Discontinuation Notice ! 31.12.2012 30.06.2012 AZ957 on tin ue d AZ955 Discontinuation date: Date of last order: Recommended replacement: SUBMINIATURE PC BOARD RELAY FEATURES • • • • • • • Subminiature size for high density packaging DIL pitch terminals Epoxy sealed for automatic wave soldering High sensitivity: 150 mW nominal with 84 mW pickup Meets FCC Part 68.302 1500 V lightning surge Meets FCC Part 68.304 1000 V dielectric UL file E43203; CSA file LR 702514 GENERAL DATA CONTACTS Arrangement Ratings Light Duty Material Resistance COIL SPDT (1 Form C) Bifurcated crossbar contacts Resistive load: Max. switched power: 30 W or 60 VA Max. switched current: 1 A Max. switched voltage: 60 VDC or 125 VAC UL Rating: 1 A at 30 VDC 0.3 A at 60 VDC 0.5 A at 125 VAC Silver nickel, gold clad Operate Time (typical) Standard: 3 ms at nominal coil voltage Sensitive: 5 ms at nominal coil voltage Release Time (typical) 1 ms at nominal coil voltage (with no coil suppression) Capacitance Coil to contact: 3.0 pF Contact to contact: 3.0 pF Bounce (typical) At 10 mA contact current 2 ms at operate 8 ms at release Dielectric Strength 1250 Vrms coil to contact (at sea level for 1 min.) 500 Vrms between open contacts Meets FCC Part 68.302 1500 V lightning surge Meets FCC Part 68.304 1000 V dielectric sc Standard coil:113 mW Sensitive coil: 84 mW Max. Continuous Dissipation .5 W at 20°C (68°F) ambient Temperature Rise Standard: 33°C (59°F) at nominal coil voltage Sensitive: 25°C (45°F) at nominal coil voltage Di Max. 105°C (221°F) NOTES 1. 2. 3. 4. Minimum operations 10 million operations 1 x 105 at 0.5 A 120 VAC Res. < 100 milliohms initially Power At Pickup Voltage (typical) Temperature Life Expectancy Mechanical Electrical All values at 20°C (68°F). Relay may pull in with less than “Must Operate” value. Other coil resistances and sensitivities available upon request. Specifications subject to change without notice. ZETTLER Insulation Resistance 100 megohms min. at 20°C, 500 VDC, 50% RH Dropout Greater than 10% of nominal coil voltage Ambient Temperature Operating At nominal coil voltage Standard: -40°C (-40°F) to 70°C (158°F) Sensitive: -40°C (-40°F) to 80°C (176°F) Both: -25°C (-13°F) to 105°C (221°F) Storage Vibration 0.039" (1.0 mm) DA at 10–55 Hz Shock 10 g Enclosure P.B.T. polyester Terminals Tinned copper alloy Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Max. Immersion Time 30 seconds Weight 1.8 grams electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 [email protected] Discontinuation Notice Discontinuation date: Date of last order: Recommended replacement: on tin ue d ! AZ955 31.12.2012 30.06.2012 AZ957 RELAY ORDERING DATA COIL SPECIFICATIONS: STANDARD COIL Nominal Coil VDC 1.5 Must. Operate VDC 1.1 Max. Continuous VDC 2.4 Coil Resistance ±10% 11.3 45.0 ORDER NUMBER AZ955-1C-1.5DE 3 2.3 4.7 5 3.8 7.9 125 AZ955-1C-5DE AZ955-1C-3DE 6 4.5 9.5 180 AZ955-1C-6DE 9 6.8 14.2 405 AZ955-1C-9DE 12 9.0 19.0 720 AZ955-1C-12DE 24 18.0 37.9 2880 AZ955-1C-24DE COIL SPECIFICATIONS: SENSITIVE COIL Nominal Coil VDC 1.5 Must. Operate VDC 1.1 Max. Continuous VDC 2.7 Coil Resistance ±10% 15.0 60.0 ORDER NUMBER AZ955-1C-1.5DSE 3 2.3 5.5 5 3.8 9.1 167 AZ955-1C-5DSE AZ955-1C-3DSE 6 4.5 11.0 240 AZ955-1C-6DSE 9 6.8 16.4 540 AZ955-1C-9DSE 12 9.0 21.9 960 AZ955-1C-12DSE 24 18.0 43.8 3840 AZ955-1C-24DSE MECHANICAL DATA .472 [12.0] PC BOARD LAYOUT Viewed toward terminals .291 [7.4] .300 [7.6] .100 [2.5] .385 [9.8] .033 [0.84] .045 [1.15] .200 [5.1] sc .020 [0.5] .100 [2.5] .300 [7.6] .138 [3.5] TYP .200 [5.1] 4xø.032 [ø0.8] 2xø.024 [ø0.6] 2xø.016 [ø0.4] Di WIRING DIAGRAM Viewed toward terminals 1 2 5 10 9 6 4x.020 [0.5] 4x.008 [0.2] Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" ZETTLER electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 [email protected]