Common Mode Noise Filter LCF Series LCF Series Description LCF Series covers the specification of the engineering requirements for both Common Mode Noise Filter (CMF) for high speed differential serial interfaces, such as USB 3.1 , USB 2.0 , MIPI, D-PHY or HDMI. Features • Ceramic multilayer type SMD component • Non-polarized product • Conforming to RoHS directive • High temperature soldering guaranteed: 260°C/10 seconds • Effective for suppressing common mode noise and almost no effect for high speed differential data line • Differential mode cut-off frequency up to 8.78GHz at -3dB • Ultra low profile as low as 0.64X0.57X0.35mm Pinout Two Lines Pin1 Pin3 Item Pin4 Description Rdc Pin 1-3, 2-4 CM Impedance Pin 1-2(Short) to Pin 3-4(Short) Four Lines Pin1 Pin2 Applications Pin2 Source 10mA DC Source Equipment Source Meter LCR Meter (3GHz) Pin3 • Consumer − PDP, LCD TV, DVD Player, PC, Audio player, DSC, Set top box, Laptop, SSD, and Home Automation • Mobile Phone and Tablet − USB 3.1 Gen 1 & 2 (5 & 10Gbps) with Type C − Display Port 1.2 (5.4Gbps) − HDMI 2.0 (6.0Gbps) − MDDI, MIPI, MHL • Portable/Wearable Devices − Game console, POS, VR, Dongle, and IoT module Functional Block Diagram Pin4 Two Lines LCF060502A650TG LCF060502B650TG LCF080602A750TG LCR Meter (3GHz) 500mV LCF080602B750TG LCF080602A900TG Source Meter ~: Data Line 1 2 3 LCF080602G900TG 3 LCF121002A350TG 4 Four Lines LCF121002B350TG 2 3 4 LCF121002A650TG 4 1 2 Pin 1-2(Short) to Pin 8-7(Short) Pin 3-4(Short) to Pin 6-5(Short) Equipment 4 LCF121002B650TG LCF121002A750TG Pin1 Pin2 Pin3 Pin4 Pin5 3 1 Six Lines Source 10mA DC Source 1 CM Impedance LCF080602A250TG Pin5 3 Rdc Description Pin 1-8, 2-7 3-6, 4-5 Pin6 12 Item Pin7 4 2 Pin8 LCF121002S750TG Pin6 LCF121002A900TG 1 8 7 6 2 5 3 4 LCF121002B900TG LCF121002C900TG LCF121002D900TG Pin12 Item Rdc CM Impedance Pin11 Pin10 Pin9 Description Pin98 Source Pin 1-12, 2-11, 10mA DC 3-10, 4-9, 5-8, 6-7 Source Pin 1-2(Short) to Pin 12-11(Short) Pin 3-4(Short) to Pin 10-9(Short) Pin 5-6(Short) to Pin 8-7(Short) 8 1 Pin7 Equipment Source Meter 7 2 6 3 5 ~: Data Line LCF160804A750TG 1 2 3 4 5 LCF201202A121TG 4 5 6 8 LCF201204A300TG 7 6 5 Six Lines (LCF300806A750TG) LCF201204A101TG LCF201204B101TG 1 2 3 4 5 6 11 10 9 8 7 LCF201204C101TG 500mV LCR Meter (3GHz) LCF201204A181TG 12 12 11 11 10 10 9 9 8 7 8 ~ 12 : Data Line © 2017 Littelfuse Revised: 06/23/17 Specifications are subject to change without notice. LCF201202A900TG 6 7 12 littelfuse.com Common Mode Noise Filter LCF Series Electrical Characteristics Size (mm) Size (mm) Common Mode Impedance (Ω) Rated Current(mA) Max. Cut-off Freq/Hz DC Resistance (Ω), Max. Number of Lines Leakage Current (μA), Max. Insulation Resistance (MΩ), Min. LCF060502A650TG 0605 0202 65(±25%) 50 4.71 Max 10.0 2 1.0 10 LCF060502B650TG 0605 0202 65(±25%) 130 4.71 Max 10.0 2 1.0 10 