EPCOS B1603 Low-loss filter for digital television Datasheet

SAW Components
Data Sheet B1603
SAW Components
B1603
1220,0 MHz
Low-Loss Filter for Digital Television
Data Sheet
SMD ceramic package QCC8B
Features
■ Low loss RF filter for up down conversion
■ Usable passband 8 MHz
■ No matching network required for operation
at 200 Ω
■ Balanced to balanced operation
■ Ceramic package for Surface Mounted
Technology (SMT)
Terminals
■ Ni, gold-plated
Dimensions in mm, approx. weight 0,07 g
Pin configuration
1
2
5
6
3,7
4,8
Input
Input
Output
Output
To be grounded
Case - ground
Type
Ordering code
B1603
B39122-B1603-Z810
Marking and package
according to
C61157-A7-A46
Packing
according to
F61074-V8167-Z000
Electrostatic Sensitive Device (ESD)
Maximum ratings
Operable temperature range T
Storage temperature range Tstg
DC voltage
Source power
VDC
PS
–40/+85
–40/+85
0
0
˚C
˚C
V
dBm
2
source impedance 200 Ω
Mar 28, 2003
SAW Components
B1603
1220,0 MHz
Low-Loss Filter for Digital Television
Data Sheet
Characteristics
T = -40˚C ... +85˚C
ZS = 200 Ω
ZL = 200 Ω
Operating temperature range:
Terminating source impedance:
Terminating load impedance:
fc
Center frequency
Maximum insertion attenuation
αmax
1216,00 ...1224,00 MHz
Amplitude ripple in passband (p-p)
∆α
1216,00 ...1224,00 MHz
min.
typ.
max.
—
1220,0
—
3,5
—
MHz
4,7
5,8
dB
0,8
1,5
dB
α
Attenuation
50,0
60,0
—
dB
50,0
46,0
60,0
55,0
—
—
dB
dB
MHz
MHz
MHz
MHz
50,0
48,0
50,0
46,0
60,0
58,0
60,0
52,0
—
—
—
—
dB
dB
dB
dB
fC+70,00 ...2000,00 MHz
50,0
55,0
—
dB
—
15
—
ns
500,00 ...fC–91,00 MHz
fC–91,00 ...fC–85,00 MHz
fC–76,00 ...fC–68,00 MHz
fC–88,00
fC–72,00
fC–44,00
fC–36,00
Group delay ripple (p-p)
∆τ
Aperture 500 kHz
1216,00 ...1224,00 MHz
3
Mar 28, 2003
SAW Components
B1603
1220,0 MHz
Low-Loss Filter for Digital Television
Data Sheet
Transfer function
Transfer function (passband)
4
Mar 28, 2003
SAW Components
B1603
1220,0 MHz
Low-Loss Filter for Digital Television
Data Sheet
Transfer function (wideband)
5
Mar 28, 2003
SAW Components
B1603
1220,0 MHz
Low-Loss Filter for Digital Television
Data Sheet
Characteristics
T = 20˚C ... 70˚C
ZS = 200 Ω
ZL = 200 Ω
Operating temperature range:
Terminating source impedance:
Terminating load impedance:
Center frequency
fc
Minimum insertion attenuation
αmin
1210,00 ...1229,00 MHz
typ.
1220,0
max.
—
3,5
4,5
5,8
dB
1,0
3,0
dB
MHz
∆α
Amplitude ripple in passband (p-p)
1210,00 ...1229,00 MHz
—
αrel
Relative attenuation (relative to αmin)
46,0
56,0
—
dB
46,0
42,0
56,0
51,0
—
—
dB
dB
MHz
MHz
MHz
MHz
46,0
44,0
46,0
42,0
56,0
54,0
56,0
48,0
—
—
—
—
dB
dB
dB
dB
fC+70,00 ...2000,00 MHz
46,0
51,0
—
dB
—
40
—
ns
500,00 ...fC–91,00 MHz
fC–91,00 ...fC–85,00 MHz
fC–76,00 ...fC–68,00 MHz
fC–88,00
fC–72,00
fC–44,00
fC–36,00
∆τ
Group delay ripple (p-p)
Aperture 500 kHz
min.
—
1210,00 ...1229,00 MHz
6
Mar 28, 2003
SAW Components
B1603
1220,0 MHz
Low-Loss Filter for Digital Television
Data Sheet
Transfer function
Transfer function (passband)
7
Mar 28, 2003
SAW Components
B1603
1220,0 MHz
Low-Loss Filter for Digital Television
Data Sheet
Published by EPCOS AG
Surface Acoustic Wave Components Division, SAW CE MM PD
P.O. Box 80 17 09, 81617 Munich, GERMANY
 EPCOS AG 2003. Reproduction, publication and dissemination of this data sheet, enclosures
hereto and the information contained therein without EPCOS’ prior express consent is prohibited.
Purchase orders are subject to the General Conditions for the Supply of Products and Services of
the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic
Manufacturers’ Association), unless otherwise agreed.
This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
8
Mar 28, 2003
Similar pages