MBRS2035CT THRU MBRS20100CT 20.0 AMPS. Schottky Barrier Rectifiers Voltage Range 35 to 100 Volts Current 20.0 Amperes D2PAK Features For surface mounted application Plastic material used carries Underwriters Laboratory Classifications 94V-0 Metal silicon junction, majority carrier conduction Low power loss, high efficiency High current capability, low forward voltage drop High surge capability For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications Guardring for overvoltage protection High temperature soldering guaranteed: 260oC/10 seconds at terminals Mechanical Data Cases: JEDEC D2PAK molded plastic Terminals: Leads solderable per MIL-STD-750, Method 2026 Polarity: As marked Mounting position: Any Mounting torque: 5 in. - lbs. max Weight: 0.06 ounce, 1.70 grams Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol MBRS MBRS Type Number Units VRRM VRMS VDC MBRS MBRS MBRS 2035CT 2045CT 2050CT 2060CT 20100CT 35 45 50 60 100 24 31 35 42 70 35 45 50 60 100 Maximum Average Forward Rectified Current o at TC=135 C I(AV) 20 A Peak Repetitive Forward Current (Rated VR, Square Wave, o 20KHz) at Tc=135 C IFRM 20.0 A Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Peak Repetitive Reverse Surge Current (Note 1) Maximum Instantaneous Forward Voltage at (Note 2) O IF=10A, Tc=25 C O IF=10A, Tc=125 C O IF=20A, Tc=25 C O IF=20A, Tc=125 C Maximum Instantaneous Reverse Current @ Tc=25℃ at Rated DC Blocking Voltage @ Tc=125℃ Voltage Rate of Change, (Rated VR) Typical Thermal Resistance Per Leg (Note 3) Operating Junction Temperature Range Storage Temperature Range IFSM IRRM VF IR 150 0.5 - 0.80 0.70 0.95 0.85 RθJC TJ TSTG Notes: 1. 2.0us Pulse Width, f=1.0 KHz 2. Pulse Test: 300us Pulse Width, 1% Duty Cycle 3. Thermal Resistance from Junction to Case Per Leg. - 136 - V A 0.85 0.75 0.95 0.85 0.15 150.0 1.5 -65 to +150 -65 to +175 V mA mA 10,000 dV/dt V A 1.0 0.57 0.84 0.72 0.1 15.0 V V/uS 2.0 ℃/W ℃ ℃ RATINGS AND CHARACTERISTIC CURVES (MBRS2035CT THRU MBRS20100CT) FIG.1- FORWARD CURRENT DERATING CURVE FIG.2- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PER LEG 150 RESISTIVE OR INDUCTIVE LOAD PEAK FORWARD SURGE CURRENT. (A) AVERAGE FORWARD CURRENT. (A) 20 16 12 8 4 0 0 50 100 Tj=Tj max. 8.3ms Single Half Sine Wave JEDEC Method 125 100 75 50 25 0 150 1 10 o CASE TEMPERATURE. ( C) FIG.4- TYPICAL REVERSE CHARACTERISTICS PER LEG FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER LEG 50 Tj=150 0C 10 INSTANTANEOUS REVERSE CURRENT. (mA) INSTANTANEOUS FORWARD CURRENT. (A) 40 10 100 NUMBER OF CYCLES AT 60Hz Pulse Width=300 s 1% Duty Cycle 1 Tj=25 0C 0.1 MBRS2035CT-MBRS2045CT MBRS2050CT & MBRS2060CT MBRS20100CT Tj=125 0C 1 Tj=75 0C 0.1 0.01 Tj=25 0C MBRS2035CT-MBRS2045CT MBRS2050CT & MBRS20100CT 0.01 0 0.1 0.2 0.3 0.4 0.5 0.001 0.6 0.7 0.8 0.9 1.0 1.1 1.2 40 60 80 100 120 140 100 TRANSIENT THERMAL IMPEDANCE. ( OC/W) JUNCTION CAPACITANCE.(pF) 20 FIG.6- TYPICAL TRANSIENT THERMAL IMPEDANCE PER LEG FIG.5- TYPICAL JUNCTION CAPACITANCE PER LEG 5,000 Tj=25 0C f=1.0MHz Vsig=50mVp-p 1,000 MBRS2035CT-MBRS2045CT MBRS2050CT & MBRS20100CT 100 0.1 0 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) FORWARD VOLTAGE. (V) 1 10 100 REVERSE VOLTAGE. (V) 10.0 1 0.1 0.01 0.1 1 T, PULSE DURATION. (sec) - 137 - 10 100