ITT MDM-9PCBRM17-TA174 Micro-d pcb - .050 contact spacing Datasheet

Micro-D PCB - .050" Contact Spacing
MDM-PCB
MDM-PCB connectors are designed for use
with flex circuitry, flat cable and printed circuit
boards or multi-layer boards. They use the
standard MDM metal shell and provide high
density and high reliability in board-to-board,
board-to-cable and cable-to-cable applications.
MDM-PCB connectors are available in 8 shell
sizes with 9 to 100 contacts. Terminations
may be straight (BS) or at 90˚ right angle (BR,
CBR) board thickness. Jackpost mounting for
use with locking hardware is also available.
How to Order - MDM-PCB Series
R
MDM *
- 25 P
BS
P - T
L39
A174
RoHS COMPLIANCE
SERIES
INSULATOR MATERIAL
CONTACT ARRANGEMENT
CONTACT TYPE
TERMINATION TYPE
MOUNTING HARDWARE (Shell Flange)
MOUNTING HARDWARE FOR PCB
TERMINATION TAIL LENGTH MODIFICATION CODE
SHELL FINISH MODIFICATION CODES
SERIES
MDM - Micro "D" Metal Shell
INSULATOR MATERIAL
Liquid Crystal Polymer (LCP)
CONTACT ARRANGEMENT
9, 15, 21, 25, 31, 37, 51, and 100
CONTACT TYPE
P - Pin (Plug)
S - Socket (Receptacle)
NOTE: Back molding material –
Epoxy Hysol #MG40FS
TERMINATION TYPE
BS - Straight PCB Termination
BR - Right Angle PCB Termination
CBR - Right Angle Narrow Profile PCB Terminations
MOUNTING HARDWARE (Shell Flange)
P
- Jackposts
M7 - Jackposts
M83513/5-07 (Sizes 9-51)
M17 - Jackposts
M83513/5-17 (Size 100)
No letter - none
MOUNTING HARDWARE FOR PCB
T - Threaded Insert
#2-56 Thd for Shell Sizes 9 thru 51
#4-40 Thd for Shell Size 100
No letter - none
TERMINATION TAIL LENGTH MODIFICATION CODE
None - .109 (2.77) ±.015 (0.38) Standard
L61 - .125 (3.18)
L56 - .150 (3.81)
L57 - .190 (4.83)
L39 - .250 (6.35)
L58 - .375 (9.52)
SHELL FINISH MODIFICATION CODES
None - Yellow Chromate/Cadmium over Nickel
A174 - Electroless Nickel
A172 - Gold over Nickel
A141 - Irridite/Alodine
A30 - Black Anodize
(For special modification codes, consult
customer service.)
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
18
Micro-D PCB - .050" Contact Spacing
MDM-PCB
BS (Board Straight) Series
A
B
D
C
.186 (4.72) MAX. PLUG
.198 (5.03) MAX. RECEPTACLE
F
E
G
J
CAV.
#1
.096 ± .005
(2.44 ± 0.13) DIA.
Size 9-51)
K
H
LAST
CAV.
JACKPOST (9-51)
#2-56 UNC-2B TYP.
.109 ± 0.15
(2.77 ± 0.38)
JACKPOST (100)
#4-40 UNC-2B TYP.
.120 ± .005
(3.05 ± 0.13)
Size 100
LAST CAV.
*
.100 (2.54)
REF.
CAV. #1
PCB Termination Arrangements* (Viewed from PCB solder side)
Identification number shown for plug connector, use reverse order for socket connector.
.050
(1.27)
6
1
7
2
8
3
.050
(1.27)
9
4
5
1
2
3
4
5
6
7
.050
(1.27)
.050
(1.27)
9 10 11 12 13 14 15
.375
(9.53)
NOTE: Dimensions shown are for reference only-consult factory for final design dimensions.
12 13
8
1
2
14 15 16 17 18 19 20 21
3
5
6
7
8
9 10 11
15 Contacts
2
3
4
5
6
7
8
9 10
20 21 22 23 24 25 26 27 28 29 30 31
11 12 13 14 15 16
1
.150
(3.81)
2
3
4
5
6
7
8
9 10
.050
(1.27)
32 33 34 35 36 37
.100
(2.54)
TYP.