LCF080602A250TG 0806 0302 25(±25%) 100 8.22 Max 5.0 2 1.0 10 LCF080602A750TG 0806 0302 75(±25%) 100 4.00 Max 5.0 2 1.0 10 LCF080602B750TG 0806 0302 75(±25%) 110 4.00 Max 5.0 2 1.0 10 LCF080602A900TG 0806 0302 90(±25%) 100 4.10 Max 6.0 2 1.0 10 LCF080602G900TG 0806 0302 90(±25%) 100 3.29 Max 14.0 2 1.0 10 LCF160804A750TG 1608 0603 75(±25%) 100 4.86 Max 6.0 4 1.0 10 LCF121002A350TG 1210 0504 35(±25%) 100 8.78 Max 4.0 2 1.0 10 LCF121002B350TG 1210 0504 35(±25%) 200 8.78 Max 4.0 2 1.0 10 LCF121002A650TG 1210 0504 65(±25%) 100 5.35 Max 4.0 2 1.0 10 LCF121002B650TG 1210 0504 65(±25%) 250 5.35 Max 4.0 2 1.0 10 LCF121002A750TG 1210 0504 75(±25%) 100 3.59 Max 4.0 2 1.0 10 LCF121002S750TG 1210 0504 75(±25%) 100 4.06 Max 4.0 2 1.0 10 LCF121002A900TG 1210 0504 90(±25%) 100 4.65 Max 4.0 2 1.0 10 LCF121002B900TG 1210 0504 90(±25%) 130 4.65 Max 4.0 2 1.0 10 LCF121002C900TG 1210 0504 90(±25%) 150 4.65 Max 4.0 2 1.0 10 LCF121002D900TG 1210 0504 90(±25%) 160 4.65 Max 4.0 2 1.0 10 LCF201202A900TG 2012 0805 90(±25%) 100 3.89 Max 4.0 2 1.0 10 LCF201202A121TG 2012 0805 120(±25%) 100 3.95 Max 4.0 2 1.0 10 LCF201204A300TG 2012 0805 30(±25%) 100 7.38 Max 4.0 4 1.0 10 LCF201204A101TG 2012 0805 100(±25%) 100 2.92 Max 4.0 4 1.0 10 LCF201204B101TG 2012 0805 100(±25%) 120 2.92 Max 4.0 4 1.0 10 LCF201204C101TG 2012 0805 100(±25%) 130 2.92 Max 4.0 4 1.0 10 LCF201204A181TG 2012 0805 180(±25%) 100 4.23 Max 4.0 4 1.0 10 LCF300806A750TG 3008 1203 75(±25%) 100 4.35 Max 6.0 6 1.0 10 Part Number Test Conditions: • Common Mode Impedance(Ω): @100MHz • DC Resistance (Ω): 25ºC±2ºC • Leakage Current (μA): 5V • Insulation Resistance (Max. MΩ): 5V • Rated Current(mA): 25ºC±2ºC © 2017 Littelfuse Revised: 06/23/17 Specifications are subject to change without notice. littelfuse.com Common Mode Noise Filter LCF Series 0605mm size Impedance Curves (Common Mode) 10k Impedance Curves (Differencial Mode) 10k LCF06052A650TG LCF06052B650TG 1k Impedance (Ω) Impedance (Ω) 1k 100 100 10 10 1 1M 10M 100M Frequency (Hz) 1G 1 1M 10G Transmission Characteristics (S-parameter) Common Mode S21 -6 Insertion Loss(dB) Insertion Loss(dB) 1G 10G 1G 10G -3 LCF06052A650TG LCF06052B650TG -12 -15 -18 -21 -9 -15 -18 -21 -24 -27 -27 -30 -30 10M 100M Frequency(Hz) © 2017 Littelfuse Revised: 06/23/17 Specifications are subject to change without notice. 1G 10G LCF06052A650TG LCF06052B650TG -12 -24 -33 1M 100M Frequency (Hz) 0 -3 -9 10M Differencial Mode S21 0 -6 LCF06052A650TG LCF06052B650TG -33 1M 10M 100M Frequency(Hz) littelfuse.com Common Mode Noise Filter LCF Series 0806mm size Impedance Curves (Common Mode) Impedance (Ω) 10k 100k LCF080602A900TG LCF080602G900TG LCF080602A250TG 10k Impedance (Ω) 100k Impedance Curves (Differencial Mode) 1k 100 10 1 1M 10M 100M Frequency (Hz) 1G 100M Frequency (Hz) 1G 10G 0 -6 LCF080602A900TG LCF080602G900TG LCF080602A250TG -12 -18 -24 -30 -24 -30 -36 -42 -42 10M 100M Frequency(Hz) © 2017 Littelfuse Revised: 06/23/17 Specifications are subject to change without notice. 