Keysight Technologies General Purpose Switch Modules M9130A, M9131A, M9132A, M9133A, M9135A Data Sheet Introduction Product description The PXI general purpose switch modules offer a variety of switch designs enabling you to select the best configuration for your test application. Choose a switch optimized for high speed or high power, available in either Form A (single-pole, single-throw) or Form C (single-pole, double-throw) configurations. The individual modules range from 20 channels up to 100 channels. The general purpose switches manage system controls by cycling power to your device under test (DUT), setting indicators and status lights, or actuating external power relays and solenoids. Installation and configuration is fast and easy with standard cable connections or an optional connector block, soft front panels, and Keysight Connection Expert. In addition, software drivers support the most common programming environments such as Visual Studio, C, C++, Visual Basic, MATLAB, and LabVIEW. Applications –– Aerospace and defense –– Automotive –– Electronic test –– Medicalemiconductor Features –– Multiple configurations for fast and reliable high-density general purpose switching –– Up to 100-channel general purpose armature relays –– Power relay module –– Software drivers support the most common programming environments –– Optional connector blocks offer reliable measurements from robust, high-pincount interconnects –– Easy programming and control with soft front panels and Keysight Command Expert Uncompromising values –– High-density general purpose switching in a compact PXI module –– Get the performance you need to switch heavy loads with up to 300 W (DC resistive load)/1250 W (AC resistive load) –– Work in your programming environment of choice and reduce development time –– Fast and easy module installation and configuration –– Easier and faster PXI test system development 03 | Keysight | General Purpose Switch Modules - Data Sheet Easy Setup, Test and Maintenance Hardware platform Software applications Compliance Keysight soft front panels provide easy-to-use instrument communications. The PXI general purpose switch graphical user interface guides developers through module setup so users can quickly configure the switch states. Switch control is also possible through the wide selection of instrument program interfaces. The general purpose switch modules are PXI compliant with a J1 connector and can be used in PXI chassis with cPCI (J1), PXI-1 (J1 only), or PXIe hybrid slot connectors. The PXI format offers high performance in a small, rugged package. It is an ideal deployment platform for many automated test systems. In addition, a wide selection of complementary PXI products are currently available, such as multimeters, waveform generators, local oscillators, and digitizers. Software platform IO Libraries Keysight IO Libraries Suite offers fast and easy instrument connections and now extends to modular instruments. IO Libraries Suite 16 (or greater) adds support for PXI, helping you display all of the modules in your system, whether they are PXI, PXIe, or AXIe, as well as view information about installed software. In addition, the new version allows you to more easily find the right driver and start module soft front panels directly with Keysight Connection Expert. Drivers Keysight Technologies, Inc. provides instrument drivers that work with your choice of software, saving time and preserving software and hardware investments. Keysight modular instruments come with IVI-COM, IVI-C, and LabVIEW software drivers that work in the most popular test and measurement development environments including LabVIEW, MATLAB, LabWindows/CVI, Visual Studio C, C++, C#, VEE, and Visual Basic. With a broad selection of drivers already included, any Keysight PXI general purpose switch can be swapped out, replaced, or upgraded with the latest version, requiring only minimal software adjustments. Easy software integration In addition, application code examples are included for LabVIEW, LabWindows/CVI, Visual Studio C, C++, C#, Visual Basic, and MATLAB, providing switch setup and basic functionality. These application code examples are easily modified to quickly integrate the switch module into your measurement system. Figure 1. General purpose switch soft front panel 04 | Keysight | General Purpose Switch Modules - Data Sheet Specifications and Characteristics Specification and characteristic summary Following is a summary of specifications and characteristics for the Keysight PXI general purpose switches. More