MPSH17 Preferred Device CATV Transistor NPN Silicon Features • Pb−Free Package is Available* http://onsemi.com COLLECTOR 3 MAXIMUM RATINGS Rating Symbol Value Unit Collector −Emitter Voltage VCEO 15 Vdc Collector −Base Voltage VCBO 20 Vdc Emitter −Base Voltage VEBO 3.0 Vdc PD 350 2.81 mW mW/°C TJ, Tstg −55 to +150 °C Characteristic Symbol Max Unit Thermal Resistance, Junction to Ambient (Printed Circuit Board Mounting) RqJA 357 °C/W Total Device Dissipation @ TA = 25°C Derate above 25°C Operating and Storage Junction Temperature Range 1 BASE 2 EMITTER MARKING DIAGRAM THERMAL CHARACTERISTICS Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. TO−92 CASE 29−11 STYLE 2 1 2 MPS H17 AYWW G G 3 MPSH17 = Device Code A = Assembly Location Y = Year WW = Work Week G = Pb−Free Package (Note: Microdot may be in either location) ORDERING INFORMATION Device MPSH17 MPSH17G MPSH17RLRA MPSH17RLRAG Package Shipping † TO−92 5,000 Units/Box TO−92 (Pb−Free) 5,000 Units/Box TO−92 2,000/Tape & Reel TO−92 (Pb−Free) 2,000/Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. Preferred devices are recommended choices for future use and best overall value. *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. © Semiconductor Components Industries, LLC, 2006 January, 2006 − Rev. 3 1 Publication Order Number: MPSH17/D MPSH17 ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristic Symbol Min Typ Max Unit Collector −Emitter Breakdown Voltage (IC = 1.0 mAdc, IB = 0) V(BR)CEO 15 − − Vdc Collector −Base Breakdown Voltage (IC = 100 mAdc, IE = 0) V(BR)CBO 20 − − Vdc Emitter −Base Breakdown Voltage (IE = 10 mAdc, IC = 0) V(BR)EBO 3.0 − − Vdc ICBO − − 100 nAdc DC Current Gain (IC = 5.0 mAdc, VCE = 10 Vdc) hFE 25 − 250 − Collector−Emitter Saturation Voltage (IC = 10 mAdc, IB = 1.0 mAdc) VCE(sat) − − 0.5 − fT 800 − − MHz Collector−Base Capacitance (VCB = 10 Vdc, f = 1.0 MHz) Ccb 0.3 − 0.9 pF Small−Signal Current Gain (IC = 5.0 mAdc, VCE = 10 Vdc, f = 1.0 kHz) hfe 30 − − − Noise Figure (IC = 5.0 mAdc, VCC = 12 Vdc, RS = 50 W, f = 200 MHz) NF − − 6.0 dB Gpe − 24 − dB OFF CHARACTERISTICS Collector Cutoff Current (VCB = 15 Vdc, IE = 0) ON CHARACTERISTICS SMALL− SIGNAL CHARACTERISTICS Current −Gain − Bandwidth Product (IC = 5.0 mAdc, VCE = 10 Vdc, f = 100 MHz) FUNCTIONAL TEST Amplifier Power Gain (IC = 5.0 mAdc, VCC = 12 Vdc, RS = 50 W, f = 200 MHz) http://onsemi.com 2 MPSH17 PACKAGE DIMENSIONS TO−92 (TO−226) CASE 29−11 ISSUE AL A NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. B R P L SEATING PLANE DIM A B C D G H J K L N P R V K D X X G J H V C SECTION X−X 1 N INCHES MIN MAX 0.175 0.205 0.170 0.210 0.125 0.165 0.016 0.021 0.045 0.055 0.095 0.105 0.015 0.020 0.500 −−− 0.250 −−− 0.080 0.105 −−− 0.100 0.115 −−− 0.135 −−− MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.407 0.533 1.15 1.39 2.42 2.66 0.39 0.50 12.70 −−− 6.35 −−− 2.04 2.66 −−− 2.54 2.93 −−− 3.43 −−− STYLE 2: PIN 1. BASE 2. EMITTER 3. COLLECTOR N ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: N. American Technical Support: 800−282−9855 Toll Free Literature Distribution Center for ON Semiconductor USA/Canada P.O. Box 61312, Phoenix, Arizona 85082−1312 USA Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada Phone: 81−3−5773−3850 Email: [email protected] http://onsemi.com 3 ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. MPSH17/D