recommended discharge current is a reference value. Please design your equipment(circuit) in consideration of IR dorop. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – EEC-2 – 00 Nov. 2012