AZ766 SPST SUBMINIATURE POWER RELAY FEATURES • • • • • • Small footprint Low seated height Low cost Epoxy sealed version available 12 Amp switching UL, CUR file E44211 CONTACTS GENERAL DATA Arrangement SPST (1 Form A) Ratings Resistive load: Max. switched power: 300 W or 2770 VA Max. switched current: 13.5 A Max. switched voltage: 150 VDC* or 400 VAC Life Expectancy Mechanical Electrical Minimum operations 1 x 107 1 x 105 at 12 A 125 VAC Res. Operate Time (typical) 8 ms at nominal coil voltage Release Time (typical) 5 ms at nominal coil voltage (with no coil suppression) * Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Rated Load UL, CUR 13.5 A at 125 VAC 12 A at 125 VAC, general use, 100k cycles 10 A at 277 VAC / 30 VDC, 100k cycles TV–5 1/ HP at 125 VAC / 250 VAC 4 Material Silver tin oxide Resistance < 50 milliohms initially COIL Power Dielectric Strength 2500 Vrms coil to contact (at sea level for 1 min.) 1000 Vrms between open contacts Insulation Resistance 1000 megohms min. at 20°C 500 VDC 50% RH Dropout Greater than 5% of nominal coil voltage Ambient Temperature Operating Storage At nominal coil voltage -40°C (-40°F) to 85°C (188°F) -40°C (-40°F) to 105°C (221°F) Vibration 0.040" (1.0 mm) DA at 10–50 Hz Shock 10 g operating, 100 g damage Enclosure P.B.T. polyester Terminals Tinned copper alloy, P. C. At Pickup Voltage (typical) 253 mW Max. Solder Temp. 270°C (518°F) Max. Continuous Dissipation 1.3 W at 20°C (68°F) ambient Max. Solder Time 5 seconds Temperature Rise 39°C (70°F) at nominal coil voltage Max. Solvent Temp. 80°C (176°F) Max. 130°C (266°F) Max. Immersion Time 30 seconds Weight 6 grams Packing unit in pcs 50 per plastic tube / 1500 per carton box Temperature NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. ZETTLER electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2004-08-22 AZ766 RELAY ORDERING DATA COIL SPECIFICATIONS Nominal Coil VDC 3 ORDER NUMBER Must Operate VDC 2.25 Max. Continuous VDC 5.0 Coil Resistance Ohm ± 10% 20 AZ766–1A–3D AZ766–1A–3DE 5 3.75 8.4 55 AZ766–1A–5D AZ766–1A–5DE 6 4.5 10.2 80 AZ766–1A–6D AZ766–1A–6DE 9 6.75 15.3 180 AZ766–1A–9D AZ766–1A–9DE Unsealed Sealed 12 9.0 20.4 320 AZ766–1A–12D AZ766–1A–12DE 18 13.5 30.6 720 AZ766–1A–18D AZ766–1A–18DE 24 18.0 40.8 1,280 AZ766–1A–24D AZ766–1A–24DE MECHANICAL DATA PC BOARD LAYOUT .724 [18.4] .093 [2.3] .400 [10.2] .598 [15.2] .410 [10.4] .070 [1.8] .465 [11.8] 4 x ø.050 [ø1.3] .140 [3.6] .465 [11.8] .078 [2.0] .539 [13.7] 2 x .039 [1.0] Viewed toward terminals 2 x .016 [0.4] 4 1 WIRING DIAGRAM 3 2 4 3 2 x .019 [0.5] SQ 1 2 Viewed toward terminals Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" ZETTLER electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2004-08-22