ATMEL ATMEGA169A-MNR 8-bit atmel microcontroller with 16/32/64kb in-system programmable flash Datasheet

Atmel ATmega169A/PA/329A/PA/3290A/PA/649A/P/6490A/P
8-bit Atmel Microcontroller with 16/32/64KB In-System Programmable Flash
SUMMARY
Features
•
•
•
•
•
•
•
•
•
•
•
High performance, low power Atmel® AVR® 8-Bit Microcontroller
Advanced RISC architecture
– 130 powerful instructions – most single clock cycle execution
– 32 × 8 general purpose working registers
– Fully static operation
– Up to 16MIPS throughput at16MHz (Atmel ATmega169A/169PA/649A/649P)
– Up to 20 MIPS throughput at 20MHz (Atmel ATmega329A/329PA/3290A/3290PA/6490A/6490P)
– On-chip 2-cycle multiplier
High endurance non-volatile memory segments
– In-system self-programmable flash program memory
• 16Kbytes (Atmel ATmega169A/ATmega169PA)
• 32Kbytes (Atmel ATmega329A/ATmega329PA/ATmega3290A/ATmega3290PA)
• 64Kbytes (Atmel ATmega649A/ATmega649P/ATmega6490A/ATmega6490P)
– EEPROM
• 512bytes (ATmega169A/ATmega169PA)
• 1Kbytes (ATmega329A/ATmega329PA/ATmega3290A/ATmega3290PA)
• 2Kbytes (ATmega649A/ATmega649P/ATmega6490A/ATmega6490P)
– Internal SRAM
• 1Kbytes (ATmega169A/ATmega169PA)
• 2Kbytes (ATmega329A/ATmega329PA/ATmega3290A/ATmega3290PA)
• 4Kbytes (ATmega649A/ATmega649P/ATmega6490A/ATmega6490P)
– Write/erase cyles: 10,000 flash/100,000 EEPROM
– Data retention: 20 years at 85°C/100 years at 25°C (1)
– Optional Boot Code Section with Independent Lock Bits
• In-System Programming by On-chip Boot Program
• True read-while-write operation
– Programming lock for software security
Atmel QTouch® library support
– Capacitive touch buttons, sliders and wheels
– Atmel QTouch and QMatrix acquisition
– Up to 64 sense channels
JTAG (IEEE std. 1149.1 compliant) Interface
– Boundary-scan capabilities according to the JTAG standard
– Extensive on-chip debug support
– Programming of Flash, EEPROM, Fuses, and Lock Bits through the JTAG Interface
Peripheral features
– 4 × 25 segment LCD driver
(ATmega169A/ATmega169PA/ATmega329A/ATmega329PA/ATmega649A/ATmega649P)
– 4 × 40 segment LCD driver (ATmega3290A/ATmega3290PA/ATmega6490A/ATmega6490P)
– Two 8-bit Timer/Counters with Separate Prescaler and Compare mode
– One 16-bit Timer/Counter with Separate Prescaler, Compare mode, and Capture mode
– Real Time Counter with separate oscillator
– Four PWM channels
– 8-channel, 10-bit ADC
– Programmable Serial USART
– Master/Slave SPI Serial Interface
– Universal Serial Interface with Start Condition Detector
– Programmable Watchdog Timer with Separate On-chip oscillator
– On-chip analog comparator
– Interrupt and Wake-up on pin change
Special microcontroller features
– Power-on reset and programmable Brown-out detection
– Internal calibrated oscillator
– External and internal interrupt sources
– Five sleep modes: Idle, ADC Noise Reduction, Power-save, Power-down, and Standby
I/O and packages
– 54/69 programmable I/O lines
– 64/100-lead TQFP, 64-pad QFN/MLF, and 64-pad DRQFN
Speed Grade:
– ATmega169A/169PA/649A/649P:
• 0 - 16MHz @ 1.8 - 5.5V
– ATmega3290A/3290PA/6490A/6490P:
• 0 - 20MHz @ 1.8 - 5.5V
Temperature range:
– -40°C to 85°C industrial
Ultra-low power consumption (picoPower® devices)
– Active mode:
• 1MHz, 1.8V: 215µA
• 32kHz, 1.8V: 8µA (including oscillator)
• 32kHz, 1.8V: 25µA (including oscillator and LCD)
– Power-down mode:
• 0.1µA at 1.8V
– Power-save mode:
• 0.6µA at 1.8V (Including 32kHz RTC)
• 750nA at 1.8V
8284ES–AVR–02/2013
1. Pin configurations
Pinout - 64A (TQFP) and 64M1 (QFN/MLF)
LCDCAP
1
(RXD/PCINT0) PE0
2
GND
AREF
PF0 (ADC0)
PF1 (ADC1)
PF2 (ADC2)
PF3 (ADC3)
PF4 (ADC4/TCK)
PF5 (ADC5/TMS)
PF6 (ADC6/TDO)
PF7 (ADC7/TDI)
GND
VCC
PA0 (COM0)
PA1 (COM1)
PA2 (COM2)
63
62
61
60
59
58
57
56
55
54
53
52
51
50
49
Pinout Atmel ATmega169A/ATmega169PA/ATmega329A/ATmega329PA/ATmega649A/ATmega649P.
AVCC
Figure 1-1.
64
1.1
48 PA3 (COM3)
47 PA4 (SEG0)
INDEX CORNER
(SCK/PCINT9) PB1
11
38 PC3 (SEG9)
(MOSI/PCINT10) PB2
12
37 PC2 (SEG10)
(MISO/PCINT11) PB3
13
36 PC1 (SEG11)
(OC0A/PCINT12) PB4
14
35 PC0 (SEG12)
(OC1A/PCINT13) PB5
15
34 PG1 (SEG13)
(OC1B/PCINT14) PB6
16
33 PG0 (SEG14)
(SEG15) PD7 32
39 PC4 (SEG8)
(SEG16) PD6 31
10
(SEG17) PD5 30
(SS/PCINT8) PB0
29
40 PC5 (SEG7)
(SEG18) PD4
9
28
(CLKO/PCINT7) PE7
(SEG19) PD3
41 PC6 (SEG6)
27
8
(SEG20) PD2
(DO/PCINT6) PE6
26
42 PC7 (SEG5)
(INT0/SEG21) PD1
7
25
(DI/SDA/PCINT5) PE5
(ICP1/SEG22) PD0
43 PG2 (SEG4)
24
6
(TOSC1) XTAL1
(USCK/SCL/PCINT4) PE4
23
44 PA7 (SEG3)
(TOSC2) XTAL2
5
22
(AIN1/PCINT3) PE3
GND
45 PA6 (SEG2)
VCC 21
4
RESET/PG5 20
(XCK/AIN0/PCINT2) PE2
(T0/SEG23) PG4 19
46 PA5 (SEG1)
(T1/SEG24) PG3 18
3
(OC2A/PCINT15) PB7 17
(TXD/PCINT1) PE1
ATmega169A/PA/329A/PA/649A/P/3290A/PA/6490A/P [SUMMARY]
8284ES–AVR–02/2013
2
1.2
Pinout - 100A (TQFP)
Figure 1-2.
