Connor-Winfield MSD64A4-125.00M 3.3v surface mount hcmos clock oscillator Datasheet

THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE.
AURORA, IL 60505.
FAX (630) 851-5040.
PHONE (630) 851-4722.
www.conwin.com
PRODUCT
D ATA
SHEET
CRYSTAL CONTROLLED OSCILLATORS
ABSOLUTE MAXIMUM RATINGS
PARAMETER
Storage Temperature
Supply Voltage
CW 0701
MSD64A4
125.00M
3.3V SURFACE MOUNT HCMOS
CLOCK OSCILLATOR
MSD64A4
TABLE 1.0
UNITS
MINIMUM
-55
NOMINAL
-
MAXIMUM
125
UNITS
°C
(Vcc)
-0.5
-
7
Vdc
MINIMUM
1.8
-20
-40
NOMINAL
-
MAXIMUM
156.25
20
85
UNITS
MHz
ppm
°C
OPERATING SPECIFICATIONS
NOTE
DESCRIPTION
TABLE 2.0
PARAMETER
Frequency Range
Total Frequency Tolerance
Operating Temperature Range
(Fo)
1
Supply Voltage
(Vcc)
2.97
3.3
3.63
Vdc
Supply Current
Jitter (BW=10Hz to 20MHz)
Jitter (BW=12kHz to 20MHz)
SSB Phase Noise at 10Hz offset
SSB Phase Noise at 100Hz offset
SSB Phase Noise at 1KHz offset
SSB Phase Noise at 10KHz offset
SSB Phase Noise at 100KHz offset
(Icc)
-
-60
-90
-125
-135
-140
50
5
1
-
mA
ps rms
ps rms
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
MINIMUM
NOMINAL
MAXIMUM
UNITS
NOTE
INPUT CHARACTERISTICS
The Connor-Winfield
MSD64A4 is a hermetically
sealed surface mount 3.3V
Crystal Controlled Oscillator
(XO) HCMOS/TTL Compatible.
The MSD64A4 is designed for
applications requiring low jitter
and tight stability.
NOTE
TABLE 3.0
PARAMETER
Tri-state Enable Voltage
(Vih)
>70%Vcc
-
-
Vdc
2
Tri-state Disable Voltage
(Vil)
-
-
<30%Vcc
Vdc
2
FEATURES
3.3V OPERATION
LOW JITTER <1ps RMS
HCMOS OUTPUT
CHARACTERISTICS
FREQUENCY TOLERANCE: ±20ppm
TABLE 40
PARAMETER
LOAD
Voltage
(High)
(Low)
(Voh)
(Vol)
Current
(High)
(Low)
Duty Cycle at 50% of Vcc
Rise / Fall Time 10% to 90%
(Ioh)
(Ioh)
MINIMUM
> 0.9(Vcc)
-
NOMINAL
-
MAXIMUM
15
<0.1(Vcc)
UNITS
pF
Vdc
Vdc
-2
45
-
50
1.5
2
55
3
mA
mA
%
nS
NOTE
TEMPERATURE RANGE: -40 to 85°C
TRI-STATE ENABLE / DISABLE
FUNCTION
SURFACE MOUNT PACKAGE WITH
ā€œJā€ LEADS
TAPE AND REEL PACKAGING
PACKAGE CHARACTERISTICS
Package
TABLE 50
Hermetically sealed, ceramic package with gold pl ated J leads.
Note:
1) Inclusive of calibration, frequency vs. temperature stability, supply voltage change, load change,
shock and vibration, 15 years aging.
2) Oscillator output is enabled with no connection on pad 1
ORDERING INFORMATION
MSD64A4
HCMOS
CLOCK
SERIES
- 125.00 MHz
CENTER
FREQUENCY
Specifications subject to change without notice.
DATA SHEET #:
Hc202
PAGE 1
OF
2
REV: 00
DATE:
1/29/04
aCopyright 2001 Connor-Winfield all rights reserved.
THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE.
AURORA, IL 60505.
FAX (630) 851-5040.
PHONE (630) 851-4722.
www.conwin.com
PRODUCT
D ATA
SHEET
CRYSTAL CONTROLLED OSCILLATORS
4
3
1
2
4
3
1
2
Pin
1
2
3
4
Connection
Enable / Disable
Ground
Output
Vcc
Dimensional Tolerance:
±.005 (.127mm)
3
2
4
1
Specifications subject to change without notice.
DATA SHEET #:
Hc202
PAGE 2
OF
2
REV: 00
DATE:
1/29/04
aCopyright 2001 Connor-Winfield all rights reserved.
Similar pages