CX3VSM CRYSTAL 18 kHz to 600 kHz Miniature Surface Mount Quartz Crystal for Pierce Oscillators ™ DESCRIPTION actual size The CX3VSM quartz crystals are leadless devices designed for surface mounting on printed circuit boards or hybrid substrates. These miniature crystals are intended to be used in Pierce oscillators. They are hermetically sealed in a rugged, miniature ceramic package. They are manufactured using the STATEKdeveloped photolithographic process, and were designed utilizing the experience acquired by producing millions of crystals for industrial, commercial, military and medical applications. Maximum process temperature should not exceed 260O C. side view Glass Lid Shown PACKAGE DIMENSIONS D TOP A BOTTOM E FEATURES D E B Miniature tuning fork design C High shock resistance TYP. Designed for low power applications Compatible with hybrid or PC board packaging Low aging MAX. DIM inches mm inches mm A 0.263 6.68 0.270 6.86 B 0.097 2.46 0.104 2.64 Full military testing available C - - Ideal for battery operated applications D 0.052 1.32 0.058 1.47 Designed and manufactured in the USA E 0.030 0.76 0.035 0.89 DIM “C“” EQUIVALENT CIRCUIT C0 1 L1 C1 R1 2 see below GLASS LID CERAMIC LID MAX inches mm inches mm SM1 0.053 1.35 0.067 1.70 SM2 0.055 1.40 0.069 1.75 SM3 0.058 1.47 0.072 1.83 CONVENTIONAL CMOS PIERCE OSCILLATOR CIRCUIT R1 Motional Resistance L1 Motional Inductance C1 Motional Capacitance C0 Shunt Capacitance Rf SUGGESTED LAND PATTERN BUFFER 0.070 (1.78) AMPLIFIER RA OSC Freq (fO ) 0.110 (2.79) CG CX3 XTAL CD 10104 - Rev B IS O STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com YS 90 01 TEM C ERT I F I C AT N IO S inches (mm) 0.210 (5.33) FIGURE 1 CX3V TYPICAL MOTIONAL RESISTANCE (R1) *Tighter frequency calibration available. ** Other turning point available. *** Higher shock and vibration available. CX3V Standard Calibration Tolerance at 250C 300 200 100 R1(k) 50 18 + _ 50 ppm (0.005%) + _ + _ + _ + _ + _ + _ 100 ppm (0.01%) + _ 100 ppm (0.01%) 100 ppm (0.01%) + _ 1000 ppm (0.1%) 1000 ppm (0.1%) 200 ppm (0.02%) 200 ppm (0.02%) + _ + _ 5000 ppm (0.5%) Load Capacitance (CL), Used to Calibrate CX3V (other CL available) Frequency Load Range Capacitance (kHz) (pF) Frequency Range (kHz) 18-24.9 25-54.9 55-100.0 100.1-179.9 180-600 10 9 8 Load Capacitance (pF) 5 4 HOW TO ORDER CX3VSM CRYSTALS CX3V S “S” if special or custom design. Blank if Std. C SM1 32.0K, 30 Frequency K = kHz Calibration Tolerance @ 25OC (in ppm) SM1 = Gold Plated SM2 = Solder Plated SM3 = Solder Dipped 18 50 M Operating Temp. Range: C = -10OC to +70OC I = -40OC to +85OC M = -55OC to +125OC S = Customer Specified 100 200 600 Frequency (kHz) FIGURE 3 CX3V TYPICAL QUALITY FACTOR (Q) 300 200 100 50 18 50 100 200 600 Frequency (kHz) FIGURE 4 CX3V TYPICAL TURNING POINT TEMP. (T0) +80 +70 +60 +50 +40 +30 +20 +10 0 -10 -20 18 50 100 200 600 Frequency (kHz) Note: Frequency f at temperature T is related to frequency f0 at turning point temperature T0 by: 2 f-f0 = k(T-T0) f0 TERMINATIONS Designation SM1 SM2 SM3 Termination Gold Plated Solder Plated Solder Dipped PACKAGING OPTIONS CX3VSM - Tray Pack - Tape and Reel (Reference tape and reel data sheet 10109) 10104 - Rev B IS O STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com YS 90 01 TEM C ERT I F I C AT N IO S Blank = Glass Lid C = Ceramic Lid / 1.0 0.5 500 ppm (0.05%) 2000 ppm (0.2%) 600 2 250-600 30 ppm (0.003%) 200 5 O + _ 100 FIGURE 2 CX3V TYPICAL MOTIONAL CAPACITANCE (C1) 20 170-249.9 50 Frequency (kHz) TO( C) 75-169.9 10 2 Frequency Range (kHz) 18-74.9 20 5 C1(fF) Specifications are typical at 250C unless otherwise noted. Specifications are subject to change without notice. Frequency Range 18 kHz to 600 kHz Functional Mode Tuning Fork (Flexure) Standard Calibration Tolerance* (see table below) Motional Resistance (R1) See Figure 1 MAX.: 18-25 kHz, 2x Typ. 25-600 kHz, 2.5x Typ. Motional Capacitance (C1) Figure 2 Quality Factor (Q) Figure 3 MIN is 0.25x Typ. Shunt Capacitance (C0) 1.8 pF MAX Drive Level 18-24.9 kHz 0.5 µW MAX. 25-600 kHz 1.0 µW MAX. Turning Point (T0)** Figure 4 Temperature Coefficient (k) -0.035 ppm/0C2 Aging, first year 5 ppm MAX Shock, survival*** 1,500 g peak, 0.3 ms, 1/2 sine Vibration, survival*** 10 g RMS, 20-2,000 Hz random Operating Temp. Range -10OC to +70OC (Commercial) -40OC to +85OC (Industrial) -55OC to +125OC (Military) Storage Temp. Range -55OC to +125OC Max Process Temperature 260OC for 20 sec. (in 1000's) SPECIFICATIONS