Pinout Atmel ATmega3290A/ATmega3290PA/ATmega6490A/ATmega6490P.
AVCC
AGND
AREF
PF0 (ADC0)
PF1 (ADC1)
PF2 (ADC2)
PF3 (ADC3)
PF4 (ADC4/TCK)
PF5 (ADC5/TMS)
PF6 (ADC6/TDO)
PF7 (ADC7/TDI)
DNC
DNC
PH7 (PCINT23/SEG36)
PH6 (PCINT22/SEG37)
PH5 (PCINT21/SEG38)
PH4 (PCINT20/SEG39)
DNC
DNC
GND
VCC
DNC
PA0 (COM0)
PA1 (COM1)
PA2 (COM2)
100
99
98
97
96
95
94
93
92
91
90
89
88
87
86
85
84
83
82
81
80
79
78
77
76
TQFP
LCDCAP
1
75
PA3 (COM3)
(RXD/PCINT0) PE0
2
74
PA4 (SEG0)
73
PA5 (SEG1)
INDEX CORNER
(TXD/PCINT1) PE1
3
(XCK/AIN0/PCINT2) PE2
4
72
PA6 (SEG2)
(AIN1/PCINT3) PE3
5
71
PA7 (SEG3)
(USCK/SCL/PCINT4) PE4
6
70
PG2 (SEG4)
(DI/SDA/PCINT5) PE5
7
69
PC7 (SEG5)
Note:
(DO/PCINT6) PE6
8
68
PC6 (SEG6)
(CLKO/PCINT7) PE7
9
67
DNC
VCC
10
66
PH3 (PCINT19/SEG7)
GND
11
65
PH2 (PCINT18/SEG8)
45
46
47
48
49
50
(SEG23) PD3
(SEG22) PD4
(SEG21) PD5
(SEG20) PD6
(SEG19) PD7
PG0 (SEG18)
44
51
(SEG24) PD2
25
(INT0/SEG25) PD1
(OC1B/PCINT14) PB6
43
PG1 (SEG17)
(ICP1/SEG26) PD0
52
42
24
DNC
PC0 (SEG16)
(OC1A/PCINT13) PB5
41
53
(PCINT30/SEG27) PJ6
23
40
PC1 (SEG15)
(OC0A/PCINT12) PB4
(PCINT29/SEG28) PJ5
54
(PCINT28/SEG29) PJ4
22
39
PC2 (SEG14)
(MISO/PCINT11) PB3
38
55
(PCINT27/SEG30) PJ3
21
37
PC3 (SEG13)
(MOSI/PCINT10) PB2
(PCINT26/SEG31) PJ2
(SCK/PCINT9) PB1
56
36
PC4 (SEG12)
20
DNC
57
35
19
DNC
PC5 (SEG11)
(SS/PCINT8) PB0
(TOSC1) XTAL1
58
34
18
33
DNC
DNC
(TOSC2) XTAL2
59
32
DNC
17
GND
60
DNC
31
DNC
30
DNC
16
VCC
61
RESET/PG5
15
29
DNC
DNC
(T0/SEG32) PG4
62
28
14
(T1/SEG33) PG3
PH0 (PCINT16/SEG10)
(PCINT25/SEG34) PJ1
27
PH1 (PCINT17/SEG9)
63
26
64
13
DNC
12
(OC2A/PCINT15) PB7
DNC
(PCINT24/SEG35) PJ0
The large center pad underneath the QFN/MLF packages is made of metal and internally connected to GND. It should be soldered or glued to the board to ensure good mechanical stability. If the center pad is left unconnected, the package might loosen
from the board.
ATmega169A/PA/329A/PA/649A/P/3290A/PA/6490A/P [SUMMARY]
8284ES–AVR–02/2013
3
Pinout - 64MC (DRQFN)
Pinout Atmel ATmega169A/ATmega169PA.
A4
A22
B4
B19
A21
A5
B5
B18
B6
A20
B17
A6
A7
A19
B16
A18
A34
B29
A33
B30
A31
B28
A32
B26
A30
B27
A3
B3
B20
A22
A4
B4
A5
B19
A21
B18
B5
A6
A20
B17
A19
B6
B16
B7
A7
A8
A18
A17
A16
B15
B8
A10
B9
A11
B10
A12
B11
A13
B12
A14
B13
A15
B14
A9
A2
A17
B15
B7
A8
B2
A23
A9
B3
A23
B20
B1
A10
B8
B21
B22
A24
B21
B10
A11
B9
B2
A3
A1
A25
A13
B11
A12
B22
A24
A16
B14
A15
A25
B1
A2
Table 1-1.
A26
A26
A1
B23
A27
B24
Bottom view
A27
B23
A34
B30
A33
B29
A32
B28
A31
B27
A30
B26
A29
B25
A28
B24
Top view
A28
B25
A29
Figure 1-3.
B13
A14
B12
1.3
DRQFN-64 Pinout ATmega169A/ATmega169PA.
A1
PE0
A9
PB7
A18
PG1 (SEG13)
A26
PA2 (COM2)
B1
VLCDCAP
B8
PB6
B16
PG0 (SEG14)
B23
PA3 (COM3)
A2
PE1
A10
PG3
A19
PC0 (SEG12)
A27
PA1 (COM1)
B2
PE2
B9
PG4
B17
PC1 (SEG11)
B24
PA0 (COM0)
A3
PE3
A11
RESET
A20
PC2 (SEG10)
A28
VCC
B3
PE4
B10
VCC
B18
PC3 (SEG9)
B25
GND
A4
PE5
A12
GND
A21
PC4 (SEG8)
A29
PF7
B4
PE6
B11
XTAL2 (TOSC2)
B19
PC5 (SEG7)
B26
PF6
A5
PE7
A13
XTAL1 (TOSC1)
A22
PC6 (SEG6)
A30
PF5
B5
PB0
B12
PD0 (SEG22)
B20
PC7 (SEG5)
B27
PF4
A6
PB1
A14
PD1 (SEG21)
A23
PG2 (SEG4)
A31
PF3
B6
PB2
B13
PD2 (SEG20)
B21
PA7 (SEG3)
B28
PF2
A7
PB3
A15
PD3 (SEG19)
A24
PA6 (SEG2)
A32
PF1
B7
PB5
B14
PD4 (SEG18)
B22
PA4 (SEG0)
B29
PF0
A8
PB4
A16
PD5 (SEG17)
A25
PA5 (SEG1)
A33
AREF
B15
PD7 (SEG15)
B30
AVCC
A17
PD6 (SEG16)
A34
GND
ATmega169A/PA/329A/PA/649A/P/3290A/PA/6490A/P [SUMMARY]
8284ES–AVR–02/2013
4
2. Overview
The Atmel ATmega169A/169PA/329A/329PA/3290A/3290PA/649A/649P/6490A/6490P is a low-power CMOS 8-bit microcontroller based on the Atmel®AVR® enhanced RISC architecture. By executing powerful instructions in a single clock
cycle, the ATmega169A/169PA/329A/329PA/3290A/3290PA/649A/649P/6490A/6490P achieves throughputs approaching
1 MIPS per MHz allowing the system designer to optimize power consumption versus processing speed.
Block diagram
GND
Block diagram.