1G 10G LCF080602A900TG LCF080602G900TG LCF080602A250TG -18 -36 -48 1M 10M Differencial Mode S21 Insertion Loss(dB) Insertion Loss(dB) 100 1 1M 10G 0 -12 1k 10 Transmission Characteristics (S-parameter) Common Mode S21 -6 LCF080602A900TG LCF080602G900TG LCF080602A250TG -48 1M 10M 100M Frequency(Hz) 1G 10G littelfuse.com Common Mode Noise Filter LCF Series 1210mm size Impedance Curves (Common Mode) Impedance Curves (Differencial Mode) 10k 10k 1k Impedance (Ω) Impedance (Ω) 1k 100 100 10 10 1 1M 10M 100M Frequency (Hz) 1G 1 1M 10G Transmission Characteristics (S-parameter) Common Mode S21 -18 -6 ICMF112P350MFR ICMF112P650MFR ICMF112P900MFR ICMD112P750MFR ICMFS112P750MFR -12 -24 -30 -18 1G 10G 1G 10G -30 -36 -42 -42 10M 100M Frequency(Hz) © 2017 Littelfuse Revised: 06/23/17 Specifications are subject to change without notice. 1G 10G ICMF112P350MFR ICMF112P650MFR ICMF112P900MFR ICMD112P750MFR ICMFS112P750MFR -24 -36 -48 1M 100M Frequency (Hz) 0 Insertion Loss(dB) Insertion Loss(dB) -12 10M Differencial Mode S21 0 -6 ICMF112P350MFR ICMF112P650MFR ICMF112P900MFR ICMD112P750MFR ICMFS112P750MFR -48 1M 10M 100M Frequency(Hz) littelfuse.com Common Mode Noise Filter LCF Series LCF160804A750TG 1608mm size Impedance Curves (Common Mode) 10k Impedance Curves (Differencial Mode) 10k LCF160804A750TG LCF160804A750TG 1k Impedance (Ω) Impedance (Ω) 1k 100 10 10 1 1M 10M LCF160804A750TG 100M Frequency (Hz) 1G 1 1M 10G 1G 10G 1G 10G 0 -3 -3 LCF160804A750TG -6 -9 Insertion Loss(dB) Insertion Loss(dB) 100M Frequency (Hz) Differencial Mode S21 0 -12 -15 -18 -21 -12 -15 -18 -21 -24 -27 -27 -30 -30 10M 100M Frequency(Hz) © 2017 Littelfuse Revised: 06/23/17 Specifications are subject to change without notice. 1G 10G LCF160804A750TG -9 -24 -33 1M 10M LCF160804A750TG Transmission Characteristics (S-parameter) Common Mode S21 -6 100 -33 1M 10M 100M Frequency(Hz) littelfuse.com Common Mode Noise Filter LCF Series 2012mm size Impedance Curves (Common Mode) Impedance Curves (Differencial Mode) 10k 10k ICMF212P121MFR ICMF212P900MFR ICMF214P300MFR ICMF214P101MFR ICMF214P181MFR 1k Impedance (Ω) Impedance (Ω) 1k 100 100 10 10 1 1M 10M 100M Frequency (Hz) 1G 1 1M 10G Transmission Characteristics (S-parameter) Common Mode S21 0 -6 -6 Insertion Loss(dB) -18 -12 ICMF214P300MFR ICMF214P101MFR ICMF214P181MFR -24 -30 -18 -42 -42 100M Frequency(Hz) © 2017 Littelfuse Revised: 06/23/17 Specifications are subject to change without notice. 