Surface Mount Polymer ESD Suppressors Low Capacitance ESD0402E - ESD0603E Description This specification is applied to electrostatic discharge (ESD) protection. It is designed to protect the high-speed data lines against ESD transients. It has very low capacitance and fast turn on times makes it ideal for data and transmission lines with high data rates. According to the special property of device, we recommend not to use on such application as DC/AC power line. Features u u u u u u u u RoHS compliant, lead-free and available halogen-free Protection against ESD voltages and currents (IEC 61000-4-2 Level 4) Extremely quick response time (<1 ns) present ideal ESD protection Extremely low capacitance Extremely low leakage current Bi-directional device Surface mount device Zero signal distortion Equivalent Circuits Product Model Applicable u u u u u u u u u Antenna circuit USB2.0 / USB3.0 IEEE-1394 DVI HDMI Digital Video Equipment Mobil Phone GPS Antenna Bluetooth Communication Equipment Electrical Characteristics Leakage Current IL (μA) Peak Voltage VP (V) Trigger Clamping Voltage Voltage VT VC (V) (V) Max. Typical Typical Typical Typical Typical Max. Max. Typical Typical Typical ESD0402E002M05 5 0.01 300 300 30 0.2 0.5 1 8 15 1000 ESD0402E002M12 12 0.01 300 300 30 0.2 0.5 1 8 15 1000 ESD0603E002M05 5 0.01 300 300 30 0.2 0.5 1 8 15 1000 ESD0603E002M12 12 0.01 300 300 30 0.2 0.5 1 8 15 1000 ESD0603E002M24 24 0.01 300 250 30 0.2 0.5 1 8 15 1000 Part Number Capacitance CP @1MHz (pF) ESD Voltage Capability ESD Response Pulse Contact Contact Time Withstand Discharge Discharge (ns) (Pulses) (KV) (KV) Rated Voltage VDC (V) VP - The Peak voltage value shall be measured under the following conditions. ESD test conditions:IEC61000-4-2, 8KV contact discharge VT - Measurement by using Transmission Line Pulse (TLP) VC - Measurement by using Transmission Line Pulse (TLP) CP - Device Capacitance measured with 1Vrms SOCAY Electronics Co., Ltd. Revision November 28, 2013 www.socay.com 1/4 @SOCAY Electronics Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.socay.com for current information. Surface Mount Polymer ESD Suppressors Low Capacitance ESD0402E - ESD0603E Explanation of Part Number ESD 0402 E (1) (2) (3) 002 (4) (1) Series Type: ESD Guard TM M (5) 05 (6) Series (2) Chip Size (EIA): 0402 / 0603 (3) Series Type: EMI / ESD Protection (4) Capacitance: Value - Exxx, E002=0.2pF (5) Capacitance Tolerance: N - ±30%, M - ±20% (6) Rated Voltage, VDC Construction & Dimensions Unit: mm Symbol 0201 0402 0603 Polymer L 0.63±0.05 1.00±0.10 1.60±0.1 Ag / Ni / Sn W 0.30±0.03 0.50±0.10 0.85±0.15 H 0.23±0.05 0.34±0.10 0.51±0.05 B 0.165±0.05 0.20±0.15 0.30±0.20 A 0.35±0.05 0.50±0.10 0.75±0.10 C 0.35±0.05 0.50±0.10 0.75±0.10 D 0.35±0.05 0.50±0.10 0.75±0.10 Substrate Ceramic (Alumina) Encapsulate End termination Recommended pad outline SOCAY Electronics Co., Ltd. Revision November 28, 2013 www.socay.com 2/4 @SOCAY Electronics Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.socay.com for current information. Surface Mount Polymer ESD Suppressors Low Capacitance ESD0402E - ESD0603E Temperature Specifications Environmental Specifications Item Specifications Test Condition Reference Bias Humidity IL≤ 10μA 90%RH, 40°C ,Rated Voltage, 1000hrs MIL-STD-202 Method 103 Thermal Shock IL≤ 10μA -40°C to +85°C，30 min. cycle, 5 cycles JIS C0025 (1998)Test Na High Temperature IL≤ 10μA Rated Voltage, 85°C, 1000hrs MIL-STD-202G Method 108 Solder leach Resistance IL≤ 10μA 260°C, 10s MIL-STD-202G Method 210F Parameter Value Unit Operating Temperature -55 to +125 °C Storage Temperature --55 to +125 °C Storage Temperature 5 to 40 °C Relative Humidity <65 %RH Storage Time 12 Max Month Taping Package Storage Condition IL - Leakage current at rated voltage, the maximum leakage current was measured after reliability test. Construction & Dimensions Unit: mm Reflow Condition Pb free assembly TP Ramp-up Critical Zone TL to TP -Temperature Min (Ts(min)) +150°C -Temperature Max (Ts(max)) +200°C -Time (min to max) (TS) 60 -180 Seconds TL Pre Heat Temperature TS(max) Ramp-down TS(min) Average ramp up rate ( Liquidus Temp TL) to peak 3°C/Second Max TS(max) to TL - Ramp-up Rate 3°C/Second Max Preheat 25 Time to peak temperature (t 25℃ to peak) Time - Temperature (TL) (Liquidus) +217°C - Time (min to max) (TL) 60 -150 Seconds Reflow Precaution for soldering Note that this product will be easily damaged by rapid heating, rapid cooling or local heating. Do not give heat shock over 100°C in the process of soldering. We recommend to take preheating and gradual cooling Soldering gun procedure Note the follows, in case of using solder gun for replacement. 1) The tip temperature must be less than 280 for the period within 3 seconds by using soldering gun under 30W 2) The soldering gun tip shall not touch this product directly. Peak Temperature (TP) 260 +0/-5°C Time within 5°C of actual peak Temperature (TP) 20-40 Seconds Ramp-down Rate 6°C/Second Max Time 25°C to peak Temperature (TP) 8 minutes Max Soldering volume Note that excess of soldering volume will easily get crack the body of this product. SOCAY Electronics Co., Ltd. Revision November 28, 2013 www.socay.com 3/4 @SOCAY Electronics Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.socay.com for current information. Surface Mount Polymer ESD Suppressors Low Capacitance ESD0402E - ESD0603E Packaging Information Carrier Tape Dimensions Unit: mm Packaging method - Products shall be heat-sealed in the chip pocket, spacing Symbol 0201 0402 0603 A 8.00±0.30 8.00±0.30 8.00±0.30 B 3.50±0.05 3.50±0.05 3.50±0.05 C 1.75±0.10 1.75±0.10 1.75±0.10 D 2.00±0.05 2.00±0.05 4.00±0.05 E 4.00±0.10 4.00±0.10 4.00±0.10 F 1.50±0.10 1.50±0.10 1.50±0.10 L 0.71±0.02 1.19±0.05 2.02±0.20 W 0.39±0.03 0.69±0.05 1.27±0.15 T 0.42±0.03 0.48±0.03 0.60±0.03 pitch 2-mm of paper carrier tape with cover tape, and carrier tape shall be reeled to the reel. - Tape material to be paper. - Cover Tape adhesion to be 40±15 grams. Taping Reel Dimensions Taping Specifications Unit: mm There Shall be the portion having no product in both the head and the end of taping, and there shall be the cover tape in the heat of taping. Quantity of products in the taping package Standard Quantity 0402 10000PCS / Reel 0603 5000PCS / Reel Shipping quantity is a multiple of standard quantity SOCAY Electronics Co., Ltd. Revision November 28, 2013 www.socay.com 4/4 @SOCAY Electronics Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.socay.com for current information.