PF0 - PF7
VCC
PA0 - PA7
DATA DIR.
REG. PORTF
DATA REGISTER
PORTF
PC0 - PC7
PORTA DRIVERS
PORTF DRIVERS
PORTC DRIVERS
DATA DIR.
REG. PORTA
DATA REGISTER
PORTA
XTAL2
Figure 2-1.
XTAL1
2.1
DATA REGISTER
PORTC
DATA DIR.
REG. PORTC
8-BIT DATA BUS
AVCC
AGND
CALIB. OSC
ADC
INTERNAL
OSCILLATOR
AREF
WATCHDOG
TIMER
ON-CHIP DEBUG
PROGRAM
FLASH
SRAM
MCU CONTROL
REGISTER
BOUNDARYSCAN
INSTRUCTION
REGISTER
TIMING AND
CONTROL
LCD
CONTROLLER/
DRIVER
TIMER/
COUNTERS
GENERAL
PURPOSE
REGISTERS
X
PROGRAMMING
LOGIC
INSTRUCTION
DECODER
CONTROL
LINES
+
-
INTERRUPT
UNIT
ALU
EEPROM
STATUS
REGISTER
AVR CPU
ANALOG
COMPARATOR
Z
Y
RESET
DATA DIR.
REG. PORTH
DATA REGISTER
PORTH
JTAG TAP
STACK
POINTER
DATA DIR.
REG. PORTJ
DATA REGISTER
PORTJ
PORTH DRIVERS
PORTJ DRIVERS
PJ0 - PJ6
PH0 - PH7
OSCILLATOR
PROGRAM
COUNTER
USART
UNIVERSAL
SERIAL INTERFACE
DATA REGISTER
PORTE
DATA DIR.
REG. PORTE
PORTE DRIVERS
PE0 - PE7
SPI
DATA REGISTER
PORTB
DATA DIR.
REG. PORTB
PORTB DRIVERS
PB0 - PB7
DATA REGISTER
PORTD
DATA DIR.
REG. PORTD
PORTD DRIVERS
PD0 - PD7
DATA REG.
PORTG
DATA DIR.
REG. PORTG
PORTG DRIVERS
PG0 - PG4
The AVR core combines a rich instruction set with 32 general purpose working registers. All the 32 registers are
directly connected to the Arithmetic Logic Unit (ALU), allowing two independent registers to be accessed in one
single instruction executed in one clock cycle. The resulting architecture is more code efficient while achieving
throughputs up to ten times faster than conventional CISC microcontrollers.
ATmega169A/PA/329A/PA/649A/P/3290A/PA/6490A/P [SUMMARY]
8284ES–AVR–02/2013
5
The Atmel ATmega169A/169PA/329A/329PA/3290A/3290PA/649A/649P/6490A/6490P provides the following features: 16K/32K/64K bytes of In-System Programmable Flash with Read-While-Write capabilities, 512/1K/2K bytes
EEPROM, 1K/2K/4K byte SRAM, 54/69 general purpose I/O lines, 32 general purpose working registers, a JTAG
interface for Boundary-scan, On-chip Debugging support and programming, a complete On-chip LCD controller
with internal contrast control, three flexible Timer/Counters with compare modes, internal and external interrupts, a
serial programmable USART, Universal Serial Interface with Start Condition Detector, an 8-channel, 10-bit ADC, a
programmable Watchdog Timer with internal Oscillator, an SPI serial port, and five software selectable power saving modes. The Idle mode stops the CPU while allowing the SRAM, Timer/Counters, SPI port, and interrupt system
to continue functioning. The Power-down mode saves the register contents but freezes the Oscillator, disabling all
other chip functions until the next interrupt or hardware reset. In Power-save mode, the asynchronous timer and
the LCD controller continues to run, allowing the user to maintain a timer base and operate the LCD display while
the rest of the device is sleeping. The ADC Noise Reduction mode stops the CPU and all I/O modules except asynchronous timer, LCD controller and ADC, to minimize switching noise during ADC conversions. In Standby mode,
the XTAL/resonator Oscillator is running while the rest of the device is sleeping. This allows very fast start-up combined with low-power consumption.
Atmel offers the QTouch library for embedding capacitive touch buttons, sliders and wheels functionality into AVR
microcontrollers. The patented charge-transfer signal acquisition offers robust sensing and includes fully
debounced reporting of touch keys and includes Adjacent Key Suppression® (AKS®) technology for unambiguous
detection of key events. The easy-to-use QTouch Suite toolchain allows you to explore, develop and debug your
own touch applications.
The device is manufactured using the Atmel high density non-volatile memory technology. The On-chip In-System
re-Programmable (ISP) Flash allows the program memory to be reprogrammed In-System through an SPI serial
interface, by a conventional non-volatile memory programmer, or by an On-chip Boot program running on the AVR
core. The Boot program can use any interface to download the application program in the Application Flash memory. Software in the Boot Flash section will continue to run while the Application Flash section is updated, providing
true Read-While-Write operation.
By combining an 8-bit RISC CPU with In-System Self-Programmable Flash on a monolithic chip, the
ATmega169A/169PA/329A/329PA/3290A/3290PA/649A/649P/6490A/6490P is a powerful microcontroller that provides a highly flexible and cost effective solution to many embedded control applications.
The ATmega169A/169PA/329A/329PA/3290A/3290PA/649A/649P/6490A/6490P AVR is supported with a full
suite of program and system development tools including: C Compilers, Macro Assemblers, Program Debugger/Simulators, In-Circuit Emulators, and Evaluation kits.
ATmega169A/PA/329A/PA/649A/P/3290A/PA/6490A/P [SUMMARY]
8284ES–AVR–02/2013
6
2.2
Comparison between Atmel
ATmega169A/169PA/329A/329PA/649A/649P/3290A/3290PA/6490A/6490P
Table 2-1.
Differences between: ATmega169A/169PA/329A/329PA/649A/649P/3290A/3290PA/6490A/6490P.
Device
Flash
EEPROM
RAM
LCD Segments
ATmega169A
16Kbyte
512Bytes
1Kbyte
4 × 25
ATmega169PA
16Kbyte
512Bytes
1Kbyte
4 × 25
ATmega329A
32Kbyte
1Kbyte
2Kbyte
4 × 25
ATmega329PA
32Kbyte
1Kbyte
2Kbyte
4 × 25
ATmega3290A
32Kbytes
1Kbyte
2Kbyte
4 × 40
ATmega3290PA
32Kbyte
1Kbyte
2Kbyte
4 × 40
ATmega649A
64Kbyte
2Kbyte
4Kbyte
4 × 25
ATmega649P
64Kbyte
2Kbyte
4Kbyte
4 × 25
ATmega6490A
64Kbyte
2Kbyte
4Kbyte
4 × 40
ATmega6490P
64Kbyte
2Kbyte
4Kbyte
4 × 40
ATmega169A/PA/329A/PA/649A/P/3290A/PA/6490A/P [SUMMARY]
8284ES–AVR–02/2013
7
2.3
Pin descriptions
The following section describes the I/O-pin special functions.
2.3.1
VCC
Digital supply voltage.
2.3.2
GND
Ground.
