OX260 Series OCXO, Sine wave, HCMOS, 20.4 x 12.7 x 6.5mm (14pin DIL package) ● ● ● ● Stratum 3E Small size through hole package Excellent frequency vs stability Tighter aging options are available Output characteristics Parameter Specification Frequency range 5.0MHz ~ 100.0MHz Operating voltages 3.3V Output waveform Output load Remarks/Test condition Limited frequencies available: 10MHz, 12.8MHz, 13MHz, 15MHz, 16.32MHz, 16.384MHz, 19.2MHz, 19.44MHz, 20MHz, 25.0MHz, 26MHz, 30.72MHz, 32.768MHz, 38.88MHz, 40MHz, 50MHz, 100MHz Contact us for custom frequency requirement Sine wave HCMOS 50.0Ω 15pF 5.0dBm | 1.1V ‐ 8.0dBm | 1.6V ‐ Harmonic ≤‐40.0dBc ‐ Spurious ≤‐75.0dBc ‐ Output amplitude (dBm) | Peak‐Peak(V) Frequency stability (Typical, @ 10.00MHz) Vs Operating temperature ±5.0ppb ~ ±50.0ppb Table 1 Day aging ±1.0ppb ~ ±5.0ppb Table 1 Year aging ±100.0ppb ~ ±500.0ppb Table 1 Stability vs Voltage ±5.0ppb ~ ±20.0ppb Table 1 Stability vs Load ±5.0ppb ~ ±20.0ppb Table 1 0.1ppb/S In stable temp. Without EMI/MEC or other interferences, test at25°C after power on for one hour Short‐term stability Power consumption @ 25°C Warm‐up power consumption Warm‐up time Stable power consumption 2.0W 2.0 minute max 0.6W max Voltage control characteristics Frequency pulling range (min) ±5.0ppm~±10.0ppm Central control voltage Linearity 1.65V, 2.5V ≤10% Positive slope Phase noise (Typical @ 10.00MHz) 10Hz ‐100dBc/Hz 100Hz ‐130dBc/Hz 1kHz ‐150dBc/Hz 10kHz ‐150dBc/Hz 100kHz ‐150dBc/Hz 1MHz ‐155dBc/Hz Environmental characteristics Operable working temperature Storage temperature ‐40°C ~ +105°C ‐55°C ~ +105°C Vibration Amplitude 0.75mm; acceleration: 10g; 10Hz~500Hz; a cycle per 30 min, test for 2 hr in 3 directions(X,Y,Z), IEC 68‐2‐06 Test Fc. Shock 50g; 11ms; half sine wave (3 directions X,Y,X), IEC 68‐2‐27 test Ea/severity 50A ACT (A wholly owned Acal BFi Company) +44 (0) 118 978 8878|[email protected]|www.act.co.uk ISO 9001 Registered Specifications subject to change without notification OX260 Series OCXO, Sine wave, HCMOS, 20.4 x 12.7 x 6.5mm (14pin DIL package) Table 1: Frequency stability selection (Typical, @ 10.00MHz) Temperature (°C) Temperature stability ( ppb ) Day aging ( ppb ) Year aging ( ppb ) Stability vs Voltage ( ppb ) Stability vs Load ( ppb ) ‐20°C ~ +70 ±5.0 ±1.0 ±100.0 ±5.0 ±5.0 ‐20°C ~ +70 ±10.0 ±1.0 ±100.0 ±10.0 ±10.0 ‐20°C ~ +70 ±50.0 ±5.0 ±500.0 ±20.0 ±20.0 ‐30°C ~ +75 ±5.0 ±1.0 ±100.0 ±5.0 ±5.0 ‐30°C ~ +75 ±10.0 ±1.0 ±100.0 ±10.0 ±10.0 ‐30°C ~ +75 ±50.0 ±5.0 ±500.0 ±20.0 ±20.0 ‐40°C ~ +85 ±5.0 ±1.0 ±100.0 ±5.0 ±5.0 ‐40°C ~ +85 ±10.0 ±1.0 ±100.0 ±10.0 ±10.0 ‐40°C ~ +85 ±25.0 ±5.0 ±500.0 ±20.0 ±20.0 ‐40°C ~ +85 ±50.0 ±5.0 ±500.0 ±20.0 ±20.0 ‐40°C ~ +105 ±10.0 ±10.0 ±500.0 ±10.0 ±10.0 ‐40°C ~ +105 ±20.0 ±10.0 ±500.0 ±10.0 ±10.0 ‐40°C ~ +105 ±50.0 ±5.0 ±500.0 ±10.0 ±10.0 Note : Tighter aging options: ±1.0ppb day aging and ±100.0ppb year aging available for limited frequency, please enquire Mechanical dimensions and Pin functions ACT (A wholly owned Acal BFi Company) +44 (0) 118 978 8878|[email protected]|www.act.co.uk ISO9001 Registered Specifications subject to change without notification OX 260 Series OCXO, Sine wave, HCMOS, 20.4 x 12.7 x 6.5mm (14pin DIL package) Reflow soldering curve (RoHS) ACT part numer ACT will provide a unique part number with full specification based on your requirements, please provide the following details. ACT series Frequency (MHz) Supply voltage (V) Output type Frequency stability (ppb) Operating temperature range (°C) Frequency tuning Yes No OX260 Drawing control: (Internal use only) Issue number: 1 Date : 01/06/2017 Internal reference: D1 ACT (A wholly owned Acal BFi Company) +44 (0) 118 978 8878|[email protected]|www.act.co.uk ISO9001 Registered Specifications subject to change without notification Frequency pulling (ppm) Central control voltage (Vc)