Choke Coils Power Choke Coil for Automotive application Series: PCC-M0754M (MC) PCC-M0854M (MC) PCC-M0850M (MC) PCC-M1054M (MC) PCC-M1050M (MC) PCC-M1050ML (MC) PCC-M1060ML (MC) M0754M M0854M M0850M M1054M M1050M M1050ML M1060ML Realize high heat resistance and high reliability with metal composite core(MC) Industrial Property : patents 21 (Registered 2/Pending 19) ● High heat resistance : Operation up to 150 °C : High vibration resistance due to newly developed integral ● High-reliability construction and severe reliability condition of automotive application is covered : Excellent inductance stability by using ferrous alloy magnetic ● High bias current material(Fig.1) : Excellent inductance stability in wide temp. range (Fig.1) ● Temp. stability : New metal composite core technology ● Low buzz noise : Low RDC of winding and low eddy-current loss of the core ● High efficiency ● RoHS compliant ● Fig.1 Inductance v.s. DC current, Temp. ETQP5M470YFM(reference) 60.0 50.0 Inductance (µH) ■ Features 40.0 30.0 25 °C 100 °C 125 °C 150 °C 20.0 10.0 0.0 0.0 0.5 1.0 1.5 2.0 IDC (A) 2.5 3.0 ■ Recommended Applications ● Noise filter for various drive circuitry requiring high temp. operation and peak current handling capability ● DC-DC converters ■ Standard Packing Quantity ● 500 pcs./Reel ■ Explanation of Part Numbers 1 2 3 4 E T Q P Product Code 5 Classification Height 6 7 8 M Winding Inductance 4R7 4.7 µH 220 22 µH 101 100 µH 9 10 11 Y F Core Suffix M K C 12 Size 7 mm size 8 mm size 10 mm size ■ Temperature rating Operating temperature range Storage condition After PWB mounting Before PWB mounting Tc : -40 °C to +150 °C(Including self-temperature rise) Ta : -5 °C to +35 °C 85%RH max. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – 171 – 02 Mar. 2012 Choke Coils 1. Series PCC-M0754M (ETQP5MYFM) ■ Standard Parts Series Part No. Inductance ✽1 L0 Tolerance (µH) (%) 4.7 22 ±20 34 48 DCR (at 20 °C) (m액) Typ. Tolerance (%) (max.) 20(23) 92(102) ±10 120(132) 156(172) Rated Current (Typ. : A) T=40K L=–30% (✽2) (✽3) (✽4) 6.3 8.0 13.1 3.0 3.7 5.8 2.6 3.3 4.8 2.3 2.9 4.1 ETQP5M4R7YFM ETQP5M220YFM ETQP5M330YFM ETQP5M470YFM (✽1) Measured at 100 kHz. (✽2) DC current which causes temperature rise of 40 K. Parts are soldered by reflow on four-layer PWB (1.6 mm FR4) and measured at room temperature. See also (✽ 5) (✽ 3) DC current which causes temperature rise of 40 K. Parts are soldered by reflow on multilayer PWB with high heat dissipation performance. Note: Heat radiation constant is approx. 31 K/W measured on 7.5҂7.0҂5.4 mm case size. See also (✽ 5) (✽ 4) Suturation rated current : DC current which causes L(0) drop –30 %. (✽ 5) Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +150 °C should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area. PCC-M0754M [7.5҂7.0҂5.4(mm)] ■ Performance Characteristics (Reference) ● Inductance vs DC Current ETQP5M4R7YFM 4.0 3.0 2.0 1.0 0 10 IDC (A) 15 20 15 10 5 0 20 10 0 0 2 4 6 IDC (A) 8 10 0 2 4 IDC (A) 6 8 40 30 20 10 0 1 2 3 4 IDC (A) 5 6 ● Case Temperature vs DC