2.3.3
Port A (PA7...PA0)
Port A is an 8-bit bi-directional I/O port with internal pull-up resistors (selected for each bit). The Port A output buffers have symmetrical drive characteristics with both high sink and source capability. As inputs, Port A pins that are
externally pulled low will source current if the pull-up resistors are activated. The Port A pins are tri-stated when a
reset condition becomes active, even if the clock is not running.
Port A also serves the functions of various special features of the Atmel
ATmega169A/169PA/329A/329PA/3290A/3290PA/649A/649P/6490A/6490P as listed on page 73.
2.3.4
Port B (PB7...PB0)
Port B is an 8-bit bi-directional I/O port with internal pull-up resistors (selected for each bit). The Port B output buffers have symmetrical drive characteristics with both high sink and source capability. As inputs, Port B pins that are
externally pulled low will source current if the pull-up resistors are activated. The Port B pins are tri-stated when a
reset condition becomes active, even if the clock is not running.
Port B has better driving capabilities than the other ports.
Port B also serves the functions of various special features of the
ATmega169A/169PA/329A/329PA/3290A/3290PA/649A/649P/6490A/6490P as listed on page 74.
2.3.5
Port C (PC7...PC0)
Port C is an 8-bit bi-directional I/O port with internal pull-up resistors (selected for each bit). The Port C output buffers have symmetrical drive characteristics with both high sink and source capability. As inputs, Port C pins that are
externally pulled low will source current if the pull-up resistors are activated. The Port C pins are tri-stated when a
reset condition becomes active, even if the clock is not running.
Port C also serves the functions of special features of the
ATmega169A/169PA/329A/329PA/3290A/3290PA/649A/649P/6490A/6490P as listed on page 77.
2.3.6
Port D (PD7...PD0)
Port D is an 8-bit bi-directional I/O port with internal pull-up resistors (selected for each bit). The Port D output buffers have symmetrical drive characteristics with both high sink and source capability. As inputs, Port D pins that are
externally pulled low will source current if the pull-up resistors are activated. The Port D pins are tri-stated when a
reset condition becomes active, even if the clock is not running.
Port D also serves the functions of various special features of the
ATmega169A/169PA/329A/329PA/3290A/3290PA/649A/649P/6490A/6490P as listed on page 78.
2.3.7
Port E (PE7...PE0)
Port E is an 8-bit bi-directional I/O port with internal pull-up resistors (selected for each bit). The Port E output buffers have symmetrical drive characteristics with both high sink and source capability. As inputs, Port E pins that are
externally pulled low will source current if the pull-up resistors are activated. The Port E pins are tri-stated when a
reset condition becomes active, even if the clock is not running.
ATmega169A/PA/329A/PA/649A/P/3290A/PA/6490A/P [SUMMARY]
8284ES–AVR–02/2013
8
Port E also serves the functions of various special features of the
ATmega169A/169PA/329A/329PA/3290A/3290PA/649A/649P/6490A/6490P as listed on page 80.
2.3.8
Port F (PF7...PF0)
Port F serves as the analog inputs to the A/D Converter.
Port F also serves as an 8-bit bi-directional I/O port, if the A/D Converter is not used. Port pins can provide internal
pull-up resistors (selected for each bit). The Port F output buffers have symmetrical drive characteristics with both
high sink and source capability. As inputs, Port F pins that are externally pulled low will source current if the pull-up
resistors are activated. The Port F pins are tri-stated when a reset condition becomes active, even if the clock is not
running. If the JTAG interface is enabled, the pull-up resistors on pins PF7(TDI), PF5(TMS), and PF4(TCK) will be
activated even if a reset occurs.
Port F also serves the functions of the JTAG interface.
2.3.9
Port G (PG5...PG0)
Port G is a 6-bit bi-directional I/O port with internal pull-up resistors (selected for each bit). The Port G output buffers have symmetrical drive characteristics with both high sink and source capability. As inputs, Port G pins that are
externally pulled low will source current if the pull-up resistors are activated. The Port G pins are tri-stated when a
reset condition becomes active, even if the clock is not running.
Port G also serves the functions of various special features of the
ATmega169A/169PA/329A/329PA/3290A/3290PA/649A/649P/6490A/6490P as listed on page 84.
2.3.10
Port H (PH7...PH0)
Port H is a 8-bit bi-directional I/O port with internal pull-up resistors (selected for each bit). The Port H output buffers have symmetrical drive characteristics with both high sink and source capability. As inputs, Port H pins that are
externally pulled low will source current if the pull-up resistors are activated. The Port H pins are tri-stated when a
reset condition becomes active, even if the clock is not running.
Port H also serves the functions of various special features of the ATmega3290PA/6490P as listed on page 86.
2.3.11
Port J (PJ6...PJ0)
Port J is a 7-bit bi-directional I/O port with internal pull-up resistors (selected for each bit). The Port J output buffers
have symmetrical drive characteristics with both high sink and source capability. As inputs, Port J pins that are
externally pulled low will source current if the pull-up resistors are activated. The Port J pins are tri-stated when a
reset condition becomes active, even if the clock is not running.
Port J also serves the functions of various special features of the ATmega3290PA/6490P as listed on page 88.
2.3.12
RESET
Reset input. A low level on this pin for longer than the minimum pulse length will generate a reset, even if the clock
is not running. The minimum pulse length is given in ”System and reset characteristics” on page 334. Shorter
pulses are not guaranteed to generate a reset.
2.3.13
XTAL1
Input to the inverting Oscillator amplifier and input to the internal clock operating circuit.
2.3.14
XTAL2
Output from the inverting Oscillator amplifier.
ATmega169A/PA/329A/PA/649A/P/3290A/PA/6490A/P [SUMMARY]
8284ES–AVR–02/2013
9
2.3.15
AVCC
AVCC is the supply voltage pin for Port F and the A/D Converter. It should be externally connected to VCC, even if
the ADC is not used. If the ADC is used, it should be connected to VCC through a low-pass filter.
2.3.16
AREF
This is the analog reference pin for the A/D Converter.
2.3.17
LCDCAP
An external capacitor (typical > 470 nF) must be connected to the LCDCAP pin as shown in Figure 24-2, if the LCD
module is enabled and configured to use internal power. This capacitor acts as a reservoir for LCD power (VLCD). A
large capacitance reduces ripple on VLCD but increases the time until VLCD reaches its target value.
ATmega169A/PA/329A/PA/649A/P/3290A/PA/6490A/P [SUMMARY]
8284ES–AVR–02/2013
10
3. Resources
A comprehensive set of development tools, application notes and datasheets are available for download on
http://www.atmel.com/avr.
Note:
1.
4. Data retention
Reliability Qualification results show that the projected data retention failure rate is much less than 1 PPM over 20
years at 85°C or 100 years at 25°C.
5. About code examples
This documentation contains simple code examples that briefly show how to use various parts of the device. These
code examples assume that the part specific header file is included before compilation. Be aware that not all C
compiler vendors include bit definitions in the header files and interrupt handling in C is compiler dependent.
Please confirm with the C compiler documentation for more details.
For I/O Registers located in extended I/O map, “IN”, “OUT”, “SBIS”, “SBIC”, “CBI”, and “SBI” instructions must be
replaced with instructions that allow access to extended I/O. Typically “LDS” and “STS” combined with “SBRS”,
“SBRC”, “SBR”, and “CBR”.
