MBR1060, MBR1080, MBR1090, MBR10100 MBR1060 and MBR10100 are Preferred Devices SWITCHMODE Power Rectifiers This series of SWITCHMODE power rectifiers uses the Schottky Barrier principle with a platinum barrier metal. These state−of−the−art devices have the following features: SCHOTTKY BARRIER RECTIFIERS 10 AMPERES, 60 to 100 VOLTS Features • • • • • • • • http://onsemi.com Guard−Ring for Stress Protection Low Forward Voltage 175°C Operating Junction Temperature Epoxy Meets UL 94 V−0 @ 0.125 in Low Power Loss/High Efficiency High Surge Capacity Low Stored Charge Majority Carrier Conduction Pb−Free Packages are Available* 3 1, 4 MARKING DIAGRAM 4 Mechanical Characteristics • Case: Epoxy, Molded • Weight: 1.9 Grams (Approximately) • Finish: All External Surfaces Corrosion Resistant and Terminal • Leads are Readily Solderable Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds TO−220AC CASE 221B PLASTIC AY WWG B10x0 KA 1 3 A Y WW G B10x0 x KA = Assembly Location = Year = Work Week = Pb−Free Package = Device Code = 6, 8, 9 or 10 = Diode Polarity ORDERING INFORMATION Device Package Shipping TO−220 50 Units/Rail TO−220 (Pb−Free) 50 Units/Rail TO−220 50 Units/Rail TO−220 (Pb−Free) 50 Units/Rail TO−220 50 Units/Rail MBR1090G TO−220 (Pb−Free) 50 Units/Rail MBR10100 TO−220 50 Units/Rail TO−220 (Pb−Free) 50 Units/Rail MBR1060 MBR1060G MBR1080 MBR1080G MBR1090 MBR10100G *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. Semiconductor Components Industries, LLC, 2006 February, 2006 − Rev. 6 1 Preferred devices are recommended choices for future use and best overall value. Publication Order Number: MBR1060/D MBR1060, MBR1080, MBR1090, MBR10100 MAXIMUM RATINGS MBR Rating Symbol 1060 1080 1090 10100 60 80 90 100 Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR Average Rectified Forward Current (Rated VR) TC = 133°C IF(AV) 10 A Peak Repetitive Forward Current (Rated VR, Square Wave, 20 kHz) TC = 133°C IFRM 20 A Nonrepetitive Peak Surge Current (Surge applied at rated load conditions halfwave, single phase, 60 Hz) IFSM 150 A Peak Repetitive Reverse Surge Current (2.0 s, 1.0 kHz) IRRM 0.5 A TJ 65 to +175 °C Storage Temperature Tstg 65 to +175 °C Voltage Rate of Change (Rated VR) dv/dt 10,000 V/s Operating Junction Temperature (Note 1) V Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. The heat generated must be less than the thermal conductivity from Junction−to−Ambient: dP D/dTJ < 1/RJA. THERMAL CHARACTERISTICS Maximum Thermal Resistance, Junction−to−Case RJC 2.0 °C/W Maximum Thermal Resistance, Junction−to−Ambient RJA 60 °C/W ELECTRICAL CHARACTERISTICS Maximum Instantaneous Forward Voltage (Note 2) (iF = 10 Amps, TC = 125°C) (iF = 10 Amps, TC = 25°C) (iF = 20 Amps, TC = 125°C) (iF = 20 Amps, TC = 25°C) vF Maximum Instantaneous Reverse Current (Note 2) (Rated dc Voltage, TC = 125°C) (Rated dc Voltage, TC = 25°C) iR V 0.7 0.8 0.85 0.95 mA 6.0 0.10 2. Pulse Test: Pulse Width = 300 s, Duty Cycle ≤ 2.0%. http://onsemi.com 2 50 TJ = 150°C 20 10 100°C 125°C 10 IR , REVERSE CURRENT (mA) 150°C 5.0 3.0 TJ = 25°C 1.0 1.0 0.1 25°C 0.01 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.9 0.8 1.0 120 Figure 2. Typical Reverse Current I F(AV) , AVERAGE FORWARD CURRENT (AMPS) 6.0 dc 5.0 RATED VOLTAGE APPLIED RJC = 2°C/W 2.0 1.0 110 100 80 Figure 1. Typical Forward Voltage SQUARE WAVE 3.0 60 VR, REVERSE VOLTAGE (VOLTS) 8.0 4.0 40 vF, INSTANTANEOUS VOLTAGE (VOLTS) 10 7.0 20 0 9.0 0 125°C 100°C 0.5 120 130 140 150 (HEATSINK) RJA = 16°C/W (NO HEATSINK) RJA = 60°C/W 8.0 7.0 6.0 RATED VOLTAGE APPLIED 5.0 dc dc 4.0 3.0 2.0 1.0 0 160 SQUARE WAVE 0 20 60 40 80 100 120 140 160 TA, AMBIENT TEMPERATURE (°C) Figure 3. Current Derating, Case Figure 4. Current Derating, Ambient 10 TA = 25°C 9.0 8.0 IPK/IAV = 7.0 6.0 IPK/IAV = 5.0 5.0 IPK/IAV = 10 4.0 dc IPK/IAV = 20 3.0 SQUARE WAVE 2.0 1.0 0 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 IF(AV), AVERAGE CURRENT (AMPS) Figure 5. Forward Power Dissipation http://onsemi.com 3 140 10 9.0 TC, CASE TEMPERATURE (°C) PF(AV) , AVERAGE POWER DISSIPATION (WATTS) IF(AV) , AVERAGE FORWARD CURRENT (AMPS) i F, INSTANTANEOUS FORWARD CURRENT (AMPS) MBR1060, MBR1080, MBR1090, MBR10100 10 180 200 MBR1060, MBR1080, MBR1090, MBR10100 PACKAGE DIMENSIONS TO−220 PLASTIC CASE 221B−04 ISSUE D NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. C B Q F S T DIM A B C D F G H J K L Q R S T U 4 A 1 U 3 H K L R D G J INCHES MIN MAX 0.595 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.147 0.190 0.210 0.110 0.130 0.018 0.025 0.500 0.562 0.045 0.060 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 MILLIMETERS MIN MAX 15.11 15.75 9.65 10.29 4.06 4.82 0.64 0.89 3.61 3.73 4.83 5.33 2.79 3.30 0.46 0.64 12.70 14.27 1.14 1.52 2.54 3.04 2.04 2.79 1.14 1.39 5.97 6.48 0.000 1.27 SWITCHMODE is a trademark of Semiconductor Components Industries, LLC. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 61312, Phoenix, Arizona 85082−1312 USA Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder Japan: ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Phone: 81−3−5773−3850 http://onsemi.com 4 For additional information, please contact your local Sales Representative. MBR1060/D