Vishay EGP10A Glass passivated ultrafast rectifier Datasheet

EGP10A thru EGP10G
Vishay General Semiconductor
Glass Passivated Ultrafast Rectifier
FEATURES
• Superectifier structure for high reliability condition
• Cavity-free glass-passivated junction
SUPERECTIFIER®
• Ultrafast reverse recovery time
• Low forward voltage drop
• Low leakage current
• Low switching losses, high efficiency
• High forward surge capability
DO-204AL (DO-41)
• Solder dip 275 °C max. 10 s, per JESD 22-B106
• AEC-Q101 qualified
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
TYPICAL APPLICATIONS
For use in high frequency rectification and freewheeling
application in switching mode converters and inverters for
consumer, computer and telecommunication.
PRIMARY CHARACTERISTICS
IF(AV)
1.0 A
VRRM
50 V to 400 V
IFSM
30 A
trr
50 ns
VF
0.95 V, 1.25 V
TJ max.
150 °C
MECHANICAL DATA
Case: DO-204AL, molded epoxy over glass body
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS compliant, commercial grade
Base P/NHE3 - RoHS compliant, AEC-Q101 qualified
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix
meets JESD 201 class 2 whisker test
Polarity: Color band denotes cathode end
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
EGP10A
EGP10B
EGP10C
EGP10D
EGP10F
EGP10G
UNIT
Maximum repetitive peak reverse voltage
VRRM
50
100
150
200
300
400
V
Maximum RMS voltage
VRMS
35
70
105
140
210
280
V
Maximum DC blocking voltage
VDC
50
100
150
200
300
400
V
Maximum average forward rectified current
0.375" (9.5 mm) lead length at TA = 55 °C
IF(AV)
1.0
A
Peak forward surge current 8.3 ms single half
sine-wave superimposed on rated load
IFSM
30
A
TJ, TSTG
- 65 to + 150
°C
Operating junction and storage temperature range
Document Number: 88582
Revision: 15-Mar-11
For technical questions within your region, please contact one of the following:
www.vishay.com
[email protected], [email protected], [email protected]
1
This datasheet is subject to change without notice.
THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
EGP10A thru EGP10G
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
Maximum instantaneous
forward voltage
1.0 A
SYMBOL
EGP10A
EGP10B
VF
EGP10C
EGP10F
0.95
EGP10G
1.25
TA = 25 °C
Maximum DC reverse
current at rated DC
blocking voltage
EGP10D
UNIT
V
5.0
IR
TA = 125 °C
Maximum reverse
recovery time
IF = 0.5 A, IR = 1.0 A,
Irr = 0.25 A
trr
Typical junction
capacitance
4.0 V, 1 MHz
CJ
μA
100
50
ns
22
15
pF
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Typical thermal resistance
RJA
EGP10A
EGP10B
EGP10C
(1)
EGP10D
EGP10F
EGP10G
50
UNIT
°C/W
Note
(1) Thermal resistance from junction to ambient, and from junction to lead at 0.375" (9.5 mm) lead length, PCB mounted
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
EGP10D-E3/54
0.337
54
5500
13" diameter paper tape and reel
EGP10D-E3/73
0.337
73
3000
Ammo pack packaging
EGP10DHE3/54 (1)
0.337
54
5500
13" diameter paper tape and reel
EGP10DHE3/73 (1)
0.337
73
3000
Ammo pack packaging
Note
AEC-Q101 qualified
(1)
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
30
Peak Forward Surge Current (A)
Average Forward Rectified Current (A)
1.0
0.5
Resistive or Inductive Load
0.375" (9.5 mm) Lead Length
TJ = TJ Max.
8.3 ms Single Half Sine-Wave
25
20
15
10
5
0
0
0
25
50
75
100
125
150
175
1
10
100
Lead Temperature (°C)
Number of Cycles at 60 Hz
Fig. 1 - Maximum Forward Current Derating Curve
Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current
www.vishay.com
2
For technical questions within your region, please contact one of the following:
Document Number: 88582
[email protected], [email protected], [email protected]
Revision: 15-Mar-11
This datasheet is subject to change without notice.
THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
EGP10A thru EGP10G
Vishay General Semiconductor
70
Pulse Width = 300 μs
1 % Duty Cycle
TJ = 150 °C
10
1
TJ = 25 °C
0.1
40
30
20
EGP10A thru EGP10D
EGP10F and EGP10G
0
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
0.1
1
10
100
Instantaneous Forward Voltage (V)
Reverse Voltage (V)
Fig. 3 - Typical Instantaneous Forward Characteristics
Fig. 5 - Typical Junction Capacitance
1000
100
Transient Thermal Impedance (°C/W)
Instantaneous Reverse Leakage
Current (μA)
50
10
EGP10A thru EGP10D
EGP10F and EGP10G
0.01
0.2
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
60
Junction Capacitance (pF)
Instantaneous Forward Current (A)
100
100
TJ = 150 °C
10
TJ = 100 °C
1
0.1
TJ = 25 °C
20
40
60
80
1
0.1
0.01
0.01
0
10
100
0.1
1
10
100
Percent of Rated Peak Reverse Voltage (%)
t - Pulse Duration (s)
Fig. 4 - Typical Reverse Leakage Characteristics
Fig. 6 - Typical Transient Thermal Impedance
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-204AL (DO-41)
1.0 (25.4)
MIN.
0.107 (2.7)
0.080 (2.0)
DIA.
0.205 (5.2)
0.160 (4.1)
1.0 (25.4)
MIN.
0.034 (0.86)
0.028 (0.71)
DIA.
Note
0.026 (0.66)
• Lead diameter is
for suffix “E” part numbers
0.023 (0.58)
Document Number: 88582
Revision: 15-Mar-11
For technical questions within your region, please contact one of the following:
www.vishay.com
[email protected], [email protected], [email protected]
3
This datasheet is subject to change without notice.
THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1
Similar pages