6. Capacitive touch sensing
The Atmel® QTouch® Library provides a simple to use solution to realize touch sensitive interfaces on most Atmel
AVR® microcontrollers. The QTouch Library includes support for the QTouch and QMatrix® acquisition methods.
Touch sensing can be added to any application by linking the appropriate Atmel QTouch Library for the AVR Microcontroller. This is done by using a simple set of APIs to define the touch channels and sensors, and then calling the
touch sensing API’s to retrieve the channel information and determine the touch sensor states.
The QTouch Library is FREE and downloadable from the Atmel website at the following location:
www.atmel.com/qtouchlibrary. For implementation details and other information, refer to the Atmel QTouch Library
User Guide - also available for download from the Atmel website.
ATmega169A/PA/329A/PA/649A/P/3290A/PA/6490A/P [SUMMARY]
8284ES–AVR–02/2013
11
7. Ordering information
7.1
Atmel ATmega169A
Speed [MHz] (3)
16
Notes:
Power supply
1.8 - 5.5V
Ordering code (2)
Package type (1)
ATmega169A-AU
ATmega169A-AUR (4)
ATmega169A-MU
ATmega169A-MUR (4)
ATmega169A-MCH
ATmega169A-MCHR (4)
64A
64A
64M1
64M1
64MC
64MC
ATmega169A-AN
ATmega169A-ANR (4)
ATmega169A-MN
ATmega169A-MNR (4)
64A
64A
64M1
64M1
Operational range
Industrial
(-40C to 85C)
Extended
(-40C to 105C)
1. This device can also be supplied in wafer form. Please contact your local Atmel sales office for detailed ordering information
and minimum quantities.
2. Pb-free packaging, complies to the European Directive for Restriction of Hazardous Substances (RoHS directive). Also
Halide free and fully Green.
3. For Speed vs. VCC, see Figure 29-1 on page 332.
4. Tape & Reel.
Package type
64A
64-lead, thin (1.0mm) plastic Gull Wing Quad Flat Package (TQFP)
64M1
64-pad, 9 × 9 × 1.0mm body, lead pitch 0.50mm, Quad Flat No-Lead/Micro Lead Frame Package (QFN/MLF)
64MC
64-lead (2-row Staggered), 7 × 7 × 1.0mm body, 4.0 × 4.0 mm Exposed Pad, Quad Flat No-Lead Package (QFN)
ATmega169A/PA/329A/PA/649A/P/3290A/PA/6490A/P [SUMMARY]
8284ES–AVR–02/2013
12
7.2
Atmel ATmega169PA
Speed [MHz] (3)
16
Notes:
Power supply
Ordering code (2)
Package type(1)
64A
64A
64M1
64M1
64MC
64MC
Industrial
(-40C to 85C)
1.8 - 5.5V
ATmega169PA-AU
ATmega169PA-AUR(4)
ATmega169PA-MU
ATmega169PA-MUR(4)
ATmega169PA-MCH
ATmega169PA-MCHR(4)
ATmega169PA-AN
ATmega169PA-ANR(4)
ATmega169PA-MN
ATmega169PA-MNR(4)
64A
64A
64M1
64M1
Extended
(-40C to 105C)(5)
Operational range
1. This device can also be supplied in wafer form. Please contact your local Atmel sales office for detailed ordering information
and minimum quantities.
2. Pb-free packaging, complies to the European Directive for Restriction of Hazardous Substances (RoHS directive). Also
Halide free and fully Green.
3. For Speed vs. VCC, see Figure 29-1 on page 332.
4. Tape & Reel.
5. See characterization specification at 105°C.
Package type
64A
64-lead, thin (1.0mm) plastic Gull Wing Quad Flat Package (TQFP)
64M1
64-pad, 9 × 9 × 1.0mm body, lead pitch 0.50mm, Quad Flat No-Lead/Micro Lead Frame Package (QFN/MLF)
64MC
64-lead (2-row Staggered), 7 × 7 × 1.0mm body, 4.0 × 4.0mm Exposed Pad, Quad Flat No-Lead Package (QFN)
ATmega169A/PA/329A/PA/649A/P/3290A/PA/6490A/P [SUMMARY]
8284ES–AVR–02/2013
13
7.3
Atmel ATmega329A
Speed [MHz] (3)
20
Notes:
Power supply
1.8 - 5.5V
Ordering code (2)
Package type (1)
Operational range
ATmega329A-AU
ATmega329A-AUR (4)
ATmega329A-MU
ATmega329A-MUR (4)
64A
64A
64M1
64M1
Industrial
(-40C to 85C)
ATmega329A-AN
ATmega329A-ANR (4)
ATmega329A-MN
ATmega329A-MNR (4)
64A
64A
64M1
64M1
Extended
(-40C to 105C)(5)
1. This device can also be supplied in wafer form. Please contact your local Atmel sales office for detailed ordering information
and minimum quantities.
2. Pb-free packaging complies to the European Directive for Restriction of Hazardous Substances (RoHS directive). Also
Halide free and fully Green.
3. For Speed vs. VCC see Figure 29-2 on page 332.
4. Tape & Reel.
5. See characterization specifications at 105°C.
Package type
64A
64-lead, 14 × 14 × 1.0mm, thin profile plastic Quad Flat Package (TQFP)
64M1
64-pad, 9 × 9 × 1.0mm, Quad Flat No-Lead/Micro Lead Frame Package (QFN/MLF)
ATmega169A/PA/329A/PA/649A/P/3290A/PA/6490A/P [SUMMARY]
8284ES–AVR–02/2013
14
7.4
Atmel ATmega329PA
Speed [MHz] (3)
20
Notes:
Power supply
1.8 - 5.5V
Ordering code (2)
Package type (1)
Operational range
ATmega329PA-AU
ATmega329PA-AUR(4)
ATmega329PA-MU
ATmega329PA-MUR(4)
64A
64A
64M1
64M1
Industrial
(-40C to 85C)
ATmega329PA-AN
ATmega329PA-ANR(4)
ATmega329PA-MN
ATmega329PA-MNR(4)
64A
64A
64M1
64M1
Extended
(-40C to 105C)(5)
1. This device can also be supplied in wafer form. Please contact your local Atmel sales office for detailed ordering information
and minimum quantities.
2. Pb-free packaging complies to the European Directive for Restriction of Hazardous Substances (RoHS directive). Also
Halide free and fully Green.
3. For Speed vs. VCC see Figure 29-2 on page 332.
4. Tape &Reel.
5. See characterization specification at 105°C.
Package type
64A
64-lead, 14 × 14 × 1.0mm, thin profile Plastic Quad Flat Package (TQFP)
64M1
64-pad, 9 × 9 × 1.0mm, Quad Flat No-Lead/Micro Lead Frame Package (QFN/MLF)
ATmega169A/PA/329A/PA/649A/P/3290A/PA/6490A/P [SUMMARY]
8284ES–AVR–02/2013
15
7.5
Atmel ATmega3290A
Speed [MHz] (3)
20
Notes:
Power supply
1.8 - 5.5V
Ordering code (2)
Package type (1)
Operational range
ATmega3290A-AU
ATmega3290A-AUR (4)
100A
100A
Industrial
(-40C to 85C)
ATmega3290A-AN
ATmega3290A-ANR (4)
100A
100A
Extended
(-40C to 105C)(5)
1. This device can also be supplied in wafer form. Please contact your local Atmel sales office for detailed ordering information
and minimum quantities.