77
27
1
78
53
28
2
79
54
29
3
5
6
7
8
9 10 11
36
12 13
37 38 39 40 41 42 43 44 45 46 47 48
19
11 12 13 14 15 16 17 18 19
1
37 Contacts
52
4
49 50 51
35
2
3
4
5
6
7
8
9 10
11 12 13 14 15 16 17 18
.150
(3.81)
31 Contacts
76
3
25 Contacts
.050
(1.27)
1
2
21 Contacts
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
.150
(3.81)
1
.150
(3.81)
.225
(5.72)
.225
(5.72)
TYP.
9 Contacts
4
14 15 16 17 18 19 20 21 22 23 24 25
80
30
4
81
55
56
31
5
82
57
32
6
83
58
33
7
84
59
34
8
85
60
35
9
86
61
36
10
87
62
37
11
12
88
63
38
89
64
39
13
90
65
40
14
51 Contacts
91
66
41
15
92
67
42
16
93
43
17
94
68
69
44
18
19
95
70
45
96
71
46
20
21
97
72
47
98
73
48
22
.150
(3.81)
99
49
23
100
74
75
50
24
25
51
26
.150
(3.81)
100 Contacts
NOTE: Standard lead termination is #24 AWG, solid copper, solder or tin dipped
All Termination Configurations .100 (2.54) x .100 (2.54) Grid Pattern, Offset .050 (1.27)
Part Number
By Shell Size
MDM-9PBS*
A
Max.
1.390 (35.31)
B
±.007 (.18)
1.150 (29.21)
C
±.005 (.13)
.565 (14.35)
D
Max.
.785 (19.94)
E
Max.
.334 (8.48)
F
Max.
.185 (4.70)
G
Max.
.308 (7.82)
H
Max.
.165 (4.19)
J
Max.
.355 (9.02)
K
Max.
.555 (14.10)
MDM-9SBS*
1.390 (35.31)
1.150 (29.21)
.565 (14.35)
.785 (19.94)
.402 (10.21)
.253 (6.43)
.308 (7.82)
.165 (4.19)
.355 (9.02)
.555 (14.10)
MDM-15PBS*
1.390 (35.31)
1.150 (29.21)
.715 (18.16)
.935 (23.75)
.484 (12.29)
.185 (4.70)
.308 (7.82)
.165 (4.19)
.355 (9.02)
.555 (14.10)
MDM-15SBS*
1.390 (35.31)
1.150 (29.21)
.715 (18.16)
.935 (23.75)
.552 (13.97)
.253 (6.43)
.308 (7.82)
.165 (4.19)
.355 (9.02)
.555 (14.10)
MDM-21PBS*
1.690 (43.93)
1.450 (36.83)
.865 (21.97)
1.085 (27.56)
.634 (16.10)
.185 (4.70)
.308 (7.82)
.165 (4.19)
.355 (9.02)
.555 (14.10)
MDM-21SBS*
1.690 (43.93)
1.450 (36.83)
.865 (21.97)
1.085 (27.56)
.702 (17.83)
.253 (6.43)
.308 (7.82)
.165 (4.19)
.355 (9.02)
.555 (14.10)
MDM-25PBS
1.740 (44.20)
1.500 (38.10)
.965 (24.51)
1.185 (30.10)
.734 (18.64)
.185 (4.70)
.308 (7.82)
.165 (4.19)
.355 (9.02)
.555 (14.10)
MDM-25SBS*
1.740 (44.20)
1.500 (38.10)
.965 (24.51)
1.185 (30.10)
.802 (20.37)
.253 (6.43)
.308 (7.82)
.165 (4.19)
.355 (9.02)
.555 (14.10)
MDM-31PBS*
2.040 (51.82)
1.800 (45.72)
1.115 (28.32)
1.335 (33.91)
.884 (22.45)
.185 (4.70)
.308 (7.82)
.165 (4.19)
.355 (9.02)
.555 (14.10)
MDM-31SBS*
2.040 (51.82)
1.800 (45.72)
1.115 (28.32)
1.335 (33.91)
.952 (24.18)
.253 (6.43)
.308 (7.82)
.165 (4.19)
.355 (9.02)
.555 (14.10)
MDM-37PBS*
2.340 (59.44)
2.100 (53.34)
1.265 (32.13)
1.485 (37.72)
1.034 (26.26)
.185 (4.70)
.308 (7.82)
.165 (4.19)
.355 (9.02)
.555 (14.10)
MDM-37SBS*
2.340 (59.44)
2.100 (53.34)
1.265 (32.13)
1.485 (37.72)
1.102 (27.99)
.253 (6.43)
.308 (7.82)
.165 (4.19)
.355 (9.02)
.555 (14.10)
MDM-51PBS*
2.270 (67.66)
2.000 (50.80)
1.215 (30.86)
1.435 (36.45)
.984 (24.99)
.228 (5.79)
.351 (8.92)
.165 (4.19)
.355 (9.02)
.555 (14.10)
MDM-51SBS*
2.270 (67.66)
2.000 (50.80)
1.215 (30.86)
1.435 (36.45)
1.052 (26.72)
.296 (7.52)
.351 (8.92)
.165 (4.19)
.355 (9.02)
.555 (14.10)
MDM-100PBS*
3.070 (77.98)
2.800 (71.12)
1.800 (45.72)
2.175 (55.24)
1.384 (35.15)
.271 (6.88)
.460 (11.68)
.303 (7.70) .550 (12.70)
.686 (17.42)
3.070 (77.98)
2.800 (71.12)
1.800 (45.72)
MDM-100SBS*
*For jackpost, add letter "P" or "M7" for sizes 9-51, "M17" for size 100.
