SPECIFICATIONS 1/9 1. Scope of Application These specifications are applied to the chip type LED lamp , model CL-L251-MC6W1 2. Part code C L - L 2 5 1 - M C6 W1 Series L251 : White power LED for general lighting. Special specifications M : General Color Rendering Index Typ. 85 Type. Watt Class C6 : 6 watt package. Lighting color W1 : Energy Star Correlated Color Temperature 4000(K) Approved Checked Drawn Symbol CITILED Name CL-L251-MC6W1 Drawing No Mark Date Description Appro. CITIZEN ELECTRONICS CO.,LTD. Ref.CE-P458 04/09 SPECIFICATIONS 2/9 3. Outline drawing Cathode Tc Measurement Point Anode Anode ×12 ×12 ×12 Cathode Tolerances unless otherwise specified : ± 0.3mm Unit : mm 4. Performance ( 1 ) Absolute Maximum Rating Parameter Rating Value Symbol Unit 8.9 Power Dissipation Pd W 0.84 Forward Current IF A 1.2 Forward Pulse Current IFP A *1 1 Reverse Current IR mA -30 ～ +85 Operating Temperature TOP ℃ Storage Temperature TST ℃ -40 ～ +100 Junction Temperature Tj Max ℃ *2 120 *1Forward Current : Duty≦1/10 , Pulse Width≦10msec *2 D.C. Current : Tj = Tc + Rj-c x Pd Pulse Current : Tj = Tc + Rj-c x Pw(Power Dissipation / one-Pulse) x duty Approved Checked Drawn Symbol CITILED Name CL-L251-MC6W1 Drawing No Mark Date Description Appro. CITIZEN ELECTRONICS CO.,LTD. Ref.CE-P458 04/09 SPECIFICATIONS ( 2 ) Electro-optical Characteristics Symbol Condition Parameter 3/9 MIN TYP MAX ( Tc=25℃ ) Unit Forward Voltage VF IF=720mA 8.75 9.30 10.5 V Reverse Current Thermal resistance IR RJ-C VR=15V Junction-case - 4.0 100 - μA ℃/W Luminous Flax φV IF=720mA 345 430 - lm High General Color Rendering Index Ra IF=720mA 80 85 - - Chromaticity coordinates ( Condition : IF=720mA ,Tc=25℃ Color Rank x y 0.4006 0.4044 0.3736 0.3874 W1 0.3670 0.3578 0.3898 0.3716 0.4006 0.4044 0 0 0.41 0.40 y 0.39 0.38 0.37 0.36 0.35 0.36 0.37 0.38 0.39 0.40 0.41 x Note 1) The tolerance of measurement at our tester is VF±3% , φv±10% , Chromaticity(x,y)±0.01. Note 2) For handling ,please apply CMOS LSI or equivalent any electrostatic effect. Approved Checked Drawn Symbol CITILED Name CL-L251-MC6W1 Drawing No Mark Date Description Appro. CITIZEN ELECTRONICS CO.,LTD. Ref.CE-P458 04/09 SPECIFICATIONS 4/9 5. Characteristics ◆Forward Current vs. Relative Luminous Flux Tc=25℃ If - Vf Characteristics 1.4 9.6 1.2 9.4 1.0 9.2 0.8 9.0 VF (V) φv (a.u) If - φv Characteristics ◆Forward Current vs. Forward Voltage 0.6 8.6 0.2 8.4 8.2 0 200 400 600 If (mA） 800 400 600 If (mA） 800 Tc - Chromaticity Characteristics Tc=25℃ ⊿x ⊿y 800 200 1000 1000 ◆Case Temperature vs. Chromaticity Coordinate ⊿x,⊿y If - Chromaticity Characteristics 0.020 0.015 0.010 0.005 0.000 -0.005 -0.010 -0.015 -0.020 0 200 400 600 If(mA） 0 1000 ◆Forward Current vs. Chromaticity Coordinate ⊿x,⊿y 8.8 0.4 0.0 Tc=25℃ If=720mA 0.020 0.015 0.010 0.005 0.000 -0.005 -0.010 -0.015 -0.020 ⊿x ⊿y 0.0 Approved Checked 20.0 Drawn 40.0 60.0 80.0 Tc(℃） 100.0 120.0 Symbol CITILED Name CL-L251-MC6W1 Drawing No Mark Date Description Appro. CITIZEN ELECTRONICS CO.,LTD. Ref.CE-P458 04/09 SPECIFICATIONS ◆Case Temperature vs. Forward Voltage Tc－Vf Characteristics ◆Case Temperature vs. Relative Luminous Flux If=720mA 100% 100% 90% 90% 80% If=720mA 80% 70% 70% 60% 60% 50% 50% 0.0 20.0 40.0 60.0 Tc(℃) 80.0 100.0 0.0 120.0 ◆Case Temperature vs. Allowable Forward Current 120% Relative luminous 900 800 700 600 500 400 300 200 100 0 0 25 50 75 Tc(℃) 100 125 20.0 40.0 60.0 Tc(℃) 80.0 100.0 120.0 ◆Spectrum Tc-IF Characteristics IF(mA) Tc－φv Characteristics 110% φv(a.u) Vf(a.u) 110% 5/9 Spectrum If=720mA 100% 80% 60% 40% 20% 0% 350 Approved Checked 450 550 650 Wavelength (nm) Drawn 750 850 Symbol CITILED Name CL-L251-MC6W1 Drawing No Mark Date Description Appro. CITIZEN ELECTRONICS CO.,LTD. Ref.CE-P458 04/09 SPECIFICATIONS 6/9 6. Reliability (1)Details of the tests Test Item Room Temperature Operating Life Test High Temperature Operating Life Test Low Temperature Storage Test High Temperature Storage Test Test Condition Ta=25℃,IF=480mA(Tj=61.5℃)×1000 hours (with Al-fin) Ta=50℃,IF=480mA(Tj=86.3℃)×1000 hours (with Al-fin) -40℃× 1000 hours 100℃× 1000 hours 60±2℃, 90±5%RH for 1000 hours Moisture proof Test Thermal Shock Test -40℃×30minutes - 100℃× 30minutes,100 cycle (2)Judgment Criteria of Failure for Reliability Test (Ta=25℃) Measuring Item Symbol Measuring Condition Judgement Criteria for Failure VF Forward Voltage IF=480mA >U×1.1 ΦV Total Luminous Flux IF=480mA <S×0.85 U defines the upper limit of the specified characteristics.S defines the initial value. Note: Measurement shall be taken between 2 hours and 24 hours, and the test pieces should be returned to the normal ambient conditions after the completion of each test. CL-L251-MC6L reliability test results will be used for CL-L251-MC6W1. Approved Checked Drawn Symbol CITILED Name CL-L251 Series Drawing No Mark Date Description Appro. CITIZEN ELECTRONICS CO.,LTD. Ref.CE-P458 04/09 SPECIFICATIONS 7/9 7. Packing Specifications (1) Packing One packing includes 240 pieces of LED packages. So, packing unit is 240 