2. Pb-free packaging complies to the European Directive for Restriction of Hazardous Substances (RoHS directive). Also
Halide free and fully Green.
3. For Speed vs. VCC see Figure 29-2 on page 332.
4. Tape & Reel.
5. See characterization specification at 105°C.
Package type
100A
100-lead, 14 × 14 × 1.0mm, 0.5mm Lead Pitch, Thin Profile Plastic Quad Flat Package (TQFP)
ATmega169A/PA/329A/PA/649A/P/3290A/PA/6490A/P [SUMMARY]
8284ES–AVR–02/2013
16
7.6
Atmel ATmega3290PA
Speed [MHz] (3)
20
Notes:
Power supply
1.8 - 5.5V
Ordering code (2)
Package type (1)
Operational range
ATmega3290PA-AU
ATmega3290PA-AUR(4)
100A
100A
Industrial
(-40C to 85C)
ATmega3290PA-AN
ATmega3290PA-ANR(4)
100A
100A
Industrial
(-40C to 105C)(5)
1. This device can also be supplied in wafer form. Please contact your local Atmel sales office for detailed ordering information
and minimum quantities.
2. Pb-free packaging complies to the European Directive for Restriction of Hazardous Substances (RoHS directive). Also
Halide free and fully Green.
3. For Speed vs. VCC see Figure 29-2 on page 332.
4. Tape & Reel.
5. See characterization specification at 105°C.
Package type
100A
100-lead, 14 × 14 × 1.0mm, 0.5mm Lead Pitch, Thin Profile Plastic Quad Flat Package (TQFP)
ATmega169A/PA/329A/PA/649A/P/3290A/PA/6490A/P [SUMMARY]
8284ES–AVR–02/2013
17
7.7
Atmel ATmega649A
Speed [MHz] (3)
16
Notes:
Power supply
1.8 - 5.5V
Ordering code (2)
ATmega649A-AU
ATmega649A-AUR (4)
ATmega649A-MU
ATmega649A-MUR (4)
Package type (1)
64A
64A
64M1
64M1
Operational range
Industrial
(-40C to 85C)
1. This device can also be supplied in wafer form. Please contact your local Atmel sales office for detailed ordering information
and minimum quantities.
2. Pb-free packaging complies to the European Directive for Restriction of Hazardous Substances (RoHS directive). Also
Halide free and fully Green.
3. For Speed vs. VCC see Figure 29-1 on page 332.
4. Tape & Reel.
Package type
64A
64-lead, 14 × 14 × 1.0mm, Thin Profile Plastic Quad Flat Package (TQFP)
64M1
64-pad, 9 × 9 × 1.0mm, Quad Flat No-Lead/Micro Lead Frame Package (QFN/MLF)
ATmega169A/PA/329A/PA/649A/P/3290A/PA/6490A/P [SUMMARY]
8284ES–AVR–02/2013
18
7.8
Atmel ATmega649P
Speed [MHz] (3)
16
Notes:
Power supply
1.8 - 5.5 V
Ordering code (2)
ATmega649P-AU
ATmega649P-AUR (4)
ATmega649P-MU
ATmega649P-MUR (4)
Package type (1)
64A
64A
64M1
64M1
Operational range
Industrial
(-40C to 85C)
1. This device can also be supplied in wafer form. Please contact your local Atmel sales office for detailed ordering information
and minimum quantities.
2. Pb-free packaging complies to the European Directive for Restriction of Hazardous Substances (RoHS directive). Also
Halide free and fully Green.
3. For Speed vs. VCC see Figure 29-1 on page 332.
4. Tape & Reel.
Package type
64A
64-lead, 14 × 14 × 1.0mm, Thin Profile Plastic Quad Flat Package (TQFP)
64M1
64-pad, 9 × 9 × 1.0mm, Quad Flat No-Lead/Micro Lead Frame Package (QFN/MLF)
ATmega169A/PA/329A/PA/649A/P/3290A/PA/6490A/P [SUMMARY]
8284ES–AVR–02/2013
19
7.9
Atmel ATmega6490A
Speed [MHz] (3)
20
Notes:
Power supply
1.8 - 5.5V
Ordering code (2)
ATmega6490A-AU
ATmega6490A-AUR (4)
Package type (1)
100A
100A
Operational range
Industrial
(-40C to 85C)
1. This device can also be supplied in wafer form. Please contact your local Atmel sales office for detailed ordering information
and minimum quantities.
2. Pb-free packaging complies to the European Directive for Restriction of Hazardous Substances (RoHS directive). Also
Halide free and fully Green.
3. For Speed vs. VCC see Figure 29-2 on page 332.
4. Tape & Reel.
Package type
100A
100-lead, 14 × 14 × 1.0mm, 0.5mm Lead Pitch, Thin Profile Plastic Quad Flat Package (TQFP)
ATmega169A/PA/329A/PA/649A/P/3290A/PA/6490A/P [SUMMARY]
8284ES–AVR–02/2013
20
7.10
Atmel ATmega6490P
Speed [MHz] (3)
20
Notes:
Power supply
1.8 - 5.5V
Ordering code (2)
ATmega6490P-AU
ATmega6490P-AUR (4)
Package type (1)
100A
100A
Operational range
Industrial
(-40C to 85C)
1. This device can also be supplied in wafer form. Please contact your local Atmel sales office for detailed ordering information
and minimum quantities.
2. Pb-free packaging complies to the European Directive for Restriction of Hazardous Substances (RoHS directive). Also
Halide free and fully Green.
3. For Speed vs. VCC see Figure 29-2 on page 332.
4. Tape & Reel.
Package Type
100A
100-lead, 14 × 14 × 1.0mm, 0.5mm Lead Pitch, Thin Profile Plastic Quad Flat Package (TQFP)
ATmega169A/PA/329A/PA/649A/P/3290A/PA/6490A/P [SUMMARY]
8284ES–AVR–02/2013
21
8. Packaging Information
8.1
64A
PIN 1
B
PIN 1
e
B
PIN 1 IDENTIFIER
e
PIN 1 IDENTIFIER
E1
E
E1
E
D1
D1
DD
C C 0°~7°
0°~7°
A1
A1
A2
A2
AA
LL
COMMON
DIMENSIONS
COMMON
DIMENSIONS
(Unit
of of
measure
= mm)
(Unit
measure
= mm)
SYMBOL
MIN
SYMBOL MIN
–
–
–
A1
0.05
–
A2
0.95
1.00
1.05
D
15.75
16.00
16.25
D1
13.90
14.00
14.10
E
15.75
16.00
16.25
A
A1
A2
D
D1
Notes:
E
Notes: 1.This package conforms to JEDEC reference MS-026, Variation AEB.
1.This
package conforms
to do
JEDEC
reference
Variation
AEB.
2. Dimensions
D1 and E1
not include
moldMS-026,
protrusion.
