CER0293A 2600 MHz BPF Rev 2 – Origin Date: April 7, 2006 – Revision Date: May 17, 2006 Features • Low Loss • Low Ripple • Small Size Description Surface mount, silver (Ag) coated ceramic filter for use in broadband applications. Weight: 1.1 grams typical Material: Filter is composed of a ceramic block plated with Ag Filter complies with RoHS standards. Electrical Specifications Parameter Passband Iloss Passband Return Loss @ TX Passband Return Loss @ Ant Attenuation Frequency MHz Typical @ 25ºC Specification @ 25ºC Spec over -40ºC to +85ºC 2420 - 2720 2420 - 2720 2420 - 2720 2180 3000 -1.6 -11.0 -11.0 -32.0 -31.0 -2.0 -8.0 -8.0 -25.0 -25.0 -2.2 -8.0 -8.0 -25.0 -25.0 Power into any port 1 Watt max Note: Supplier shall test each filter to the critical electrical specifications of the above table. Any subsequent audits may deviate from in value due to measurement repeatability among different test systems. Such deviations shall not exceed the following limits: Specification Allowance Insertion Loss 0.1 dB Return Loss 1.0 dB Stopbands 1.0 dB •“This product is covered by one or more of the following U.S. and foreign patents including: US 4,692,726;US 4,742,562; US 4,800,348;US 4,829,274;US 5,146,193;EP 0573597;DE 0573597;FR 0573597;JP 508149/92;KR 142171;US 5,162,760;US 5,218,329;US 5,250,916;US 5,327,109;US 5,488,335;CA 2114029;FR 9306297;GB 2273393;JP 3205337;KR 115113;CN 93106228.4;US 5,512,866;EP 0706719;DE 0706719;FR 0706719;GB 0706719;CN 95190359.4;US 5,602,518;US 5,721,520;US 5,745,018;EP 0910875;DE 0910875;DK 0910875;FR 0910875;GB 0910875;IE 0910875;JP 505182/98;KR 10-323013;US 5,994,978;US 6,462,629;CN 00810420.4;US 6,559,735;US 6,650,202;US 6,834,429.Other US and foreign patents pending. •CTS Corporation 2006 reserves all copyrights in the layout, design and configuration of the patterns on this product.” Document No. 008-0256-0 Page 1 of 2 - CTS Electronic Components - www.ctscorp.com - 171 Covington Drive - Bloomingdale, IL 60108 - Rev. X4VH CER0293A 2600 MHz BPF Rev 2 – Origin Date: April 7, 2006 – Revision Date: May 17, 2006 Mechanical Drawing Dim Nominal (mm) A B C D E F G H J Electrical response 2000 2200 2400 2600 9.91 1.50 1.50 0.95 0.95 4.88 3.10 4.00 0.80 Tolerance (mm) +/- or max Max 0.13 0.13 0.13 0.13 0.13 Max Max 0.13 PCB Layout 2800 3000 0 40 -10 30 -20 20 -30 10 -40 0 -50 -10 -60 -20 -70 -30 -80 -40 Packaging and Marking DIMENSION REEL DIAMETER REEL WEIGHT REEL QUANTITY UNITS SPECIFICATION mm kg ea. 330 0.8 1000 Customer Feed Direction Product Marking CTS 293 YWW Document No. 008-0256-0 Page 2 of 2 - CTS Electronic Components - www.ctscorp.com - 171 Covington Drive - Bloomingdale, IL 60108 - Rev. X4VH