OBSOLETE LM108AJAN www.ti.com SNOSAJ6C – FEBRUARY 2005 – REVISED APRIL 2013 LM108AJAN Operational Amplifiers Check for Samples: LM108AJAN FEATURES DESCRIPTION • The LM108 is a precision operational amplifier having specifications a factor of ten better than FET amplifiers over a −55°C to +125°C temperature range. 1 2 • • • Maximum Input Bias Current of 3.0 nA over Temperature Offset Current less than 400 pA over Temperature Supply Current of only 300 μA, even in Saturation Ensured Drift Characteristics The devices operate with supply voltages from ±2V to ±20V and have sufficient supply rejection to use unregulated supplies. Although the circuit is interchangeable with, and uses the same compensation as the LM101A, an alternate compensation scheme can be used to make it particularly insensitive to power supply noise and to make supply bypass capacitors unnecessary. The low current error of the LM108 makes possible many designs that are not practical with conventional amplifiers. In fact, it operates from 10 MΩ source resistances, introducing less error than devices such as the 709 with 10 kΩ sources. Integrators with drifts less than 500 μV/sec and analog time delays in excess of one hour can be made using capacitors no larger than 1 μF. Connection Diagrams *Package is connected to Pin 4 (V−) **Unused pin (no internal connection) to allow for input anti-leakage guard ring on printed circuit board layout. Figure 1. Metal Can Package - TO-99 Package Number LMC Figure 2. Dual-In-Line Package (Top View) CDIP - Package Number NAB 1 2 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. All trademarks are the property of their respective owners. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2005–2013, Texas Instruments Incorporated OBSOLETE LM108AJAN SNOSAJ6C – FEBRUARY 2005 – REVISED APRIL 2013 Figure 3. CDIP - Top View Package Number J www.ti.com Figure 4. CLGA Top View Package Number NAC, NAD Schematic Diagram 2 Submit Documentation Feedback Copyright © 2005–2013, Texas Instruments Incorporated Product Folder Links: LM108AJAN OBSOLETE LM108AJAN www.ti.com SNOSAJ6C – FEBRUARY 2005 – REVISED APRIL 2013 Compensation Circuits Standard Compensation Circuit Alternate Frequency Compensation **Bandwidth and slew rate are proportional to 1/CS Improves rejection of power supply noise by a factor of ten. CO = 30 pF **Bandwidth and slew rate are proportional to 1/Cf Feedforward Compensation These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. Submit Documentation Feedback Copyright © 2005–2013, Texas Instruments Incorporated Product Folder Links: LM108AJAN 3 OBSOLETE LM108AJAN SNOSAJ6C – FEBRUARY 2005 – REVISED APRIL 2013 www.ti.com Absolute Maximum Ratings (1) Supply Voltage ±22V Power Dissipation (2) TO-99 Metal Can 8LD 330mW @ +125°C CDIP 14LD 400mW @ +125°C CDIP 8LD 400mW @ +125°C CLGA 10LD 330mW @ +125°C Ceramic SOIC 10LD 330mW @ +125°C Differential Input Current (3) ±10 mA (4) ±30V Differential Input Voltage Input Voltage (5) ±20V Output Short-Circuit Duration Continuous −55°C ≤TA≤ +125°C Operating Temperature Range −65°C ≤TA≤ +150°C Storage Temperature