2.175 (55.24)
1.508 (38.30)
.394 (10.01)
.460 (11.68)
.303 (7.70) .550 (12.70)
.686 (17.75)
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
19
Micro-D PCB - .050" Contact Spacing
MDM-PCB
BR (Board Right Angle) Series
C
.109 ± .015
(2.77 ± 0.38)
E
CAV.
#1
JACKPOST
#2-56 UNC-2B TYP.
.186 (4.72)
MAX. PLUG
.198 (5.05)
MAX.
A
G
B
.125 ± .015
(3.18 ± 0.38)
D
.100
(2.54)
TYP.
F
LAST
CAV.
.050
(1.27)
TYP.
.096 ± .005
(2.44 ± 0.31)
.150 ± .010
(3.8 ± 0.25)
.100 TYP.
PCB Termination Arrangements (Viewed from bottom of connector, PCB solder side.)
Identification number shown for plug connector, use reverse order for socket connector.
.150
(3.81)
6
1
7
2
8
3
.375
(9.53)
9
4
9 10 11 12 13 14 15
5
1
2
3
4
5
6
7
12 13
.300
(7.62)
8
.150
(3.81)
.150
(3.81)
.150
(3.81)
1
2
14 15 16 17 18 19 20 21 22 23 24 25
14 15 16 17 18 19 20 21
3
4
5
6
7
8
1
9 10 11
15 Contacts
9 Contacts
4
5
5
6
7
8
9 10 11
12 13
.175
(4.45)
25 Contacts
.050
(1.27)
20 21 22 23 24 25 26 27 28 29 30 31
36
32 33 34 35 36 37
19
3
4
.150
(3.81)
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
2
3
21 Contacts
.150
(3.81)
1
2
.225
(5.72)
6
7
8
9 10
11 12 13 14 15 16
1
2
3
4
5
6
7
8
9 10
1
11 12 13 14 15 16 17 18 19
3
4
5
6
7
8
9 10
49 50 51
34 35
11 12 13 14 15 16 17 18
.150
(3.81)
.150
(3.81)
.150
(3.81)
51 Contacts
37 Contacts
31 Contacts
37 38 39 40 41 42 43 44 45 46 47 48
20 21 22 23 24 25 26 27 28 29 30 31 32 33
2
.050
(1.27)
76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100
52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75
27 28 29 30 31 32 33
1
2
3
4
5
6
7
34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51
8
9 10
11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
.150
(3.81)
100 Contacts
NOTE: Standard lead termination is #24 AWG, gold plated, solid copper, solder or tin dripped.
Part Number
By Shell Size
MDM-9PBR*
MDM-9SBR*
MDM-15PBR*
MDM-15SBR*
MDM-21PBR*
MDM-21SBR*
MDM-25PBR*
MDM-25SBR*
MDM-31PBR*
MDM-31SBR*
MDM-37PBR*
MDM-37SBR*
MDM-51PBR*
MDM-51SBR*
MDM-100PBR*
MDM-100SBR*
A
Max.
1.390 (35.31)
1.390 (35.31)
1.540 (39.12)
1.540 (39.12)
1.690 (42.93)
1.690 (42.93)
1.790 (45.47)
1.790 (45.47)
2.040 (51.82)
2.040 (51.52)
2.340 (59.44)
2.340 (59.44)
1.875 (47.63)
1.875 (47.63)
2.74 (69.72)
2.74 (69.72)
B
± .007 (.18)
1.150 (29.21)
1.150 (29.21)
1.300 (33.02)
1.300 (33.02)
1.450 (36.83)
1.450 (36.83)
1.550 (39.37)
1.550 (39.37)
1.800 (45.72)
1.800 (45.72)
2.100 (53.34)
2.100 (53.34)
1.600 (40.64)
1.600 (40.64)
2.500 (63.50)
2.500 (63.50)
All Termination Configurations .100 (2.54) x .100 (2.54) Grid Pattern, Offset .050 (1.27).
