#FSLB2520-1R5M=P2 < List of part numbers with package codes > #FSLB2520-1R5M=P2 Shape Notes Rated current is specified when the decrease of the initial inductance value at 10%. (The ambient reference temperature is 20℃.) OR rated current is specified when temperature of inductor the is raised 20℃ by DC current. (The ambient reference temperature is 20℃.) Whichever is smaller. References Packaging code =P2 L size 2.5 ±0.2mm W size 2.0 ±0.2mm T size 1.7 mm Size code in inch (mm) 1008 (2520) Specifications φ180mm Embossed taping Minimum quantity 2000 Mass (Typ.) 1 piece 0.02g Specifications Inductance 1.5µH ±20% Inductance test frequency 1MHz Rated current 435mA Max. of DC resistance 0.38Ω Self resonance frequency (min.) 95MHz Operating temperature range (Self-temperature rise is included) -40〜85℃ Class of magnetic shield No Shield Series LLB2520 1 of 2 1.This datasheet is downloaded from the website of Murata Manufacturing Co., Ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2.This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. URL : http://www.murata.com/ Last updated: 2017/06/02 Chart of characteristic data (The charts below may show another part number which shares its characteristics.) Q-Frequency characteristics (Typ.) 2 of 2 1.This datasheet is downloaded from the website of Murata Manufacturing Co., Ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2.This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Last updated: 2017/06/02