MW152 Universal 50 Watt Series Medical / Switch Mode Power Supply 3 Year Warranty • 100-240 VAC Universal Input • Desktop Style • Single Output to 50W • Six Models Available; 5V to 24V • Regulated Output with Low Ripple • Impact Resistant Polycarbonate Enclosure • Modified and Custom Designs • No Load Power Consumption < 0.75W • Meets ENERGY STAR Requirements see reverse side for details International Safety Standard Approvals Specifications General Specifications Output Specifications Line and Load Voltage Regulation Excluding cord +/-1% Topology Switching-Fixed Frequency Flyback Ripple 1% Vp-p max. Efficiency Transient Response 0.5ms for 50% Load change Typical 5V and 9V 12V to 24V 70% min. ≥ 84% Hold-up Time Protection Over-current Protection (Hiccup) Short Circuit Protection @120VAC @240VAC 18ms min. 80ms min. Input Specifications Input Voltage Range Storage Temp -30° C to 85° C Approvals and Safety Standards UL60601-1, IEC/EN60601-1 EMC : EN55024 / EN60601-1-2 100-240VAC -10%, +10% 90VAC Input 1.2A max. MTBF 100,000 Calculated Hours Internal Primary Current Fuse, Inrush Limiting Case and Dimension LP6 4.20L x 2.60W x 1.46H (in) 107.0L x 66.0W x 37.0H (mm) Case Material Black 94V0 Polycarbonate Cord and Connectors 6ft. 2 Conductor, 18AWG, AULT#3 Connector. Other connectors are also available. 47-63Hz Protection Environmental Specifications Thermal Performance Operating temperature full load, no derating convectional cooling Non vented case 0° C to 40° C Relative Humidity Non-condensing 5% to 95% Altitude 3,000VAC, 4,250VDC Primary-Secondary Universal input Line Frequency Input Current Dielectric Withstand 0-10,000 feet SL Power Electronics Corp • 6050 King Drive • Ventura CA, 93003 • Phone:805.486.4565 • Fax:805.487.8911 • Email:[email protected] • www.slpower.com MW152 Universal 50 Watt Series Medical / Switch Mode Power Supply For the most current data and application support visit www.slpower.com Output Currents Output Voltage Min Max Ault Part Number Max Watts Ripple Vp-p max. MW152KA05XX* 5V 0.00 A 6.00 A 30.0 W 50 mV MW152KA09XX* 9V 0.00 A 5.00 A 45.0 W 90 mV MW152KA12XX 12 V 0.00 A 4.20 A 50.4 W 120 mV MW152KA15XX 15 V 0.00 A 3.33 A 50.0 W 150 mV MW152KA18XX 18 V 0.00 A 2.80 A 50.4 W 180 mV MW152KA24XX 24 V 0.00 A 2.00 A 48.0 W 240 mV Ault Part Number Key Pin Connections MW152 K A 05 XX Product Family Name Manufacturing Location Design Revision Changes Voltage DC Connector Number Input Configuration IEC320 w/ground C14 (F) IEC320 w/o ground C18 (Q) N. America/ Japan (B) Europe (M) United Kingdom (G) Specify the Input Configuration Code in your order. Australian (E) Shaver C8 (N) Pinout Code Center contact: positive Description Switchcraft 760 plug or equivalent Suggested Mating Switchcraft 712A jack or equivalent Other Connectors are available by special order Energy Star Specifications Power Supplies that are single voltage external AC to DC and AC to AC included with other retail products and single voltage external AC to DC or AC to AC power supplies sold separately; and consumer audio and video equipment, which includes compact audio products, DVD players and recorders as well as television adapters. (Please refer to the reverse side of data sheet for specifications and marking protocol.) Energy-Efficiency Criteria for Active Mode To be eligible for ENERGY STAR qualification, an external power supply must meet or exceed a minimum efficiency for Active Mode, which varies based on the model’s nameplate output power. The table below outlines the equations for determining minimum average efficiency. Nameplate Output Power 0 to ≤ 1 watt > 1 to ≤ 49 watts > 49 watts Minimum Average Efficiency in Active Mode ≥ 0.49 * Pno ≥ [0.09 * Ln (Nameplate Output)] + 0.49 ≥ 0.84 Energy Consumption Criteria for No Load The second half of the ENERGY STAR specification is the No-Load power requirement, which specifies the maximum AC power that may be used by a qualifying external power supply in the No-Load condition. Maximum power consumption levels for No-Load Mode are provided below. Nameplate Output Power 0 to < 10 watts ≥ 10 to ≤ 250 watts Maximum Power in No-Load ≤ 0.5 watts ≤ 0.75 watts *Does not meet Energy Star requirements SL Power Electronics Corp • 6050 King Drive • Ventura CA, 93003 • Phone:805.486.4565 • Fax:805.487.8911 • Email:[email protected] • www.slpower.com Data Sheet © 2006 SL Power Electronics Corp. The information and specifications contained in this data sheet are believed to be correct at time of publication. However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice. Rev.9/22/06