Range TO-99 Metal Can 8LD Still Air 500LF / Min Air Flow θJA Thermal Resistance θJC CDIP 14LD Still Air 500LF / Min Air Flow 94°C/W 55°C/W CDIP 8LD Still Air 500LF / Min Air Flow 120°C/W 68°C/W CPACK 10LD Still Air 500LF / Min Air Flow 225°C/W 142°C/W Ceramic SOIC 10LD Still Air 500LF / Min Air Flow 225°C/W 142°C/W TO-99 Metal Can 8LD 38°C/W CDIP 14LD 13°C/W CDIP 8LD 17°C/W CLGA 10LD 21°C/W Ceramic SOIC 10LD 21°C/W TO-99 Metal Can 8LD Package Weight (typical) 150°C/W 86°C/W 990mg CDIP 14LD 2,180mg CDIP 8LD 1,090mg CLGA 10LD 225mg Ceramic SOIC 10LD 210mg Maximum Junction Teperature 175°C Lead Temperature (Soldering, 10 sec) 300°C ESD Tolerance (1) (2) (3) (4) (5) (6) 4 (6) 2000V Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is functional, but do not ensure specific performance limits. For ensured specifications and test conditions, see the Electrical Characteristics. The specified specifications apply only for the test conditions listed. Some performance characteristics may degrade when the device is not operated under the listed test conditions. The maximum power dissipation must be derated at elevated temperatures and is dictated by TJmax (maximum junction temperature), θJA (package junction to ambient thermal resistance), and TA (ambient temperature). The maximum allowable power dissipation at any temperature is PDmax = (TJmax - TA) /θJA or the number given in the Absolute Maximum Ratings, whichever is lower. The inputs are shunted with back-to-back diodes for over voltage protection. Therefore, excessive current will flow if a differential input voltage in excess of 1V is applied between the inputs unless some limiting resistance is used. This rating is ±1.0V unless resistances of 2KΩ or greater are inserted in series with the inputs to limit current in the input shunt diodes to the maximum allowable value. For supply voltages less than ±20V, the absolute maximum input voltage is equal to the supply voltage. Human body model, 1.5 kΩ in series with 100 pF. Submit Documentation Feedback Copyright © 2005–2013, Texas Instruments Incorporated Product Folder Links: LM108AJAN OBSOLETE LM108AJAN www.ti.com SNOSAJ6C – FEBRUARY 2005 – REVISED APRIL 2013 Table 1. Quality Conformance InspectionMil-Std-883, Method 5005 - Group A Subgroup Description Temp (°C) 1 Static tests at +25°C 2 Static tests at +125°C 3 Static tests at −55°C 4 Dynamic tests at +25°C 5 Dynamic tests at +125°C 6 Dynamic tests at −55°C 7 Functional tests at +25°C 8A Functional tests at +125°C 8B Functional tests at −55°C 9 Switching tests at +25°C 10 Switching tests at +125°C 11 Switching tests at −55°C LM108A Electrical Characteristics DC Parameters The following conditions apply to all the following parameters, unless otherwise specified. DC: +VCC = +20V, −VCC = −20V, VCM = 0V, RS = 50Ω Symbol Parameter VIO Min Max Units Subgroups +VCC = 35V, -VCC = -5V, VCM = -15V -0.5 0.5 mV 1 -1 1 mV 2, 3 +VCC = 5V, -VCC = -35V, VCM = 15V -0.5 0.5 mV 1 -1 1 mV 2, 3 -0.5 0.5 mV 1 -1 1 mV 2, 3 -0.5 0.5 mV 1 Conditions Notes Input Offset Voltage +VCC = +5V, -VCC = -5V Delta VIO / Delta T Temperature Coeffient