detailed specifications and characteristics for each module are featured later in this document. General purpose switch specification and characteristic summary General Description Type# Channels Switch purpose slots speed switches (typical) M9130A SPDT switch PXI 1-slot 26 Form C 2.7 msec M9131A SPDT switch PXI 1-slot 64 Form C 2 msec M9132A SPST switch PXI 1-slot 50 Form A 0.35 msec M9133A SPST switch PXI 1-slot 100 Form A 0.35 msec M9135A SPST switch PXI 1-slot 20 Form A 10 msec 1. Not for connection to mains Max voltage (typical) 250 Vrms1 100 Vrms1 100 Vrms1 100 Vrms1 250 Vrms/ 125 Vdc Current switch/ carry (typical) 2 A/2 A 0.25 A/1 A 1 A/1 A 1 A/1 A 5 A/5 A Relay type Connectors Armature Reed Reed Reed Armature 78 Dsub connector block or cable 200 LFH connector block or cable 200 LFH connector block or cable 200 LFH connector block or cable 20 MSM connector block or cable 05 | Keysight | General Purpose Switch Modules - Data Sheet Specifications and Characteristics M9130A PXI SPDT switch: 26-ch, armature relays The M9130A provides 26 channels using single-pole, doublethrow (Form C) armature relays. This module design allows you to switch voltages up to 250 Vrms and current up to 2 A. The M9130A module is ideal for switching medium-power AC and DC loads, or slave-switching larger relays or solenoids. Easily connect to the front panel using a 78-pin, Dsub connector or cable. M9130A specifications and characteristics General specifications Channels Switch type Max volts Max current switch/carry Switching characteristics (nominal) Max power Switch speed (typical) Inital path resistance (typical) Connectors Bandwidth DC isolation, Ch-Ch, Ch-Gnd 25C / 40%RH (typical) 25C / 80%RH (typical) 40C / 80%RH (typical) Thermal offset (typical) Relay life, operations Low power load (typical) Rated power load (typical) Figure 3. 78-pin Dsub connector block Figure 2. M9130A 26-ch, SPDT, armature relays 26 SPDT, Form C, armature 250 Vrms 2A/2A 60 W 2.7 msec < 500 mΩ 78 Dsub connector block or cable 5 MHz 1x1010 Ω 1x10 8 Ω 1x107 Ω 15 μV > 2.5x10 6 > 1x105 06 | Keysight | General Purpose Switch Modules - Data Sheet Specifications and Characteristics M9131A PXI SPDT switch: 64-ch, reed relays The M9131A provides 64 channels using single-pole, doublethrow (Form C), high-speed, long-life reed relays. The module is designed for switching applications with signals up to 100 Vrms and 1 A, with up to 3 W power. Easily connect to the module through a high-density, 200-pin low force helix (LFH) connector or cable. M9131A specifications and characteristics General specifications Channels Switch type Max volts Max current switch/carry Switching characteristics (nominal) Max power Switch speed (typical) Inital path resistance (typical) Connectors Bandwidth DC isolation, Ch-Ch, Ch-Gnd 25C / 40%RH (typical) 25C / 80%RH (typical) 40C / 80%RH typical) Thermal offset (typical) Relay life, operations1 Low power load (typical) Rated power load (typical) 1. Relay life is defined as path resistance <1.1 Ω Figure 5. 200 pin LFH connector block Figure 4. M9131A 64-ch, SPDT, reed relays 64 SPDT, Form C, reed 100 Vrms 0.25 A/1.0 A 3W 2.7 msec 400 mΩ 200 LFHconnector block or cable 10 MHz 1x1010 Ω 1x10 8 Ω 1x10 6 Ω 50 μV 1x109 >1x10 6 07 | Keysight | General Purpose Switch Modules - Data Sheet Specifications and Characteristics M9132A PXI SPST switch: 50-ch, reed relays The M9132A switch module is a general purpose, 50- channel, single-pole, single-throw (Form A) switch array. The module is designed with high-speed reed relays that enable switching for signals up to 100 Vrms and 1 A to 25 W power. The switches are ideal for powering your product on/off under test, or to actuate power relays and solenoids. Easily connect to the module through a high-density, 200-pin, low force helix (LFH) connector or cable. M9132A specifications and characteristics General specifications Channels Switch type Max volts Max current switch/carry Switching characteristics (nominal) Max power Switch speed (typical) Inital path resistance (typical) Connectors Bandwidth DC isolation, Ch-Ch, Ch-Gnd 25C / 40%RH (typical) 25C / 80%RH (typical) 40C / 80%RH typical) Thermal offset (typical) Relay life, operations1 Low power load (typical) Rated power load (typical) 1. Figure 6. M9132A 50-ch, SPST, reed relays. Relay life is defined as path resistance <1.3 Ω 50 SPDT, Form A, reed 100 Vrms 1 A/1 A 25 W .35 msec <500 mΩ 200 LFHconnector block or cable 5 MHz 1x1010 Ω 1x10 8 Ω 1x10 6 Ω 50 μV 1x109 >1x10 6 08 | Keysight | General Purpose Switch Modules - Data Sheet