Allowable
2. Dimensions
and E1 do
include
mold protrusion.
Allowable
protrusionD1
is 0.25mm
pernot
side.
Dimensions
D1 and E1 are
maximum
protrusion
is 0.25mm
per side. Dimensions
D1mismatch.
and E1 are maximum
plastic body
size dimensions
including mold
3. Leadbody
coplanarity
is 0.10mmincluding
maximum.mold mismatch.
plastic
size dimensions
3. Lead coplanarity is 0.10mm maximum.
NOM
MAX NOTE
NOTE
NOM MAX
A
E1
E1
B
B
0.05
0.95
15.75
13.90
15.75
13.90
0.09
0.45
eL
e
0.15
1.05
14.00
16.00
14.00
16.25
–
Note 2
16.25
14.10
14.00
–
Note 2
14.10
–
0.30
0.09
–
16.00
13.90
C
L
1.20
0.15
1.00
0.30
C
1.20
–
Note 2
14.10
0.45
Note 2
0.45
0.20
–
–
0.45 0.80 TYP
–
0.20
0.75
0.75
0.80 TYP
2010-10-20
TITLE
2325 Orchard Parkway
TITLE
64A, 64-lead, 14 x 14mm Body Size, 1.0mm Body Thickness,
San
Jose, CA
95131
2325
Orchard
Parkway
0.8mm
Lead Pitch,
Thin Profile
Quad Flat
Package
(TQFP)
64A,
64-lead,
14 x 14mm
BodyPlastic
Size, 1.0mm
Body
Thickness,
San Jose, CA 95131
0.8mm Lead Pitch, Thin Profile Plastic Quad Flat Package (TQFP)
DRAWING NO.2010-10-20
REV.
DRAWING NO.
64A
64A
ATmega169A/PA/329A/PA/649A/P/3290A/PA/6490A/P [SUMMARY]
8284ES–AVR–02/2013
REV.
C
C
22
8.2
64M1
D
D
Marked Pin# 1 ID
Marked Pin# 1 ID
E
E
SEATING PLANE
CSEATING
PLANE
C
A1
A1
TOP
VIEW
TOP
VIEW
AA
KK
0.08 C C
0.08
L L
Pin
Pin #1
#1 Corner
Corner
D2
D2
11
22
33
Option A
Option
SIDEVIEW
VIEW
SIDE
Pin
Pin#1
#1
Triangle
Triangle
COMMON
DIMENSIONS
COMMON
DIMENSIONS
(Unit
of of
Measure
= mm)
(Unit
Measure
= mm)
SYMBOL
MIN
SYMBOL MIN
E2E2
Option B
Option B
Pin #1
Pin #1
Chamfer
Chamfer
(C
0.30)
(C 0.30)
NOM
NOM
MAX
MAX NOTE
NOTE
A
A
0.80
0.80
0.90
1.00
A1
–
0.02
0.05
A1
K
b
b
Option C
e
e
Pin #1
Notch
Pin #1
(0.20
NotchR)
(0.20 R)
BOTTOM VIEW
0.30
D
8.90
9.00
9.10
D2
5.20
5.40
5.60
E
8.90
9.00
9.10
D2
E
E2
0.18
8.90
5.20
8.90
5.20
E2
e
L
L
K
Notes:
Notes:
1. JEDEC Standard MO-220, (SAW Singulation) Fig. 1, VMMD.
0.05
0.25
5.20
e
BOTTOM VIEW
0.02
0.18
D
Option C
1.00
b
b
K
–
0.90
0.35
0.35
1.25
K
1.25
0.25
0.30
9.00
9.10
5.40
5.60
9.00
9.10
5.40
5.60
5.40
5.60
0.50 BSC
0.50 BSC
0.40
0.40
0.45
0.45
1.40
1.55
1.40
1.55
2. Dimension
and MO-220,
tolerance (SAW
conform
to ASMEY14.5M-1994.
1. JEDEC
Standard
Singulation)
Fig. 1, VMMD.
2. Dimension and tolerance conform to ASMEY14.5M-1994.
TITLE
2325 Orchard Parkway
64M1, 64-pad, 9 x 9 x 1.0 mm Body, Lead Pitch 0.50 mm,
TITLE
SanOrchard
Jose, CA
95131
2325
Parkway
5.40 mm Exposed Pad, Micro Lead Frame Package (MLF)
R
R
San Jose, CA 95131
64M1, 64-pad, 9 x 9 x 1.0 mm Body, Lead Pitch 0.50 mm,
5.40 mm Exposed Pad, Micro Lead Frame Package (MLF)
2010-10-19
2010-10-19
DRAWING NO.
REV.
DRAWING
64M1 NO. HREV.
64M1
H
ATmega169A/PA/329A/PA/649A/P/3290A/PA/6490A/P [SUMMARY]
8284ES–AVR–02/2013
23
64MC
C
Pin 1 ID
D
SIDE VIEW
y
A1
E
A
TOP VIEW
eT
eT/2
L
A26
eR
8.3
A34
B23
B30
COMMON DIMENSIONS
(Unit of Measure = mm)
A1
A25
B1
B22
R0.20
0.40
b
D2
SYMBOL
MIN
NOM
MAX
A
0.80
0.90
1.00
A1
0.00
0.02
0.05
b
0.18
0.23
0.28
C
eT
B7
B16
A8
A18
A9
A17
L
(0.18) REF
B8
B15
E2
K
BOTTOM VIEW
Note:
1. The terminal #1 ID is a Laser-marked Feature.
Package Drawing Contact:
[email protected]
(0.1) REF
NOTE
0.20 REF
D
6.90
7.00
7.10
D2
3.95
4.00
4.05
E
6.90
7.00
7.10
E2
3.95
4.00
4.05
eT
–
0.65
–
eR
–
0.65
–
K
0.20
–
–
L
0.35
0.40
0.45
y
0.00
–
0.075
GPC
TITLE
64MC, 64QFN (2-Row Staggered),
ZXC
7 x 7 x 1.00 mm Body, 4.0 x 4.0 mm Exposed Pad,
Quad Flat No Lead Package
(REF)
10/3/07
DRAWING NO. REV.
64MC
ATmega169A/PA/329A/PA/649A/P/3290A/PA/6490A/P [SUMMARY]
8284ES–AVR–02/2013
A
24
8.4
100A
PIN 1
B
PIN 1 IDENTIFIER
E1
e
E
D1
D
C
0°~7°
A1
A2
A
L
COMMON DIMENSIONS
(Unit of Measure = mm)
SYMBOL
Notes:
1. This package conforms to JEDEC reference MS-026, Variation AED.
2. Dimensions D1 and E1 do not include mold protrusion. Allowable
protrusion is 0.25mm per side. Dimensions D1 and E1 are maximum
plastic body size dimensions including mold mismatch.
3. Lead coplanarity is 0.08mm maximum.
MIN
NOM
MAX
A
–
–
1.20
A1
0.05
–
0.15
A2
0.95
1.00
1.05
D
15.75
16.00
16.25
D1
13.90
14.00
14.10
E
15.75
16.00
16.25
E1
13.90
14.00
14.10
B
0.17
–
0.27
C
0.09
–
0.20
L
0.45
–
0.75
e
NOTE
Note 2
Note 2
0.50 TYP
2010-10-20
R
2325 Orchard Parkway
San Jose, CA 95131
DRAWING NO.