1G 10G 1G 10G ICMF212P900MFR ICMF214P300MFR ICMF214P101MFR ICMF214P181MFR -30 -36 10M 100M Frequency (Hz) -24 -36 -48 1M 10M Differencial Mode S21 0 -12 Insertion Loss(dB) ICMF212P121MFR ICMF212P900MFR ICMF214P300MFR ICMF214P101MFR ICMF214P181MFR -48 1M 10M 100M Frequency(Hz) 1G 10G littelfuse.com Common Mode Noise Filter LCF Series 3008 mm size Impedance Curves (Common Mode) 10k Impedance Curves (Differencial Mode) 10k LCFE300806A750TG LCF300806A750TG 1k Impedance (Ω) Impedance (Ω) 1k 100 10 10 1 1M 10M 100M Frequency (Hz) 1G 1 1M 10G Transmission Characteristics (S-parameter) Common Mode S21 1G 10G 1G 10G -3 LCF300806A750TG -6 -9 Insertion Loss(dB) Insertion Loss(dB) 100M Frequency (Hz) 0 -3 -12 -15 -18 -21 -24 LCF300806A750TG -9 -12 -15 -18 -21 -24 -27 -27 -30 -30 -33 1M 10M Differencial Mode S21 0 -6 100 10M 100M Frequency(Hz) © 2017 Littelfuse Revised: 06/23/17 Specifications are subject to change without notice. 1G 10G -33 1M 10M 100M Frequency(Hz) littelfuse.com Common Mode Noise Filter LCF Series Soldering Parameters Pre Heat Pb-free assembly - Temperature Min (Ts(min)) 160°C - Temperature Max (Ts(max)) - Time (Min to Max) (ts) 185°C 100 − 120 seconds Average Ramp-up Rate (Liquidus Temp (TL) to peak) 1°C/second max TS(max) to TL - Ramp-up Rate 1°C/second max Reflow - Temperature (TL) (Liquidus) - Temperature (tL) 220°C 30 − 50 seconds Peak Temperature (TP) 260+0/-5°C Time within 5°C of actual peak Temperature (tp) 5 − 10 seconds Ramp-down Rate 2°C/second max Time 25°C to Peak Temperature (TP) 4 minutes max Do not exceed 260°C Wave Soldering 260°C, 10 sec. max tP TP Critical Zone TL to TP Ramp-up TL TS(max) Temperature Reflow Condition tL Ramp-down Preheat TS(min) 25 tS time to peak temperature (t 25ºC to peak) Time Recommended Soldering Profile ( Lead free condition) Product Characteristics Lead Pull Strength 5N Operating Temperature -40ºC to +85ºC (consider re-rating) Solderability 260ºC, ≤10s (Reflow), Max 380ºC, ≤5s (Soldering iron) Climatic Category -40ºC + 85ºC/8 days Soldering Heat Resistance Max 260ºC 10sec(Wave), Max Temperature: Max 380ºC (Max 5sec) Stock Conditions Vibration Resistance © 2017 Littelfuse Revised: 06/23/17 Specifications are subject to change without notice. -10ºC + 40ºC RH, ≤ 70% 5 g’s for 20 minutes, 12 cycles each of three orientations littelfuse.com Common Mode Noise Filter LCF Series Dimensions (Unit = mm) Recommended Footprint and Stencil Mask 0605mm size 0605mm size 0806mm size 0806mm size 1210mm size 1210mm size 1608mm size 1608mm size © 2017 Littelfuse Revised: 06/23/17 Specifications are subject to change without notice. Stencil Mask T = 0.10mm littelfuse.com Common Mode Noise Filter LCF Series LCF Series Dimensions (Unit = mm) Recommended Footprint and Stencil Mask 2012mm size (LCF201202A121TG, LCF201202A121TG) 2012mm size (LCF201202A121TG, LCF201202A121TG) 2012mm size (LCF201204A300TG, LCF201204A101TG, LCF201204B101TG, LCF201204C101TG, LCF201204A181TG) 2012mm size ( LCF201204A300TG, LCF201204A101TG , LCF201204B101TG , LCF201204C101TG, LCF201204A181TG) 3008mm size 3008mm size © 2017 Littelfuse Revised: 06/23/17 Specifications are