Specifications and Characteristics M9133A PXI SPST switch: 100-ch, reed relays For test environments that require many switches, such as manufacturing or R&D testing, the M9133A provides 100 channels of single-pole, single-throw (Form A), high-speed reed relays. Each channel has the ability to manage switching of 100 Vrms and 1 A, with up to 20 W power. Easily connect to the module through a high-density, 200-pin low force helix (LFH) connector or cable. M9133A specifications and characteristics General specifications Channels Switch type Max volts Max current switch/carry Switching characteristics (nominal) Max power Switch speed (typical) Inital path resistance (typical) Connectors Bandwidth DC isolation, Ch-Ch, Ch-Gnd 25C / 40%RH (typical) 25C / 80%RH (typical) 40C / 80%RH typical) Thermal offset (typical) Relay life, operations1 Low power load (typical) Rated power load (typical) 1. Figure 7. M9133A 100-ch, SPST, reed relays Relay life is defined as path resistance <1.4 Ω 100 SPDT, Form A, reed 100 Vrms 1 A/1 A 25 W .35 msec <500 mΩ 200 LFHconnector block or cable 5 MHz 1x1010 Ω 1x10 8 Ω 1x10 6 Ω 50 μV 1x109 >1x10 6 09 | Keysight | General Purpose Switch Modules - Data Sheet Specifications and Characteristics M9135A PXI 20-ch SPST switch For your high power switching needs, the M9135A module provides 20 channels of single-pole, single-throw (Form A) relays suitable for switching inductive or capacitive loads. The module design consists of heavy-duty armature relays rated for resistive loads up to 300 W DC or 1250 W AC. Applications benefiting from this module include switching of heavy AC or DC loads, power supplies, and large system relays and solenoids. Connect to the front panel using the 20-pin MS-M connector or cable. M9135A specifications and characteristics General specifications Channels Switch type Max volts Max current switch/carry Switching characteristics (nominal) Max power Switch speed (typical) Inital path resistance (typical) Connectors Bandwidth DC isolation, Ch-Ch, Ch-Gnd 25C / 40%RH (typical) 25C / 80%RH (typical) 40C / 80%RH typical) Thermal offset (typical) Relay life, operations1 Low power load (typical) Rated power load (typical) 1. Figure 8. M9135A 20-ch, SPST, 10A, 300W Relay life is defined as path resistance <0.2 Ω 20 SPDT, Form A, reed 250 Vrms/125 Vdc 5 A/5 A 300 W 10 msec 35 mΩ 20 MSMconnector block or cable >20 MHz 1x1010 Ω 1x10 8 Ω 1x10 6 Ω 50 μV 1x109 >1x10 6 10 | Keysight | General Purpose Switch Modules - Data Sheet Specifications and Characteristics General specifications Slot type Connector type PXI 1-slot M9130A M9131A 78 D connector block 200 LFH connector block or cable or cable Environmental characteristics1, 2 Temperature Relative humidity EMC Safety Altitude under relative humidity Warm-up time M9132A 200 LFH connector block or cable M9133A 200 LFH connector block or cable M9135A 20 MSM connector block or cable Operating: 0 °C to 55 °C Non-operating: -40 °C to +70 °C Relative humidity: Up to 95% R.H. at 40 ˚C, non-condensing, pollution degree 1 European EMC Directive 2004/108/EC - IEC/EN 61326-1 - CISPR Pub 11 Group 1, Class A - AS/NZS CISPR 11 - ICES/NMB-001 Canadian ISM device ICS-001 European Low Voltage Directive 2006/95/EC - ETL, UL/IEC/EN 61010-1, 2nd Edition Altitude: up to 4.6 km (15,000 ft) 15 minutes, max 1. Samples of this product have been type tested in accordance with the Keysight Environmental Test Manual and verified to be robust against the environmental stresses of storage, transportation, and end-use; those stresses include, but are not limited to temperature, humidity, shock, vibration, altitude, and power line conditions. 2. Test methods are aligned with IEC 60068-2 and levels are similar to MIL-PRF-28800F class 3. Physical characteristics Dimensions –– 3U/1-slot PXI/CompactPCI standard –– Connector slot compatibility: cPCI (J1), PXI 1, PXIe hybrid slot –– Front panel complies with IEEE1101.10 certification and compliance Weight M9130A M9131A M9132A 190 g 230 g 300 g (.42 lbs) (.51 lbs) (.66 lbs) M9133A 240 g (.53 lbs) M9135A 300 g (.66 lbs) Table 9 Power requirements +3.3 V +5 V +12 V M9130A 0 500 mA (400 ma typ) 0 M9131A 0 1A M9132A 0 500 mA M9133A 0 500 mA M9135A 0 200 mA 0 0 0 15 mA per relay 11 | Keysight | General Purpose Switch Modules - Data Sheet Specifications and Characteristics System requirements Topic Operating systems Processor speed Available memory Available disk space1 Video Browser Windows 7 and Vista Requirements Windows 7 (32-bit and 64-bit) Windows Vista, SP1 and SP2 (32-bit and 64-bit) 1 GHz 32-bit (x86), 1 