TITLE
100A, 100-lead, 14 x 14mm Body Size, 1.0mm Body Thickness,
0.5mm Lead Pitch, Thin Profile Plastic Quad Flat Package (TQFP)
100A
REV.
D
ATmega169A/PA/329A/PA/649A/P/3290A/PA/6490A/P [SUMMARY]
8284ES–AVR–02/2013
25
9. Errata
9.1
Atmel ATmega169A
No known errata
9.2
Atmel ATmega169A/169PA Rev. A to F
Not sampled.
9.3
Atmel ATmega169PA Rev. G
No known errata.
9.4
Atmel ATmega329A/329PA rev. A
• Interrupts may be lost when writing the timer registers in the asynchronous timer
• Using BOD disable will make the chip reset
1. Interrupts may be lost when writing the timer registers in the asynchronous timer
The interrupt will be lost if a timer register that is synchronous timer clock is written when the asynchronous
Timer/Counter register (TCNTx) is 0x00.
Problem Fix/ Workaround
Always check that the asynchronous Timer/Counter register neither have the value 0xFF nor 0x00 before writing to the asynchronous Timer Control Register (TCCRx), asynchronous Timer Counter Register (TCNTx), or
asynchronous Output Compare Register (OCRx).
2. Using BOD disable will make the chip reset
If the part enters sleep with the BOD turned off with the BOD disable option
enabled, a BOD reset will be generated at wakeup and the chip will reset.
Problem Fix/Workaround
Do not use BOD disable
9.5
Atmel ATmega329A/329PA rev. B
• Interrupts may be lost when writing the timer registers in the asynchronous timer
1. Interrupts may be lost when writing the timer registers in the asynchronous timer
The interrupt will be lost if a timer register that is synchronous timer clock is written when the asynchronous
Timer/Counter register (TCNTx) is 0x00.
Problem Fix/ Workaround
Always check that the asynchronous Timer/Counter register neither have the value 0xFF nor 0x00 before writing to the asynchronous Timer Control Register (TCCRx), asynchronous Timer Counter Register (TCNTx), or
asynchronous Output Compare Register (OCRx).
ATmega169A/PA/329A/PA/649A/P/3290A/PA/6490A/P [SUMMARY]
8284ES–AVR–02/2013
26
9.6
Atmel ATmega329A/329PA rev. C
• Interrupts may be lost when writing the timer registers in the asynchronous timer
1. Interrupts may be lost when writing the timer registers in the asynchronous timer
The interrupt will be lost if a timer register that is synchronous timer clock is written when the asynchronous
Timer/Counter register (TCNTx) is 0x00.
Problem Fix/ Workaround
Always check that the asynchronous Timer/Counter register neither have the value 0xFF nor 0x00 before writing to the asynchronous Timer Control Register (TCCRx), asynchronous Timer Counter Register (TCNTx), or
asynchronous Output Compare Register (OCRx).
9.7
Atmel ATmega3290A/3290PA rev. A
• Interrupts may be lost when writing the timer registers in the asynchronous timer
• Using BOD disable will make the chip reset
1. Interrupts may be lost when writing the timer registers in the asynchronous timer
The interrupt will be lost if a timer register that is synchronous timer clock is written when the asynchronous
Timer/Counter register (TCNTx) is 0x00.
Problem Fix/ Workaround
Always check that the asynchronous Timer/Counter register neither have the value 0xFF nor 0x00 before writing to the asynchronous Timer Control Register (TCCRx), asynchronous Timer Counter Register (TCNTx), or
asynchronous Output Compare Register (OCRx).
2. Using BOD disable will make the chip reset
If the part enters sleep with the BOD turned off with the BOD disable option
enabled, a BOD reset will be generated at wakeup and the chip will reset.
Problem Fix/Workaround
Do not use BOD disable
9.8
Atmel ATmega3290A/3290PA rev. B
• Interrupts may be lost when writing the timer registers in the asynchronous timer
1. Interrupts may be lost when writing the timer registers in the asynchronous timer
The interrupt will be lost if a timer register that is synchronous timer clock is written when the asynchronous
Timer/Counter register (TCNTx) is 0x00.
Problem Fix/ Workaround
Always check that the asynchronous Timer/Counter register neither have the value 0xFF nor 0x00 before writing to the asynchronous Timer Control Register (TCCRx), asynchronous Timer Counter Register (TCNTx), or
asynchronous Output Compare Register (OCRx).
ATmega169A/PA/329A/PA/649A/P/3290A/PA/6490A/P [SUMMARY]
8284ES–AVR–02/2013
27
9.9
Atmel ATmega3290A/3290PA rev. C
• Interrupts may be lost when writing the timer registers in the asynchronous timer
1. Interrupts may be lost when writing the timer registers in the asynchronous timer
The interrupt will be lost if a timer register that is synchronous timer clock is written when the asynchronous
Timer/Counter register (TCNTx) is 0x00.
Problem Fix/ Workaround
Always check that the asynchronous Timer/Counter register neither have the value 0xFF nor 0x00 before writing to the asynchronous Timer Control Register (TCCRx), asynchronous Timer Counter Register (TCNTx), or
asynchronous Output Compare Register (OCRx).
9.10
Atmel ATmega649A/649P/ATmega6490A/6490P
No known errata.
ATmega169A/PA/329A/PA/649A/P/3290A/PA/6490A/P [SUMMARY]
8284ES–AVR–02/2013
28
Atmel Corporation
1600 Technology Drive
Atmel Asia Limited
Unit 01-5 & 16, 19F
Atmel Munich GmbH
Business Campus
Atmel Japan G.K.
16F Shin-Osaki Kangyo Bldg
San Jose, CA 95110
BEA Tower, Millennium City 5
Parkring 4
1-6-4 Osaki, Shinagawa-ku
USA
418 Kwun Tong Roa
D-85748 Garching b. Munich
Tokyo 141-0032
Tel: (+1) (408) 441-0311
Kwun Tong, Kowloon
GERMANY
JAPAN
Fax: (+1) (408) 487-2600
HONG KONG
Tel: (+49) 89-31970-0
Tel: (+81) (3) 6417-0300
www.atmel.com
Tel: (+852) 2245-6100
Fax: (+49) 89-3194621
Fax: (+81) (3) 6417-0370
Fax: (+852) 2722-1369
© 2013 Atmel Corporation. All rights reserved. / Rev.: 8284ES–AVR–02/2013
Atmel®, Atmel logo and combinations thereof, Enabling Unlimited Possibilities®, and others are registered trademarks or trademarks of Atmel Corporation or its
subsidiaries. Other terms and product names may be trademarks of others.
Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this
document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN THE ATMEL TERMS AND CONDITIONS OF SALES LOCATED ON THE ATMEL WEBSITE, ATMEL ASSUMES
NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS AND PROFITS, BUSINESS INTERRUPTION, OR LOSS OF
INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no
representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and products descriptions at any time
without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall not be used in,
automotive applications. Atmel products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life.
Similar pages