Current ✽ PWB condition A : Four-layer PWB (1.6 mm FR4), See also ( 2) ✽ PWB condition B : Multilayer PWB with high heat dissipation performance. See also ( 3) ETQP5M220YFM ETQP5M4R7YFM 80 70 60 50 40 30 20 10 0 PWB condition A PWB condition B 0 2 4 6 IDC (A) 8 10 80 70 60 50 40 30 20 10 0 ETQP5M330YFM PWB condition A PWB condition B 욼T(K) 80 70 60 50 40 30 20 10 0 욼T(K) 욼T(K) 20 50 0 욼T(K) 30 ETQP5M470YFM 60 Inductance (µH) 5 ETQP5M330YFM 40 Inductance (µH) 5.0 0.0 ETQP5M220YFM 25 Inductance (µH) Inductance (µH) 6.0 0 1 2 3 IDC (A) 4 5 80 70 60 50 40 30 20 10 0 PWB condition A PWB condition B 0 1 2 3 IDC (A) 4 5 ETQP5M470YFM PWB condition A PWB condition B 0 1 2 IDC (A) 3 4 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – 172 – 01 Oct. 2011 Choke Coils 2. Series PCC-M0854M/PCC-M0850M (ETQP5MYFK/ETQP5MYGK) ■ Standard Parts Series Part No. PCC-M0854M [8.5҂8.0҂5.4(mm)] ETQP5M2R5YFK ETQP5M100YFK ETQP5M220YFK ETQP5M470YFK Inductance ✽1 DCR (at 20 °C) (m액) L0 Tolerance Typ. Tolerance (µH) (%) (%) (max.) 2.5 7.6(8.4) 10 33(37) ±20 ±10 22 63(70) 48 125(138) PCC-M0850M [8.5҂8.0҂5.0(mm)] ETQP5M101YGK 100 ±20 302(333) Rated Current (Typ. : A) T=40K L=–30% (✽3) (✽4) (✽2) 11.9 14.0 20.1 5.7 6.7 13.0 4.1 4.8 6.9 2.9 3.4 5.4 ±10 1.7 2.1 3.0 (✽1) Measured at 100 kHz. (✽2) DC current which causes temperature rise of 40 K. Parts are soldered by reflow on four-layer PWB (1.6 mm FR4) and measured at room temperature. See also (✽ 5) (✽ 3) DC current which causes temperature rise of 40 K. Parts are soldered by reflow on multilayer PWB with high heat dissipation performance. Note: Heat radiation constant are approx. 27 K/W measured on 8.5҂8.0҂5.4 mm case size and approx. 29 K/W measured on 8.5҂8.0҂5.0 mm case size. See also (✽ 5) (✽ 4) Suturation rated current : DC current which causes L(0) drop –30 %. (✽ 5) Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of + 150 °C should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area. ■ Performance Characteristics (Reference) ● Inductance vs DC Current ETQP5M2R5YFK 2.0 1.5 1.0 0.5 10 15 20 IDC (A) 25 40 30 20 10 2 4 IDC (A) 6 2 0 16 20 ETQP5M470YFK PWB condition A PWB condition B 0 1 2 3 IDC (A) 4 5 5 0 6 8 10 12 14 16 IDC (A) 0 2 4 6 IDC (A) 8 10 ETQP5M101YGK 60 40 20 0 1 2 3 IDC (A) 4 5 ✽ 욼T(K) 8 12 IDC (A) 10 PWB condition A : Four-layer PWB (1.6 mm FR4), See also ( 2) ✽ PWB condition B : Multilayer PWB with high heat dissipation performance. See also ( 3) PWB condition A PWB condition B 4 4 15 80 0 ETQP5M2R5YFK 0 0 2 20 100 욼T(K) 욼T(K) 욼T(K) 80 70 60 50 40 30 20 10 0 4 8 ● Case Temperature vs DC Current 80 70 60 50 40 30 20 10 0 6 120 50 0 8 30 Inductance (µH) Inductance (µH) 5 ETQP5M470YFK 60 0 10 80 70 60 50 40 30 20 10 0 ETQP5M100YFK PWB condition A PWB condition B 욼T(K) 0 ETQP5M220YFK 25 Inductance (µH) 2.5 0.0 ETQP5M100YFK 12 Inductance (µH) Inductance (µH) 3.0 0 80 70 60 50 40 30 20 10 0 2 4 6 IDC (A) 8 10 80 70 60 50 40 30 20 10 0 ETQP5M220YFK PWB condition A PWB condition B 0 1 2 3 4 IDC (A) 5 6 7 ETQP5M101YGK PWB condition A PWB condition B 