C
± .005 (.13)
.565 (14.35)
.565 (14.35)
.715 (18.16)
.715 (18.16)
.865 (21.97)
.865 (21.97)
.965 (24.51)
.965 (24.51)
1.115 (28.32)
1.115 (28.32)
1.265 (32.13)
1.265 (32.13)
1.215 (30.86)
1.215 (30.86)
1.800 (45.72)
1.800 (45.72)
D
Max.
.334 (8.48)
.402 (10.21)
.484 (12.29)
.552 (13.97)
.634 (16.10)
.702 (17.83)
.734 (18.64)
.802 (20.37)
.884 (22.45)
.952 (24.18)
1.034 (26.26)
1.102 (27.99)
.984 (24.99)
1.052 (26.72)
1.384 (35.15)
1.508 (38.10)
E
Max.
F
Max.
.185 (4.70)
.253 (6.43)
.185 (4.70)
.253 (6.43)
.185 (4.70)
.253 (6.43)
.185 (4.70)
.253 (6.43)
.185 (4.70)
.253 (6.43)
.185 (4.70)
.253 (6.43)
.228 (5.79)
.296 (7.52)
.271 (6.88)
.394 (10.01)
.455 (11.56)
.455 (11.56)
.455 (11.56)
.455 (11.56)
.455 (11.56)
.455 (11.56)
.455 (11.56)
.455 (11.56)
.455 (11.56)
.455 (11.56)
.455 (11.56)
.455 (11.56)
.565 (14.35)
.565 (14.35)
.755 (19.18)
.755 (19.18)
G
Max.
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.351 (8.92)
.351 (8.92)
.394 (10.01)
.394 (10.01)
*For jackpost, add letter "P" or "M7" for sizes 9-51, "M17" for size 100.
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
20
Micro-D PCB - .050" Contact Spacing
MDM-PCB
CBR (Condensed Board Right Angle) Series
LAST
CAV.
JACKPOST 2-56
UNC-2B TYP.
(Size 9-51)
A
C
.109 ± .015
(2.77 ± 0.38)
+
D
+
.186 (4.72)
MAX.PLUG
.198 (5.03)
MAX. RECEPT.
CAV.
#1
B
.185
(4.70)MAX.
H
G
F
E
JACKPOST
#4-40 UNC 2B TYP.
C
H
H
G
G
F
.096 ± .005
(2.44 ± 0.31)
DIA.TYP.
(Size 9-51)
SEE
VIEW X
SEE
VIEW Y
F
.125 ± .005
(3.18 ± 0.31)
DIA. TYP.
**
* * FOR 31: 1.085(27.56) MAX.
FOR 37: 1.185(30.10) MAX.
FOR 51: 1.225(31.12) MAX.
1.815 (46.10) MAX.
SEE
VIEW W
100 VIEW
PCB Termination Arrangements (Viewed from bottom of connector, PCB solder side.)
Identification number shown for plug connector, use reverse order for socket connector.
.108
(2.73)
.083
(2.11)
5
4
9
2
8
.100 (2.54)
TYP.
7
3
.020
(0.51)
1
7
8
15
5
6
14
4
12
13
3
11
1
10
10
15 Contacts
View X
21
20
.083 (2.11)
6
8
9
11
9
6
9 Contacts
View X
.083
(2.11)
.020
(0.51)
2
7
19
5
.050 (1.27)
TYP.
4
17
18
3
16
1
14
15
.020
(0.51)
13
10
11
12
2
13
24
25
12
8
5
7
21 20
23
19
.158 (4.00)
15
16
13
14
30
.020
(0.51)
29
31
11
12
28
27
9
10
8
24
25
26
6
7
23
4
5
21
22
2
3
19
20
19
1
18
17
37
18
.020
(0.51)
36
17
15
16
35
13
14
33
34
32
12
31
30
11
10
29
7
9
5
8
28
6
26
27
25
3
4
.020
(0.51)
25 Contacts
View X
21 Contacts
View X
24
22
23
15
17
1
18
2
35
20
16
34
21
51 50
13
14
33
32
48
28
43
45
47
8
6
7
9
10
29 46
30
49
27
11
12
31
26
42
44
40
4
5
25
41
39
2
3
24
25
1
23
22
38
36
50
All Termination Configurations .100 (2.54) x .100 (2.54) Grid Pattern, Offset .050 (1.27).
