FEC30W SERIES 30 WATTS DC-DC CONVERTER FEATURES • 30 WATTS MAXIMUM OUTPUT POWER • OUTPUT CURRENT UP TO 8A • STANDARD 2.00 X 1.60 X 0.40 INCH PACKAGE • HIGH EFFICIENCY UP TO 88% • 4:1 WIDE INPUT VOLTAGE RANGE • SIX-SIDED CONTINUOUS SHIELD • FIXED SWITCHING FREQUENCY • OFFER SINGLE AND DUAL OUTPUT • UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS • CE MARKED • COMPLIANT TO RoHS II & REACH OPTIONS Negative logic Remote On/Off APPLICATIONS Wireless Network Telecom/Datacom Industry Control System Measurement Equipment Semiconductor Equipment DESCRIPTION The FEC30W series offer 30 watts of output power from a 2.00 x 1.60 x 0.40 inch package .The FEC30W series with 4:1 wide input voltage of 10~40VDC and 18~75VDC and features 1600VDC of isolation, short-circuit and over-voltage protection. T E C H N I C A L S P E C I F I C AT I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted INPUT SPECIFICATIONS OUTPUT SPECIFICATIONS Output power 30 Watts, max. Voltage accuracy ± 1% Minimum load See Table Voltage adjustability Line regulation ± 10% LL to HL at Full Load ± 0.5% ± 0.5% ± 1% ± 5% Single Dual Cross regulation (Dual) Asymmetrical load 25% / 100% FL 20MHz bandwidth Ripple and noise See table (Measured with a 0.1µF/50V MLCC) Temperature coefficient ± 0.02% / ºC, max. Load regulation No Load to Full Load Transient response recovery time 25% load step change 1.5VDC output 1.8VDC output 2.5VDC output Over voltage protection 3.3VDC output Zener diode clamp 5VDC output 12VDC output 15VDC output Over load protection % of FL at nominal input Short circuit protection 250µs 3.9VDC 3.9VDC 3.9VDC 3.9VDC 6.2VDC 15VDC 18VDC 150%, max. Continuous, automatics recovery GENERAL SPECIFICATIONS Efficiency Isolation voltage Isolation resistance See table Input to Output 1600VDC, min. 1minute Input (Output) to Case 1600VDC, min. 1minute 9 500VDC 10 ohms, min. Isolation capacitance 1000pF, max. Switching frequency Safety approvals 300kHz±10%. IEC60950-1, UL60950-1, & EN60950-1 Case material Nickel-coated copper Base material FR4 PCB Potting material Epoxy (UL94 V-0) 2.00 X 1.60 X 0.40 Inch (50.8 X 40.6 X 10.2 mm) 48g (1.69oz) Dimensions Weight MTBF (Note 1) Page 1 of 3 MIL-HDBK-217F 7.598 x 105 hrs 10 – 40VDC 18 – 75VDC Input filter L-C type 24VDC input 50VDC 100ms,max Input surge voltage 48VDC input 100VDC 100ms,max Input reflected ripple current 20mAp-p Nominal input and Power up 10ms Start up time 10ms constant resistive load Remote ON/OFF 24VDC input 10VDC Start-up voltage 48VDC input 18VDC 24VDC input 8VDC Shutdown voltage 16VDC 48VDC input Remote ON/OFF (Note 6) (Positive logic)(Standard) DC-DC ON Open or 3V < Vr < 12V DC-DC OFF Short or 0V < Vr < 1.2V (Negative logic)(Option) DC-DC ON Short or 0V < Vr < 1.2V DC-DC OFF Open or 3V < Vr < 12V Input current of remote control pin Nominal input -0.5mA ~ +0.5mA Remote off state input current Nominal input 3mA Input voltage range 24VDC nominal input 48VDC nominal input ENVIRONMENTAL SPECIFICATIONS Operating ambient temperature -40ºC ~ +85ºC (with derating) Maximum case temperature 100ºC Over temperature protection 115ºC. Storage temperature range -55ºC ~ +125ºC Thermal impedance Natural convection 10ºC/Watt (Note 7) Natural convection with heat-sink 8.24ºC/Watt Thermal shock MIL-STD-810F Vibration MIL-STD-810F Relative humidity 5% to 95% RH EMC CHARACTERISTICS EMI (Note 8) EN55022 ESD EN61000-4-2 Radiated immunity EN61000-4-3 Fast transient (Note 9) EN61000-4-4 Surge (Note 9) EN61000-4-5 Conducted immunity EN61000-4-6 www.pduke.com Class A, Class B