maxiFLOWTM Heat Sink for Eighth Brick DC-DC Converter ATS PART #ATS-1186-C1-R0 Features & Benefits »» High performance maxiFLOWTM design features less pressure drop and more surface area that maximizes the effective convection (air) cooling »» Hole pattern fits standard eighth power brick modules *Image is for illustration purposes only. »» Pre-assembled with Chomerics T766 phase change Assembly Part Number 4 Screws per Set material »» Heat sink assembly packaged with 3 sets of screws (M3 Philips Pan Head) at 5, 6 and 8 mm lengths Thermal Performance Length (mm) ATS-1186-C2-R0 5 ATS-1186-C3-R0 6 ATS-1186-C4-R0 8 AIR VELOCITY THERMAL RESISTANCE FT/MIN M/S °C/W (UNDUCTED FLOW) °C/W (DUCTED FLOW) 200 1.0 3.0 2.58 300 1.5 2.5 400 2.0 2.2 500 2.5 2.0 600 3.0 1.9 700 3.5 1.7 800 4.0 1.7 Product Details DIMENSION A DIMENSION B DIMENSION C DIMENSION D DIMENSION E DIMENSION F DIMENSION G DIMENSION H DIMENSION I 23.0 mm 59.0 mm 22.9 mm 44.0 mm 50.8 mm 15.2 mm 50.4 mm 12.8 mm 51.3 mm INTERFACE MATERIAL FINISH CHOMERICS GOLD T766 ANODIZED NOTES: 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) Thermal performance data are provided for reference only. Actual performance may vary by application. ATS reserves the right to update or change its products without notice to improve the design or performance. Standard lead time is 4-6 weeks ARO. Contact ATS to learn about custom options available. Dimension C = heat sink height from bottom of the base to the top of the fin field. Dimension D = Fin Tip to Fin Tip Dimension E = Hole Width Dimension F = Hole Length Dimension G = Short Hole Width Dimension H = Short Hole Length Dimension I = Center Hole For further technical information, please contact Advanced Thermal Solutions, Inc. 89-27 ACCESS ROAD, NORWOOD, MA 02062 USA | T: 781.769. 2800 F: 781.769.9979 | WWW.QATS.COM REV4_0117