200W H i g h P o w e r D ens i t y M edi c al Grade Op e n Fra me Po we r Su p p lie s ASM200 BSM200 series Medical Safety Approval – 60601-1 3rd Edition – 2 MOPP Class I and Class II medical applications 200 Watts in miniature 3”x 5”x 1.4” footprint High Efficiency, up to 94% @ 230Vac Universal 90-264 Vac Input, 50/60 Hz Convection Cooled 100% Full Load Burn-in 3 Year Warranty ORDERING INFORMATION Class I Model Class II Model Output Voltage Output Current Efficiency typ. 230/115VAC ASM200S-12-(XX)* BSM200S-12-(XX)* 12 VDC 16.7 Amps 94/92% ASM200S-15-(XX)* BSM200S-15-(XX)* 15 VDC 13.4 Amps 94/92% ASM200S-19-(XX)* BSM200S-19-(XX)* 19.6 VDC 10.2 Amps 94/92% ASM200S-24-(XX)* BSM200S-24-(XX)* 24 VDC 8.4 Amps 94/92% ASM200S-28-(XX)* BSM200S-28-(XX)* 28 VDC 7.15 Amps 94/92% ASM200S-36-(XX)* BSM200S-36-(XX)* 36 VDC 5.6 Amps ASM200S-48-(XX)* BSM200S-48-(XX)* 48 VDC 4.2 Amps ASM200S-54-(XX)* BSM200S-54-(XX)* 54 VDC 3.7 Amps *Denotes Auxiliary output options. See 94/92% OPTIONAL OUTPUTS section on Page 2 and 94/92% PART NUMBERING INFORMATION Chart on 94/92% Page 4 PRODUCT DESCRIPTION The Astrodyne ASM200 and BSM200 Series are high density, medium power miniature open frame power supplies designed for medical applications. These products are rated for natural convection cooling. The ASM200 (Class 1 input) and BSM200 (Class 2 input) have 2 MOPP (means of patient protection) input to output isolation and BF leakage current compliance at the DC output, and have been certified by Underwriters Laboratories for compliance with the latest edition of the international medical safety standard, IEC 60601-1 3rd Edition, using the CB reporting scheme. They are also certified to be compliant with the collateral standard 60601-1-2 for EMC and bear the UL Recognized component marks for North America and the EU, as well as the CE mark. ©2015 AstrodyneTDI Corporation ASM/BSM200S rev. B 07-1-15 Page 1 www.astrodynetdi.com 200W H i g h P o w e r D ens i t y M edi c al Grade Op e n Fra me Po we r Su p p lie s INPUT SPECIFICATIONS ASM200 BSM200 series ISOLATION SPECIFICATIONS Input Voltage Range 90-264 VAC Input to Output 4000VAC, 2 MOPP Range of Nominal Input Voltages 100-240 VAC Input to Earth 1500VAC, 1 MOPP Input Frequency 47-63 Hz (50/60 Hz Nom.) Output to Earth 500VAC Input Current 2.2A Max at 115VAC 1.1A Max at 230VAC Inrush Current 30A Max at 115VAC, 60 Hz 60A Max at 230VAC, 50 Hz OVERALL SPECIFICATIONS Patient Leakage Current 100uA Max at 264VAC, 60Hz BF rating Input Fusing 8A fuse in both L and N Lines MAIN OUTPUT SPECIFICATIONS Voltage and Current Output Power Efficiency 92%/94% typ. 120/230VAC No Load Power 2W max, 90-264V Start-up Delay 2S maximum Start-up Rise Time 50ms maximum Hold-up Time 32ms typ. Full Load Power Density 9.5 W/in³ Switching Frequency See Ordering Information Pg 1 MTBF to MIL-STD-217GB 40°C 200W Continuous See temp. derating curve Minimum Load No minimum load required Load Regulation ± 1% Max, 0 to Full Load Line Regulation ± 0.1% Max, 90 to 264 VAC Temp. Drift 0.025 %/°C Transient Response Excursion 200 KHz typ. 220K Hrs OUTPUT PROTECTIONS Over Current Inception 115% Typ Rated Current Short Circuit