Air Contact ± 8kV Perf. Criteria B ± 6kV 10 V/m Perf. Criteria A ± 2kV Perf. Criteria A ± 1kV Perf. Criteria B 10 Vr.m.s Perf. Criteria A 2014/4/30 FEC30W SERIES 30 WATTS Model Number Input Range Output Output Current Voltage Min. load Full load FEC30-24S1P5W FEC30-24S1P8W FEC30-24S2P5W FEC30-24S3P3W FEC30-24S05W FEC30-24S12W FEC30-24S15W FEC30-24D12W FEC30-24D15W FEC30-48S1P5W FEC30-48S1P8W FEC30-48S2P5W FEC30-48S3P3W FEC30-48S05W FEC30-48S12W FEC30-48S15W FEC30-48D12W FEC30-48D15W 10 ~ 40 VDC 10 ~ 40 VDC 10 ~ 40 VDC 10 ~ 40 VDC 10 ~ 40 VDC 10 ~ 40 VDC 10 ~ 40 VDC 10 ~ 40 VDC 10 ~ 40 VDC 18 ~ 75 VDC 18 ~ 75 VDC 18 ~ 75 VDC 18 ~ 75 VDC 18 ~ 75 VDC 18 ~ 75 VDC 18 ~ 75 VDC 18 ~ 75 VDC 18 ~ 75 VDC 1.5 VDC 1.8 VDC 2.5 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ±12VDC ±15VDC 1.5 VDC 1.8 VDC 2.5 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ±12VDC ±15VDC 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA DC-DC CONVERTER (2) (3) (4) Output Ripple & Noise No load Input Current Eff (%) 60mVp-p 60mVp-p 60mVp-p 60mVp-p 75mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 60mVp-p 60mVp-p 60mVp-p 60mVp-p 75mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 35mA 35mA 40mA 50mA 65mA 65mA 70mA 30mA 35mA 20mA 20mA 25mA 30mA 30mA 35mA 45mA 25mA 25mA 80 83 85 87 87 87 88 84 85 80 83 86 87 88 87 88 85 86 8000mA 8000mA 8000mA 6000mA 6000mA 2500mA 2000mA ±1250mA ±1000mA 8000mA 8000mA 8000mA 6000mA 6000mA 2500mA 2000mA ±1250mA ±1000mA (5) Capacitor Load max 65000µF 65000µF 33000µF 19500µF 10200µF 3300µF 1100µF ±1000µF ±680µF 65000µF 65000µF 33000µF 19500µF 10200µF 3300µF 1100µF ±1000µF ±680µF Note MIL-HDBK-217F @Ta=25 ºC, Full load. Typical value at nominal input and full load. (20MHZ BW.) Typical value at nominal input and no load. Typical value at nominal input and full load. Test by minimum input and constant resistive load. The CTRL pin voltage is referenced to -INPUT. To order negative logic ON-OFF control add the suffix-N (Ex: FEC30-24S05W-N). 7. Heat-sink is optional and P/N: 7G-0011C-F. 8. The FEC30W series standard module meets EN55022 Class A and Class B with external components. For more detail information, please contact with P-DUKE. 9. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220µF/100V. CAUTION: This power module is not internally fused. An input line fuse must always be used. FEC30-48S05W Derating Curve With Heatsink (Note 7 ) FEC30-48S05W Derating Curve 120 O U T P U T P O W E R (% ) O U T P U T P O W E R (% ) 1. 2. 3. 4. 5. 6. 100 80 60 40 20 0 -40 -20 0 20 40 60 59 80 100 120 100 80 60 40 20 0 120 -40 -20 0 AMBIENT TEMPERATURE(℃) FEC30-48S05W Efficiency VS Input Voltage E F F IC IE N C Y (% ) E F F IC IE N C Y (% ) 90 88 86 84 82 80 78 76 18 24 30 36 42 48 54 60 20 40 60 66 80 100 ℃ 120 AMBIENT TEMPERATURE( ) 66 72 95 90 85 80 75 70 65 60 55 50 45 FEC30-48S05W Efficiency VS Output Load 10 INPUT VOLTAGE (V) 20 30 40 50 60 70 80 90 100 OUTPUT LOAD (% of Full Load) Page 2 of 3 www.pduke.com 2014/4/30 FEC30W SERIES 30 WATTS DC-DC CONVERTER MECHANICAL DRAWING 1. All dimensions in Inch (mm) Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) 2. Pin pitch tolerance ±0.01(0.25) 3. Pin dimension tolerance ±0.004 (0.1) PIN CONNECTION PIN 1 2 4 5 6 7 8 Page 3 of 3 SINGLE + INPUT - INPUT CTRL NO PIN + OUTPUT - OUTPUT TRIM DUAL + INPUT - INPUT CTRL + OUTPUT COMMON - OUTPUT TRIM EXTERNAL OUTPUT TRIMMING Output can be externally trimmed by using the method shown below. ( ) FOR DUAL OUTPUT TRIM TRIM UP TRIM DOWN 8(8) 7(7) RU 8(8) www.pduke.com RD 6(5) 2014/4/30