subject to change without notice. Stencil Mask T = 0.10mm littelfuse.com Common Mode Noise Filter LCF Series Carrie Tape Dimensions 0605mm size Dimensions Symbol Tape and Reel Dimension Millimeters A 0.62±0.03 B 0.78±0.03 E 1.75±0.05 F 3.50±0.05 D0 1.55±0.03 P1 2.00±0.05 P2 2.00±0.05 P0 4.00±0.05 10P0 40.00±0.10 W 8.00±0.10 T 0.40±0.02 T’ 0.43±0.05 0605mm size COVER TAPE TAPE W BACK (BOTTOM) TAPE D C E REEL B R Empty Section 45 PITCH Chip Mounting Section Empty Section Leading Section 50 PITCH 35 PITCH t A (1) Reel Materials: Polystyrene (2) Label (3) Taping - Standard Packing Quantity per Reel (Ø178) - PE Tape: 10,000pcs Code A B C D E W T R Dimension Ø178±2 Min. Ø50 Ø13±0.5 Ø21±0.8 2.0±0.5 10±1.5 0.8±0.2 1.0 © 2017 Littelfuse Revised: 06/23/17 Specifications are subject to change without notice. littelfuse.com Common Mode Noise Filter LCF Series Carrie Tape Dimensions 0806mm size Dimensions Symbol Tape and Reel Dimension Millimeters A 0.80±0.03 B 1.02±0.03 E 1.75±0.05 F 3.50±0.05 D0 1.55±0.03 P1 2.00±0.05 P2 2.00±0.05 P0 4.00±0.05 10P0 40.00±0.10 W 8.00±0.10 T 0.60±0.02 T’ 0.63±0.05 0806mm size COVER TAPE TAPE W BACK (BOTTOM) TAPE D C E REEL B R Empty Section 45 PITCH Chip Mounting Section Empty Section Leading Section 50 PITCH 35 PITCH t A (1) Reel Materials: Polystyrene (2) Label (3) Taping - Standard Packing Quantity per Reel (Ø178) - PE Tape: 10,000pcs Code A B C D E W T R Dimension Ø178±2 Min. Ø50 Ø13±0.5 Ø21±0.8 2.0±0.5 10±1.5 0.8±0.2 1.0 © 2017 Littelfuse Revised: 06/23/17 Specifications are subject to change without notice. littelfuse.com Common Mode Noise Filter LCF Series Carrie Tape Dimensions 1210mm size FEEDING HOLE CHIP INSERTING HOLE D E A F W B P0 t P2 Dimensions Millimeters Symbol P1 A 1.15±0.05 B 1.50±0.05 W 8.00+0.30-0.10 F 3.50±0.05 E 1.75±0.05 P1 4.00±0.10 P2 2.00±0.05 P0 4.00±0.05 D 1.55±0.03 T 0.75±0.05 Tape and Reel Dimension 0806mm size COVER TAPE TAPE W BACK (BOTTOM) TAPE D C E REEL B R Empty Section 45 PITCH Chip Mounting Section Empty Section Leading Section 50 PITCH 35 PITCH t A (1) Reel Materials: Polystyrene (2) Label (3) Taping - Standard Packing Quantity per Reel (Ø178) - PE Tape: 4,000pcs Code A B C D E W T R Dimension Ø178±2 Min. Ø50 Ø13±0.5 Ø21±0.8 2.0±0.5 10±1.5 0.8±0.2 1.0 © 2017 Littelfuse Revised: 06/23/17 Specifications are subject to change without notice. littelfuse.com Common Mode Noise Filter LCF Series Carrie Tape Dimensions 1608mm size FEEDING HOLE CHIP INSERTING HOLE D E A F W B P0 t P2 P1 Symbol Dimensions Millimeters A 0.97±0.03 B 1.80±0.03 W 8.00±0.10 F 3.50±0.05 E 1.75±0.05 P1 4.00±0.10 P2 2.00±0.05 P0 4.00±0.05 D 1.55±0.03 T 0.58±0.03 Tape and Reel Dimension 1608mm size COVER TAPE TAPE W BACK (BOTTOM) TAPE D C E REEL B R Empty Section 45 PITCH Chip Mounting Section Empty Section Leading Section 50 PITCH 35 PITCH t A (1) Reel Materials: Polystyrene (2) Label (3) Taping - Standard Packing Quantity per Reel (Ø178) - PE Tape: 4,000pcs Code A B C D E W T R Dimension Ø178±2 Min. Ø50 Ø13±0.5 Ø21±0.8 2.0±0.5 10±1.5 0.8±0.2 1.0 © 2017 Littelfuse Revised: 06/23/17 Specifications are subject to change without notice. littelfuse.com Common Mode Noise Filter LCF Series Carrie Tape Dimensions 2012mm size FEEDING HOLE CHIP INSERTING HOLE D Symbol E A F W B P0 t P2 P1 Dimensions Millimeters A 1.55±0.05 B 2.30±0.05 W 8.00±0.10 F 3.50±0.05 E 1.75±0.05 P1 4.00±0.10 P2 2.00±0.05 P0 4.00±0.10 D 1.55±0.03 T 0.95±0.05 Tape and Reel Dimension 2012mm size COVER TAPE TAPE W BACK (BOTTOM) TAPE D C E REEL B R Empty Section 45 PITCH Chip Mounting Section Empty Section Leading Section 50 PITCH 35 PITCH t A (1) Reel Materials: Polystyrene (2) Label (3) Taping - Standard Packing Quantity per Reel (Ø178) - PE Tape: 4,000pcs Code A B C D E W T R Dimension Ø178±2 Min. Ø50 Ø13±0.5 Ø21±0.8 2.0±0.5 10±1.5 0.8±0.2 1.0 © 2017 Littelfuse Revised: 06/23/17 Specifications are subject to change without notice. littelfuse.com Common Mode Noise Filter LCF Series Carrie Tape Dimensions 3008mm size FEEDING HOLE CHIP INSERTING HOLE D Symbol E A F W B P0 t P2 P1 Dimensions Millimeters A 1.05±0.05 B 3.30±0.05 W 8.00±0.10 F 3.50±0.05 E 1.75±0.05 P1 4.00±0.10 P2 2.00±0.05 P0 4.00±0.10 D 1.55±0.03 T 0.60±0.05 Tape and Reel Dimension 3008mm size COVER TAPE TAPE W BACK (BOTTOM) TAPE D C E REEL B R Empty Section 45 PITCH Chip Mounting Section Empty Section Leading Section 50 PITCH 35 PITCH t A (1) Reel Materials: Polystyrene (2) Label (3) Taping - Standard Packing Quantity per Reel (Ø178) - PE Tape: 4,000pcs Code A B C D E W T R Dimension Ø178±2 Min. Ø50 Ø13±0.5 Ø21±0.8 3.0±0.5 10±1.5 1.3±0.2 1.0±0.2 © 2017 Littelfuse Revised: 06/23/17 Specifications are subject to change without notice. littelfuse.com Operating Temperature -40°C to +85°C (Consider re-rating) Common Mode Noise Filter Climatic Category -40°C / +85°C / 21days LCF Series (IEC60068-1,-2-1,-2-2,-2-78) Stock Condition +10°C to +60°C relative humidity 75% yearly average, without dew, maximum value for 30 days-95% Vibration Resistance 24 cycles at 15min. Each (IEC60068-2-6) 10 - 60 Hz at 0.75 mm amplitude 60 - 2000 Hz at 10g acceleration Ordering Information Part Numbering Part Numbering System System LCF 0605 02 A 650 T G Part Number Reel Quantity LCF0605xxxxxxx/LCF0806xxxxxxx 10,000 LCF1608xxxxxxx/LCF1210xxxxxxx Function LCF2012xxxxxxx/LCF3008xxxxxxx Common Mode Noise Filter 4,000 Series and Dimensions (L x W x T, mm ) 0.64 x 0.57 x 0.35 Number of Lines Internal Code Common Mode Impedance (@100MHz), 650 = 65Ω Tape and Reel Green Quantity 1,400 1,400 1,400 1,400 Quantity & Packaging Code D00B D00B D00B D00B © 2017 Littelfuse Revised: 06/23/17 Specifications are subject to change without notice. Taping Width N/A N/A N/A N/A littelfuse.com