SP-Cap/ Conductive Polymer Aluminum Capacitors (Specialty Polymer Aluminum Capacitors) Surface Mount Type Series: SL Old series ■ Features ● ● ● ● Low-ESR (9 mΩ) Excellent Noise-absorbent Characteristics High Ripple Current RoHS directive compliant [Our Requests] Since this series is old, we don't recommend you to adopt it but SX series for your new design. ■ Specifications Series & Size Code Category Temp. Range Rated Voltage Range Nominal Cap.Range Capacitance Tolerance SL –40 °C to +105 °C 2 V.DC to 6.3 V.DC 56 μF to 220 μF ±20 % Reflow 240 °C : I < 0.04 CV (μA) 2 minutes (6.3 V.DC) DC Leakage Current Reflow 260 °C : I < 0.1 CV (μA) 2 minutes < 0.06 (120 Hz/+20 °C) Rated Voltage × 1.25 (15 °C to 35 °C) After applying rated voltage for 1000 hours at 105 °C±2 °C, and then being stabilized at +20 °C, capacitor shall meet the following limits. Capacitance change ±10% of initial measured value tan d < Initial specified value DC leakage current < Initial specified value After storing for 500 hours at 60 °C, 90 % 2, 2.5 V.DC 4 V.DC 6.3 V.DC Capacitance change of initial measurd value +70, –20 % +60, –20 % +50, –20 % tan d < 200 % of initial specified value DC leakage current < Initial specified value tan d Surge Voltage Endurance Moisture resistance ■ Marking ■ Dimensions in mm(not to scale) (Unit : mm) + H – P P L Lot No. Series & Size Code SL R.V. code W1 W2 Polarity bar (Positive) W2 Cap. L±0.2 W1±0.2 W2±0.1 7.3 4.3 2.4 H P±0.3 1.8±0.1 1.3 ✽ Externals of figure are the reference. ■ Low ESR Products Rated CapaciSeries & Voltage tance Size Code (V.DC) (±20 %) (μF) 2 SL 2.5 4 6.3 100 120 150 180 220 100 120 150 82 56 Reflow ✽3 Case Size Specification ✽1 L (mm) W (mm) H (mm) 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 Reflow ✽2 Ripple ESR current (Ar.m.s.) (mΩ max.) 3.0 9 3.0 9 3.0 9 3.0 9 3.0 9 3.0 9 3.0 9 3.0 9 3.0 9 3.0 9 <260 °C> Part number EEFSL0D101ER EEFSL0D121ER EEFSL0D151ER EEFSL0D181ER EEFSL0D221ER EEFSL0E101ER EEFSL0E121ER EEFSL0E151ER EEFSL0G820ER EEFSL0J560R Min. Packaging Q’ty 240 °C 260 °C (pcs) ✽4 — — — — — — — — — ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯ — 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 ✽1: Ripple current (100 kHz/ +20 to +105 °C ), ✽2: ESR (100 kHz/+20 °C) ✽3: Please refer to the page of “Mounting Specifications”. ✽4: Please contact Panasonic for details of allowable 240 °C reflow condition. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Mar. 2015 – EEF-19 –