GHz 64-bit (x64) (no support for Itanium 64) 4 GB minimum 8 GB or greater recommended 1.5 GB available hard disk space, includes: –– 1 GB available for Microsoft .NET Framework 3.5 SP12 –– 100 MB for Keysight IO Libraries Suite Support for DirectX 9 graphics with 128 MB graphics memory recommended (Super VGA graphics is supported) Microsoft Internet Explorer 7.0 or greater Windows XP Requirements Windows XP, Service Pack 3 600 MHz or higher required 800 MHz recommended 3 GB minimum 1.5 GB available hard disk space, includes: –– 1 GB available for Microsoft .NET Framework 3.5 SP12 –– 100 MB for Keysight IO Libraries Suite Super VGA (800 x 600) 256 colors or more Microsoft Internet Explorer 6.0 or greater 1. Because of the installation procedure, less memory may required for operation than is required for installation. 2. NET Framework Runtime Components are installed by default with Windows Vista and Windows 7. Therefore, you may not need this amount of available disk space. 12 | Keysight | General Purpose Switch Modules - Data Sheet Setup and Calibration Services Assistance One day startup assistance Calibration and Traceability Factory Calibration Calibration Cycle Calibration Sites R1282A Annual Calibration Service A Keysight Technologies applications engineer will help you get started and install the modules in a chassis, configure the controller, load software and make first measurements. Included in base configuration Keysight’s modular products M9130A, M9131A, M9132A, M9133A, M9135A are factory calibrated and shipped with an ISO-9002, NIST-traceable calibration certificate. A one year calibration cycle is recommended. –– At Keysight Worldwide Service Centers –– On-site by Keysight –– By self-maintainers –– Keysight Calibration –– Keysight Calibration + Uncertainties –– Keysight Calibration + Uncertainties + Guardbanding –– Standards Compliance –– ANSI Z540.3-2006, ISO 17025:2005, ANSI Z540-1-1994, ISO 9001:2008 Included in base configuration More information on www.keysight.com/find/infoline Additional service, not included in the warranty 13 | Keysight | General Purpose Switch Modules - Data Sheet Configurations and Ordering Hardware Model Each switch includes: M9130A M9131A M9132A M9133A M9135A Related products Description Getting started guide, software drivers, and Keysight I/O libraries PXI general purpose SPDT switch: 26-ch, 2 A, armature relays PXI general purpose SPDT switch: 64-ch, 100 Vrms/1A, reed relays PXI general purpose SPST switch: 50-ch, 100 Vrms/1A, reed relays PXI general purpose SPST switch: 100-ch, 100 Vrms/1A, reed relays PXI SPST switch: 20-ch, 5A, 300 W Accessories M9130A Y1181A Description PXI connector block: 78-pin, shielded, female DSub Y1187A PXI connector cable: 78-pin, male-to-female, 1 meter PXI connector cable: 78-pin, male-to-female, 2 meter Description PXI connector block: 200-pin, shielded, male Y1188A M9131A, 32A, 33A Y1182A Y1189A Y1190A M9135A Y1191A Y1192A Y1193A PXI connector cable: 200-pin, LFH male to four 50 pin Dtype female connectors, 1 meter PXI connector cable: 200-pin, LFH male to four 50 pin Dtype female connectors, 2 meter Description PXI power cable: 20-pin, female-to-unterminated, 1 meter PXI power cable: 20-pin, female-to-unterminated, 2 meter PXI power connector: 20-pin, female (universal), solder pin Note: Although not required, the Positronic Industries 9099-0-0 Terminal Insertion Tool and the 9081-0-0 Terminal Removal Tool are recommended. Model M9018A Description 18-slot PXIe chassis: 18-slot, 3U, 8GB/s M9021A PCIe® cable interface: Gen 2, x8 M9045B PCIe ExpressCard adaptor: Gen 1 Y1200B PCIe cable: x4 to x8, 2.0m (used with M9045B) M9048A PCIe desktop PC adapter: Gen 2, x8 Y1202A PCIe cable: x8, 2.0m (used with M9048A) Software Model Description Supported operating Microsoft Windows XP (32-bit), systems Microsoft Windows Vista (32/64-bit) Microsoft Windows 7 (32/64-bit) Standard compliant IVI-COM, IVI-C, LabVIEW drivers Supported applica- VisualStudio (VB.NET, C#, C/C++), LabVIEW, tion development LabWindows/CVI, MATLAB environments (ADE) Keysight IO Libraries Includes: VISA Libraries, Keysight Connection Expert, IO Monitor Recommended chassis configuration For the ultimate in speed and flexibility, combine your switches with other PXI modules in the Keysight M9018A PXIe chassis as follows: –– Select a PXIe system module, PCIe cable interface, or embedded controller (the Keysight M9021A is recommended) –– If an external computer is being used, select an appropriate PC interface card (the Keysight M9047A is recommended with an external