Part Number
By Shell Size
MDM-9PCBR*
MDM-9SCBR*
MDM-15PCBR*
MDM-15SCBR*
MDM-21PCBR*
MDM-21SCBR*
MDM-25PCBR*
MDM-25SCBR*
MDM-31PCBR*
MDM-31SCBR*
MDM-37PCBR*
MDM-37SCBR*
MDM-51PCBR*
MDM-51SCBR*
MDM-100PCBR*
MDM-100SCBR*
A
Max.
.785 (19.94)
.785 (19.94)
.935 (23.75)
.935 (23.75)
1.085 (27.56)
1.085 (27.56)
1.185 (30.10)
1.185 (30.10)
1.335 (33.91)
1.335 (33.91)
1.485 (37.72)
1.485 (37.72)
1.435 (36.45)
1.435 (36.45)
2.170 (55.12)
2.170 (55.12)
B
± .005 (.13)
.565 (14.35)
.565 (14.35)
.715 (18.16)
.715 (18.16)
.865 (21.97)
.865 (21.97)
.965 (24.51)
.965 (24.51)
1.115 (28.32)
1.115 (28.32)
1.265 (32.13)
1.265 (32.13)
1.215 (30.86)
1.215 (30.86)
1.800 (45.72)
1.800 (45.72)
C
Max.
.334 (8.48)
.402 (10.21)
.484 (12.29)
.552 (13.97)
.634 (16.10)
.702 (17.83)
.734 (18.64)
.802 (20.37)
.884 (22.45)
.952 (24.18)
1.034 (26.26)
1.102 (27.99)
.984 (24.99)
1.052 (26.72)
1.384 (35.15)
1.508 (38.10)
D
Max.
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.351 (8.92)
.351 (8.92)
.394 (10.01)
.394 (10.01)
*For jackpost, add letter "P" or "M7" for sizes 9-51, "M17" for size 100.
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
21
47
48
73
74
100
99
97
70
96
95
15
14
68
94 92
41
42
69 67
93
13
16
43
46 44
71
72
98
17
18
45
.275 (6.98)
40
65
66
90
91
38
89
86
87
59
60
3
83
2
29 27
30
55
56
82
1
4
31
32
57
58
84
85
5
6
33
36 34
61
62
88
8
10
37 35
63
64
7
9
11
12
39
80
81
28
53
54
78
79
52
76
.100 ± .005
(2.54 ± 0.13)
77
100 Contacts
View W
51 Contacts
View Y
37 Contacts
View Y
31 Contacts
View Y
20
49
75
.108
(2.73)
21 19
22
51
.050
(1.27)
20
37
23
24
26
21 19
14
16
18
1
15
17
.325 (8.26)
.183
(4.65)
2
3
4
6
9
22
NOTE: Standard lead termination is #24 AWG, solid copper,
solder or tin dripped.
E
Max.
.185 (4.70)
.253 (6.43)
.185 (4.70)
.253 (6.43)
.185 (4.70)
.253 (6.43)
.184 (4.70)
.253 (6.43)
.185 (4.70)
.253 (6.43)
.185 (4.70)
.253 (6.43)
.228 (5.79)
.296 (7.52)
.271 (6.88)
.394 (10.01)
F
Max.
.420 (10.67)
.420 (10.67)
.420 (10.67)
.420 (10.67)
.420 (10.67)
.420 (10.67)
.420 (10.67)
.420 (10.67)
.520 (13.21)
.520 (13.21)
.520 (13.21)
.520 (13.21)
.650 (16.15)
.650 (16.15)
1.000 (25.40)
1.000 (25.40)
G
± .010 (.25)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.300 (7.62)
.300 (7.62)
.400 (10.16)
.400 (10.16)
H
± .010 (.25)
.230 (5.81)
.230 (5.81)
.130 (3.30)
.130 (3.30)
.130 (3.30)
.130 (3.30)
.130 (3.30)
.130 (3.30)
.130 (3.30)
.130 (3.30)
.130 (3.30)
.130 (3.30)
.150 (3.81)
.150 (3.81)
.200 (5.08)
.200 (5.08)
Similar pages