OmniVision OV9756 Two-wire serial bus control (sccb) Datasheet

OV9756 720p HD product brief
lead free
available in
a lead-free
package
OmniVision's OV9756 with Second-Generation RGB-Ir
Color Array Pattern Brings HD Imaging to Security and
Smart Home Applications
OmniVision's OV9756 is a high sensitivity CameraChip™
sensor built on a second-generation RGB-Ir color array
pattern for security and smart home applications. With a
1/3-inch optical format, the OV9756 delivers full
resolution 720p high definition (HD) images and video at
60 frames per second (fps).
Built on a 3.75-micron OmniPixel3-HS™ pixel, the
OV9756 can operate in extremely high- and low-light
conditions, bringing excellent scene reproduction to a
wide range of security and lifestyle camera applications.
The OV9756 also features low power mode with system
wake-up trigger functionality.
The OV9756's advanced color array pattern supports
dual band color filters instead of traditional mechanical
rotary IR filters, capturing infrared images and video
with minimal color aliasing.
Find out more at www.ovt.com.
OV9756
Applications
¬ Security and Surveillance Cameras
¬ Wearables
¬ PC Multimedia
¬ 960H for Analog CCTV Applications
Ordering Information
Product Features
¬ OV09756-H55A
(RGB-Ir, lead-free, 55-pin CSP)
¬ 3.75 µm x 3.75 µm pixel
¬ 58 bytes of embedded one-time
programmable (OTP) memory
for customer use
¬ 1280x960 at 60 fps @ 10-bit,
45 fps @ 12-bit
Product Specifications
¬ ultra low power mode (ULPM)
¬ programmable controls for:
- frame rate
- mirror and flip
- cropping
- windowing
¬ support for output formats:
- 10/12-bit RGB-IR RAW
¬ two-wire serial bus control (SCCB)
¬ supports images sizes:
- SXGA (1280x960)
¬ MIPI/LVDS serial output interface
(1- or 2-lane)/DVP interface
¬ image quality control:
- automatic black level calibration
¬ active array size: 1280 x 960
¬ lens size: 1/3"
¬ power supply:
- core: 1.7 to 1.9V (1.8V nominal)
- analog: 3.15 to 3.45V (3.3V nominal)
- I/O: 1.7 to 1.9V (1.8V nominal)
¬ input clock frequency: 6 ~ 74.5 MHz
¬ power requirements:
- active: 166 mW
- standby: 51 µW
- XSHUTDN: 13 µW
¬ lens chief ray angle: 9° linear
¬ maximum image transfer rate:
- SXGA (1280x960): 60 fps
¬ sensitivity: 39.6 Ke-/Lux-sec
¬ temperature range:
- operating: -30°C to +85°C junction
temperature
- stable image: 0°C to +60°C junction
temperature
¬ output interface: 2-lane MIPI/LVDS
serial output/DVP parallel output
¬ output formats: 10/12-bit RGB-Ir RAW
¬ max S/N ratio: 43.1 dB
¬ dynamic range: 73.4 dB @ 8x gain
¬ pixel size: 3.75 µm x 3.75 µm
¬ image area: 4860 µm x 3660 µm
¬ package dimensions:
6254 µm x 5194 µm
Functional Block Diagram
OV9756
image
array
12-bit
ADC
AMP
ISP
row select
column
sample/hold
image output
interface
output
image
sensor
processor
FIFO
image sensor core
PCLK
D[11:0]
MCP/N
MDP/N[1:0]
gain control
control register bank
4275 Burton Drive
Santa Clara, CA 95054
USA
Version 1.1, November, 2017
Tel: + 1 408 567 3000
Fax: + 1 408 567 3001
www.ovt.com
SDA
SCL
SCCB slave interface
SID
STROBE
ULPM
HREF
FSIN/VSYNC
TM
XSHUTDN
timing generator and system control logic
PWDNB
PLL
XVCLK
PLLs
OmniVision reserves the right to make changes to their products or to discontinue any product or
service without further notice. OmniVision and the OmniVision logo are registered trademarks of
OmniVision Technologies, Inc. CameraChip and OmniPixel3-HS are trademarks of OmniVision
Technologies, Inc. All other trademarks are the property of their respective owners.
Similar pages