AS098Q300W TECHNICAL DATA High Power Stacked Infrared Laser Diode Array Features Applications • • • • • • • • Output Power: 300 W qCW 920-980 nm Emission Wavelength Spectral Width: ≤4 nm High Reliability, High Efficiency QCW stack can be designed according to the customer of non-standard products heat sink package Laser Pumping Medical Usage High power laser diode applications Specifications (25°C) Item Optical Specifications qCW Output Power qCW Output Power / Bar Array Length Center Wavelength Wavelength Tolerance Spectral Width Package Style Bar Length Number of Bars Wavelength Temperature Coefficient Beam Divergence Electrical Specifications Slope Efficiency Conversion Efficiency Threshold Current Operating Current Operating Voltage Absolute Maximum Ratings Reverse Voltage Operating Temperature Storage Temperature 20.09.2010 Symbol Value Unit PO PS L λC W W mm nm nm nm θ┴×θ║ 300 60 10 920-980 ±5 ≤4 Micro Channel 0.4 5 0.3 40x8 ES NS ITH IF UF ≥ 0.8 ≥ 30% ≤ 15 ≤ 75 ≤ 10 W/A UR TOP TSTG 2.5 +10 … +40 -40 ... +85 V °C °C Δλ AS098Q300W mm nm/°C deg A A V 1 of 2 Package Dimensons Micro Channel (Unit:mm) Notes 1. Caution! Don't look at the laser beam directly, because it's harmful to eyes. 2. The storage temperature is between -40 and 85 °C. 3. Under normal circumstances, the higher the temperature is, the shorter the life of semiconductor laser will be. It is recommended to use lasers under TEC cooling or in airconditioned room. 4. To use a laser diode in following sequences: Turn on the power supply; connect to the laser diode; and then increase the current gradually to the specified operating value. To shut down the laser diode, please decrease the current to zero gradually, and then turn off the power. Please make sure that the power supply has no current overshoot at any time. The current overshoot can damage the laser diodes permanently. 5. The high power laser diode arrays are very sensitive to electrostatic. Please wear antistatic bracelet during operating with the laser diodes (arrays). 6. Be sure that the operating current does not exceed the specified operating current. Otherwise, it will accelerate laser aging, shorten lifetime or even damage devices permanently. 7. A clean, dry and ventilated environment should be available when storing and operating laser diodes (arrays). Dust may degrade the laser diodes (arrays). 8. Constant-current power supply with voltage regulator should be used to avoid surge. 20.09.2010 AS098Q300W 2 of 2