TAB NTDM-48-31 1500-3000 watt single output switching power supply Datasheet

APPLIED POWER CONVERSION
Division of
TECHNOLOGY DYNAMICS INC.
NTDM SERIES
1500-3000 WATT SINGLE OUTPUT
SWITCHING POWER SUPPLIES
5” x 8” x 12.5”
POWER FACTOR CORRECTED, MILITARIZED
APPLICATIONS
The NTDM series of “BULK” Power Rugged
AC-DC power supplies provides highly
regulated output power to 3000 watts.
Rugged construction and superior quality
make this power supply ideal for harsh
environment applications. Available in
standard, modified or fully custom
configurations, for industrial, commercial,
COTS, ruggedized and Military applications.
SPECIFICATIONS
STANDARD FEATURES
•
•
•
•
•
•
•
•
High Efficiency Up to 90%
Rugged Construction
AC Input 100-132/180-264 VAC
Built In DC Fan for Cooling
OV, OL, OT Protection
DC Good Signals
Remote on/off & Remote Sense Functions
±10% Voltage Adjust
AVAILABLE OPTIONS
•
•
•
•
•
•
•
•
Active PFC (Power Factor Correction)
Parallel Operation
3 Phase Input
ORing Diode for Redundant Operation
Rack / Panel Mount
Ruggedized for shock & vibration
400 Hz Operation
Conformal Coated
SAFETY AND EMISSIONS
•
•
•
•
•
Designed to meet UL/cUL60950-1
Designed to meet TUV EN60950-1
Designed to meet CB Report (IEC 60950-1)
Designed to meet CE Mark (LVD)
Designed to meet EN55022
Class B (CISPR 22 B)
INPUT SPECIFICATIONS:
Input: Input Range (1500W) 90-132VAC/(2000-3000W) 180-264VDC 1Ø or 3Ø
Input Frequency: 47-63Hz (400Hz Optional)
Inrush Current: 30A at 115VAC/40A at 230 VAC (Cold Start)
Input Current: 1500W=24A, 2000W=16A, 2500W=20A, 3000W=24A
Efficiency: 83-90% Typical (Depending On Output Model)
Hold-up time: 20ms At Full Load (Minimum)
Leakage Current: <2.0mA maximum @ 240 VAC
OUTPUT SPECIFICATIONS
Adjustment Range: ±10% (Minimum)
Minimum Load: None
Regulation: Line ± 0.5% Load ± 0.5%
Ripple/Noise: 200mV Peak To Peak Maximum (20 MHz)
Set Point Accuracy: ±1%(Except 5V=±2%) (Maximum)
Output Voltage Adj: ±10% Minimum
Overcurrent Protection: 105-125% Automatic Recovery Constant Current
Overvoltage Protection: 115-140% Of V1 Nominal
Overtemperature Protection Heatsink Temp. 90°C ± 5°C Auto Recovery
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature: -20°C to +50°C. Derate to 50% at +70°C
Storage Temperature: -40°C to +85°C Max
Cooling: Internal Ball Bearing DC Fan
Humidity: 20-90% RH Non Condensing
Weight: Approx: 12 Lbs
Size: 5” x 8” x 12.5”
Design Excellence since 1976!
MODEL SELECTION
1500 WATT OUTPUT
2000 WATT OUTPUT
2500 WATT OUTPUT
NOMINAL
VALUE
(VDC)
MAXIMUM
CURRENT
(ADC)
MODEL
MAXIMUM
CURRENT
(ADC)
5V
300A
NTDM-5-300
12V
125A
NTDM-12-125
15V
100A
NTDM-15-100
24V
62A
NTDM-24-62
84A
NTDM-24-84
104A
28V
54A
NTDM-28-54
72A
NTDM-28-72
48V
31A
NTDM-48-31
42A
110V
14A
NTDM-110-14
18A
MAXIMUM
CURRENT
(ADC)
3000 WATT OUTPUT
MAXIMUM
CURRENT
(ADC)
MODEL
NTDM-24-104
125A
NTDM-24-125
89A
NTDM-28-89
107A
NTDM-28-107
NTDM-48-42
52A
NTDM-48-52
62A
NTDM-48-62
NTDM-110-18
22A
NTDM-110-22
27A
NTDM-110-27
MODEL
MODEL
CONSULT FACTORY
Note: 2000 Watts - 3000 Watts Require 230 VAC Input.
Note: Other Voltages and Currents Available, Contact the Factory.
OPTION DESIGNATIONS
- PFC
Power Factor Correction
- PAR
Parallel Operation
Conformal Coating
- CC
400Hz Operation
- 400Hz
Ruggedized for Shock/Vibration
- 3P
3 Phase Input
- RK
Rack Mount
- ORD
Redundant Operation
- HS
Hot Swap
- PNL
Panel Mount
- MIL
Note: Other Options Available, Contact the Factory.
MECHANICAL OUTLINE
Rev.A
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
TECHNOLOGY DYNAMICS INC.
100 School Street, Bergenfield, NJ 07621
Phone: (201) 385-0500, Fax: (201) 385-0702
www.technologydynamicsinc.com
Similar pages