of Input Offset Voltage IIO -1 1 mV 2, 3 25°C ≤ TA ≤ +125°C See (1) -5 5 µV/°C 2 25°C ≤ TA ≤ -55°C See (1) -5 5 µV/°C 3 +VCC = 35V, -VCC = -5V, VCM = -15V -0.2 0.2 nA 1 -0.4 0.4 nA 2, 3 +VCC = 5V, -VCC = -35V, VCM = 15V -0.2 0.2 nA 1 -0.4 0.4 nA 2, 3 -0.2 0.2 nA 1 -0.4 0.4 nA 2, 3 -0.2 0.2 nA 1 Input Offset Current +VCC = +5V, -VCC = -5V Delta IIO / Delta T (1) Temperature Coeffient of Input Offset Current -0.4 0.4 nA 2, 3 25°C ≤ TA ≤ +125°C See (1) -2.5 2.5 pA/°C 2 25°C ≤ TA ≤ -55°C See (1) -2.5 2.5 pA/°C 3 Calculated parameter Submit Documentation Feedback Copyright © 2005–2013, Texas Instruments Incorporated Product Folder Links: LM108AJAN 5 OBSOLETE LM108AJAN SNOSAJ6C – FEBRUARY 2005 – REVISED APRIL 2013 www.ti.com LM108A Electrical Characteristics DC Parameters (continued) The following conditions apply to all the following parameters, unless otherwise specified. DC: +VCC = +20V, −VCC = −20V, VCM = 0V, RS = 50Ω Symbol Parameter Conditions Notes ±IIB +VCC = 35V, -VCC = -5V, VCM = -15V +VCC = 5V, -VCC = -35V, VCM = 15V Input Bias Current +VCC = +5V, -VCC = -5V Min Max Units Subgroups -0.1 2 nA 1 -1 2 nA 2 -0.1 3 nA 3 -0.1 2 nA 1 -1 2 nA 2 -0.1 3 nA 3 -0.1 2 nA 1 -1 2 nA 2 -0.1 3 nA 3 -0.1 2 nA 1 2 -1 2 nA -0.1 3 nA 3 +PSRR Power Supply Rejection Ratio +VCC = 10V, -VCC = -20V -16 16 µV/V 1, 2, 3 -PSRR Power Supply Rejection Ratio +VCC = 20V, -VCC = -10V -16 16 µV/V 1, 2, 3 CMRR Common Mode Rejection Ratio VCM = ±15V 96 dB 1, 2, 3 +IOS Short Circuit Current +VCC = +15V, -VCC = -15V, t ≤ 25mS -20 mA 1, 2, 3 −IOS Short Circuit Current +VCC = +15V, -VCC = -15V, t ≤ 25mS 20 mA 1, 2, 3 Power Supply Current +VCC = +15V, -VCC = -15V 0.6 mA 1, 2 0.8 mA 3 +VOP Output Voltage Swing RL = 10KΩ V 4, 5, 6 −VOP Output Voltage Swing RL = 10KΩ V 4, 5, 6 ICC +AVS −AVS AVS (2) 6 Open Loop Voltage Gain RL = 10KΩ, VO = +15V Open Loop Voltage Gain RL = 10KΩ, VO = -15V Open Loop Voltage Gain +VCC = ±5V, RL = 10KΩ, VO = ±2V 16 -16 See (2) 80 V/mV 4 (2) 40 V/mV 5, 6 See (2) 80 V/mV 4 See (2) 40 V/mV 5, 6 See (2) 20 V/mV 4, 5, 6 See Datalog reading in K = V/mV Submit Documentation Feedback Copyright © 2005–2013, Texas Instruments Incorporated Product Folder Links: LM108AJAN OBSOLETE LM108AJAN www.ti.com SNOSAJ6C – FEBRUARY 2005 – REVISED APRIL 2013 LM108A Electrical Characteristics AC Parameters The following conditions apply to all the following parameters, unless otherwise specified. AC +VCC = +20V, −VCC = −20V, VCM = 0V, RS = 50Ω Symbol Parameter Conditions Notes Min Max Units Subgroups TRTR Transient Response Rise Time RL = 10KΩ, CL = 100pF, f < 1KHz, VI = +50mV 1000 nS 7, 8A, 8B TROS Transient Response Overshoot RL = 10KΩ, CL = 100pF, f < 1KHz, VI = +50mV 50 % 7, 8A, 8B +SR Slew Rate AV = 1, VI = -5V to +5V 0.05 V/µS 7, 8A, 8B −SR Slew Rate AV = 1, VI = +5V to -5V 0.05 V/µS 7, 8A, 8B NIBB Noise Broadband BW = 10Hz to 5KHz, RS = 0Ω 15 µVrms 7 NIPC Noise Popcorn BW = 10Hz to 5KHz, RS = 100KΩ 40 µVpk 7 Min Max Units Subgroups LM108A Electrical Characteristics DC Parameters Drift Values The following conditions apply to all the following parameters, unless otherwise specified. DC +VCC = +20V, −VCC = −20V, VCM = 0V, RS = 50Ω Delta calculations performed on JAN S devices at group B, Subgroup 5 only. Symbol Parameter Conditions Notes VIO Input Offset Voltage -0.25 0.25 mV 1 ±IIB Input Bias Current -0.5 0.5 nA 1 Submit Documentation Feedback Copyright © 2005–2013, Texas Instruments Incorporated Product Folder Links: LM108AJAN 7 OBSOLETE LM108AJAN SNOSAJ6C – FEBRUARY 2005 – REVISED APRIL 2013 www.ti.com Typical Performance Characteristics 8 Input Currents Offset Error Figure 5. Figure 6. Drift Error Input Noise Voltage Figure 7. Figure 8. Power Supply Rejection Closed Loop Output Impedance Figure 9. Figure 10. Submit Documentation Feedback Copyright © 2005–2013, Texas Instruments Incorporated Product Folder Links: LM108AJAN OBSOLETE LM108AJAN www.ti.com SNOSAJ6C – FEBRUARY 2005 – REVISED APRIL 2013 Typical Performance Characteristics (continued) Voltage Gain Output Swing Figure 11. Figure 12. Supply Current Open Loop Frequency Response Figure 13. Figure 14. Large Signal Frequency Response Voltage Follower Pulse Response Figure 15. Figure 16. Submit Documentation Feedback Copyright © 2005–2013, Texas Instruments Incorporated Product Folder Links: LM108AJAN 9 OBSOLETE LM108AJAN SNOSAJ6C – FEBRUARY 2005 – REVISED APRIL 2013 www.ti.com Typical Applications †Teflon polyethylene or polycarbonate dielectric capacitor Worst case drift less than 2.5 mV/sec Figure 17. Sample and Hold Figure 18. High Speed Amplifier with Low Drift and Low Input Current 10 Submit Documentation Feedback Copyright © 2005–2013, Texas Instruments Incorporated Product Folder Links: LM108AJAN OBSOLETE LM108AJAN www.ti.com SNOSAJ6C – FEBRUARY 2005 – REVISED APRIL 2013 *In addition to increasing speed, the LM101A raises high and low frequency gain, increases output drive capability and eliminates thermal feedback. Power Bandwidth: 250 KHzSmall Signal Bandwidth: 3.5 MHzSlew Rate: 10V/μS Figure 19. Fast Summing Amplifier Submit Documentation Feedback Copyright © 2005–2013, Texas Instruments Incorporated Product Folder Links: LM108AJAN 11 OBSOLETE LM108AJAN SNOSAJ6C – FEBRUARY 2005 – REVISED APRIL 2013 www.ti.com REVISION HISTORY Date Released Revision Section Changes 02/25/05 A New release, corporate format 1 MDS data sheets converted into one Corp. datasheet format. MJLM108A-X Rev 2A0. MDS will be archived. 01/05/06 B DC Electrical's All temps. +Ios from -15 mA Min to -20 mA Min and Ios from +15 mA Max to +20 mA Max 09/24/10 C Obsolete Data Sheet Revision C, End of Life on Product/NSID Dec. 2008/09 Obsolete Data Sheet Changes from Revision B (April 2013) to Revision C • 12 Page Changed layout of National Data Sheet to TI format .......................................................................................................... 11 Submit Documentation Feedback Copyright © 2005–2013, Texas Instruments Incorporated Product Folder Links: LM108AJAN IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of non-designated products, TI will not be responsible for any failure to meet ISO/TS16949. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2013, Texas Instruments Incorporated