PC) –– Select an appropriate cable to connect the computer interface board to the system module (the Y1202A is recommended to connect the M9047A and M9021A) –– Select rack mount and EMC filler panel kits as required 14 | Keysight | General Purpose Switch Modules - Data Sheet Definitions for specifications Specifications describe the warranted performance of calibrated instruments that have been stored for a minimum of 2 hours within the operating temperature range of 0 to 55 °C, unless otherwise stated, and after a 45 minute warm-up period. Data represented in this document are specifications unless other wise noted. Characteristics describe product performance that is useful in the application of the product, but that is not covered by the product warranty. Characteristics are often referred to as Typical or Nominal values. –– Typical describes characteristic performance, which 80% of the instruments will meet when operated over a 20 to 30 °C temperature range. Typical performance is not warranted. –– Nominal describes representative performance that is useful in the application of the product when operated over a 20 to 30 °C temperature range. Nominal performance is not warranted. Note: All graphs contain measured data from several units at room temperature unless otherwise noted. Warranty and Calibration Advantage Services: Calibration and Warranty Keysight Advantage Services is committed to your success throughout your equipment’s lifetime. Warranty Included 3-year warranty (return to Keysight), standard1 R-51B-001-5Z 5-year return to Keysight warranty assurance plan 1. Excludes relay wear-out. 15 | Keysight | General Purpose Switch Modules - Data Sheet Evolving Our unique combination of hardware, software, support, and people can help you reach your next breakthrough. We are unlocking the future of technology. From Hewlett-Packard to Agilent to Keysight myKeysight www.keysight.com/find/mykeysight A personalized view into the information most relevant to you. www.pxisa.org PCI eXtensions for Instrumentation (PXI) modular instrumentation delivers a rugged, PC-based high-performance measurement and automation system. Three-Year Warranty www.keysight.com/find/ThreeYearWarranty Keysight’s committed to superior product quality and lower total cost of ownership. Keysight is the only test and measurement company with three-year warranty standard on all instruments, worldwide. And, we provide a one-year warranty on many accessories, calibration devices, systems and custom products. Keysight Assurance Plans www.keysight.com/find/AssurancePlans Up to ten years of protection and no budgetary surprises to ensure your instruments are operating to specification, so you can rely on accurate measurements. Keysight Channel Partners www.keysight.com/find/channelpartners Get the best of both worlds: Keysight’s measurement expertise and product breadth, combined with channel partner convenience. PXI is a registered trademark of the PXI Systems Alliance. Visual Studio, Visual C, C++, and Visual Basic are registered trademarks of Microsoft Corporation. Windows and MS Windows are U.S. registered trademarks of Microsoft Corporation. PCIe is a registered trademark of PCI-SIG. For more information on Keysight Technologies’ products, applications or services, please contact your local Keysight office. The complete list is available at: www.keysight.com/find/contactus Americas Canada Brazil Mexico United States (877) 894 4414 55 11 3351 7010 001 800 254 2440 (800) 829 4444 Asia Pacific Australia China Hong Kong India Japan Korea Malaysia Singapore Taiwan Other AP Countries 1 800 629 485 800 810 0189 800 938 693 1 800 11 2626 0120 (421) 345 080 769 0800 1 800 888 848 1 800 375 8100 0800 047 866 (65) 6375 8100 Europe & Middle East Austria Belgium Finland France Germany Ireland Israel Italy Luxembourg Netherlands Russia Spain Sweden Switzerland United Kingdom 0800 001122 0800 58580 0800 523252 0805 980333 0800 6270999 1800 832700 1 809 343051 800 599100 +32 800 58580 0800 0233200 8800 5009286 800 000154 0200 882255 0800 805353 Opt. 1 (DE) Opt. 2 (FR) Opt. 3 (IT) 0800 0260637 For other unlisted countries: www.keysight.com/find/contactus (BP-11-29-16) DEKRA Certified ISO9001 Quality Management System www.keysight.com/find/modular www.keysight.com/find/pxi-switch www.keysight.com/go/quality Keysight Technologies, Inc. DEKRA Certified ISO 9001:2015 Quality Management System This information is subject to change without notice. © Keysight Technologies, 2013 - 2017 Published in USA, January 31, 2017 5990-7183EN www.keysight.com