Less than ± 5% 50 to 100% Load Step 1A/us Slew Rate Hiccup Mode, Automatic recovery Over Over Voltage Protection Transient Response Recovery Time 2ms Max 50 to 100% Load Step 1A/us Slew Rate 130% Vo max. Latching, Recycle Input to Reset Over Temperature Protection Automatic recovery Ripple and Noise 1% pk-pk Max. 20MHz BW Measured with 47uF Alum and Size 0.1uF Ceramic at output Weight OPTIONAL OUTPUTS (See Part Numbering Chart Pg 4) 5V Aux. Output 1Amp 12V Fan Output 0.5 Amp ©2015 AstrodyneTDI Corporation ASM/BSM200S rev. B 07-1-15 MECHANICAL SPECIFICATIONS 3.0” x 5.0” x 1.40” 0.88lbs. (400g) Input Connector TE 641937-1 Input Mating Connector Housing TE 770476-2 Terminal TE 770476-2 (18-24 AWG) Output Connector TE 640445-6 Output Mating Connector Housing TE 770476-2 Terminal TE 770476-2 (18-24 AWG) Page 2 www.astrodynetdi.com 200W H i g h P o w e r D ens i t y M edi c al Grade Op e n Fra me Po we r Su p p lie s 200W High Power Density Medical Grade Open Frame EMC Power Supply ENVIRONMENTAL SPECIFICATIONS CERTIFICATIONS -40 to +85°C Storage Temperature Range 0 to 10,000 Altitude ft. Humidity 0 to 95%, 0 to 3048 m non-condensing Vibration Shock Vibration 0 toHalf 10,000 ft., 06toaxis 3048 m 30G pk. sine, 2 G RMS, 5 Hz 5006 Hz 30G pk. Halftosine, axis 3 axis,2 G 30RMS, min5 Hz to 500 Hz EN60601-1-2 Class EN55011/A2 Class B B ESD Susceptibility Radiated Emissions Air Discharge EN61000-4-2 Criteria EN60601-1-2 Class B A Level 3 EN55011/A2 Class B EN61000-4-2 Criteria EN61000-4-2 Criteria AA Level 2 Level 3 EN61000-4-3 Criteria EN61000-4-2 Criteria AA Level Level 2 2 EN61000-4-3 Criteria AA EN61000-4-4 Criteria Level Level 2 3 EN61000-4-4 Criteria AA EN61000-4-5 Criteria Level Level 3 2 EN61000-4-5 Criteria A EN61000-4-6 Criteria A Level 2 Level 2 EN61000-4-6 Criteria A Level 2 Radiated ESD Susceptibility Contact Discharge Susceptibility Edition IEC 60601-1 3rdES60601-1 Edition 3rd ANSI/AAMI CB Reporting Scheme Edition UL EU Radiated Emissions ESD ESD Susceptibility Susceptibility Contact Discharge Air Discharge 3 axis, 30 min SAFETY CERTIFICATIONS (Pending) SAFETY UL/cUL CERTIFICATIONS ANSI/AAMI ES60601-1 3rd UL EU UL/cUL BSM200S-20 series EMC CERTIFICATIONS (Pending) Conducted Emissions EN60601-1-2 Class B EN55011 Class Conducted Emissions EN60601-1-2 ClassBB Oper. Temperature Range SPECIFICATIONS -20 to +40°C at Full Load ENVIRONMENTAL (cont.) Altitude Shock ASM200 BSM200 Radiated EFT/Burst Susceptibility EFT/Burst Surge IEC 60601-1 3rd Edition CB Reporting Scheme Surge Conducted Susceptibility EMC Certification notes: 1) Emissions compliance at both 115V and 230V 2) For Radiated emissions compliance, 4 mounting All specifications are typical at nominal input, full load, and 25°C unless holes otherwise should be attached to an electrically specifiied conductive surface. Conducted Susceptibility EN55011 Class B EMC Certification Notes: All Specifications are typical at nominal input, full load, 25°C unless specified otherwise. 