Bourns AMS22U5A1CHAFL101 Non-contacting analog rotary position sensor Datasheet

*R
oH
S
CO
M
PL
IA
N
T
Features
■ Non-contacting magnetic technology
■ Dual ball bearing
■ Highly resistant to vibration/shock
■ RoHS compliant*
■ Highly resistant to fluid/dust ingress
■ Programmable at factory for zero position
■ Robust design for industrial applications
■ Highly repeatable
AMS22U Non-Contacting Analog Rotary Position Sensor
Electrical Characteristics1 (@ 25 °C)
Product Dimensions
VDD Supply Voltage ..................................................................................................5 V ± 10 %
Supply Current 2
For Low Speed Processing (Code L) ................................................................... 10 mA max.
For High Speed Processing (Code H) ................................................................. 20 mA max.
Output Signal (Single) ..................................................................................................... Analog
Independent Linearity ...................................................................................................... ±0.5 %
(±0.3 % available on request)
Hysteresis .........................................................................................................0.2 % VDD max.
Effective Electrical Angle 3 .................................................................................................. 340 °
Programmable Electrical Angle .................................................. 10 ° to 360 ° (10 ° increments)
Voltage Output (Programmable) ................................................................ 1 to 99 % VDD ±1 %
Output Resolution .................................................................................................12 bit @ 360 °
Load Resistance Recommended ....................................................................... 10K ohms to ∞
Overvoltage Protection .................................................................................................+20 VDC
Reverse Voltage Protection ...........................................................................................-10 VDC
19.69
MAX. DIA.
(.775)
DIMENSIONS:
19.05 +.000/-.025
(.750 +.000/-.001)
3.167 +.000/-.025
DIA.
(.1247 +.000/-.001)
1.57 ± 0.10
(.062 ± .004)
1.57 ± 0.10
(.062 ± .004)
1.57 ± 0.10
(.062 ± .004)
19.69
(.775)
MAX.
DIA. 22.23
(.875)
DIA.
Environmental Characteristics
Operating Temperature......................................................................................-40 ° to +125 °C
Moisture Resistance .........................................................................MIL-STD-202, Method 106
Insulation Resistance @ 500 VAC..........................................................................500 MΩ min.
Rotational Life (Shaft Revolutions) ............................................................................ 100 million
Vibration ..............................................................................................................................15 G
Shock...................................................................................................................................50 G
IP Rating .............................................................................................................................. IP50
ESD Safe .................................................................................................................... 2 kV max.
12.7 ± 0.76
(.500 ± .030)
15.62
(.615)
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as
2 See “Processing Speed” in How to Order selection guide.
3 Other Effective Electrical Angles available. See How to Order selection guide.
0.51
3 PLCS.
(.020)
4.06 ± 0.38
(.160 ± .015)
3 PLCS.
2.67 +.000/-.076
(.105 +.000/-.003) DIA.
3.18 +.000/-.025
DIA.
(.125 +.000/-.001)
FLATTED
OPTION
7.80
MIN.
(.307)
Mechanical Characteristics (@ 25 °C)
Mechanical Angle ..................................................................................................... Continuous
Shaft/RPM .........................................................................................................1000 RPM max.
Torque (Starting & Running) ...........................................................1.06 N-cm. (1.5 oz-in.) max.
Shaft Material ...................................................................................................... Stainless steel
Terminals ................................................................. Brass / 100 % matte tin over Ni Strike (e3)
Bearing ............................................................................................................ Dual ball bearing
Soldering Condition
Manual Soldering ................................................. 96.5Sn/3.0Ag/0.5Cu solid wire or no-clean
rosin cored wire; 370 °C (700 °F) max. for 3 seconds
Wave Soldering .............................................. 96.5Sn/3.0Ag/0.5Cu solder with no-clean flux;
260 °C (500 °F) max. for 5 seconds
Wash Processes ........................................................................................Not recommended
2.03
(.080)
0.51
(.020)
1.55 ± 0.25
(.061 ± .010)
1.02
(.040)
2.80 ± 0.10
(.110 ± .004)
45 ° ± 5 °
Fig.
1
OUTPUT VOLTAGE INCREASES WHEN
SHAFT IS ROTATED IN THIS DIRECTION
(SEE HOW TO ORDER FOR
DIRECTION CODE)
noted.
CCW
CW
5.08
(.200)
3 PLCS.
Rotational Life (Millions of Cycles)
Rotational Life vs. Side Load
120
+
S1
–
GND
(GROUND)
V+ SUPPLY
(INPUT)
100
5.08
(.200)
80
5.08
(.200)
SIGNAL
(OUTPUT)
60
40
Schematic
20
+
0
0
50
100
150
200
250
300
350
400
450
500
MM
(INCHES)
VDD (5 V)
S1
VOUT
–
GND
Shaft Side Load (grams)
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
AMS22U Non-Contacting Analog Rotary Position Sensor
How To Order
A M S 2 2 U 5 A 1 B L A R L
3
EFFECTIVE
ELECTRICAL ANGLE
10 ° Increments
MODEL DESIGNATOR
Code Description
AM Analog Magnetic
Code
01
02
03
34
35
36
CONFIGURATION
Code Description
S
Single-turn
Description
10 °
20 °
30 °
340 °
350 °
360 °
Note: Effective Electrical Angle
available in 10 ° increments from
a minimum of 10 ° to 360 ° maximum.
SIZE
Code Description
22
22 mm
DIRECTION*
Code Description
1
CCW (Increasing Voltage)
3
CW (Increasing Voltage)
MOUNTING CONFIGURATION
Servo Mount Options
Code Description
Dual Ball Bearing
U
1/2 ” Shaft FMS,
1/8 ” Shaft Dia.
* See Figure 1 for clarification.
TERMINAL CONFIGURATION
Code Description
L
Axial
SUPPLY VOLTAGE, VCC
Code Description
5
5 VDC
Code
A1
3 4
OUTPUT TYPE
Type
Signal
Analog Single
SHAFT STYLE
Code Description
F
Flatted
R
Round
Resolution
12 Bit
INDEPENDENT LINEARITY
Code Description
B
0.5 %
C
0.3 %
VOLTAGE RATIO ±1 %
Code Description
A
1-99 % of VCC
B
5-95 % of VCC
C
10-90 % of VCC
PROCESSING SPEED
Code Output Refresh Rate
H
High (200 µs Typ.)
L
Low (600 µs Typ.)
Shaded areas represent most common features.
Vout (%)
Standard Output: 1-Turn CW Increasing (Code 334 Shown)
100
90
80
70
60
50
40
30
20
10
0
VOLTAGE RATIO “A”
VOLTAGE RATIO “C”
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 320 340 360
Mechanical Angle (°)
CW DIRECTION
Asia-Pacific:
Tel: +886-2 2562-4117
Fax: +886-2 2562-4116
EMEA:
Tel: +36 88 520 390
Fax: +36 88 520 211
The Americas:
Tel: +1-951 781-5500
Fax: +1-951 781-5700
www.bourns.com
REV. 01/14
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
Similar pages