pieces. Note : All LED packages are placed on the tray individually. One tray includes 48 pieces of LED packages. In the packing, five trays filled with LED packages and one empty tray are stacked. The empty one tray is put on the top of trays and attached the indication label which specifies product name, quantity, lot number . Tray (Dimensions: 310 × 200 × 14.6mm / Materials: Electrically conductive PS) < Packing figure > 310 14.6 Example of indication label 210 CUSTOMER CL- L250 TYPE CL-L251-MC3W1 P.NO Lot No XXXXXX Q'ty pcs PASS CITIZEN ELECTRONICS Approved Checked Drawn Symbol CITILED Name CL-L251 Series Drawing No Mark Date Description Appro. CITIZEN ELECTRONICS CO.,LTD. Ref.CE-P458 04/09 SPECIFICATIONS 8/9 Precautions 1. Avoid the application of any stress to the Resin. 2. Avoid any contact by a sharp metal nail or other materials with the Resin portion. Resin portion (Shaded area) 11.5m m 3. This product should be secured firmly by fastening an M3 screw on both sides of the product. Please be careful not to apply any stress to the product during the clamping operation. As the connection status could vary depending on materials of outer heat sink, please check thoroughly. 12mm Recommended installation screw pitch M3 screw Thermal conductive silicone grease Outer heat sink 4. A heat radiating grease should be applied to the whole rear surface so that this product can dissipate heat as a whole. This product could be bent during the clamping operation if heat grease in sheet form is used. For this reason, it is recommended that grease in paste form is used. 5. Handling of static electricity - These products are sensitive to static electricity charge. Please take measures to prevent any static electricity being produced such as the wearing of a wristband or anti-static gloves when handling this product. - All devices, equipment and machinery must be properly grounded. It is recommended that CE'sagainst lighting inspection precautions be taken surge voltagecriterion to the equipment that mounts the LEDs. - When inspecting the final products in which LEDs were assembled, it is recommended to check whether the assembled LEDs are damaged by static electricity or not. It is easy to find static-damaged LEDs by a light-on test. *Light-on test criterion Condition Judgmental criterion IF=1mA / die No-lighting should not exist. - ESD tolerance of this product is 1kV (HBM, based on JEITA ED-4701/304). Approved Checked Drawn Symbol CITILED Name CL-L251 Series Drawing No Mark Date Description Appro. CITIZEN ELECTRONICS CO.,LTD. Ref.CE-P458 04/09 SPECIFICATIONS 9/9 Precautions (continued) 6. Please be aware that this product should not come into contact with other parts in assembled status. 7.Drive circuit - A constant current circuit is recommended as a drive circuit. And when two or more LED packages are connected, the series connection between each package is recommended. - Please design a circuit that prevents any reverse voltage (excess current) from being applied to this product instentaneously when the circuit is ON or OFF. 8. Heat generation - As this product is designed with consideration of the heat release property of module, a heat release design is required to use this product efficiently. Please ensure that heat generation is not in excess of the absolute maximum rating. (Refer to 4-1 Performance) - Factors responsible for an increase in temperature include heat generation attributed to ambient temperature conditions or power dissipation. Thus, drive conditions should be taken into consideration, depending on ambient temperature (Ta). 9. Recommended soldering - Soldering operation should be performed within 3.5 seconds per land using a soldering iron of 40W or lower. The temperature of a soldering iron should be adjusted 350C or lower. - No external force is applied to sealing resin during soldering operation. - Please do not handle a product until it returns to a normal temperature. Note: This product is not adaptable to reflow process. 10. Other - This product complies with RoHs directives. - This product is intended for the application in general electronic devices (such as office automation equipment, communication devices, audio-video equipment, home electrical appliances, measurement hardware and others). In cases where this product is used for the applications that requires high reliability or could directly affect human life or health due to failure or malfunction (aerospace hardware, medical equipment, atomic control equipment and others), please consult with our sales representatives beforehand. - Our warranty does not cover situations where this product undergoes secondary fabrication such as changes in shape. -An agreement of formal product specifications is required prior to mass production. - The specifications and appearance of this product are subject to change without advanced notice. Approved Checked Drawn Symbol CITILED Name CL-L251 Series Drawing No Mark Date Description Appro. CITIZEN ELECTRONICS CO.,LTD. Ref.CE-P458 04/09