Willow DP6-1P Industrial relay Datasheet

DP6-1P
industrial relays
• Relays DP6-1P - with changeover relay, rated load 6 A / 250 V (AC1)
• 35 mm DIN rail mount, EN 50022,
wires connection with screw terminals - 0.2...4 mm2
• Adapted for the co-operation with interconnection strip type DG20
• Equipped in LED green
• Recognitions, certificates, directives:
R
VDE
Contacts
Contact number & arrangement
Contact material
Max. switching voltage
Min. switching voltage
Rated load
AC/DC
AC/DC
AC1
DC1
Min. switching current
Max. inrush current
Rated current
Max. breaking capacity
Resistance - initially
Max. operating frequency
• at rated load
• no load
Input control ci rcuit
Rated voltage
AC1
1C/O
AgSnO2, AgSnO2/Au 3 um
250 V / 220 V
AgSnO2: 12 V
AgSnO2/Au 3 um: 100 mV
AgSnO2: 6 A / 250 V AC
AgSnO2/Au 3 um: 50 mA / 30 V AC
AgSnO2: 6 A / 24 V DC
AgSnO2/Au 3 um: 50 mA / 36 V DC
AgSnO2: 8 mA / 24 V
AgSnO2/Au 3 um: 2 mA / 24 V
AgSnO2: 15 A
AgSnO2/Au 3 um: 100 mA ❶
6A
AgSnO2: 1 500 VA
AgSnO2/Au 3 um: 1.5 VA
AgSnO2: ≤ 50 mΩ 100 mA, 24 V AgSnO2/Au 3 um: ≤ 25 mΩ 100 mA, 5 V
AC1
50/60 Hz AC
DC
AC/DC
Must release voltage
Operating range of supply voltage
Must operate voltage
Input polarization current
Rated power consumption
Insulation
Insulation category
Insulation rated voltage
Rated surge voltage
Overvoltage category
Insulation pollution degree
Dielectric strength
• coil - contact
• contact - contact
General data
Operating time (typical value)
Release time (typical value)
Electrical life
• resistive AC1
• cos φ = 0,4
• resistive DC1
Rated torque for screw terminals
Mechanical life (cycles)
Dimensions (L x W x H)
Weight
Ambient temperature
• storage
• operating
Protection category
Environmental protection
AC
DC
360 cycles/hour
72 000 cycles/hour
95...230 V
12-24-36 V
24-42-115-230 V AC: 50/60 Hz
AC: ≥ 0.2 Un
AC: ≥ 0.5 Un ❷
DC: ≥ 0.1 Un
see Table 1
AC and DC: ≤ 0.7 Un
AC: 0.6...0.85 Un ❷
DC: ≤ 0.8 Un ❷
AC: 8 mA < Ip < 10 mA 230 V AC ❷
0.35...2.2 VA
0.3...1.6 W
C250
400 V AC
4 000 V AC
III
IEC 61810-5 (PN-IEC 664-1)
3
4 000 V AC
1 000 V AC
AC: 7 ms
AC: 15 ms
DC: 6 ms
DC: 10 ms
> 0.6 x 105
6 A, 250 V AC
> 2 x 105
2 A, 250 V AC
105
6 A, 30 V DC
≤ 0.3 Nm
> 2 x 107
80 x 6.2 x 93.8 mm
40 g
-40...+70 oC
-40...+55 oC
-40...+60 oC 12, 24 V DC
o
-40...+40 C 230 V AC ❷ -40...+50 oC 230 V DC ❷
IP 20
RTI IEC 61810-7
Standard contact materials and coil rated voltages are marked with bold type.
❶ Max. inrush current 50 mA at voltage 30 V AC or 36 V DC
❷ Refer version PI6-1P-230VAC/DC-10 - relay with anti-disturbance circuit
Page 1 of 2
www.aecsensors.com
Sales Department Tel: (888) 847-6552
DP6-1P
industrial relays
Input data
Table 1
Input - voltage range
V
Input power
- control circuit (Un)
Relay code
Nominal input
voltage Un
min.
max.
DP6-1P-230VAC
95...230 V AC
0.4...1.8 VA
95.0
253.0
DP6-1P-230VAC-01 *
95...230 V AC
0.4...1.8 VA
95.0
253.0
DP6-1P-12VDC
DP6-1P-12VDC-01 *
12 V DC
12 V DC
0.3 W
0.3 W
8.5
8.5
14.4
14.4
DP6-1P-24VDC
24 V DC
0.45 W
16.8
28.0
DP6-1P-24VDC-01 *
DP6-1P-36VDC
DP6-1P-36VDC-01 *
24 V DC
36 V DC
36 V DC
0.45 W
0.7 W
0.7 W
16.8
25.2
25.2
28.0
40.0
40.0
DP6-1P-24VAC/DC
24 V AC/DC
0.48 VA / 0.48 W
16.8
26.4
DP6-1P-24VAC/DC-01 *
DP6-1P-42VAC/DC
24 V AC/DC
42 V AC/DC
0.48 VA / 0.48 W
0.35 VA / 0.35 W
16.8
29.4
26.4
50.0
DP6-1P-115VAC/DC
115 V AC/DC
1,0 VA / 1.0 W
80.0
130.0
DP6-1P-230VAC/DC
DP6-1P-230VAC/DC-01 *
DP6-1P-230VAC/DC-10 **
230 V AC/DC
230 V AC/DC
230 V AC/DC
1.0 VA / 1.0 W
1.0 VA / 1.0 W
2.2 VA / 1.6 W
161.0
161.0
196.0
253.0
253.0
253.0
Standard versions of relays are marked with bold type.
* - relay with gold plated contacts ** - relay with anti-disturbance circuit
Dimensions
DP6-1P-230VAC, DP6-1P-230VAC-01
+A1
12
14
80
-A2
DP6-1P-12VDC, DP6-1P-12VDC-01
DP6-1P-24VDC, DP6-1P-24VDC-01
DP6-1P-36VDC, DP6-1P-36VDC-01
+A1
12
93.8
14
6.2
-A2
DP6-1P-24VAC/DC, DP6-1P-24VAC/DC-01
DP6-1P-42VAC/DC
+A1
12
14
Mounting
Relays DP6-1P are designed for 35 mm DIN rail mount, EN 50022.
DP6-1P are adapted for the co-operation with interconnection
-A2
strip type DG20. Interconnection strip DG20 allows to common
DP6-1P-115VAC/DC
DP6-1P-230VAC/DC, DP6-1P-230VAC/DC-01
bridging outputs or inputs. Colours of strips: DG20-1 red, DG202 black, DG20-3 blue.
+A1
12
123.7
21
12
14
2.8
-A2
2.8
0.8
2.8
12
14
F ILT E R
DP6-1P-230VAC/DC-10
+A1
Ordering codes
-A2
Ordering codes DP6-1P are specified in Table 1,
"Relay code" column.
American Electronic Components, Inc. 1101 Lafayette Street, Elkhart, IN 46516
Page 2 of 2
www.aecsensors.com
Sales Department Tel: (888) 847-6552
Similar pages