0 0.5 1.0 1.5 2.0 2.5 3.0 IDC (A) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – 173 – 01 Oct. 2011 Choke Coils 3. Series PCC-M1054M/PCC-M1050M (ETQP5MYFC/ETQP5MYGC) ■ Standard Parts Inductance ✽1 Series Part No. ETQP5M2R5YFC ETQP5M3R3YFC PCC-M1054M ETQP5M4R7YFC [10.7҂10.0҂5.4(mm)] ETQP5M100YFC ETQP5M220YFC PCC-M1050M ETQP5M101YGC [10.7҂10.0҂5.0(mm)] L0 (µH) 2.5 3.3 4.7 10 22 DCR (at 20 °C) (m액) Rated Current (Typ. : A) T=40K L=–30% (✽2) (✽3) (✽4) 15.1 18.1 27.2 13.1 15.7 22.7 10.9 13.1 20.0 7.1 8.5 10.7 5.2 6.2 6.7 Typ. Tolerance Tolerance (%) (%) (max.) 5.3(5.9) 7.1(7.9) ±20 10.2(11.3) ±10 23.8(26.2) 45(50) 97 ±20 208(229) ±10 2.2 2.7 3.0 (✽1) Measured at 100 kHz. (✽2) DC current which causes temperature rise of 40 K. Parts are soldered by reflow on four-layer PWB (1.6 mm FR4) and measured at room temperature. See also (✽ 5) (✽ 3) DC current which causes temperature rise of 40 K. Parts are soldered by reflow on multilayer PWB with high heat dissipation performance. Note: Heat radiation constant are approx. 23 K/W measured on 10.7҂10.0҂5.4 mm case size and approx. 26 K/W measured on 10.7҂10.0҂5.0 mm case size. See also (✽ 5) (✽ 4) Suturation rated current : Dc current which causes L(0) drop –30 %. (✽ 5) Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +150 °C should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area. ■ Performance Characteristics (Reference) ● Inductance vs DC Current ETQP5M2R5YFC ETQP5M3R3YFC 2.0 1.5 1.0 0.5 0.0 0 10 20 IDC (A) 30 3 2 1 0 40 Inductance (µH) Inductance (µH) Inductance (µH) 2.5 ETQP5M100YFC 15 20 IDC (A) 25 8 6 4 2 0 2 4 6 8 10 12 14 16 IDC (A) 3 2 1 15 10 5 2 4 6 IDC (A) 8 5 10 10 IDC (A) 20 ETQP5M101YGC 80 60 40 20 0 1 2 3 4 IDC (A) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – 174 – 15 100 0 0 0 120 20 0 4 30 Inductance (µH) Inductance (µH) Inductance (µH) 10 25 10 0 5 ETQP5M220YFC 12 5 0 0 ETQP5M4R7YFC 6 4 3.0 5 6 7 02 Mar. 2012 Choke Coils ● Case Temperature vs DC Current ✽ PWB condition A : Four-layer PWB (1.6 mm FR4), See also ( 2) ✽ PWB condition B : Multilayer PWB with high heat dissipation performance. See also ( 3) ETQP5M3R3YFC 0 5 10 15 IDC (A) 20 25 80 70 60 50 40 30 20 10 0 PWB condition A PWB condition B 0 2 4 6 8 IDC (A) 10 12 8 12 16 IDC (A) 20 24 80 70 60 50 40 30 20 10 0 PWB condition A PWB condition B 0 2 4 6 IDC (A) 8 PWB condition A PWB condition B 0 4 8 12 IDC (A) 10 80 70 60 50 40 30 20 10 0 20 PWB condition A PWB condition B 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 IDC (A) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – 175 – 16 ETQP5M101YGC 욼T(K) PWB condition A PWB condition B 0 4 80 70 60 50 40 30 20 10 0 ETQP5M220YFC 욼T(K) 욼T(K) ETQP5M100YFC 80 70 60 50 40 30 20 10 0 ETQP5M4R7YFC 욼T(K) PWB condition A PWB condition B 욼T(K) 욼T(K) ETQP5M2R5YFC 80 70 60 50 40 30 20 10 0 01 Oct. 2011 Choke Coils 4. Series PCC-M1050ML/PCC-M1060ML (ETQP5MYLC/ETQP6MYLC) ■ Standard Parts Inductance ✽1 Series Part No. DCR (at 20 °C) (m액) Rated Current (Typ. : A) T=40K L=–30% (✽2) (✽3) (✽4) L0 (µH) Tolerance (%) Typ. (max.) PCC-M1050ML ETQP5MR68YGC [10.9҂10.0҂5.0(mm)] 0.68 ±20 1.75 (1.93) ±10 26.3 31.5 42.0 PCC-M1060ML ETQP6M2R5YLC [10.9҂10.0҂6.0(mm)] 2.5 ±20 4.5 (5.0) ±10 16.3 19.6 27.0 Tolerance (%) (✽1) Measured at 100 kHz. (✽2) DC current which causes temperature rise of 40 K. Parts are soldered by reflow on four-layer PWB (1.6 mm FR4) and measured at room temperature. See also (✽ 5) (✽ 3) DC current which causes temperature rise of 40 K. Parts are soldered by reflow on multilayer PWB with high heat dissipation performance. Note: Heat radiation constant are approx. 23 K/W measured on 10.9҂10.0҂5.0 mm case size and approx. 23 K/W measured on 10.9҂10.0҂6.0 mm case size. See also (✽ 5) (✽ 4) Suturation rated current : Dc current which causes L(0) drop –30 %. (✽ 5) Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +150 °C should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area. ■ Performance Characteristics (Reference) ● Inductance vs DC Current ETQP6M2R5YLC 3.0 0.7 0.6 Inductance (µH) Inductance (µH) ETQP5MR68YLC 0.5 0.4 0.3 0.2 0.1 0.0 0 10 20 30 IDC (A) 40 50 2.5 2.0 1.5 1.0 0.5 0.0 60 0 10 욼T(K) 욼T(K) ETQP6M2R5YLC PWB condition A PWB condition B 5 10 15 20 25 IDC (A) 30 40 PWB condition A : Four-layer PWB (1.6 mm FR4), See also ( 2) ✽ PWB condition B : Multilayer PWB with high heat dissipation performance. See also ( 3) ETQP5MR68YLC 0 30 ✽ ● Case Temperature vs DC Current 80 70 60 50 40 30 20 10 0 20 IDC (A) 35 40 45 80 70 60 50 40 30 20 10 0 PWB condition A PWB condition B 0 4 8 12 16 IDC (A) 20 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – 176 – 24 28 00 Mar. 2012 Choke Coils ■ Dimensions in mm (not to scale) Dimensional tolerance unless noted : ±0.5 Series PCC-M0754M Series PCC-M0854M Series PCC-M0850M (ETQP5MYFM) (ETQP5MYFK/YGK) Inductance 7.5±0.4 Inductance Suffix 2.0 Polarity 2.0 0.1 min. H Series M0854M M0850M 2.0 H 5.4 max. 5.0 max. Series PCC-M1054M Series PCC-M1050M Series PCC-M1050ML Series PCC-M1060ML (ETQP5MYFC/YGC) (ETQP5MYLC/ETQP6MYLC) Inductance 10.9±0.6 H 5.4 max. 5.0 max. 7.3±0.3 1.8 1.8 Polarity 0.5 min. H Series M1054M M1050M Date Code H 2.0 2.0 Polarity Suffix 10.0±0.4 4.2±0.3 10.0±0.4 Suffix 0.1 min. Date Code 2.0 Polarity 0.1 min. 5.4 max. Date Code Inductance 10.7±0.5 3.0±0.3 8.0±0.4 3.0±0.3 7.0±0.4 Date Code Suffix 8.5±0.4 Series H M1050ML 5.0 max. M1060ML 6.0 max. ■ Recommended Land Pattern in mm (not to scale) Dimensional tolerance unless noted : ±0.5 (ETQP5MYFM) Series PCC-M0854M Series PCC-M0850M (ETQP5MYFK/YGK) Series PCC-M1054M Series PCC-M1050M Series PCC-M1050ML Series PCC-M1060ML (ETQP5MYFC/YGC) (ETQP5MYLC/ETQP5MYLC) 3.6 8.0 11.9 4.8 11 11.7 4.0 9.0 9.4 8.4 7.9 11 Series PCC-M0754M 2.8 3.8 6.1 6.5 10.0 12.4 13.7 13.9 The same as the left. The same as the left. The same as the left. Don't wire on the pattern on shaded portion the PWB. ■Packaging Methods Please see Pages 202 to 203 ■Soldering Conditions Please see Page 204 ■ Please see Pages 177 to 178 Safety Precautions Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – 177 – 01 Mar. 2012