Kingbright APTC2012PBC-A-F01 2.0x1.25mm smd chip led lamp Datasheet

2.0x1.25mm SMD CHIP LED LAMP
ATTENTION
Part Number: APTC2012PBC/A-F01
BLUE
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
Description
z2.0mmx1.25mm SMT LED,0.75mm THICKNESS.
The Blue source color devices are made with InGaN on SiC
zLOW POWER CONSUMPTION.
Light Emitting Diode.
zWIDE VIEWING ANGLE.
Static electricity and surge damage the LEDS.
zIDEAL FOR BACKLIGHT AND INDICATOR.
It is recommended to use a wrist band or anti-electrostatic
zVARIOUS COLORS AND LENS TYPES AVAILABLE.
glove when handling the LEDs.
zPACKAGE : 2000PCS / REEL.
All devices, equipment and machinery must be electrically
zMOISTURE SENSITIVITY LEVEL : LEVEL 3.
grounded.
zRoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3. Specifications are subject to change without notice.
SPEC NO: DSAG5976
REV NO: V.1
DATE: JUN/24/2006
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN:Y.L.LI
PAGE: 1 OF 5
ERP:1203003788
Selection Guide
Dice
Part No.
APTC2012PBC/A-F01
Iv (mcd) [2]
@ 20mA
Lens Type
BLUE (InGaN)
Viewing
Angle [1]
Min.
Typ.
2θ1/2
18
60
120°
WATER CLEAR
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2.Luminous Intensity / Luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
λpeak
Peak Wavelength
Blue
λD [1]
Dominant Wavelength
Δλ1/2
Typ.
Max.
Units
Test Conditions
468
nm
IF=20mA
Blue
470
nm
IF=20mA
Spectral Line Half-width
Blue
21
nm
IF=20mA
C
Capacitance
Blue
100
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Blue
3.3
3.8
V
IF=20mA
IR
Reverse Current
Blue
10
uA
VR = 5V
Notes:
1. Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
Blue
Units
Power dissipation
114
mW
DC Forward Current
30
mA
Peak Forward Current [1]
100
mA
5
V
Reverse Voltage
Operating/Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAG5976
REV NO: V.1
DATE: JUN/24/2006
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN:Y.L.LI
PAGE: 2 OF 5
ERP:1203003788
Blue
APTC2012PBC/A-F01
SPEC NO: DSAG5976
REV NO: V.1
DATE: JUN/24/2006
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN:Y.L.LI
PAGE: 3 OF 5
ERP:1203003788
APTC2012PBC/A-F01
Recommended Soldering Pattern
(Units: mm ; Tolerance: ± 0.1)
Tape Specifications
(Units : mm)
SPEC NO: DSAG5976
REV NO: V.1
DATE: JUN/24/2006
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN:Y.L.LI
PAGE: 4 OF 5
ERP:1203003788
PACKING & LABEL SPECIFICATIONS
APTC2012PBC/A-F01
SPEC NO: DSAG5976
REV NO: V.1
DATE: JUN/24/2006
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN:Y.L.LI
PAGE: 5 OF 5
ERP:1203003788
Similar pages