1) Emissions compliance at both 115V and 230V 2) For full EMC compliance, 4 mounting holes should be attached to an electrically conductive surface. OUTPUT POWER DERATING vs. AMBIENT TEMPERATURE Output Power vs. Ambient Temperature, 90-264 VAC, Natural Convection Derate 4.28W/°C from 40°C to 75°C ©2015 AstrodyneTDI Corporation ASM/BSM200S rev. B 07-1-15 ©2015 Astrodyne Corporation BSM200S-20 rev. B 03-26-15 Page 3 Page 3 www.astrodynetdi.com www.astrodynetdi.com 200W H i g h P o w e r D ens i t y M edi c al Grade Op e n Fra me Po we r Su p p lie s ASM200 BSM200 series PART NUMBERING INFORMATION Input Class/Product Family (A or B) A: ASM Class I Input B: BSM Class II Input SM200S – – DC Output (2 Characters) i.e 12: 12V 19: 19.6V 24: 24V 54: 54V (See Model Chart pg 1) Aux. Output Configuration (0 or 2 characters) Blank: +5V Aux. and +12V Fan outputs both provided A1: +12V Fan output provided, +5V Aux. not provided 00: Neither Auxiliary output provided D12: Direct Down Converted, Single Output, +12V D5: Direct Down Converted, Single Output, +5V Note: 1. PS-ON, PWR-OK and Remote Sense (RS) are not provided on 00 configuration. 2. PS-ON: This signal must connect to DC_OUT_RTN to turn on the main and FAN output; The 5V_AUX output is on when AC is applied. 3. PWR_OK: Open collector logic goes to high 160ms (typ.) after main output is in regulation. ©2015 AstrodyneTDI Corporation ASM/BSM200S rev. B 07-1-15 Page 4 www.astrodynetdi.com ASM200 BSM200 200W H i g h P o w e r D ens i t y M edi c al Grade Op e n Fra me Po we r Su p p lie s 5.00 127 4.55 115.6 .22 5.7 [.134] 4x 3.4 mounting holes All 4 corner holes need to be bondedaccor dingly to the end product PE (Protective Earth) path O/P connector Label location (Reference) I/P connector 1 1 2 3 4 5 6 2 3 3.00 76.2 series 2.56 65 O/P & Signal connector P.E. 2 4 6 8 4 1 3 5 7 .22 5.6 TERMINAL ASSIGNMENTS CN1 1.32 33.6 max CN2 CN3 .06 1.6 .10 2.5 0.16 CN4 Connector P/N info. for reference. I / P : TE 641937-1 or equivalent Mating Connector : TE 640250-3 Crimp terminal/pins : TE 770476-2 (18-24 AWG) O / P : TE 640445-6 or equivalent Mating Connector : TE 640250-6 Crimp terminal/pins : TE 770476-2 (18-24 AWG) Mating Connector :Molex 90142 series O / P& Signal :Molex 90130 series or equivalent 1 2 3 4 1-3 4-6 1 2 3 4 5 6 7 8 ACL NC ACN P.E. DC_OUT DC_OUT_RTN 5V_AUX PWR_OK 12V_AUX_RTN PS-ON +REMOTE_SENSE -REMOTE_SENSE 12V_AUX 5V_AUX_RTN NOTES : 1. All dimension in mm 〔inch〕. 2. Length 、Width tolerance : 0.2mm〔 0.008〕 3. Height Maximum dimensions : 36.1mm〔1.42〕 Notes: DRAWING NO. REV A A1 ASM200S-L outline drawing DESCRIPTION 1. Drawing is 3rd angle projection NEW SPEC change CN3 and CN4 the Pin name. 2. All dimensions in mm [in.] DATE 2015/03/27 2015/04/14 UNIT SHEET METAL TOLERANCE (UNLESS OTHERWISE SPECIFIED) SIZE PIERCING BENDING ±0.1 ±0.1 ±0.15 ±0.2 ±0.3° ±0.5° ±0.15 ±0.2 ±0.25 ±0.5° 100 X<300 ±0.3 ±1° 300 X<800 ±0.3 ±0.5 ±1.5° DIMENSION X<8 8 X<25 25 X<100 ANGULAR mm A3 SCALE 1:1 SHEET OF MATERIAL PART NO. MODEL NO. Projection DRAWN TITLE A/BSM200S-L outline drawing E.LIU CHECKED APPROVED 3. Length and width tolerance is ± 0.2 [0.008] 4. Maximum height 36.1 [1.42] 5. For full EMC compliance, bond 4 mounting holes to an electrically conductive surface. ©2015 AstrodyneTDI Corporation ASM/BSM200S rev. B 07-1-15 Page 5 www.astrodynetdi.com